Tryimg to install an update and is error8024401B

I have to do in order to get the update the sysm and avoid the error = 8024401 b

Hi jed650,

If you receive the Windows Update 8024401 b error when searching for or installing updates, a problem prevented your proxy server to your network credentials. A proxy server is a server used by your computer to connect to the Internet or a network and, in this case, to download updates. Follow these steps to provide your credentials and install available updates.

   
 

1.

Open Windows Update by clicking the Start button, all programsand then click Windows Update.

2.

In the left pane, click check for updates.

3.

If you are prompted, provide your network credentials. If Windows does not prompt you to provide credentials and you see the 8024401 b instead of this error code, click try again.

4.

When you are prompted, provide the credentials that you use to access your network (for example, your user name and a password). Windows continue to update automatically and notify you if you need to install updates.

http://windowshelp.Microsoft.com/Windows/en-us/help/cd1c2f39-7895-734a-7541-477af546b3b11033.mspx

I hope this will help you.

Thanks and greetings
Rehman

Tags: Windows

Similar Questions

  • My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

    My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

    If she needs your Apple ID password and you have enabled 2-factor authentication, you might have to temporarily disable the connection to complete.

    Also, you need an internet connection to perform this step here.

    If your problem is not of the above, please describe more completely. Furthermore, to give specific messages on the screen.

  • The error code is 00000643. I can't install the update and I think it comes to Netframe.

    I can't install this update and I keep getting the error code 00000643. What should I do?

    When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
    http://support.Microsoft.com/kb/976982

    =====================

    Step #1 => foremost, note what version of .NET Framework is installed:

    How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
    http://support.Microsoft.com/kb/318785

    Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

    After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

    NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

    IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

    1. the .net framework 3.5, then...
    2 .net framework 1.1, then...
    3 .net framework 1.1 SP1

    NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the relatedhttp://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

    Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  • A few days ago I installed some updates and since then, Norton does not work. It shows a red exclamation point.

    Original title: norton malfunction

    A few days ago I installed some updates and since then, Norton does not work. It shows a red exclamation point.
    Help, please.

    Contact Norton support. It's their product.

  • I am trying to install Windows Update and get 800F080D for IE9. Why?

    I am trying to install Windows Update and get 800F080D for IE9.  Why?

    Hi KevinMiller


    1. don't you get the error only during the installation of internet explorer 9?
    2. when exactly you get the error message?
    3. that you get an error when installing other windows updates?

    I suggest you to check if you have all the prerequisites installed for internet explorer 9.

    http://support.Microsoft.com/kb/2399238


    Refer also to the links below and check if you did all requirements before installing internet explorer 9.
    http://support.Microsoft.com/kb/2409098

    http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

     

    I hope this helps.

  • try to install 2 updates and it fails saying unknown error 8007064 C and 64 c?

    I tried to install 2 updates and they both say impossible to install it gives me unknown error 8007064 C and C. 64 understand not

    Thank you Jean Linhart

    Hello

    1. which windows update you are installing?

    2 are you able to install other updates to windows?

    3. have you made changes on your computer?

    I also suggest you to follow the link to the error 8007064 and 64 C

    Error code when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0x8007064C.

    http://support.Microsoft.com/kb/958055

  • I can't install the new application on my iphone 5s revel.  I tried to install the update, and that did not work.  I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

    I can't install the new application on my iphone 5s revel.  I tried to install the update, and that did not work.  I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

    Please see the post below updates on the issue of the revel facilities:

    Problem installing Adobe Revel 2.3.2

  • How to install this update and resolve problems of USB and the touchpad?

    I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
    Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

    The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

    The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

    This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
    Driver revision history:
    Twinhan VP704A Driver Release Notes
    -------------------------------------------------------------------------------
    Note:
    1. in the event that the system hangs when running with VP704A, please install ULI
    Host USB 2.0 in \ULiUSB20Driver driver

    2. for XP/SP1, please update with the patch in

    3. in XP/SP1, update driver will crash the system, while the new facility is ok.
    The trick to update driver XP/SP1 is illustrated in the following steps,
    a. uninstall the driver
    b. disconnect and reconnect the USB device
    c. install the driver
    4 to support the controller remotely, please launch Agent.exe in \Agent.
    Further details at \Agent\Readme.txt

    Known issues:
    1 multi-instance is not supported
    2 remote wakeup is not supported
    3. strong use of the processor from analog video/audio capture
    4. bad Signal using color YUY2 format IST
    5 AV sync if audio captured the wrong filter.
    (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
    6. noise with analog TV and FM Radio
    (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

    Driver revision history:
    -------------------------------------------------------------------------------
    2005-10-24, version: 1.0.2.8
    Bugs fixed and new features:
    1 is not correctly configured.
    -------------------------------------------------------------------------------
    2005-10-21, version: 1.0.2.7
    Bugs fixed and new features:
    1. the firmware version read FLASH OK!
    -------------------------------------------------------------------------------
    2005-10-14, version: 1.0.2.6
    Bugs fixed and new features:
    1.MUtil - access driver empty part lower part of screen when IST!
    2.MUtil - access HCT pilot check fix crash!
    -------------------------------------------------------------------------------
    2005-10-07, version: 1.0.2.5
    Bugs fixed and new features:
    1 tuner turns off when S-Video, Composite.
    -------------------------------------------------------------------------------
    30/09/2005, version: 1.0.2.4
    Bugs fixed and new features:
    1.agent.exe update for repeat bug!
    2.TI5150 sign up to fix video Format!
    -------------------------------------------------------------------------------
    2005-09-29, version: 1.0.2.3
    Bugs fixed and new features:
    1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
    Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
    2 reset TI5150 when a new frequency is defined
    -------------------------------------------------------------------------------
    2005-09-27, version: 1.0.2.2
    Bugs fixed and new features:
    1. difficulty I2C unstable access on some devices.
    -------------------------------------------------------------------------------
    2005-09-23, version: 1.0.2.1
    Bugs fixed and new features:
    1. analog TV becomes sometimes darker.
    -------------------------------------------------------------------------------
    15/09/2005, version: 1.0.2.0
    Bugs fixed and new features:
    1. difficulty of installation INF for Windows 2000.
    2 FM scan radio policy changed!
    -------------------------------------------------------------------------------
    13/09/2005, version: 1.0.1.9
    Bugs fixed and new features:
    1 USB string serial number not visible with USBView, updated firmware required.
    2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
    -------------------------------------------------------------------------------
    13/09/2005, version: 1.0.1.8
    Bugs fixed and new features:
    1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
    -------------------------------------------------------------------------------
    12/09/2005, version: 1.0.1.7
    Bugs fixed and new features:
    1. improve the performance of check channel lock status
    2 pinnacle INF Fix.
    -------------------------------------------------------------------------------
    2005-09-09, version: 1.0.1.6
    Bugs fixed and new features:
    1. Add an audio initialization function.
    -------------------------------------------------------------------------------
    2005-08-31, version: 1.0.1.5
    Bugs fixed and new features:
    1 separation of PAL and NTSC resolution mode.
    -------------------------------------------------------------------------------
    2005-08-30, version: 1.0.1.4
    Bugs fixed and new features:
    1.AvgTimePerFrame.
    2 frame drop.
    3 pinnacle inf file HCT chkinf fail.
    -------------------------------------------------------------------------------
    2005-08-22, version: version 1.0.1.3
    Bugs fixed and new features:
    1. add remote control interface in digital source filter.
    2.A new remote test tool that contains of the source code in \Test_RC.
    -------------------------------------------------------------------------------
    2005-08-16, version: 1.0.1.2
    Bugs fixed and new features:
    1. Pinnacel & Twinhan driver & file reorg.
    2.VP704A_BDA_Test tool, add a test to the system code.
    3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
    4 firmware update
    -------------------------------------------------------------------------------
    2005-08-15, version: 1.0.1.1
    Bugs fixed and new features:
    1 serial number feature is lost when the audio volume of the TV control
    2.RC6A support CIR
    (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
    The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
    EEPROM must be flashed with \Firmware\M9207.bin)
    3 Serieal, MAC address and name of device OEM taken in charge.
    Please see for more details on the \Firmware\readme.txt.
    4 Ioclt example source code included.
    -------------------------------------------------------------------------------
    08/08/2005, version: 1.0.0.10
    Bugs fixed and new features:
    1. increase audio volume analog TV.
    -------------------------------------------------------------------------------
    04/08/2005, version: 1.0.0.9
    Bugs fixed and new features:
    1. analog TV Video mode failed.
    -------------------------------------------------------------------------------
    2005-08-03, version: 1.0.0.8
    Bugs fixed and new features:
    1.off - centerf frequency scan + / 125Khz
    2 difficulty program a copy scanned in MCE.
    -------------------------------------------------------------------------------
    02/08/2005, version: 1.0.0.7
    Bugs fixed and new features:
    1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
    -------------------------------------------------------------------------------
    2005-07-28, version: 1.0.0.6
    Bugs fixed and new features:
    1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
    2. improve the stability of I2C communication.
    3 unify signaling resistance & quality as a THBda ioctl interface.
    4 capture filter lock state control.
    -------------------------------------------------------------------------------
    2005-07-28, version: 1.0.0.5
    Bugs fixed and new features:
    1. the same strength & quality signals as VP7046.
    2 debug build pilot
    -------------------------------------------------------------------------------
    2005-07-21, version: 1.0.0.4
    Bugs fixed and new features:
    1. put the INF update.
    -------------------------------------------------------------------------------
    2005-07-20, version: 1.0.0.3
    Bugs fixed and new features:
    1 improve performance in PCM4
    2 passage of the analog TV Mode to FM Mode failure
    -------------------------------------------------------------------------------
    2005-07-04, version: 1.0.0.2
    Bugs fixed and new features:
    1. production tool FM test OK!
    --------------------------------------------

    And here is the Readme file from the other file in the update?

    ************************************************** ************************************************
    ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
    ************************************************** ************************************************

    ----------------
    INTRODUCTION
    ----------------

    This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
    and Windows XP.

    -------------------------
    CONTENTS OF THIS DOCUMENT
    -------------------------

    1. installation instructions
    2. uninstall instructions

    ----------------------------
    1. installation instructions
    ----------------------------

    (Windows 98SE & Windows ME)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver files in your Windows system, and then restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver files to your Windows system, then turn off your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    (Windows 2000)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will install and load the driver and you do not have to restart the
    computer.
    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver in your Windows system files, before turning itself off
    your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    (Windows XP)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -Click "NEXT".
    -This program will install and load the driver and you do not have to restart the
    computer.
    -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
    Hub. " Please select "Install the software automatically (recommended)" and then
    Click 'Next' to continue the installation.
    -This program will install and load the driver and you do not have to restart the
    computer.
    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver in your Windows system files, before turning itself off
    your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller', proceed with the installation.
    -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
    Hub. " Please select "Install the software automatically (recommended)" and then
    Click 'Next' to continue the installation.

    Notice:
    If you can not configure driver successfully. Please restart your system, then follow
    steps to reinstall driver above.

    ------------------------------
    2. uninstall instructions
    ------------------------------

    1. open the "Control Panel" folder.
    2 call the "Add/Remove Programs" icon
    3 choose the "ULi USB2.0 Driver" section.
    4. click on the "add/delete" button to remove drivers.

    -----------------------------------
    Change list:
    -----------------------------------
    1.74
    1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
    2. support all USB2.0 Host Controller.
    1.73
    1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
    2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
    3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
    4 solve problem as wirless lan will disconect when the plug in usb device.

    1.72
    1 fix that system crash when HD USB copy large files.

    1.71
    1. improve the management of power in Win98 / Me.

    1.70
    1. improve the devcie detection function.

    1.62
    1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

    1.61
    1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

    1.60
    1. in support of functions power management when a HUB with the USB plug in device
    a root HUB.

    1.57
    1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
    2. fix audio problem that can not display smooth when peripheral USB connect to the system.
    3. fix system cannot detect DVICE USB when the USB device attached to the system in
    suspend mode.
    4 fix when root USB HUB have a full load, USB HD sometimes
    failure of the transaction.

    1.56
    1 fix that device of DVD decoder cannot display correctly.

    1.55
    1. fix OTI USB 2.0 drive hand cannot detect question.
    2. attach the USB mouse cannot be used after the resumption of hanging.

    1.54
    1. to improve the safety of the driver.

    1.53
    1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
    2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

    1.52
    1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
    automatically fix file system errors
    2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

    v.1.51
    1. to improve the compatibility of USB 2.0 card reader.
    2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

    v1.50
    1. improve the transfer block

    v1.48
    1. difficulty of installation of the USB 2.0 LAN driver hangs up
    2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
    3. fix some laptops starting hanging Win98SE

    v1.47
    1. improve the performance of bulk transfer.
    2. fix the failure of USB 2.0 Preview in bulk webcam.

    v1.46
    1. support USB 2.0 and 1.1 devices isochronous
    2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
    3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
    4. improve the capacity of the device detection in Win9X / ME

    v1.45
    1. fix system hang up when the mode standby ACPI.
    2. attach the mouse sometimes does not disappear when it is unplugged.
    3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

    v1.44
    1. composite crutch
    2 improve the detection of devices

    v1.43
    1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
    2 difficulty at high peripheral speed detected as full-speed device
    3. fix some problem of failure detection USB mouses
    4. fix some problem USB 2.0 Hub failure detection
    5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

    v1.42
    1. fix PC Card eject hang up in Win98 / ME
    2 difficulty of interruption/resumption hang up in Win98
    3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
    4. fix some failure detection of PC Card USB 1.1 devices

    v1.41
    1. Add new feature that system can install the driver ahead of the device is plugged in.
    2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

    v1.40
    1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
    2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

    v1.32
    1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
    If the path of the OS is not c:\windows.
    2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

    v1.31
    1. Fix problem that driver cannot install on Windows 2000.

    v1.30
    1 fix than Win9X / shows ME no USB 2.0 hub.
    2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
    3 Fix problem that sometimes when you click on "search the hardware changes.
    for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
    file is not found.
    4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
    verison of ULi EHCI controllers devices are connected and disconnected.
    5 install the driver support for several features of controller EHCI ULi existing on
    system at the same time.
    6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

    v1.20
    1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

    ULi Coporation. (ULi) web sites:
    http://www.Uli.com.tw/ (Taiwan)

    CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

    I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

    It is said above 2 relevant and 1 right ANSWER available...

    I'm new here, so anyone could direct me to these answers?

  • 00000646 error code when you install windows updates and upgrades security for the windows desktop.

    When I try to download windows office updates and security of office windows dates I get an error code 00000646. I don't use windows desktop and I did not sign up for the windows desktop. could this way is not not the administrator of windows on my computer desktop, this is the reason why I can't download these dates?

    Hello

    Here's what I recommend:

    1 disable UAC. Down comes the restrictions - turn it off completely.
    2 restart your computer for the change to take effect.
    3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
    4. install. It should work fine.
    5. If it still does not work, try to open all or part of your MS Office applications.
    6. follow step 3.

    Let me know your results.

  • Cannot install windows updates and updates history screen is empty.

    I can't install the windows updates. I have Windows Vista Home Premium. My automatic update is running... I studied and thought that the problem was with some service pack 2 I had to install - I did and nothing helped. My windows update history page is completley empty and Iwonder why. Also, I now can't seem to connect my Nokia phone to my computer as he finds the right driver online, but then it cannot install it. Can someone tell me what on Earth is cause of these problems. Thank you

    The computer had only preinstalled Norton or McAfee, but I've since deleted these programs because I found them to be boring...

    A properly installed, fully functional anti-virus application should never be boring. Although that pretty much excludes from the application of all the Norton and McAfee in my humble OPINION, there are others available.

    See...

    Cleaning a compromised system
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for freeand download/run the appropriate removal tool before installing updates, Service Packs, Windows or the IE upgradesand before installing your new anti-virus application.

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Risks & benefits of P2P file sharing
    http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
    http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    If you need help, please start a new thread in this forum:

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    Wish I had better news for you! Good luck.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I can't install Windows Update and instant messaging

    I am currently using Windows Vista on the desktop, I tried to update the Windows Update for a few months now. Windows Update checks the updates and State it is 36 important updates.
    But when I try to download the updates, a few error codes are displayed. The error codes are A 80071, 30 and 643.

    I tried to access Windows Defender and he spent 2 hours after scanning my computer, he is unable to check for definition updates (error code is 0 x 80244015.

    Recently, I also tried to access instant messaging Windows, but it prompted me to update to the last Messenger until I can use it. Windows Live install managed to run, but then the download will fail again.  I think it's also because of the inability to access Windows Update?

    Help, please! I'm trying to find the problem.

    Thank you very much!

    We use Trend Micro Internet Security Pro (installed since 03/20/2009) as our main Anti Virus app for less than a year and the subscription is still valid...

    Other security applications are Registry Repair Pro (the free version, install Date: 28/02/2008)...

    Yes, Norton has been previously installed on the machine when we bought it first. However, it has since been removed from the beginning using Trend Micro.

    Uninstall Registry Repair Pro & reboot. If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

    Norton applications are notorious for not properly uninstall.

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    Test.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I tried for weeks install windows updates and get this message error (s) found: code 80070645 windows has encountered an unknown error. How can I solve this problem?

    Windows Update
    Error (s) found: code 80070645 windows has encountered an unknown error.
    I had before the shock of two antivirus this proven system restoration started but no help.
    Fix it to charge microsoft, but has not helped any.

    How can we if this problem, so I can install the updates I need?

    Hi Wyattsdaddy,

    Thanks for posting your question.

    Step 1: Check if Windows update-related services are set to automatic and started.

    Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

    Check the above services below:
    (a) Background Intelligent Transfer Service
    (b) cryptographic service
    (c) Windows Update

    Step 2: Rename the Catroot2 folder

    To rename the Catroot2 folder, follow these steps:

    1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
    2. at the command prompt, type the following commands and press ENTER after each line:

    net stop cryptsvc
    Ren %systemroot%\System32\Catroot2 oldcatroot2
    net start cryptsvc
    output

    3 remove all tmp*.cat to the following folder:

    % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

    If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

    Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

    Step 3: Reregister DLL files that are associated with Cryptographic Services

    To register .dll files that are associated with Cryptographic Services, follow these steps:

    1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

    2. at the command prompt, type the following commands and press ENTER after each command:

    regsvr32 /u softpub.dll
    regsvr32 /u wintrust.dll
    regsvr32 /u initpki.dll
    regsvr32 /u dssenh.dll
    regsvr32 /u rsaenh.dll
    regsvr32 /u gpkcsp.dll
    regsvr32 /u sccbase.dll
    regsvr32 /u slbcsp.dll
    regsvr32 /u mssip32.dll
    regsvr32 /u cryptdlg.dll

    regsvr32 softpub.dll
    regsvr32 wintrust.dll
    regsvr32 initpki.dll
    regsvr32 dssenh.dll
    regsvr32 rsaenh.dll
    regsvr32 gpkcsp.dll
    regsvr32 sccbase.dll
    regsvr32 slbcsp.dll
    regsvr32 mssip32.dll
    regsvr32 cryptdlg.dll
    output

    Note: Click OK if prompted.

    Restart the computer.

    Step 4: Empty the software distribution folder

    1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
    2. in the Services (Local) pane, click Automatic updates and then click on stop.
    3. reduce the Services (local) window.
    4. Select all the contents of the Windows distribution folder, and then delete them.

    Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
    5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
    6. in the Services (Local) pane, click Automatic updates, and then click Start.
    7 restart the computer, and then run Windows Update again.

    Item appraised: http://support.Microsoft.com/default.aspx/KB/822798

    Step 5: Disable the security software
    Note: You can enable it later.
    Step 6: Scan Run SFC
    Please follow the steps below to the auditor of the filesystem as the first steps:

    1. Click Start and type cmd in the box start the search.
    2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
    3. at the command prompt, type Sfc/scannow, and then press ENTER.

    Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
    http://support.Microsoft.com/kb/949104/

    Step 7: Components to reset Windows Update
    http://support.Microsoft.com/kb/971058

    Let us know if that helps.

    Kind regards
    Clement Kumar.

    Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

  • When start Fable 3 asks to install the update and it fails error code 0 x 80070002

    Original title: problem loading Fable III

    I recently bought Fable III and installed.

    When loading the game, I said that I need to connect to Windows Live to play. I put in my Windows Live account information, it displays a message telling me it is download my profile and then another message appears telling me I need to install an update to continue. When I try to install the update however, it tells me that failure, citing the code 0 x 80070002. And then told me that I need to connect to play but when I try to do, it tells me my profile has not been downloaded and I need to go into the details of my account again. I do this, and then the whole cycle starts again.

    Any help to solve this problem would be welcome. Thank you.

    Hello

    ·         The installation of Fable was successful?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: You can try the steps that are listed in Microsoft Knowledge Base article and check if it helps.

    You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

    http://support.Microsoft.com/kb/910336

     

    Method 2: I suggest to read the following article and check.

    Error message when you try to update a Microsoft Windows-based computer: "0 x 80070002.

    http://support.Microsoft.com/kb/922582

     

    Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.

    http://support.Microsoft.com/kb/956698

    Let us know if that helps.

  • Cannot install windows updates and also msconfig, regedit, Task Manager won't open?

    Hello

    I use windows xp professional sp3.

    Nothing happens when I try to run msconfig, regedit, Task Manager, etc.. They don't open even in Safe Mode.

    Apart from that, windows update is not able to install updates and repeatedly tries to install the same updates again and again and fails permanently.

    Sometimes, when I try to run some .exe files, I get an error message... 'not a win32 application valid', even if its a win32 version.

    The boot.ini file is missing. I've already replaced the missing hosts files.

    Could someone help me please?

    Concerning

    ND

    Hello ndastolwala,

    In addition to the entrance of Allen Howard, you can also try a repair installation.  I have included the link below and hope that this can help out you.

    Repair the Windows XP installation:

    http://support.Microsoft.com/kb/917964

    Thank you

    James

  • Error code: 0 x 57 while trying to install Office updates and error: 1402: Setup cannot Cholakov registry key

    Original title: failure of the updates to download and installation failed request due to registry

    Running XP PROFESSIONAL - two questions...

    • Automatic download of updates of window failed.

    Error code: 0x57A on

    1. Update of security for Microsoft Office Excel 2003 (KB2541025)
    2. Update for Microsoft Office 2003 (KB2539581)

    Error code: 0 x 80070652.

    1. Update of security for Microsoft Office 2003 (KB2509503)
    2. Update of security for Microsoft Office Excel 2003 (KB2541025)
    So I tried looking for a solution and came across a blog that said I should turn off my antivirus and try again.  Did not work.  The blog suggested that MS Office to uninstall and reinstall. So I did.  Uninstalled MS Professional and then tried to re - install...
    • message received Error - 1402

    The installation program cannot Cholakov registry key

    HKEY_LOCAL_MACHINE\SoftWare\Microsoft\CurrentVersion\Run\OptionalComponents\MSFS

    Can someone say if these two things are related or how to fix it.  I was stupid and didn't return to the top.

    Hi jbb59,
     
    -Can install you any other updates without any problems?
    -You receive this mCode error while trying to install Office updates only?
     
    Error 80070652 means that a previous installation is not completed successfully. Restart the computer usually solves this problem.
     
    Try the methods listed in the articles given below to resolve this issue:
     
     

Maybe you are looking for