TS API: Verify the presence of the variable
Hello
Using the TS API, is there a chance to see a variable as is?
For example, I'm not sure I have defined it called digital variable loss (Locals.Loss) and I would check it exists or not.
Y at - it order API to do?
PropertyExists ("propertyName")
Returns True if the property exists.
Tags: NI Software
Similar Questions
-
Is there a way to disable the melody and the optimization of the variables?
There are moments where you want to disable all the variables TUNE because when all are active, it is quite difficult to find the desired height variable and it may be lag sometimes.
If I want to disable all the TUNE and or optimization of the variables at once, is there a way?
A quick way to access to * all * the Tune and the optimization variables is through the DISPLAY VARIABLE BROWSER or SHIFT + F7 menu item.
The first picture shows the sample LPF_lumped project variables unsorted.
Left-click on the column header will sort and pull all verified variables to the top where they can be easily selected. A second click will reverse the sort.
The second photo shows the columns sorted and ready for clearing.
Please try this and see if it works for you.
Best regards
Vivek.
-
The analysis of the Variables of e/s channel properties
I have a situation in which I would like to configure the Daq on a cRIO since an interface of configuration on a Windows host. In particular, I would like to get IO addresses Variable for all analytical engine channels configured on the cRIO. The Setup program runs on the Windows host and impossible to deploy any demon on the RT which could question the material. He needs run as if the cRIO is not present.
The configuration program is part of the same project as the cRIO, so my thought was to analyse the project to find corresponding topics. Here's a post that does something very similar:
https://decibel.NI.com/content/docs/doc-16630
However, this has several problems. This example was written in 2011. I am using 2015. Apparently, the properties have changed since then. Children' find' (it is no longer named "children []") does not give me the chassis on my 9068 reference. Instead, I could use the property "Items Owned []", which gives a bunch of things, and then I search the TypeString of these things until I have find one that is "Chassis". Fair enough. Then the ref chassis gives me the Modules and the Modules of give me the channels. Seems pretty good. But all I get are the names of channel. I can't find all the properties that define the type of module or the direction of IO. For example, I would like to know if a variable is a Boolean or real, and if it is a path of entry or exit. You can deduct that the names 'standards', if the project has not been changed to allow giving them a meaningful name to create or. But it looks like there should be a way to find these properties directly.
Any ideas?
TIA,
DaveT
I think that the analysis of the project tree is a quite fragile strategy that you should know already. AFAIK the OR sanctioned for this sort of thing for a few years now is to use the API of the System Configuration. Yes, it's a pretty involved API and need you a little time to learn how to get the specific information you are interested in. Fortunately there are some examples that you can use to start with.
-
Why isn't 'if the variable does not equal null"work?
Pretty simple thing, I thought, but it drives me batty...
The Captivate 8.
I have a widget for checkbox and assigned variables to all 6 boxes (framework1, evaluation2... assessment6). I also have a variable called 'null' (thanks to lilybiri). The variable has no value for her.
So, I in my Advanced actions:
If assessment1 is not equal to v_null or
If evaluation2 does not equal v_null or
If assessmen3 is not equal to v_null
Le n
See submit it (button)
That means that if no the framework1, 2 or 3 etc... are verified, the assessment variables will be 'something' and not 'null' and should trigger showing button, but it does not work...
Any ideas?
Thank you!
Sorry, I give up. You seem not to understand that you need another approach. Especially your answer 1 is not correct, why has the right of v_none, you are not in the mind of the person who checked it? 2 you give the opposite, what happens if the user has archived v_none really because he won't? Anywat that it is not possible to verify this with a single action advanced conditional with two decisions, because the sequence needs to be reversed for the second situation compared with the first situation. Everything should be in a single decision, with THEN/ELSE, but I do not understand the logic, so you can not help.
-
Captivate 8 javascript error cannot find the variable cp
I created a responsive project with Captivate 8 trial (windows). The presentation will be to load and play locally, but when you go from a server, the presentation hangs on the preloader. He won't play in any browser. Safari on Mac Error Log shows the following errors:
Cannot find variable cp
Error /Du file / line cpInit index.html: line 17 initializeCP index.html: line 25 constructDIVs index.html: line 59 (anonymous function) index.html: line 71 b CPXHRLoader.js: line 37 (anonymous function) CPXHRLoader.js: line 37 A patch would be appreciated to Adobe. We are trying to launch a project of e-learning of Captivate on July 31, 2014.
After reading blog after blog, I discovered the Captivate team changed the variable "cc" to "CP" in the API. With the previous version of Captivate installed 7 caused the error for the variable javascript missing "cp". Uninstall the previous version of Captivate and publish the presentation, once again resolved the conflict.
-
How to check that the variable 'does not contain' value?
Hello
I use CP 7.0.1.237.
We want to use the widget text box for a custom quiz and verify a response. While we understood how to check the existence of certain key words, we are not able to find a way to check that the content does NOT contain certain keywords. For example, we want to ensure that the text entered in this widget does not contain a "Transformation" and "Non-compliant.
Is this possible at all?
Thank you
Anthony
Anthony, it works perfectly. Created this conditional action with 4 decisions. I used the interaction of training text scrolling in CP8 (because now you can control the variable - which means I might have a Reset button):
First decision:
Second decision (the third is similar to the following)
Fourth and final decision
I put the variable words (v_first... v_fifth), it's a reflex I use since I shared actions that much. The variable associated to the ETB (you can now reset an empty var in CP8) is v_TextArea and the Boolean value that will decide if positive feedback (StarOK) should be shown is v_TA_OK. If you want to display a negative feedback, put this in the ELSE part of the final decision.
FYI: it took 15 minutes, including the creation of assets and the variables and tests. Personally I would have needed more time to do it in JS, but that's just me.
Lieve
-
ODI 11 g | Passing the value of the variable ODI option procedure
Hi Experts,
I need to pass the value of the global variable / project to an option of the procedure and in the application of the procedure to retrieve. Procedure will be implemented in jython.
How can I pass the value of the variable option procedure ODI & then retrieve it in the jython script?
Model data source is the flat file based & I want to retrieve the location of the source directory using jython/java (must implement an on file preprocessing step before calling the interface to load). Is there an ODI API to retrieve the location of the source directory?
Thank you
AshishThe reason OdiGetOption won't work because odigetoption running will search for the name of the variable where like everything using the execution variable will look at the value of the variable.
In order to manage your situation i belive, we can establish by using the combination of getoption and global variable using the if conditionYou can write code something like that
If odigetoption == 'dat ':
ctrlfileExt = #v_CtrlFileExt
If odigetoption == "txt":
ctrlfileExt = #v_CtrlFileExtTxtThis way, when you call the procedure, you can supply the value of the extension and procedure will use the right variable and the value.
I hope this helps.
-
Is it possible the reel with the variable column size?
Hi, I'm queue to a CSV file with the following script (the SELECT real is different but similar, Oracle 10.2.0.3.0):
Which produces the following output:SET COLSEP ';' SET FEEDBACK OFF SET LINESIZE 2000 SET PAGESIZE 0 SET TERMOUT OFF SET TRIMSPOOL ON SET VERIFY OFF SPOOL test.csv REPLACE SELECT 'COLUMN1', 'COLUMN2', 'COLUMN3' FROM dual UNION ALL SELECT 'value1', NULL, NULL FROM dual UNION ALL SELECT 'value2', NULL, NULL FROM dual; SPOOL OFF EXIT SUCCESS COMMIT
Is it possible to get the following with the variable column size resultCOLUMN1;COLUMN2;COLUMN3 value1 ; ; value2 ; ;
I tried SET NULL "but I see no difference. Thanks in advance!COLUMN1;COLUMN2;COLUMN3 value1;; value2;;
MarkusHello
SQL * Plus you button the output so that each column has a fixed length, which is exactly what you don't want.
To get around this, concatenate all your data in a column VARCHAR2 fat with delimiters.
For example, instead of
SELECT empno , ename , hiredate FROM scott.emp ;
Do something like
SELECT empno || ';' || ename || ';' || TO_CHAR (hiredate, 'DD-Mon-YYYY') FROM scott.emp ;
-
How to use the variable in the coil
How can I draw a sequence number of the database and use it in a sqlplus spool file name...
This forum works as: sqlplus user/pass@sid@c:\file.sql
sample file:
BEGIN
declare
V_E_NUMBER varchar2 (7);
Start
Select "E" | LPAD (RWP. E_NUMBER_seq. NEXTVAL, 6, '0') IN THE DOUBLE V_E_NUMBER;
end;
end;
Select "E" | LPAD (RWP. E_NUMBER_seq. CURRVAL, 6, '0') IN THE DOUBLE V_E_NUMBER;
trigger the echo
SET THE POSITION
SET LINESIZE 430
set verify off
SET PAGESIZE 0
SET TRIMSPOOL ON
SET OFF calendar
SET termout ON
SET feedback OFF
coil d:\securedASP\CORE. BU34500.AR.'|: V_E_NUMBER |'. RECEIVD
Select * from table;
spool offHello
Use a substitution for that variable:
COLUMN v_e_number NEW_VALUE v_e SELECT 'E' || lpad ( RWP.E_NUMBER_seq.NEXTVAL , 6 , '0' ) AS V_E_NUMBER FROM DUAL; SPOOL d:\securedASP\CORE.BU34500.AR.&v_e..RECEIVD
Note that this does not at all use PL/SQL.
The variable can be used without quoting or concatenation.
Which can lead to situations where it is ambiguous as to which is part of the name of the variable (the variable is named ve in this example), and what is literal text that happens to come right after him. To resolve these issues, use a point to mark the end of the variable name.
In your case, you want a literal period just after the variable name, use two: one marks the end of the name, and the other is taken literally.Get the SQL * most orders
COLUMN,
The VALUE of CONCAT, and
SET
For more details. -
How can we give the values of the variable
Oracle Forms6i
Hai All
I'm generating a daily presence on the teams. In what I wrote an ifelse condition it work successfully and but he gets only 350 line on 800.
I declared a variable and I need to know how to assign values to the variable Pls tell the steps to follow. I did it correctly, but there is a logic error in my code. Let give me a few steps to solve the problem
My code is
declare
t_in varchar2 (25);
t_out varchar2 (25);
cursor cur_test is
Select * from dail_att where intimate = t_in and outtime = t_out;
-in t_in, t_out dail_att;
Start
loop
go_block ('TEST_SRI');
PREMIER_ENREGISTREMENT;
If: bartime between 0145 and then 0630
Update dail_att set = outtime: bartime where barcode =: bar code
and ATTEND_DATE =: bardate-1 and intimate are zero and outtime is not null;
elsif: bartime between 0630 and 0900 or: bartime between 1130 and 1230 or
: bartime between 1700 and 1800 and t_in is null then
insert into dail_att(barcode,intime,attend_date)
values(:Barcode,:Bartime,:bardate);
elsif: bartime > 1645 and t_in is not null and t_out is null then
Update dail_att set = outtime: bartime where barcode =: bar code
and ATTEND_DATE =: BARDATE and respondent are not null and outtime has the value null.
end if;
WHEN THE OUTPUT: SYSTEM. LAST_RECORD = "TRUE" OR: BAR CODE IS NULL;
NEXT_RECORD;
END LOOP;
forms_ddl ('commit');
exception
while others then
forms_ddl ('rollback');
message(SQLERRM|| dbms_error_Text);
message(SQLERRM|| dbms_error_Text);
end;
Concerning
Srikkanth.Muse you make of your variables t_in and t_out I guess you want before loading with the values they have in the current row of the cursor... I tried to offer you a way to assign a value to your [another post | http://forums.oracle.com/forums/thread.jspa?threadID=1019382&tstart=15]... see if this helps
Kind regards
Luca
-
What is the difference between the variable and set
WHAT IS THE DIFFERENCE BETWEEN
These different versions when it is done using the keyword "variable" and "set."
and these two are performed outside 'DECLARE '.
VARIABLE g_monthly_sal NUMBER
SET p_annual_sal = 5000
-I understand that p_annual_sal will be considered to be a TANK.
-ALSO if DEFINE the variable serves as a macro variable, THEN it is necessary to give it a certain value whenever we define.
If this is not the case, what value would it replace?
OR does that mean when we want to specify the data type for a variable binding, we should use VARIABLE and
When we do not want to specify type we use SET?
Thank you
Published by: user6287828 on February 24, 2009 11:03
Published by: user6287828 on February 24, 2009 11:04Both are SQL * most orders. In a real programming environment you will use these constructions (except in a few rare cases of scripts).
The difference is the way in which the building will be used later. DEFINE looks more like a string copy & paste. Wherever this substitution variable name is found, it will be pasted into the sql * plus the term.
VARIABLE creates a real variable. You can change the value and if follwos the usual principles of variables (including the link).Example can be found in the docs:
documentation
Where and how to use the Substitution VariablesYou can use anywhere substitution variables in the SQL and SQL * more orders, except that the first word entered. When SQL * Plus meets a variable substitution not defined in a SQL command * more will prompt you for the value.
You can enter any string, at the prompt, even a container of spaces and punctuation. If the SQL command that contains the reference must have quotes around the variable and you include here, the user must include the quotation marks when you are prompted.
SQL * Plus reads your answer from the keyboard, even if you have redirected the terminals input or output to a file. If a terminal is not available (if, for example, you run the script in batch mode), SQL * Plus uses the redirection file.
After you have entered a value in the prompt, SQL * Plus lists the line containing the variable substitution twice: once before replacing it with the value that you enter and once after substitution. You can delete this list by setting the variable to VERIFY OFF command.
The use of Bind Variables
Bind variables are variables that you create in SQL * Plus and then the reference in PL/SQL or SQL. If you create a variable binding in SQL * Plus, you can use the variable as you would for a variable declared in your PL/SQL subprogram and access the variable from SQL * more. You can use bind variables for things such as the storage of return codes or debug your PL/SQL subprograms.Because bind variables are recognized by SQL * Plus, you can display their values in SQL * more or reference them in PL/SQL subprograms that you run in SQL * more.
Creating Bind Variables
You create variable bind in SQL * Plus with the command VARIABLE. For exampleRet_val VARIABLE NUMBER
This command creates a variable binding named ret_val with a NUMBER data type. See the command VARIABLE for more information. (To list all the bind variable created in a session VARIABLE type without arguments).Referencing Bind Variables
You reference bind variables in PL/SQL by typing a colon (:)) immediately followed by the name of the variable. For example: ret_val: = 1;
To change this variable binding in SQL * Plus, you must enter a PL/SQL block. For example:BEGIN
: ret_val: = 4;
END;
/ -
SQL:-the Variables reset
Hello
I have a question about the SQl query below. I have 2 variables that are used in the two declarations. I don't want to be invited twice to the variables, so I used & &. I want to be able to run the same script again, but I want to be prompted for the date.
The SQl is for tasks that violate a given period of time. I want to be able to define the period each time, but only once per race for each variable
SET PAGESIZE 10000
SET VERIFY OFF
SET FEEDBACK OFF
SET ECHO OFF
/ * Tasks which has lack of ALS to add new asset - Single * /.
SELECT x.NUMBERPRGN're 18
OF CM3TM1 x
where x.ASSIGN_DEPT = 'CBCONF. '
and GROUP like '% ESP, % '.
and x.brief_desc like '% add new asset - Single% '.
and x.ORIG_DATE_ENTERED > = ' & & Date_From'
AND x.ORIG_DATE_ENTERED < = ' & & Date_To'
and (x.close_time > = (x.ORIG_DATE_ENTERED + 5));
/ * Tasks that missed SLAS for the categorization of the Incident * /.
SELECT x.NUMBERPRGN're fifteen years old
Of. CM3TM1 x
where x.ASSIGN_DEPT = 'CBCONF. '
and x._INIT_GROUP like '% ESP, % '.
and x.brief_desc like '% Incident categorization % '.
and x.ORIG_DATE_ENTERED > = ' & & Date_From'
AND x.ORIG_DATE_ENTERED < = ' & & Date_To'
and (x.close_time > = (x.ORIG_DATE_ENTERED + 5));
GAME TO CHECK ON
SET FEEDBACK ON
SET ECHO ON
Fouzi that makes sense. I need to know how to reset my variable. I tried to, I don't seem to get it to work
Published by: user3924223 on January 28, 2009 07:52Hello
Welcome to the forum!
SQL * undo the command DEFINITION will do what you want.
Say:UNDEFINE Date_From UNDEFINE Date_To
at the end of your script, or whenever you are using the old values.
-
iPod Touch 5th generation "cannot verify the identity of the server.
My school requires a log-in for which you have to go to in order to access the wifi. So first you log through settings, then you go to safari and search for a random page, and then the window should appear. However whenever I try to do, I still get the same message:
"Safari cannot verify the identity of the server.
Or something like that. Anywho, I tried to change my dates and times. I also tried to reset my network settings. My iPod is able to connect to anything but the school wifi, but all my friends who have iPhones and androids are able to connect and it begins to get really frustating. Please help me because I don't want to go to another 3 years without wifi at school.
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
ten seconds, until the Apple logo appears.
-Reset network settings
Go to settings > general > Reset and tap reset network settings. You will have to join all the wifi networks
All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.
-Restore from backup. See:
https://support.Apple.com/en-us/HT204184
-Restore factory settings/new iOS device.
-
Can not verify the account to download the free app Always get "Session Timed Out" message.
Can not verify the account to download for free enter or just about always "Session Timed Out" message.
Please describe in more detail what you are doing, and when it fails.
Do you use any type of VPN or RAM to access resources outside of your region?
Are you connected to WiFi when you do?
-
I had my Macbook stolen yesterday. I sent a locking control before I realized that I could not follow its location after. Once the thief logged today locking enabled as it should and now my chances of recovery are slim to none. Apple can verify the ip address where he sent the command lock and the provision that, as the last location of the Macbook?
N ° Apple did not send this command. You did and he was sent on the network.
Maybe you are looking for
-
My macbook air running hot and the battery drains quickly can help you with this problem?
My macbook air running hot and the battery drains fast is a 13 ", at the beginning of 2014. Processor 1.4 GHz intel core 15Can you help with this problem?
-
find the average of each 500 values in a column [text file]
Please help, I have a text file with three columns of integer values of hv. I need to take 500 values in each column and replace them with their average.
-
How to recover programs lost after the computer has been repaired?
Original title: ACER laptop help I recently had some work on my laptop ACER Aspire 5515 and the guy who worked on it took a bunch of programs out of my computer to help with the repair. I don't know what all he took off, but I want to recharge my de
-
Update installed win7 64 bit on 09/09/15. Update kb3087255 caused my ea games down. And when I uninstalled the games that they could be read. Anyone have the same problem. MS is aware of this?
-
working on the system of the window but in error on mac system
00:43:07 * incremental Build of the unit for project SafetyLink debug configuration *. make - j3 device-Debug do .//translations - C f Makefile update make [1]: entering directory ' / users/shubhendusharma/Documents/gitblackbery10/SafetyLink/translat