Trying to save photos. Get the message that the backup was unsuccessful. Any ideas?
I didn't save my photos previously. Would it be too many for the disc? If so, how can I put them on several disks?
I didn't save my photos previously. Would it be too many for the disc? If so, how can I put them on several disks?
==================================
Using a CD? DVD? DVD double layer?
The following items may be worth a visit:
Windows Media Player 11 for Windows Vista
Burn a CD or DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
Windows Vista - Burn pictures or videos to a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD
Windows Vista
Burn a CD or DVD in Windows Media Center
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center
Windows Vista-
Burn a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD
Burn a CD or DVD in Windows Media Player:
Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
Windows Vista burning disc:
Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions
Windows Vista-
Back up your files with the backup of the files of Vista Wizard:
http://www.TechRepublic.com/article/back-up-your-files-with-vistas-back-up-files-Wizard/6179067
Windows Vista-
File restore wizard to restore files of Vista
http://www.TechRepublic.com/article/restoring-files-with-vistas-restore-files-Wizard/6180819
Tags: Windows
Similar Questions
-
Hi, I can't download photos from the camera, error 1201, any idea what is - this?
A common problem on a MAC, less frequent on Windows based on my reading of the reports here in this forum
You don't have WRITE permission in the folder where Lightroom is trying to copy the photos to (this file is put in the import dialog box in the Destination panel), so change your permissions.
For future reference, the 201 is not the error code and no use for us here, it's the number of photos that are affected by this error. In the future, just give the complete error message.
-
Hello. Anyone know where to find my own predefined brushes created? I've lost all but about 5 of my own creations - but even those I don't think when I look in the backups... any ideas? I am a Mac user. Thank you very much in advance for any suggestions.
General Photoshop discussion !
I use Windows, and we need to make visible hidden files and folders in order to see the App data access path. OSX has a similar feature? If you have spent the hidden files and folders things, remember what I said about the registration of CC2015 the path of the CC2014 file. That one made me as well, but I worked it out by asking Photoshop to load new brushes and checked the place he was looking for.
-
Hi, I have all the software installed on this computer and have even updated before firefox. now, by clicking on the tab "check for updates" I get the above message. Since it is my computer I guess I am the administrator and I had no difficulties to install the software before. What could happen? appreciate any help on this. Thanks, michael
If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.
Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)
- Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
- Trash the present application Firefox to do a clean (re-) install
- Install the new version you downloaded
Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.
-
I rented the movie and proceeded to go to google play to see. It acts like it is loading, but the screen goes black and a message says: "there was a problem playing the video on this browser. Try the movies play & TV Chrome App. Learn how to install Chrome and chromium app here. problem: I tried to download Chrome (which I don't like), but it seems not to take. I even rebooted. Google opens upward in Chrome. I really want to watch this movie! Help!
Try:
-
I ordered Acrobat Pro for Mac of Tech Soup. They sent a serial number, but when trying to install I get a message that the number is not valid? How do I fix this?
Thank you. I had entered the wrong serial number at first, but with successive tests (using the correct code) I kept getting the message invalid.
I had to re-launch the installation from the beginning, and when you are prompted to enter the serial number began the installation process.
-
After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?
Hello
I suggest you to refer to this link and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions
It will be useful.
-
Original title: screen saver does not start because MSVCR100.dll was not found
After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:
ScreenSaver: Photo screensaver.scr - unable to locate component.
This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.
The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.
Help, please. Thank you.
Hello
It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.
But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.
-
When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.
Hello bdoolen, please try to reset firefox and see if that can solve the problem...
-
I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired. How can I fix it?
Original title: network programs network networking Internet Web site Site Web Web Site URL
Hello
You need to support iPad not Microsoft.
iPad - media choices
http://www.Apple.com/support/iPad - Support
http://www.Apple.com/support/iPad/iPad - communities (Forums)
https://discussions.Apple.com/index.jspaI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title: widows installation problem
I have Windows XP Professional running on a desktop older. I cleaned the disk and I would use it only as a 'internet '. It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»
The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product. Windows Installer cannot continue. »
This will take place two or three times at the beginning upward. How can I prevent Windows Setup tries to install something that I do not use or do not seem to have? I deleted any fax program, that I could find on the computer, and nothing seems to work.
Hello
1. have you done any change in software on the computer lately?
2. are you able to install other applications and programs successfully?Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
a. refer to the article below for the procedure safe mode in Windows XP
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222b. you need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
I had to perform a clean install of Win7 Ultimate on Win7Pro, which recorded data may in a window.old directory. When I installed Win 7 Ultimate, it would install with Win 7 Pro installed, so I've had to do a clean install which has formatted the hard drive.
I tried to activate Win 7 Ultimate with the product key, but I get a message that says that the product key is blocked and I cannot activate my installation of Win 7 Ultimate. What are the options?One of the solutions is to re - install the original program, Win 7 Pro and then re install Win 7 Ultimate.It seems like a repeat of the whole process that I just finished.Thank youAlvaFLLicense status: NotificationReason for the notification: 0xC004F009 (grace period expired).
You must activate by phone:How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
-
Cannot be saved in my folder
When I came to my computer, I had no problem recording on any folder of the user. Then, recently, my hard drive was a
malfunction and I lost all my data and I have OS Win7 reloaded. Now I can't save anything to
any folder of the user. I get a message that I don't have permission and admin contact (which is me).
I would like to know how do I configure admin so I can save anything in folders.
This feature for you telling the truth is a real pain. It's a family computer then why is it necessary?
Some help would be appreciated. »
BobWhat you say seems very strange. Let's drill a little further:
- Click on the globe to start, type three letters cmd and press ENTER.
- Type the following commands EXACTLY as they are and press ENTER after each one:
MD C:\Logs
Set Log=C:\Logs\Log.txt
NET user "user %%nom" > Log %
the value > Log %
Copy Journal % c:\Users\Bob 1% > Log % 2 > & 1
cacls c:\Users\Bob > Log %
Notepad % log - Mark, copy and paste the text into your response.
-
I just purchased Adobe Acrobat Pro Student and Teacher Edition CD and tried to install it but I get a message that my sweet! wear is not up to date, I have OSX 10.7.5 and need 10.9 or higher. I tried to update the software, but I get a message that it is up-to-date.
Have you tried to upgrade the operating system? If so, then is there an error message you get when installing? Please share.
You can check: https://helpx.adobe.com/acrobat/system-requirements.html
Error message: it is so far: Adobe Creative Cloud desktop application uninstalled Adobe apps as up-to-date lists
Concerning
Stéphane
-
HELP, trying to install Illustrator but get this message that I need to download "Adobe Support Advisor" when I go on the site, I see that it has been abandoned, what should I do now? got trapped in the labyrinth HELP HELP!
Hi Joseeyk67276640,
'Download Support Advisor' is a generic error, and we need to understand what is causing the problem. Most of the time, its a problem with the download was not successful or downloaded correctly. So, in this case, re-download the software and do not forget to compare the file size of the file downloaded with the file on the server. From the following link, please download the version of Illustrator, you need: other downloads
Allows you to check in this case as well and make sure that the download is complete, if the size of the file is correct, to the install.log file.
Navigate in the log files in one of the following folder:
Mac OS: / Library/Logs/Adobe/Installers /.
C:\Program Files (x 86) \Common Files\Adobe\Installers\
The name of the log file includes the name of the product and installation date, followed of ".". log.gz."the .gz extension indicates a compressed format.
You can use a utility to extract the 7z or gz to unzip.
Once unzipped, the log file is a text file, open the .log using TextEdit (Mac OS) and notebook (OS Win)
Scroll to the bottom of the log. Look in the section - summary - for lines that begin with ERROR or FATAL and signals a failure during the installation process.
Copy and paste this section SUMMARIZED here so that we can check for errors. Alternatively, you can analyze the logs yourself. http://helpx.Adobe.com/Creative-Suite/KB/troubleshoot-install-logs-CS5-CS5.html
Let us know if that helps.
Maybe you are looking for
-
I've recently updated WIndows Vista with Microsoft updates. After the reboot, the fonts on most of the pages in Firefox and my word processing program, (StarOffice not MS Word), light, incomplete, appearance part of the letter low while the rest is d
-
Equium A60 crashed during the update of the Bios
Hello, can someone tell me if this can be repaired. IHAVE an A60 Equium that crashed during the update of the BIOS, now he died nothing lights up.Thanks in advance
-
Satellite A200 - 1 MB-high temperature
* Hi, *. I have Toshiba Satellite A200 and I have never cleaned the dust out of the computer case. CPU temperature sometimes goes very high, even at 85 C. But it usually ranges from 50 to 65 C. Is - this temperature is too high? What are the risks to
-
Question of the method of loading.
I was looking through the accessories for the XOOM and noticed a car with an owner Jack charger. What bothers me. All my other current mobile devices (headset Bluetooth, Droid, and even a GPS which I never use more) all load them via the Micro USB po
-
Don't know password for the new installation of Windows 7 Ultimate on VmWare Fusion
I bought Windows 7 Ultimate 64 bit and installed on my MAC OS X machine in VmWare Fusion of an image file provided by the seller of Windows 7. However, when I start the merger, there is a 'user' set up account, and it asks for a password. Typing in