trying to get rid of a single color; would love advice
Hello
I have a few partitions (black, horizontal bars, musical notes, treble keys, etc. - sorry, I'm not a musician so I can't be describing things exactly) I want to include in an InDesign book. I imported these bars and notes in Photoshop and followed a video tutorial - I have tried to get rid of all the white, then I can pose this music on a background of my choice. It worked "kind of", but it seems there are other shades of white, between the horizontal bars and around the notes themselves, so all of that/those other shades of white remained.
So... given that trying to get rid of white did not work, I have to approach it differently? Perhaps, if black is all black even, I could get Photoshop save just black?
If it's a better approach, is a person mind give me a tip or two on how to best proceed?
Thank you very much
Malcolm
Place your pattern of music on a layer on your chosen background.
Then change the blending mode of the layer from Normal to multiply and the white background of the layer will disappear.
Another option, according to the shades of gray in the layer, is to double-click on the layer in the layers panel to bring up the Styles of music.
Then in the lower segment as seen here, slowly move the marker on the left
Tags: Photoshop
Similar Questions
-
Is no longer, I can locate downloaded files. They are still recoverable?
The files are still there on the hard disk where you saved the.
You have only deleted the download history, then you will not be able to access it through "Open containing folder" from the context menu.
-
How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.
How to work with this pinhole?
Usually a paperclip or toothpick or ball pen.
Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.
How to reset AirPort Extreme 10.11.6 OS?
The software method... Unlike the above material method... is to open airport utility and select restore default settings.
Both methods take you to the same place.
You can also read the manual...
-
I tried to get rid of the annoying pop up on You Tube and in frustration, I chose the refusal full screen and "remember" and now cannot get full screen anywhere or change it back. How do I do that? I read the thread here with the same problem and the solution included hit ' command + I "and so on. How do I do that? What is 'Order' and the letter 'i' or 'L' or the number "!"?
You can control and manage permissions for the domain in the tab currently selected through these steps:
- Click the address bar onthe Site identity button"(globe/lock)
- Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
- Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab
-
XP, 32, quad, walk, I've just been diverted while trying to get rid of unwanted guests, I came back to the control panel & it management logo had changed it was changed to a page, if that's how describe you you can see I need to learn a little more about computers right! anyway & when you right click it there came a page white, but before, I was trying to get rid of those comments, there were about 5 I know where they come from bittorrent, I had to install more than one week & then I am devoured alive I had to get my tech to reformat, but these things were hidden somewhere? because I found traces of bittorrent on the computer, I give up! Please can someone! help this old man! gazza.
Hi gazza.
Scan your computer for malware and try to remove it.
You can use the Microsoft Safety Scanner to do the same.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Unfortunately, when a system is infected the best way to ensure that everything has been deleted is to perform a clean installation.
-
I'm trying to get my printer to make color
I'm trying to get my printer to make color, it does not seem to matter what I cannot have to print in color. I had problems with the printer and may have changed the settings and I have no idea how to solve this problem. I went to the printer settings and went to the properties of the printer to color management, then I get lost. When I put my printer in (and I don't see why it's different) nothing changes. nothing I try makes no difference.
Hello
If you have changed the settings of the printer, on the whole, we can suggest is to uninstall, and then reinstall the printer that would about how it has been initially set up.
People who can help you with the settings of the printer are the manufacturer of the printer, not Microsoft.
Contact the manufacturer of the printer for assistance or try the Support Forums.
See you soon.
-
The Task Manager - I'm trying to get rid of the programs and files unnecessary
I have more than 140 lines of running abuse. I'm trying to get rid of the programs and unnecessary files.
When I am online the cpu is also the diagrams, and it doesn't take long before his stop at all
Terry c
Hello
Use the clean boot method and Process Explorer to determine what are these services and, if applicable
ask questions. Of course, check out the other methods as well to help improve the system
performance.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How can I get rid of the background color in shortdesc
Whenever I have delete the background color of the short.description paragraph tag, it comes at the time when I reopen FrameMaker. I don't want the background colors in my short descriptions.
Hello
As Scott pointed out, you make changes in the model if you want to remove the background color in shortdesc. If you create a topic / / concept/glossentry/reference tasks, etc., the models are found here:
C:\Program Files\Adobe\AdobeFrameMaker10\structure\xml\DITA_1.2\app\technicalContent\template (in Windows XP)
Note: Please take a backup of your original models, just in case where something goes wrong here.
(1) assuming you create a theme, open topic.template.fm.
(2) paragraph open designer. Format > paragraphs > Designer...
(3) ' short.description' select the tag in the menu drop-down.
(4) Goto the tab "Default font" in the paragraph Designer.
(5) at the bottom of this dialog box, check "Background color".
(6) click on the "Update All" button
(7) save the document template.
This should help you to get 'RID' of the background color in shortdesc.
Kind regards
Saurabh
Team Adobe FrameMaker
-
Help pls trying to get rid of UKASH
Seem to have the ukash and can't get rid of it, have the security of microsoft and have downloaded additional Microsoft safty scanner1.0.3001.0 and ran full scan in safe mode, no virus found... BUT on reboot it still on the system. When try portable scanner stops after 50 minutes and must try again. Malwarebites tried without success. HELP suggestions.
Hello
1. have you installed any program under the name of UKASH on your computer?
2. do you get any error in connection with UKASH? If so, what is the full message?
3. have you done any software or hardware changes on your computer before this problem?To work on this issue, see the following method.
You will need to download Windows Defender Beta offline to a flash drive, CD, DVD, or USB, and then perform the operations. The program must be run from the desktop.http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Check if it helps. -
Trying to get rid of the 'HornyGirlsHere '...
When you try to follow the advice of the blog, get rid of the "HornyGirlsHere" of my e-mail contacts list, you said to go to 'guest' and then click on no.... I see nothing that says "invite." Please indicate where I should look? Thank you for your help.
Hello
If you use Hotmail:
I'm sorry, but we cannot help with hotmail problems in these forums in response to vista
Please repost your question in hotmail in the hotmail link below forums
http://windowslivehelp.com/product.aspx?ProductID=1
ForumsConsult with Microsoft Certified Solutions____________________________________________For the different Forums for Windows Live Applications, select the link belowWelcome to Windows Live Solution Center -
I got a toolbar at the top of the Firefox page which had a single thing about it and I wanted to close or delete this toolbar, and I have deleted or closed that bad. Now, one with file, editing, tools, etc. is missing and I don't know how to get it back. Can you help me?
- Try Alt (press keyboard) and then in turn, V, T, M
- See also the Navigation buttons such as back, home, bookmarks and recharge are missing
- and controls, buttons and Toolbars Customize Firefox
Pressing Alt poster temporarily the menu bar, the other keys select the option set menu toolbar to display bar.
It should still work in Firefox 4, which has a firefox button, Alt temporarily displays the menu and the firefox button bar.
According to what has happened, you will need to use customize/customize to make other changes or even restore default, perhaps even to start Firefox in Safe Mode troubleshooting questions or study if another plugin affecting behavior of firefox.
-
Hello
First time on this type of forum so I hope that what I write is logical. So, here. I have improved my coming 8 Pro for Windows 10 and after the update it told me that I needed to make space on the disk. I looked and there is not a lot of programs that I have removed looked beyond and found that there are 2 partitions that had almost 6 shows assigned to them which were not used. I tried to reclaim that space. I made a copy of recovery on the micro SD and that seems to work very well. Then I fiddled around until I could remove the 5 + GB partition and reassign it to the primary partition. The second partition (about 750 MB) I was able to free up, but as it was before the main partition, I wasn't able to retrieve space in the primary partition. I downloaded a utility recommended to try to move at the end of the main partition so that I could get it back like this. Everything seemed to work but it stopped crashing and I got a blue screen of Windows saying that "the application or the operating system could not be loaded..." ». I figured out how to get into the bios to see if I could change the boot sequence, I created a windows 10 bootable USB and after a lot of work finally got the tablet to boot from USB. At this point, Windows 10 wanted to re - install (which I'm fine with) but the only problem is that the touch screen unresponsive! I assume that the driver is not loaded on a USB boot.
Now I am trampled. I don't really know how to go further. Is there a way to get the drivers to load from the USB? Can I send my tablet in a magical place where qualified technicians will be re - build it for me?
Any assistance or moral support would be greatly appreciated.
Thank you
Richard
Would you go through the process, and when you need to use the touchscreen, join via the microUSB port and an adapter USB OTG, a wired keyboard (and mouse wired, if necessary, via a multiUSB adapter attached to the adapter USB OTG) and then complete the installation of this way? At this point, you can download the required drivers from the Web page of the Dell product support and win your touch screen feature back.
-
How can I get rid of the background color when you use the list box?
And, I lost my toolbar at the top of my screen in Acrobat and cannot find a way to get it back! Help!
F8 to toggle the toolbar and you can not change the highlight color of a list box.
-
I tried setting the CSS link colors to match my origins, and this has solved the problem in Safari and Firefox, but not IE. It looks like a mess, thanks to the fact that the nav buttons are non-disposes gif with transparency on.
Any suggestions?No URL yet - but I thought about it. Just had to set the image to the border = '0 '. Thank you.
-
He just jumped to the top of agaain
Hello
1. when exactly you get this message?
2. do you have brand and recent changes?
I suggest you try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
It will be useful.
Maybe you are looking for
-
When I go to netflix, my that I do not see the 'delete '' x' "that the page is too wide. I can go to internet explore and delete movies in my Quebec with x, he provided. I can't reduce my firefox page to the low enough to see the 'x '. How narrow the
-
Compaq presario cq57: compaq presario
My compaq presario cq57 said system disabled 62359871.plz help. Thank you
-
What type 3D format file can be used by LV
I'll try to make a 3D model and post it in labview, then make sure it can turn and score. May I know what kind 3-d format file can be used by LV, thanks.
-
Impulses per kilometre high-speed conversion/measure
We are currently working on a system of data acquisition for an electric boat. We have a GPS speed sender who transmits the speed of the boat regarding the impulses per kilometre. We can get LabView to detect the input pulses, but have no idea wher
-
We have a DJ5000ps plotter with an xp driver. Just bought a new computer with Windows 7. This Tracker is no longer supported. Is it possible to have a driver for win 7? Can I combine the .inf for xp file in Windows 7? Anyone interested in writing a p