trying to get over the original Vista on my pc

Similar Questions

• Fonts of computer how to get back the original font?

  Hi I just installed this game yesterday called special forces.

  When I switched on my computer: today, the fonts from my computer changed everything for the font set.

  still, the resolution is 1024 x 768, I wouldn't change a thing. How to get back the original font?

  Help!

  Hello, LynA1103,

  Did you change Windows themes when you installed the game?

  Have you tried a system restore to a date and time before installing the game?

  What is the system restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Right-click on desktop and select Customize

  Select the appearance and color of the window

  Click on the properties of classical appearance open for more color options

  Select the theme under the color scheme

  Click Advanced settings

  Click on the title bar Active

  Select font of choice

  Select the color of the font of choice

  Click Ok, apply, Ok

• How to get back the original format of e-mail? Is there a choice? I feel that outlook has too many restrictions!

  How to get back the original hotmail format? Is there a choice? I feel that outlook has too many restrictions. For example, I have to send an e-mail during the... For some reason, Outlook does not allow me to.

  Unfortunately, if you were auto update, there is no option to return back.  Microsoft upgrades everyone to Outlook.com in the coming weeks
  
  http://Windows.Microsoft.com/en-us/Windows/Outlook/auto-upgrade-Outlook-FAQ

  If you have specific questions, we would be happy to help but Outlook.com is here to stay.
  

• Im trying to get off the load free anti virus, but it does not work

  Im trying to get off the load free anti virus, but it does not work

  Im trying to get off the load free anti virus, but it does not work

  Not enough information.

  Of course - you send messages to a Microsoft support forum and one could assume that you mean that you try to download Microsoft Security Essentials, save it to your computer and install it then - but even with this hypothesis - another that knowing you have Windows XP (probably Home edition, but possibly professional or Media Center editions - and probably more than 32-bit not 64 - bit)-we do not like you think we should knowledge.

  Regarding AntiVirus - free are very good: Avira, AVG, Avast

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just AntiVirus.)

  Get one - save on your computer (do not install immediately.)

  Reset...

  After a reboot - install your new product and update after the installation.

  Run a full scan with it.

  Then - just to make sure you started on the right foot...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

• I was playing with a photo and click on save by accident. How can I get back the original?

  I was playing with a photo and click on save by accident. How can I get back the original?

  Sorry, you can't... unless you have a backup from before you made the changes.

• error messages: rundll.exe and system32 files are missing or 'something' I have tried to put in the original for my Windows XP Professional disk and could not do. Someone walk me through what to do with it?

  Error message when I try to "Set up the home network" or some other things I try to do. It is the system32 file rundll.exe or that my computer can not find.

  How are you trying to set up the network? Exactly what you do when you get the error? And please quote the error message exactly.
  What is your configuraiton of network (router, points of access, switches, direct cables, etc.)?
  What operating systems are the computers that are running? MS - MVP - Elephant Boy computers - don't panic!

• Error message 106 trying to get on the wireless network.

  I have the new Sony Vaio laptop with Win7.  He networked well with my parents in the United Kingdom.  Now trying to get network at home in France, I'm getting an ERROR 106.

  My Network works fine with my old laptop with XP.
  Help please because I want to play with my new toy!

  Hello

  1. What is the exact error message with the error code?
  2. What happens when you try to connect to internet using wired connection?

  Method 1:

  I suggest to run the network troubleshooter, and check to see if that fixes the problem. See the following article to do the same thing:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
   
  Method 2:

  I suggest you to read the following article and check if it works:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• I need to cancel the order that I did yesterday (11054908559) but it doesn't there is no Cancel option on the Brazilian from ADOBE site, if someone had the same problem I had, please help me, I tried to get on the phone, but no one answered the phone ca

  I need to cancel the order that I did yesterday (11054908559) but it doesn't there is no undo option on the Brazilian Adobe site, if someone had the same problem I had, please don't help me, I tried to get them on the phone, but no one answered phone calls, I m very angry, when we want to buy it is easy When we need to cancel it s very badly and information not clearly. Sorry to bother you with this topic.

  Cancel your membership creative cloud

• HPE-210y; trying to get into the advanced settings of the bios to change the setting of the fan

  Hello

  Model # HPE - 210Y

  Product # BK170AA-ABA

  BUILD with ID AINAv6PRA6

  CARD MOTHER-HRS880-ΜATX

  BIOS VERSION 5.09 22/01/10

  BASIC 08.00.15 VERSION

  I have a small problem when I start my computer it gives me an error: System fan has failed. Press F2

  Well my system fan works very well done any tests on old tried on slow corners fan connector

  another connector revved at full speed. I reset CMOS changes that the battery took all the memory, video card

  and everything cleaned with air. the usual steps.

  I asked around and technicians say the problem could be in the bios settings of fan cpu (quiet mode). Everyone says

  Press f1 or f10 to get into the bios Setup. go to the Advanced tab and scroll down. but for the life of me I can't find it. I know my computer if it is safe, but it's a pain to have to press f2, whenever the computer must restart

  If anyone can help pleaseeeeee

  Thank you

  Hello

  lonee37 wrote:

  Hello

  first of all thanks for the suggestion about the Nice program trying to core temp

  I replaced the temp of problem system always the same fan has not gone above 73 F

  so I guess I'll have to talk to HP to get it solved

  

  Thank you once again for youy help

  Thaose temperatures very well. Does not even begin to worry until you start to see time @140 degrees F.

  That's well below Tj Max.

  I used to use centigrade. If the temperature is close to that you certainly can't expect much better than this.

  Best regards
  ERICO

• How to duplicate the artboard and move it over the original?

  Basically, I have a document open and want to duplicate its work plan and then move it to a new location (the X axis, the original 50pixels). Doesn't seem too hard, but I can't understand it. This is for CS5.

  var app.activeDocument = docRef;

  var abSrc = docRef.artboards [0];

  var abSrcX = abSrc.artboardRect [0];

  var abSrcY = abSrc.artboardRect [1];

  var abSrcW = abSrc.artboardRect [2];

  var abSrcH = abSrc.artboardRect [3];

  abSrcX = abSrcX + 1221;

  var abSrcRect = [abSrcY, abSrcW, abSrcX, abSrcH];

  dupAB var = docRef.artboards.add (abSrcRect);

  The above works a bit. Original work plan is 17 "x 11" (1224px x 792px) and when I put abSrcX to the foregoing 1221, extendscript throws an error PARM. During one of my sessions of trials and errors, I decided to see what was the document geometricBounds:

  $.writeln (docRef.geometricBounds); = 45-12, 1221.154296875,-780

  So now, I see a bit where I can't go more than 1221, but why can't I?

  I moved the artboard for everything at the top left of the document and I got the geometricBounds again and they were - 6754.5,7038.5,-6463.5, 6736.5, but still can not abSrcX anything about 1221.

  the error is "error Illustrator: 1246458189 ("PARM").

  I tried to understand this is what courses I can think, but nothings working. Any input or help would be GREATLY appreciated!

  EDIT:

  So I tried this for the hell of it:

  var abSrcX = 0;

  var abSrcY = 1224;

  var abSrcW = 1224;

  var abSrcH = 792; (for some reason any 792 translates into 6 "inside the Illustrator, so I put this 432 to make 11")

  var abSrcRect = [abSrcY, abSrcW, abSrcX, abSrcH];

  dupAB var = docRef.artboards.add (abSrcRect);

  and it adds a new work plan and move to X, Y, such that designated. Not exactly what I want, but narrowing down the issue.

  I'm trying

  var abSrcX = 1224;

  var abSrcY = 0;

  var abSrcW = 1224;

  var abSrcH = 792;

  var abSrcRect = [abSrcY, abSrcW, abSrcX, abSrcH];

  dupAB var = docRef.artboards.add (abSrcRect);

  and he throws that error PARM still once, then now there is really no sense!

  Edit2: I changed abSrcY to 10000 and now the height of the artboard is really long, which is insane even more... I don't have the (x, y, width, height) artboardRect down wrong?

  Edit3: If after one more google search, I found out what the problem is. artboardRect is HIGH, LOW, LEFT, RIGHT; and when I do:

  var abSrcX = 1368;

  var abSrcY = 0;

  var abSrcW = 2592;

  var abSrcH = - 792;

  var abSrcRect = [abSrcY, abSrcW, abSrcX, abSrcH];

  top down right and left;

  dupAB var = docRef.artboards.add (abSrcRect);

  This works. BUT I have no idea what the numbers are in relationship with. The center of the artboard? The document Centre? And if I run it again and change... oh dear.

  I think that I just thought of it.

  abSrcX is on the LEFT;

  abSrcY is HIGH;

  abSrcW is RIGHT;

  abSrcH is DOWN;

  Considering that if I add (1224 + 144) to abSrcX and abSrxW, it creates another work plan 2 "away from the previous 17" x 11 ". If I want to run again, I just have to add (1224 + 144) abSrcX and abSrxW again. Now to find a way to do it dynamically on the fly.

  I still like to hear comments on the question of whether this is good or bad, and how I can improve!

  @clrx01,.

  Why do you work with width and height work plan?

  IMHO you need what only once.

  Try something like this:

  // ArtboardCopy.jsx
  // http://forums.adobe.com/thread/1320239?tstart=0
  //        How to duplicate artboard and move it relative to original?
  // regards pixxxelschubser
  
  var docRef = app.activeDocument;
  //var abSrc = docRef.artboards[0];
  var abIdx = docRef.artboards.getActiveArtboardIndex ();
  var abSrc = docRef.artboards[abIdx];
  
  var moveX = 50;
  
  var abSrc_L = abSrc.artboardRect[0];
  var abSrc_T = abSrc.artboardRect[1];
  var abSrc_R = abSrc.artboardRect[2];
  var abSrc_B = abSrc.artboardRect[3];
  
  var next_ab_L = abSrc_R + moveX;
  var next_ab_T = abSrc_T;
  var next_ab_R = next_ab_L + (abSrc_R - abSrc_L) ;
  var next_ab_B = abSrc_B;
  
  //top left right bottom;
  
  var next_ab = docRef.artboards.add([next_ab_L, next_ab_T, next_ab_R, next_ab_B]);
  

  Have fun

• Trying to get on the internet impossible due to a message from security 2011 Windows XP Home

  well on my desktop computer I can't get on the internet. It says I can't because my firewall are down and I can't get on woth on paying lik $ 78 for a windows xp security 2011 HELP

  Hi JrGomesz5307,

  Your system is infected with the virus, you will need to update your antivirus and run a full scan of the system in safe mode, until you see that your system has no infection found.  You can also download a-squared malware-bytes: http://malwarebytes.org/ and run a scan.

  I hope this helps.

• Error: Initiator has tried to get around the security phase, but we cannot

  Hello

  I started working on the new company and tonight we lost storage for about an hour and mistakes came:

  SAN1 storage array error event
  subsystem: MgmtExec
  event: 7.4.3
  time: Sun Apr 21 00:58:18 2013
  "connection iSCSI to target '10.10.10.21:3260, iqn.2001-05.com.equallogic:4-52aed6-cb0bdf198-eee0000000c50212-vss-control' initiator ' 10.10.10.22:53396, iqn.1991 - 05.com.microsoft:sp2 - vm - sql2.company.local' failed for the following reason:
  Initiator has tried to circumvent the security phase, but we cannot.

  On windows this evening first errors began:

  EventID: 4025
  Source: EqualLogic
  connection error iSCSI 0xefff0009 connecting to the vss-control for the 10.10.10.41 group volume

  Event ID: 10
  Source: iScsiPrt
  Logon request failed. The login response packet is given in the dump data.

  These errors I see repetition of the past in the Windows event log.

  It is hyper-v virtual SQL cluster with iSCI Dell storage connection.

  How to solve this problem?

  Thank you

  Hello

  Vss control volume, which is used my MS Volume Shadow service to access the clichés of material, there's a GUY configured username. However, the initiator does not send a name of user and password c...

  If you use the EQL TYPING kit, then you should allow these servers access to this volume.  Or change the ACL on this volume to allow that the servers that need to access.

  Alternatively, you can remove it from the Favorites tab, so that he tries to log in the next time the server starts.

  Finally, you can enable the discovery of prevnet filter this of is re - produce.

  Here is a KB from the Equallogic Web site.

  Solution title error: "initiator wanted to ignore the security phase but we can not." or "initiator has tried to circumvent the security phase but we cannot."

  Symptom of solution of details: event on the web interface of PS log table shows a connection error for a volume that says: "initiator wanted to ignore the security phase but we cannot." This error can be repeated continuously every few seconds.

  Question: by default, volumes that have enabled CHAP authentication will be shown during the process of iSCSI discovery even if the initiator does not have the authentication information c. Discovery is controlled by its address IP ACL, so if a machine matches the IP address of the ACL scope, we will see the volume. Note that multiple initiators such as those that are unix based as the initiator of the Cisco software that uses VMWare will continue to attempt to connect to the target (often, every two seconds), even if each connection attempt fails. This can fill the paper and the performance of the server can have an impact.

  Solution: Limit the discovery of volumes CHAP authenticated by IP address and ensure that only servers with appropriate credentials CHAP can observe the volume at all.

  The most common volume to see this error on is the special volume named "vss control." This volume is for communication with Microsoft's VSS service, using EqualLogic host integration tools. If it is configured for unlimited access, or is configured for the CHAP only, then each initiator on the SAN will be able to find out and may attempt to use it. Set ACL "vss-admin" to enter an IP address for each machine that needs to access, to ensure that no one else does.

  For firmware version 2.2.3 and, before going to the volume named 'vss-control', select the Access tab and change the entries here in a proper way.

  For the later version 2.3.2 (including all versions 3.X) firmware, go to the Configuration Group box and select the VSS/VDS. It's the ACL for the vss-control volume, which you should change as appropriate.

  It may be necessary to restart servers that try to access this volume after changing the ACLs, however. Some initiators do not release a target once they have discovered, even though the table indicates that the target does not exist. An example of this are ESX servers, using the software initiator.

  A second scenario may be a volume that is configured to be seen from in a VMWare server VM Windows using CHAP credentials and also install on the table to use a single connection Cap. Even if the credentials CHAP is setup correctly on each side if the ESX Server uses the software initiator that ESX will attempt to connect to the volume permanently every minutes or seconds depending on factors both. With configuration to several volumes in this way, it can be a drain on performance on ESX.

  To troubleshoot this scenario make sure to activate the iSCSI discovery of the IUG table of PS filter. This is done from the Group/iSCSI Configuration tab. check the box off and save the configuration using the Green disk icon in the upper right of the graphical interface. This makes the servers with the initiators that are correctly setup to see a volume with CHAP will see and try to connect to these volumes. Note: once an ESX Server has seen a volume to continue to try to connect with the software initiator until the ESX Server is restarted after this option is turned on.

  Note that, since the version of the firmware 3.0.5 and later, you can require authentication for CHAP-enabled volumes during discovery, by issuing the command in the CLI:

  GroupName > enable discovery-use-chap grpparams

  Kind regards

• Why won't my Microsoft keyboard work during the start sequence () trying to get into the BIOS)?

  When you start up/reboot my system, my Microsoft Natural Wireless ergonomic Kayboard 7000 does not work to thus preventing me the ability to get into the BIOS to make the necessary changes. Can do something about it? Before ask you, Yes, legacy USB support is enabled.

  This problem is usually a problem with the BIOS Setup.  Several BIOS can have different settings to enable / disable the USB keyboard / mouse access.  These tend to be listed as:

  Use USB legacy...

  Activate USB keyboard...

  It is a major problem with motherboards that have the old PS/2 ports for keyboard / mouse.

  Also, I found that if your keyboard is not directly connected to a rear USB port, you may have this problem.

  And according to the number of devices USB is connected to your PC, if you 'maxed out' device (all ports used), your keyboard is not working as it should during the windows "pre-seed" process (including the BIOS screens "P.O.S.T.".)

• DNS server error that always brings back us to windows update erros trying to get on the internet

  Vista - hate him. I spent hours on the phone with a brand new computer that Toshiba with Vista 64-bit Edition Internet will stop working with the DNS server unknownerror. Sometimes reboot help but with all Windows update he internet is a luxury. Internet connection is perfect, perfect bc other laptops in the House with no problem, router, no viruses etc., computer - fine tooth - comb nothing.

  Take each OFF download windows update and work until updates again and then started barking at me, something is missing like its updates! Can't very well what update is screwing the connection or networking or a framework-Silverlight is always suspcious to me also.

  My icon for internet splits in two and shows as a #2 without asking confirmation except for a mysterious update. Access: Local and Internet. Symbol of the Internet will be turned off and will not ever look like disconnected until you try to connect.

  That's why people are going to Apple. Windows will not help or is somewhere secret and accept just your visa and mastercard and so what still you? Vista I can't update and no security.

  Toshiba is not very user-friendly, that is toward the back, they discovered Windows was the question. Isn't our problem, said - even if we're stuck with Vista with their product!

  I'd love to hear if someone has SIMILAR problems or if anything that I did not have tried! Thank you very much.

  Signed. Never buy new windows - toshiba on my list too.

  Hi begodsbutterfly,

  Welcome to the forum of answers windows vista.

  We are sorry for the inconvenience that you had to go through. I have some steps you can try to solve this problem.

  Try to check in SafeMode with Networking if the same problem occurs. To start in safe mode with network, restart your computer and press the F8 key for about four to five times. You will see the window options of safe mode with network in rated advanced. Use the arrows on your keyboard to select Safe mode, and then press ENTER.

  Please check if you get the error in safe mode with network.

  You can also try a system restore to the date when the computer was working fine.

  To do a system restore, please follow the steps below:

  1. click on start to reduce this includes this image, type systempropertiesprotection in the Search box and press ENTER.

  Reduce this includes this imaIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  2. in the System Properties dialog box, on the System Protection tab, click System Restore.

  3. in the System Restore dialog box, select choose a different restore point, and then click Next

  4. Select the restore point that you want to use, and then click Next.

  5 confirm your restore point and then click Finish System Restore restores the selected Windows Vista configuration and then restarts the computer.

  6 log in the computer. When the restoration of the system of confirmation page appears, click on OK.

  The system restore article is:

  http://support.Microsoft.com/kb/322756

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• abandoned operation continues to come in trying to get on the sites?

  If im trying to connect to my email address for example or any other operation of site abandoned starts, I click on it, then press refresh and sometimes it goes away sometimes it does'nt.

  Hello

  1. What browser do you work?
  2. What is the version of Internet Explorer installed on your computer?
  3. Remember to make changes to the computer before the question?

  If you use Internet Explorer to access the internet, then you can try the following methods

  Method 1:

  Use Internet Explorer in no add-on mode and check the status.

  (a) click Start.

  (b) click on all programs.

  (c) click on accessories.

  (d) click on system tools.

  (e) click Internet Explorer (No Add-ons).

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  (a) click on tools and then click Internet Options.

  (b) click on the tab programs and then click on Manage Add-ons.

  (c) click an add-on in the name list, and then click on disable.

  (d) repeat step c until you identify the add-on that is causing the problem.

  If this solves the problem, this could be caused by an adware installed as add-on.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Internet-Explorer-add-ons-frequently-asked-questions

  Method 2:

  Why do I get an "Operation aborted" error message when I visit a Web page in Internet Explorer?

  http://support.Microsoft.com/kb/927917