trying to do a clean installation of windows vista by using the dvd

Similar Questions

• I'm trying to back up my files on windows vista, but still, the operation fails.

  trying to back up files, I get the following error message: access denied (0x80070005). What - what it means and how to solve the error message?

  Hello

  ·         What are you trying to backup?

  ·         What type of backup you're trying to do?

  ·         Where are you trying to backup?

  ·         All third-party backup software that you are using?

  Method 1:

  I suggest you to run a check disk on the system. Follow the steps mentioned in the article below.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:

  I suggest that you clean start State to check and verify if you are able to backup. Follow the steps mentioned in the article below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

• After the installation of Windows Vista, I get the error message "" windows/System / * ' file was not found "

  Original title: after the new installation of windows Vista it does not work.

  After the new installation of windows Vista on my laptop Lenovo at startup, it displays "windows/System / *" file could not be found... I also tried to fix.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  If you continue to have problems with it contact lenovo

  http://www.Lenovo.com/us/en/index.html

• While performing a clean installation of Windows Vista, I get to the part "select driver to be installed" but there is no driver. What is going on?

  Select the driver to be installed problem during installation (Vista 32 bit)?

  So, I finally managed to get my office to start the disc because im trying to do a clean install because my family somehow acquiring an infection of Hadily on it. However as soon as I get to the part "select the driver to install" installation my computer comes up with nothing = / I scanned the Boot(x:) et le disque local (c), but it says that there is no drivers are found to install.) I don't understand what is happening? shouldn't the disc have everything you need? I was told "to put versions textmode of my SATA interface on a Flash DRIVE or a CD driver" but I don't know how to do this.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  It will be useful.

• Clean installation of windows vista Professional (copy provided by msdn)

  Hello

  I have some old windows XP SP2 and sys. specs are Intel 3 Ghz processor and 2 GB of ram
  The hard drive is only 40 GB
  I'm upgrading my computer (only the operating system) and you want to install the copy of windows vista business - provided by MSDN
  Here's the problem
  I've logged into my account and have a free copy, so when I try to download it through me the 4 step procedure and wants to be stored (downloaded) directly online in the TEMP FOLDER.
  -> (download, authorization, unpacking and installation processes).
  I want to do a clean install of VISTA professional AND would like to get rid of windows XP SP2.
  How would do this, because I wonder to execute a procedure of the 4 step (see arrow above).
  Would appreciate suggestions and help.
  Thank you
  MT

  Hello mt4448,

  MSDN software are downloaded as ISO files (finally they do when I download them). The ISO must be burned on a DVD and then it is simply a case of starting your PC, insert the DVD into your DVD drive and then restarting the PC again. You do not want to check that your DVD player is your first boot drive if the installation does not start.

  Take a look at this link from my Web site: http://vistasupport.mvps.org/install_windows_vista.htm

  Also visit this link to change the priority of the disc: http://xphelpandsupport.mvps.org/how_do_i_enable_cdrom_support_i.htm

  If you have a modern PC 2 to 3 years already, the CD/DVD drive should be set as first boot option.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I'm unable to complete the installation of Windows Vista. At the end of the installation it says "winload.exe is missing or damaged.

  Hi my name is Corey and I have a huge problem. I have windows xp media center edition and I cant' install windows vista. When I turn on my computer with vista DVD inserted, it starts very well. When he arrives at the end of the section "Windows loading files", I get an error saying winload.exe is missing or damaged. OMG! what I'm doing. Help, please!

  PS: I meet well above the requirements for vista.

  original title: PROBLEM of INSTALLATION of VISTA! WINLOAD. EXE, MISSING OR DAMAGED

  Hi xXCAS93Xx,

  Thank you for using Microsoft Vista answers Forums.

  ATTENTION: make sure that u save your file before the following steps.

  Here are a few rare to get this problem is resolved.

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency and a keyboard or another input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click Startup Repair.

  7 restart the computer.

  For a complete statement on another option on how to resolve this problem, see this link

  http://support.Microsoft.com/default.aspx/KB/927391

  Please let us know if there is need help or if this solves your problem.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• How can I restore previous e-mails after re-installation of Windows Vista and using Windows Mail?

  How can I get previous emails after reinstalling windows, use windows mail. I have windows vista. I used the mail for windows for years. my computer just crashed and I had to install new to include windows-based messages. now, I've lost all the previous insalliation e-mail. can I get it back?

  original title: previous emails

  If you reinstalled Vista without saving your messages, they are gone, unless you have kept a copy of messages on the server. If it is a POP3 account, you must have done this choice. If it is an IMAP account, messages must be on the server.

• Reinstallation of Windows Vista by using the upgrade media

  I'm trying to fix my friends computer. Each time it starts up, it says Windows could not load the NLS being missing or corrupted data. Reinstall Windows Vista. When I try to reinstall vista using the CD there that said to use use this product key you must start Windows installation while running your existing version of Windows. What does that mean? What should I do? The computer used to have XP and it has upgraded to Vista using this CD.

  If Vista is an upgrade, so it must be installed as an upgrade.  Install the original XP operating system and turn it on.  Then upgrade to Vista and which to activate.  You can't ignore all during the first stage.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista - cannot use the TRENDNet TBW-102UB Bluetooth device

  Hello

  I am facing a problem that occurs when try to connect the device Bluetooth on Satellite A135-S4637 with Windows Vista Home Premium.

  The Bluetooth device is a TrendNet TBW-102UB and in XP it works fine.
  The error message is "peripheral Bluetooth is not ready."
  After new installation updated from the manufacturer's Web site the problem persists.
  Is there a service pack for Vista which fix this kind of problem or it is something relational to the Toshiba Bluetooth software?

  Thank you
  Daniel

  Hello

  Please don't be crazy on me, but I do not understand the relationships for Toshiba laptop. Are you sure that all the USB ports on your laptop running at 100%?

  If Yes, all this has something to do with this external device, driver and settings. To be honest, the manufacturer must provide Vista compatible software. Do you think so?

• Re: Unable to activate Windows Vista Business using the Microsoft key

  I am facing difficulties to activate the microsoft package, whenever I enter the product key printed on the label attached to my pc, it says wrong key.
  Help, please.

  The key to Microsoft, that you can find on the lower side of your laptop is not a kind of universal key and this key belongs to Vista preinstalled on your laptop. You got your laptop with Vista preinstalled. With your laptop, you have paid a license and an operating system.

  After recall of Toshiba you must create Toshiba Recovery DVD or this facilities you can use if often you want with your laptop. This version of Vista belongs to you and can only be used with your laptop.

  If you are using Microsoft facilities DVD you must have the key for this version. If you do not, you must purchase a key online and activate a preinstalled Vista version.

• Help to perform a new installation of Windows Vista 64-bit.

  Original title: Clean Install.

  I am wanting to perform a clean installation of Windows Vista Ultimate 32-bit.  I would like to install Windows Vista Ultimate 64-bit.  I was told, during the custom Setup, that I could choose which bit to install.

  Hello

  With Vista, you do not boot from an external drive to install it.

  It is an option in Windows 7.

  And they told you to contact Microsoft for support.

  Microsoft does not provide support for OEM installations.

  In Vista, 32 bit and 64 bit come on different DVDs.

  See you soon.

• Installation of 8.1 of Windows 8 by using the windows 8.1 image file located on USB

  I want to do the Windows Installation 8.1 do I need key to install the pre-installed Windows 8 windows using the windows 8.1 image file located on USB downloaded from microsoft.

  Hi Lovina,

  We are here to help.

  Installation of Windows 8.1 using the image file is on your key USB can be activated without the product key.

  You can also consider to upgrade your computer to the latest version of Windows, Windows 10. Check out this article for more of Windows features 10

  Please do not hesitate to contact us if you need assistance.

• Try to install Windows Vista. When the system starts, I get a black screen with no message and no prompt.

  before starting up the plant, black screen

  A friend gave me the laptop since they bought a new.  I tried to do a clean install of Windows Vista on a laptop Gateway P6831 FX.  After changing the boot order in the bios settings, the dvd starts to spin.  The only thing that appears on the screen is a screen black/Bank.  I'm never invited with the message 'Press any key to start the installation' to start copying the files for vista.

  The Bios recognizes the hard drive (Sata).  I don't know what to do at this point.  Help, please.

  I fixed it.  I looked at a few other responses in this forum and used the SATA drivers during the installation of Windows XP.  After that, I've upgraded to Vista.

• Remove windows vista without starting the operating system

  Hello! IAM using windows vista. Lately, I just figured that the computer has the virus iam so think upgrade to windows7 and I want to remove vista first. Is it possible to remove vista without starting? Sombody help please! Thank you!

  Hello

  1. you must have an operating system to be upgraded; in your case vista

  You cannot delete vista

  2. an upgrade is performed from an operating system of windows in your vista case, unless microsoft advises otherwise; does not apply in your case

  solve your problem of malware or clean reinstall vista 1st - then upgrade

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ____________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  ___________________________________________________

  information about windows 7

  It depends on if the manufacturer of your computer/laptop has windows 7 drivers available for him as to if it will work properly

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• My windows vista computer has the look of windows 2000?

  Hello.

  I have problems with my windows programs.
  I fell asleep last night in front of my computer, and when I woke up, I found that most of my windows programs like version of windows 2000
  Microsoft word, excel and paint that old look and my scroll bar also resembles those of windows 2000
  He also accused many or refuses to answer when I want to attach files in an email, or open a word document.
  Could someone please tell me how to solve this problem, because I don't know what to do...
  Thanks for the help!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.