Trying to update firmware

Similar Questions

• Error of the controller of the cycle of life by trying to update firmware

  To all,

  I try to update the firmware in a T430. I start in life during post cycle controller and several improvements are needed. When I click on apply tries to retrieve the update but then fails with the following error:

  Impossible to install update packages (SUP0531)

  Enter another location of the repository that has the updates...

  How can I solve this?

  John

  I used the ftp.dell repository... It resolve itself... Update the first time that he had failed on all but one. I tried it rerun others but it kept failing. I restart the server and run it again and it worked.

  John

• Satellite Pro A300 PSAG9E - unable to update firmware

  It has come to my attention that my laptop will not install updates of the firmware.
  I tried all updates firmware on the Web from Toshiba site and on-site support for other countries but still no luck.

  My laptop is a series of Satellite Pro A300 PSAG9E and when I try and install a firmware update a box telling me it's not compatible with my system.
  I checked the version proposed by the pdf file and I know that it is the basic version before the update, and I'm sure I have install the correct way of m.
  So I don't know what goes wrong.

  Does anyone else have this problem or knows something that could solve this problem? Because I'm at a total loss.

  Thank you

  Hello

  The European driver Toshiba page provides three firmware updates;

  _UPDATE for drive_ TS-L632
  + Changes have been made in order to correct the following: +.
  + Impossible to burn songs on iTunes to some CD media. iTunes error "the attempt to burn a disc fialied. An unknown error occurred (2131)"is displayed. +

  _UPDATE for drive TS-L632P TO02_
  + This firmware solves some problems in the optical disc drive. +

  _UPDATE for TS-L632H drive TO03_
  + This firmware solves some problems in the optical disc drive. +

  You have a TS-L632P and TS-L632H drive?
  Isn't it? Then you cannot update the firmware.

• Satellite M40-101 cannot update firmware

  I tried to update firmware for my dvd - rw on M40-101 laptop drive, but when I start the program it says only "the target disk is not connected". What to do with it? the problem is perhaps cause firmware for dvd - RW drive Matsu * a UJ-831, but the model is actually UJ - 830B?

  Post edited by: ruselok

  Hello Ruselok

  Where did you find this update of the firmware? This firmware update is given by Toshiba?

• I tried to update the drivers that I used my motherboard Asus drive and some how it changes some firmware on the operating system

  OK, my problem is that I don't have a PC before generation. It is a custom build. A week ago while I was trying to update the drivers, I used my motherboard Asus drive and some how it changes some firmware on the operating system. now that is fixed. and now, just yesterday I downloaded the Windows Essentrils to win mail. This morning I woke up and started my PC and I get a red screen saying that some unauthorized to the firmware change has been done to solve this problem, I think I have to erase my hard drive and re to stall my win 7. and how do I do with the disc because it is a refurbished lic. Windows Essentials

  Yes

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Error while trying to update you my firmware to the printer. P1102w

  HP LaserJet P1102w

  Windows 7 (64-bit)

  I try you updated the firmware of my printer so I can use AirPrint with my iOS devices.

  When he finally "update", an error message is displayed:

  "HP LaserJet Professional P1102w!: Failed to update the firmware!

  Power cycle the printer and try again. »

  I tried to update when connected via the usb cable.

  Thank you

  Hi there georgegvd,

  The software requirements listed here claim that we must be able to print from the device. Can check you that we are always able to print from the laserjet?

• update firmware on Time capsule

  HELO,

  My time capsule (73300.1) airport in El Captain 10.11.5 indicate that the firmware is available. I tried to update, but the part "update" is not active I can just select "ignore". I tried to do the update with a macbook air and an iMac with wireless Internet and cable, without success. Could you suggest me a solution for this?

  An apple article is here: update the software on your base station AirPort - Apple Support

• Airport Extreme in brick after update firmware 7.7.7

  Error while trying to update the Airport Extreme (model A1521) firmware to version 7.7.7.  After clicking on "Refresh" for the EPA in the utility AirPort app on my MBP, it seemed like it was downloading and then restart, but then the "error during firmware update" message popped up.

  Then he disappeared from the AirPort Utility app. check the physical EPA, he got a quick Orange flashing light on.

  Perform a reset by mode on "soft" apple support  No change in status in the AirPort or LED utility.

  Perform a "hard" reset No change.

  Perform a reset "factory".  Solid green LED for 1 second, off for 1 second, then fixed Orange LED for 5 to 10 seconds, then orange flashing LED forever.

  Removed all connections to the EPAS, repeated above steps with identical results.

  Tried to plug the cable to all ports, a both MBP, then in a port to a different router.  No connection.

  Base from the bottom of the EPA to inspect the connection with the ohmmeter removed rubber physical reset button. Button contacts are open when not depressed, short circuit when pressed.

  EPA appears at all in the AirPort Utility (not in "Other WiFi devices" or the other).

  Pushing the reset button on the EPA has no effect, no matter how much time or when it is pushed.

  Once the power cord is removed and inserted, the indications are always the same, no matter what I do with the reset button. Green LED for 1 second, off for 1 second, Orange fixed for 5 to 10 seconds, then orange blinking forever.

  Interaction ONLY with the device, which had until this point was working perfectly for years, has been through the AirPort Utility software.  Physical interaction occurred after that the update of the firmware he bricked.  Simply, I do not understand how a botched firmware update might brick the MONKEY.  The default firmware must always be able to be loaded with the reset sequence.

  Help, please.

  You should not open it... Apple may have been told by replacing.

  Firmware updates are always dangerous... the airport less then most of the routers.

  However very rarely something can go wrong and the firmware written correctly to the ROM. This will leave the router in a State of broken forever. You need to replace unfortunately.

  He got a quick Orange flashing light on.

  Restore mode flashing quickly means that it is in...

  Perform a reset "factory".  Solid green LED for 1 second, off for 1 second, then fixed Orange LED for 5 to 10 seconds, then orange flashing LED forever.

  It flashes quickly or slowly forever?

  The ethernet light when you plug the ethernet cable?

  As far as I know, there is no firmware emergency repair method at airports... Apple has every confidence their sequence of upgrade to work, even when the firmware is delivered more wireless... always a big risk CF ethernet.

• Update firmware on Satellite A200-1gh - noise emissions under Linux

  Hello

  I have a serious problem with the sound on Toshiba laptop. Many people have the same problem I have.
  An example:

  ________________________________________
  Hi there everyone
  straight to the point, I got no sound running ' bt3 beta computer laptop - Toshiba satellite a200 - 14 d, HD audio - Realtek ALC862 @ Intel 82801GBM ICH7-M - audio. I tried to fix it with a blender Kmix or alsa, even downloaded the Realtek driver name and installed, but bt3 built in Realtek driver. Still nothing"
  ________________________________________

  My laptop contains this sound card: 00:1 b. 0 Audio device: Intel Corporation 82801 G (ICH7 Family) High Definition Audio Controller (rev 02) @ Realtek ALC861-VD. There is a problem somewhere in the firmware of this map or the Linux kernel.

  We use Backtrack 3 who is Slax based Linux distro.
  I've been with many professional talking about Linux, Bud, no one is really sure what is the problem. They said several things to try; one of them is updated firmware. I've never done this before, I'm looking for help.

  Number of exact model of my laptop is Toshiba a200-1GH psaece

  Please help if you can

  > There is a problem somewhere in the firmware of this map or the Linux kernel
  What are you talking about boyfriend? This firmware of the sound card that you hear?
  I think you're confused.

  First of all there is NO firmware for the sound card. Second, the sound card is controlled by sound driver.
  Always is it that Toshiba laptops are preinstalled with Windows OS.
  Linux is not supported at this time, and you won't find driver for sound card for Linux.

  If you need a sound driver for this sound chip, you will need to download it from Realtek Web site!

  That s all about your firmware to his mysterious map.

• Update firmware on Qosmio G20-> no target drive?

  Hello.
  I ve tried to update the latest firmware on my G20 and when I download the file and try to open it I got this message: "the target drive is not connected.
  Hmmm... strange ain´t that s he...

  How can I target then?

  Thanks in advance

  Hi ginbraiba,

  can you tell me WHAT file you download and what site? It would be helpful, maybe I can give you a solution to your problem.

  Welcome them

• L26500 61i: PROBLEM UPDATE FIRMWARE L26500 61i

  I can't update firmware. My latest firmware is 11.0.0.2 and when I try to upgrade to 12.00.00.5 I get this message

  SP - SP_12_00_00.5_mvl40 - x 86 - opt_B.signed.fmw: there are problems with the firmware file and the firmware update process has failed. The file you have selected may not be good, or the problem may be due to a transmission error. Please, start the firmware update process again. If the problem persists, please contact support.

  I tried to download it again, but it's the same thing...

  I have checked the connections on the back of the printer and found a LAN connection, I confused with the 360 LaTeX, sorry my mistake
  Another task to do, run the diagnostic menu of emergency update firmware.
  If issue still continue, run the hard drive recovery in the same menu

• Satellite A45: need to update firmware on DVR K12D drive

  Hello...
  IM new here... Well, I have a toshiba > Satellite A45 Series... which had a DVD Multi Drive (DVR K12D) inside. The problem is that his operation stopped. Sometimes she would write a CD then sometimes it spoils my CD. I used on the media player were Verbatin, Imation, Supermedium, Sony.

  Well the reader works as a very short period and then dies OFF... every time I took it to the repair center...

  The drive has been changed now 4times by toshiba support. I asked for the release of Firmware from 1.05 to 1.15 or higher. They keep answering back telling me to ask pioneer. But it is an OEM obvious by toshiba.

  The player after having been changed stops working without delay of 2 to 3 months max 4 months time and den customer tried upgrading the drive by putting a higher config recorder multi disc double tht is the 8 GB one. The satellite detects that hardware.

  been 2 years now my readers send me problems such as:

  does not read DVD
  doeant read CD RW
  don't write CD/DVDs
  sometimes DVD detects any sometimes they detect its weird.

  The only solution is to update the firmware, but how can I do? I need the update of the firmware. I called toshiba WE also, they talked for two hours and then answer that I have to contact pioneer!

  Please help me!

  Vik!

  Hello

  CD/DVD players support generally not all means.
  As far as I know in the manual you will find a list of the CDs and DVDs is supported and it works properly.

  In addition, it seems that this device was designed for an American market and in this case, you should look at the Toshiba Site us.

  I checked this American site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There, I found several notebooks A45 and the necessary drivers. I also found a driver for DVD rom and ram. It s not a firmware update but maybe it helps.

  However, on Toshiba Europe site, I found several updates firmware for the readers and the different European books but as I said at the beginning you have a US laptop and have to look on the American website. If you don't get an update of the firmaware if you ask the manufacturing of the car.

  In addition, I want to say that you can not be sure that, after updating the firmware of the player will not work correctly. This kind of malfunction looks like a defect of lens calibration and therefore only a replacement disc can solve this problem.
  If the drive has been replaced several times so I guess that the guarantee is valid and you will get a new.

• Update firmware of Web for failure to GS108Ev3

  I have money to upgrade to version 2.00.05 but do not have a very practical Windows machine. So I thought I would use the web interface.

  After entering the "loader" on the switch mode, I downloaded the firmware, only to find the router stuck in this mode charger with no way out.

  I tried:

  * reset

  * power off/power on

  * held reset for > 1 min (no effect at all).

  What I do, I will never return to the screen of the firmware loader. I saw a similar question for an earlier version (https://community.netgear.com/t5/Managed-Switches/GS108E-Firmware-Upgrade-Issues/td-p/372672) that was solved by using TFTP to download the firmware. That doesn't seem to work in my case.

  Ideas, or I need to get my hands on a Windows machine and try the utility?

  And an update: managed to borrow a Windows machine. The ProSafe (latest version) utility did not find even the switch. Nice!

  Then I tried upgrading the firmware of the chrome on the windows machine, and voila, that actually worked! What on earth could be the problem?

  So, to summarize: firmware upgrade of chrome or firefox on linux failed, Prosafe utility has not detected switch, Chrome on Windows, saved the day.

  I'm more confused as I was when entering.

• Need to update firmware for drive HDDVD of Satellite P200

  I bought my P200 - 17 c, 3 months ago. I tried to update my Firmware apparent more later (TO35).
  However I can't because I don't have any other installed TO33/TO34. After checking my FW version is TO04! ????

  How can I get previous versions so I can upgrade to the current version. I find it very odd that the current versions do not earlier versions already have with her.

  WHERE CAN I FIND THE FIRMWARE BACK TO THE SATELLITE P200?

  First that you check if you Satellite P200 has been equipped and supplied with the TS-L802A drive because TO35 firmware was designed only for this drive.
  You should know that the P200 series was delivered with different readers and not all support the TS-L802A ;)

  Please check first!

• C4599 Printer PC unable to find updated Firmware

  Hi all, I'm trying to update the firmware on my PC Windows XP (HP laptop). The software is downlaoded OK but when I run it does not find the printer. The printer is connected to my local network (infrastructure mode) via WiFi and prints OK from various computers laptops (Win XP, Win Vista and Win 7) in the House. It prints via WiFi or via the USB port but it can not be found with or without the USB connected to the PC (laptop) Windows by software update Firmware.

  Help, please!

  Thank you

  gedi42

  You suffer from one of the problems regarding the update of the firmware?

  I've actually found updates of the firmware available for your printer, only critical updates.

  Here is the update that I found:

  Update critical to prevent a State does not respond and prevent the State from error when connecting to a network.

  This is were you referencing?