Help pls trying to get rid of UKASH
Seem to have the ukash and can't get rid of it, have the security of microsoft and have downloaded additional Microsoft safty scanner1.0.3001.0 and ran full scan in safe mode, no virus found... BUT on reboot it still on the system. When try portable scanner stops after 50 minutes and must try again. Malwarebites tried without success. HELP suggestions.
Hello
1. have you installed any program under the name of UKASH on your computer?
2. do you get any error in connection with UKASH? If so, what is the full message?
3. have you done any software or hardware changes on your computer before this problem?
You will need to download Windows Defender Beta offline to a flash drive, CD, DVD, or USB, and then perform the operations. The program must be run from the desktop.
http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Tags: Windows
Similar Questions
-
XP, 32, quad, walk, I've just been diverted while trying to get rid of unwanted guests, I came back to the control panel & it management logo had changed it was changed to a page, if that's how describe you you can see I need to learn a little more about computers right! anyway & when you right click it there came a page white, but before, I was trying to get rid of those comments, there were about 5 I know where they come from bittorrent, I had to install more than one week & then I am devoured alive I had to get my tech to reformat, but these things were hidden somewhere? because I found traces of bittorrent on the computer, I give up! Please can someone! help this old man! gazza.
Hi gazza.
Scan your computer for malware and try to remove it.
You can use the Microsoft Safety Scanner to do the same.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Unfortunately, when a system is infected the best way to ensure that everything has been deleted is to perform a clean installation.
-
The Task Manager - I'm trying to get rid of the programs and files unnecessary
I have more than 140 lines of running abuse. I'm trying to get rid of the programs and unnecessary files.
When I am online the cpu is also the diagrams, and it doesn't take long before his stop at all
Terry c
Hello
Use the clean boot method and Process Explorer to determine what are these services and, if applicable
ask questions. Of course, check out the other methods as well to help improve the system
performance.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.
How to work with this pinhole?
Usually a paperclip or toothpick or ball pen.
Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.
How to reset AirPort Extreme 10.11.6 OS?
The software method... Unlike the above material method... is to open airport utility and select restore default settings.
Both methods take you to the same place.
You can also read the manual...
-
I tried to get rid of the annoying pop up on You Tube and in frustration, I chose the refusal full screen and "remember" and now cannot get full screen anywhere or change it back. How do I do that? I read the thread here with the same problem and the solution included hit ' command + I "and so on. How do I do that? What is 'Order' and the letter 'i' or 'L' or the number "!"?
You can control and manage permissions for the domain in the tab currently selected through these steps:
- Click the address bar onthe Site identity button"(globe/lock)
- Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
- Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab
-
trying to get rid of a single color; would love advice
Hello
I have a few partitions (black, horizontal bars, musical notes, treble keys, etc. - sorry, I'm not a musician so I can't be describing things exactly) I want to include in an InDesign book. I imported these bars and notes in Photoshop and followed a video tutorial - I have tried to get rid of all the white, then I can pose this music on a background of my choice. It worked "kind of", but it seems there are other shades of white, between the horizontal bars and around the notes themselves, so all of that/those other shades of white remained.
So... given that trying to get rid of white did not work, I have to approach it differently? Perhaps, if black is all black even, I could get Photoshop save just black?
If it's a better approach, is a person mind give me a tip or two on how to best proceed?
Thank you very much
Malcolm
Place your pattern of music on a layer on your chosen background.
Then change the blending mode of the layer from Normal to multiply and the white background of the layer will disappear.
Another option, according to the shades of gray in the layer, is to double-click on the layer in the layers panel to bring up the Styles of music.
Then in the lower segment as seen here, slowly move the marker on the left
-
Trying to get rid of the 'HornyGirlsHere '...
When you try to follow the advice of the blog, get rid of the "HornyGirlsHere" of my e-mail contacts list, you said to go to 'guest' and then click on no.... I see nothing that says "invite." Please indicate where I should look? Thank you for your help.
Hello
If you use Hotmail:
I'm sorry, but we cannot help with hotmail problems in these forums in response to vista
Please repost your question in hotmail in the hotmail link below forums
http://windowslivehelp.com/product.aspx?ProductID=1
ForumsConsult with Microsoft Certified Solutions____________________________________________For the different Forums for Windows Live Applications, select the link belowWelcome to Windows Live Solution Center -
It has been like that for a few weeks... Help, please!
It is possible that there is a problem with the files that store the registry extensions.
Delete the files (extensions.sqlite, extensions.ini, extensions.cache) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.
New files will be created if necessary.
See "extension corrupted files:
- http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
- https://support.Mozilla.org/KB/unable+to+install+add-ons
If you see disabled extensions, is not compatible, in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to check if there is an available update compatibility.
See also:
-
I used CommandPrompt to try to rid the administrator privileges for that when I'm on another user account he don't ask me the password, or install all the files that I had the intention of this account to the administrator account. I used the command net user administrator / active: No.
I'm not quite sure if I completely deleted the account or hidden in some way, but now whenever I try to do anything that requires the administrator password (almost everything) I don't even have an opportunity to choose Yes to enter and only the no option I can't change any settings on the computer at all by using a user account This being via CommandPrompt, Panel etc. I'm at a complete loss as what to do.
(Also, if someone was uncertain, the account Administrator is not visible on the screen to connect.)
I used CommandPrompt to try to rid the administrator privileges
-> Order net user administrator / active: No. will do exactly what it says: it allows to disable the administrator account. That is to throw the main key to the safe. Here's how you can reverse this reckless action:- Set your BIOS so that it uses the DVD drive as its primary boot device.
- Start the computer with your Windows 7 repair CD.
- Press a key when prompted to boot from the DVD.
- Select 'PC Repair' in the menu.
- Select 'Repair' when prompted.
- When you are prompted, select System Restore.
- Set Windows to a point before you demoted the administrator account.
- Plan ahead a little and create, test and document an alternative admin account, even you have a spare emergency House key. This will save you a lot of trouble.
-
I got a toolbar at the top of the Firefox page which had a single thing about it and I wanted to close or delete this toolbar, and I have deleted or closed that bad. Now, one with file, editing, tools, etc. is missing and I don't know how to get it back. Can you help me?
- Try Alt (press keyboard) and then in turn, V, T, M
- See also the Navigation buttons such as back, home, bookmarks and recharge are missing
- and controls, buttons and Toolbars Customize Firefox
Pressing Alt poster temporarily the menu bar, the other keys select the option set menu toolbar to display bar.
It should still work in Firefox 4, which has a firefox button, Alt temporarily displays the menu and the firefox button bar.
According to what has happened, you will need to use customize/customize to make other changes or even restore default, perhaps even to start Firefox in Safe Mode troubleshooting questions or study if another plugin affecting behavior of firefox.
-
He just jumped to the top of agaain
Hello
1. when exactly you get this message?
2. do you have brand and recent changes?
I suggest you try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
It will be useful.
-
Hello
First time on this type of forum so I hope that what I write is logical. So, here. I have improved my coming 8 Pro for Windows 10 and after the update it told me that I needed to make space on the disk. I looked and there is not a lot of programs that I have removed looked beyond and found that there are 2 partitions that had almost 6 shows assigned to them which were not used. I tried to reclaim that space. I made a copy of recovery on the micro SD and that seems to work very well. Then I fiddled around until I could remove the 5 + GB partition and reassign it to the primary partition. The second partition (about 750 MB) I was able to free up, but as it was before the main partition, I wasn't able to retrieve space in the primary partition. I downloaded a utility recommended to try to move at the end of the main partition so that I could get it back like this. Everything seemed to work but it stopped crashing and I got a blue screen of Windows saying that "the application or the operating system could not be loaded..." ». I figured out how to get into the bios to see if I could change the boot sequence, I created a windows 10 bootable USB and after a lot of work finally got the tablet to boot from USB. At this point, Windows 10 wanted to re - install (which I'm fine with) but the only problem is that the touch screen unresponsive! I assume that the driver is not loaded on a USB boot.
Now I am trampled. I don't really know how to go further. Is there a way to get the drivers to load from the USB? Can I send my tablet in a magical place where qualified technicians will be re - build it for me?
Any assistance or moral support would be greatly appreciated.
Thank you
Richard
Would you go through the process, and when you need to use the touchscreen, join via the microUSB port and an adapter USB OTG, a wired keyboard (and mouse wired, if necessary, via a multiUSB adapter attached to the adapter USB OTG) and then complete the installation of this way? At this point, you can download the required drivers from the Web page of the Dell product support and win your touch screen feature back.
-
Help I tried to get paypal to work as a payment...
Hello I tried to use paypal as payment method, I did the Itunes and went to my account and it starts but nothing that I have to wait for paypal to aprove of it?
- PayPal (requires that the account that is linked to a credit card)
Payment methods, you can use in the iTunes Store, App Store and iBooks Store - Apple Support
-
The RESEARCH is boring. Tried to get rid of it, but can not.
MAKING RESEARCH page comes on when I start firefox. I think it started to happen with the upgrade of lats. I am currently at 25.0.1 level.
My default home page is NOT DOING RESEARCH.
I checked under modules-> extensions. He isn't here.
It's in the windows program directory. And I took off from there.
I restarted my PC several times since the above changes.
However, MAKING SEARCH even sometimes when I run firefox.Hi foffan101,
Sorry, you have problems.This isn't because of the update Firefox 25.1, it is towards other software, you or someone else installed on your computer.
This is a small problem and one thing it does, is change the shortcut used by adding the name of the page, we need to correct this after removing the toolbar of thugs.
See
- Remove a toolbar that has supported your Firefox or the homepage search
The addons Manager method is probably better than the Firefox Reset method- Noting also to use the SearchReset https://addons.mozilla.org/firefox/addon/searchreset/ addon
(It runs, then to uninstall). - AND in addition to check and change your shortcuts,
If necessary, using http://www.bleepingcomputer.com/download/shortcut-cleaner/
- Noting also to use the SearchReset https://addons.mozilla.org/firefox/addon/searchreset/ addon
- See also http://malwaretips.com/blogs/dosearches-com-virus/
As you already have unwanted software, it is probably useful to check for any other malware, modern ALL use the tools mentioned in this article.
In future try to take care with all the downloads. I'd say it's worth looking for reviews on the software and the download site. Then, watch carefully and refuse all offers of extra unwanted toolbars or utilities.
Please post back with how you go and if you need help most.
- Remove a toolbar that has supported your Firefox or the homepage search
-
I do not know how will stop the Panel to the screen of the key coming out on the screen of my laptop (office computer)... Please help me with this. Thank you.
You can prevent the Visual keyboard facilitated access to automatically
> starts when you load Windows by disabling "use on-screen Keyboard.
> box on the page "Use the computer without a mouse or keyboard" in the
> Ease of access Center. (Open the Control Panel, click ease of access, click on)
> Ease of access Center, and then click on the computer without a mouse or
(> keyboard.)http://www.Vistax64.com/tutorials/72733-screen-keyboard.html
How do I change the keyboard to the screen on or off in Vista
See you soon. Mick Murphy - Microsoft partner
Maybe you are looking for
-
Extended warranty info poorly indicated in Tempro
I have extended and registered my warranty, but Tempro, I see that old warranty information.What I can do to update the information?
-
Problem with the formats video pro update 2.0.4
Hello I have a problem with FCPX that appeared after I installed that formats video pro update 2.0.4 (very probably related to this update because had no problem before it). Final assembly runs very slowly and when I try to quit smoking I get a messa
-
SimplePass 6.0 doesn't work is not all a süden :(
Hello I have a HP Pailion dv6-6c35dx, and until 2 days ago my SimplePass worked very well. Now, he only would light up on the way Web sites (but I can still drag my finger to log on the computer itself). I just tried to open SimplePass with my DEPART
-
My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?
-
I had to reinstall Windows 7, but now that the operation, the games disappeared. How can I reinstall the games on Windows 7?