TTIMDB connection problems: cannot resolve a non optional application descriptor property [DSN]

Similar Questions

• HP Officejet 5740: HP Officejet 5740 printer for laptop connection problem: "cannot find a printer".

  I'm trying to set up my new printer Officejet 5740 and I got to the stage where I need to connect the printer to a laptop computer or mobile device. I went to 123.hp.com and follow-up stages. My printer is correctly connected to the internet, but when I tried to connect it with my laptop via wifi, I got a screen that says "cannot find a printer". Before that, he asked me to put the IP address that appears in the settings of the printer wireless.

  I have a dual band wireless router, and it seems that my printer can connect only to the 2.4 GHz frequency range. My laptop can connect to the scales of 2.4 GHz or 5 GHz. I made sure that the laptop was connected to 2.4 GHz when I did this step. I even Redid the same process on my sister's laptop (she has 10 Windows), but I came across the same problem. In addition, the screen with the error message says what must I make sure that the firewall has not been in the way of the connection. I tried to disable the Windows Firewall, but I still have the same result.

  I am at a loss for what to do here. Any help would be greatly appreciated. I'm positive, I put the correct IP address, and I even tried to use the host name. Also, I know that my laptop and the printer are connected to the same wireless network. Everything I did for this step in the installation process has been with wifi (not ethernet, USB, etc.).

  Good news! I thought about it. I have all my wireless settings to reset to the default factory settings and that fixed the problem. Something about the State of the router must have been extinguished when I put in place the first time. Thank you for helping me!

• Email connection problems: cannot access the requested url due to the system on that server error

  How can I get my email on when I get the above message

  Cannot access the url reqested due tosystem error on this server

  Apparently, there is a problem on the mail server. Contact technical support for your email provider. MS - MVP - Elephant Boy computers - don't panic!

• Oracle connection problem: cannot open the library

  Hello
  
  I'm using VS2010, Timesten 112241 and ODAC 1120320 on Windows 7. When I try to access database of TT using SQL Developer, for example, it works perfectly, but everything I try to access it from my application, he throws ORA-29158: could not open except for the library. I read a few threads on the forum about this problem, tried to copy the tnsnames.ora, sqlnet.ora and on the record of the new client after installing the ODP, set TNS_ADMIN to locations of files .ora, tns alias, the value, but nothing seems to work. Which library it refers? What Miss me?
  
  Here is the output of ttVersion:
  TimesTen release 11.2.2.4.1 (64 bit NT) (tt1122_64:53396) 2012-10 - 30 T 06: 32:14Z
  Forum admin: nikola.bajic
  Home Directory Forum: C:\TimesTen\TT1122~1\
  Accessible world
  Demon base directory: C:\TimesTen\TT1122~1\srv\info
  PL/SQL active.
  
  Here is the output of ttStatus:
  Daemon pid 1872 port 53396 instance tt1122_64
  TimesTen PID 1960 server started on port 53397
  C:\tt_temp\TT_ItemCache data store
  There is no connection to the data store
  Replication strategy: manual
  Agent caching policy: manual
  PL/SQL active.
  C:\users\nikola~1.baj\appdata\roaming\timesten\demoda~1\TT_tt1122_64 data store
  There is no connection to the data store
  Replication strategy: manual
  Agent caching policy: manual
  PL/SQL active.
  C:\users\nikola~1.baj\appdata\roaming\timesten\demoda~1\sampledb_112 data store
  
  There is no connection to the data store
  Replication strategy: manual
  Agent caching policy: manual
  PL/SQL active.
  Accessible by any group
  End of report
  
  Here the tnsnames.ora entry:
  tns_item_cache = (DESCRIPTION =
  (CONNECT_DATA =
  (SERVICE_NAME = TT_ItemCache)
  (Server = timesten_client)))
  
  Here's the code for the app:
  connStr = "user Id =;". Data Source = tns_item_cache;
  GetConnection (connStr);
  
  private OracleConnection GetConnection (String connStr)
  {
  Con OracleConnection = new OracleConnection (connStr);
  
  con. Open();
  return con;
  }
  
  Best regards
  Nikola

  Hello Nikola,

  Could you please put the code you are using, and the exact error you get. In addition, please check the env variables, as CLASSPATH, LD_LIBRARY_PATH and etc. here (java.sql.SQLException: problems with the native/lack of loading methods library )

  Also "verify that the entry in the tnsnames.ora file is associated with a DSN TimesTen or service_name in the simple connection string is set to a DSN TimesTen." (http://download.oracle.com/otn_hosted_doc/timesten/odpnet/readme.htm)

  Best regards
  Gena

• No internet connection. Cannot update Creative Cloud desktop application.

  I am trying to download and update my current program selections, but I can't update the desktop app to do this.  When the application is started it just indicates that he has no internet connection. Is there a setting that should be changed?

  Hi André,.

  Please check the help below document:

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-files-wont-connect.html

  You can also view the threads below where this issue has been addressed:

  How to fix the 'No Internet Connection' error

  Creative cloud does not connect to internet

  Kind regards

  Sheena

• Failure of the motorway E - there are network connectivity problems or this peer has different support encryption (AES / non - AES software)

  I have two websites and a cluster CPU as below:

  site - 1

  CUCM pub-1

  Pub 1 CUC

  imppub

  exp-c-1

  exp-e-1

  site-2

  cucm2

  CuC2

  IMP2

  exp-c-2

  exp-e-2

  !

  I do a bunch of highway E and C, but it I show error on cluster of highway E:

  Failure - there are network connectivity problems, or this peer has the support of different encryption (AES / non - AES software)

  This highway is part of a cluster, but is not the master of the configuration. Configuration changes made on this highway may be lost. More information about the Clustering help page.

  !

  What is the solution to fix it?

  Locally add cluster of highway or having to make cluster of 4 motorway between locations?

  How far are the peers of the highway on the other, what is the round trip time?  This should be within 30ms.

  Can you confirm that all highways in the cluster have the same keys option installed on all peers, as it is a requirement, call license quantities can be different, but the features option enable/disable keys must be the same.  Additionally, make sure that the version of the software installed is the same, that you have a version mismatch or could be active where encryption the other not.

  Regarding the "this highway is part of a cluster, but is not the master of the configuration... '. "this message is normal for a node that is not the master, as it is said just only make changes on the master, since all changes on the slave will be replaced by the master.

  Suggest you watch on creation of Cluster Expressway and maintenance Deployment Guide (X8.8) in case you have not yet.

• How to enable detailed connection tracing ODI Studio? and how do I resolve a connection problem.

  Is it possible to get a detailed trace of connection attempts from the studio of ODI on my deposit work?

  I tried to enable tracing in changeant...\oracledi\client\odi\bin\ODI-logging-config.xml according to the instructions that I found here: http://haithanh8x.blogspot.com/2013/03/ODI-11g-agent-logging-tracing.html

  The studio.log file has been created, but it is empty.

  I use studio ODI and basically I want to troubleshoot why I can't connect to the repository. When I try the Test button, I get an error "Invalid repository connection", here is the error that is displayed under Details:

  oracle.odi.core.config.WorkRepositoryResourceFailureException: ODI-10182: Uncategorized exception for access to the repository.

  Could not make JDBC connection; nested exception is java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLRecoverableException: IO error: the network adapter could not establish the connection

  at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:195)

  at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:531)

  .........

  .....

  ..

  Other important details:

  1.-s' Please note that before I use the Test button under the repository login Panel, I'm able to choose my work deposit that was recovered in the receiving of work section using the magnifying glass.

  2 - I am able to connect to the database with SQLDeveloper using JDBC, in fact I can connect with exactly the same connection string that I use in ODI, also I have no problems connecting to the database using SQLPlus.

  3. - this repository database is on a cluster and as mentioned, I have no problems to connect to it with other tools. Don't know if being in a cluster makes a difference (I tried hostname, scan name and the names of vip to connect)

  4 - this database is running in another server, and I have had no problems connecting to the front. In fact, I restore to a different server no CARS and was able to use ODI. (maybe something in the new RAC server that does not allow the connection?)

  I would like to get a path to better understand what is happening while the Studio tried to connect to the repository. It seems to me it is able to read the name of the repository work so I don't understand why there are connection problems later.

  Question: is it the fact that I am able to read the repository name means JDBC work? (Please confirm)

  I'm running out of ideas on what to try, so your help is appreciated.

  Thank you!

  Answer the questions:

  1-to get a detailed trace

  One option is to use a thick connection instead of a thin. This requires the installation of customer Oranet and settings but allows you to trace the SQL in the side server. That will let you know what the problem is.

  2. to turn on tracing

  Under search support Oracle Oracle Data integrator, there is an information center that includes detailed instructions and examples (files) on how to configure tracing.

  3 - If the test button works and pulls the name of the repository work means that the connection works, unfortunately, is not sufficient because ODI does not use the connection string supplied to connect to the repository instead, it uses the language sql stored in the repository and uses SQL to connect, so location you will see two connections for the initial attraction of the repository data, and then the other link with the chain withdrew from the database. In this case, the problem was that the database of repository has been migrated to another server, the previous server that the connection was made with localhost, but it does not work on the current server, because it runs on CARS, so outside the ODI, I updated the SQL used to connect with the SCAN name instead , and I was able to connect. The SQL is illustrated in the trace obtained using a thick client.

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• Get the error code: 0 x 80041003 in Event Viewer. Events cannot be delivered through this filter until the problem is resolved

  Original title: - what the heck is - this?

  Can someone tell me what this means - in English?

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I get this topic once per hour in my diary of events 'Application '.  The Source is: Microsoft-Windows-WMI and the event number is: 10

  Every word is understandable and I know what they mean, but how they are threaded and beat me to the syntax.

  Bill

  Thanks for the reply, Gerry.  I'm no stranger to computer, having started in 1962 in the Navy for 20 years.  The HD is fine.  I used the Hitachi software testing to verify this.  RAM is also fine after running MEMTest for about 17 hours.  CHKDSK shows up at all no error.

  I agree it could be caused by a hardware fault and looking for that I ran some tension and trials of O-scope on the motherboard.  The only discrepancy I found was Aida64 Pro told me that the 3.3V rail was only 1.75 v.  My DS was told that the rail was 3.327.  This led to the conclusion that maybe the sensor was messed up.  I have an almost identical computer with a motherboard in the same series and Aida reports that rail even as 3.319v.  So, I think that the motherboard may be offset slightly.

  The re - install is an easier way to remove a large number of applications I just didn't need more and had not touched in over a year.  Revo even would have struggled to clear the registry after such massive uninstall.

  I found that the results from a command prompt is quite easy if you issue the command once, read the results on the screen, and then do it again but to redirect the output to a text file ("' do_whatever > test_output.txt '").  All you have to do is cop0y and paste a post.

  This re - install and the subsequent installation of SP2, seems to have solved the error of the event: for now.

  Bill

• Connection to the single local: NONE of your solutions have worked, and I'm not paying $ 50 for you to continue to doesn't solve is not my problem...

  I tried all of your "solutions" including regedit, I tried to disable internet protocol version 6 or w/e and none of this even came close to work. I NEED internet to do school work, on a laptop, but your software is blocking me completely to do this... I don't have $ 50 to spend on sit on the line with someone who will not solve my problem, and I don't have the money to spend on an another crap software update...

  FIX my problem of fools.

  Hi mane83triple

  Could you tell me something more about your problem? I understand that you can not connect to the Internet. Can you give me more information about all the steps you tried? And the exact error you are getting?

  Try these:

  Step 1: R of the United Nations, the Network Diagnostics tool.

  To make this problem troubleshooting, please follow the steps below.

  (a), click on Start > Control Panel.

  (b) click network and Internet, click network and sharing Center.

  (c) under network and sharing Center, click on solve the problem.

  Disable the firewall\security software that is installed on the computer and check for the issue.
  Note: Enable security software \firewall once the test is done.
   
  Step 2: Also reset TCP\IP.

  You can also go to these links that talk about Internet connection issues:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://support.Microsoft.com/kb/930517

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Also visit the sites that talk about problems similar to yours:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/0adb02c7-2b46-4754-AEAF-265a32f6cd62

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/739a9733-5dfc-4263-9BF6-df0cbfb6f08e

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/0949042d-074e-43ab-ba95-3c06cc2aa6be

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/dbdc73e2-d5b1-4BA4-AA2F-218ce2d24c6e

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to connect the Sony Walkman to my PC, receive error message WPD Enhanced peripheral of storage drive has a past problem cannot start [code 10].

  Original title: drive WPD Enhanced password storage has a problem cannot start [code 10]

  I tried to uninstall and install but nothing works I'm unable to connect my sony walkmann more

  It does not charge or sync with the device.

  apears there is a problem with the password for the improved wpd storage disk

  Hello
  1 did you change on your computer before this problem?
  2. What is the model of the Sony walkman?
  3. what happens when you load the device?
  4. What is the brand and model of the computer?
  WPD (Windows Mobile) devices allows computers to communicate with attached and peripheral storage media. WPD offer a flexible and robust way to computers communicate with readers of music, storage devices, mobile phones, cameras, and many other types of connected devices.
  Check if the device works fine on another computer.
  You can also follow the steps in the article mentioned below:
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
  Post your answer for you help in this matter.

• Problem with "TCP/IP not enable for this connection. Cannot move forward. "

  I am struggling with his wireless Dell Wireless 1450 USB Adapter. In the XP Device Manager, it seems to work very well. But no wireless connection is made with my upstair wireless router, that it is bound to for more than 2 years. When I tried to repair the connection, the following screen message appeared:
  "windows could not finish repairing the problem because it is impossible to perform the following action:
  TCP/IP does not allow for this connection. Cannot continue. »

  I tried uninstalled, then installed again.  But nothing improved...
  What should I do?

  
  

• Cannot open websites, error DNS when the ping command cannot resolve the name

  Cannot open all websites on a PC. (other computers on the network can access the sites without a problem)
  Error message is "Internet Explorer cannot display webpage."

  I can ping (internal and external) of the IP and gateway addresses.
  Ping translates:
  C:\>ping www.yahoo.com
  Ping request could not find host www.yahoo.com. Please check the name and try again.

  Nslookup translates:
  C:\>nslookup www.yahoo.com
  Can not find the name of the server for the address 192.168.0.1: non-existent domain
  Default servers are not available
  Server: unknown
  Address: 192.168.0.1

  Non-authoritative answer:
  Name: www-real.wa1.b.yahoo.com
  Address: 69.147.76.15
  Alias: www.yahoo.com, www.wa1.b.yahoo.com

  Pathping translates:
  C:\>Pathping www.yahoo.com
  Unable to resolve target system name www.yahoo.com.

  The problem occurs on a wired and wireless connection.
  Reset TCP/IP via netsh int ip reset c:\ressetlog.txt results in the following in the log file error message:

  discount Linkage\UpperBind for USB\VID_0B05 & PID_1723\5 & 2461925A & 0 & 5.  incorrect value was:
  REG_MULTI_SZ =
  SymIM

  Is there a total of 9 errors in the log similar to the one above.
  The host file has only 127.0.0.1 in there.
  Clearing the cache of the arg, flushing the DNS and do a repair on the network connection does not resolve the problem.
  Install a new network device does not resolve the problem.
  I also deleted all the antivirus software and security, including firewalls.
  The Windows Firewall is disabled.
  Boot in safe mode with Networking does not solve the problem.
  Running Winsockfix does not solve the problem.
  Internet Explorer 8 (reset web settings has been done)
  Windows XP Media Center with SP3
  Execution of the IE Diagnostics results in an error 12007 the server name or address cannot be resolved.

  Get the end of the line...

  Any other ideas?

  Thank you

  Larry

  Sorry for the late reply, but I did not have access to the MS Web site for a few months.

  I tried your suggestions, they do not work.

  The resolution is to do a repair of the operating system out of the CD.  Who cleared up the problem.

  Thank you

  Larry

• HPlaser 1102w: HP Laser 1102w with Mac wifi connection problems

  Right. Hello. Basically, I've had this problem before and someone else fixed, now he has done it again and I really need someone to walk thorugh some steps. Forgive me if it's something really easy, but I'm not a tech person.

  The Maverics, wireless printer Mac was finally up and running, everything was fine.

  Owner changed the router on a better and faster. Yay!

  Printer will connect is more to the Mac. Boo!

  If printer will work when plugged into my computer, but is no longer trying to get wifi.

  I am a PhD student, I really need a printer to work... not to mention, I have three classes to teach next week and may not print all what I need for the class without sitting on the floor, which is fine for some, but it would be much easier if I get this sorted wifi thing and know what to do for the next time this happens.

  Tried to go through the open printer settings of utility, utility will not open. I'm pretty sure that this is where I need to change the wifi info so it can recognize the connection, but cannot understand why it won't work. (Please correct me if I'm wrong!)

  So basically, I need someon to walk me through how to get this recognized for my wifi.

  I know that others have understood a work-around on it using the PC of someone else. This is not really an option.

  Anyone can guide me please you through what to do here, how to get this bloody printer to recognize the new wifi Info? Any help would be appreciated to greately. When this printer is working, it's great. But when the slightest thing goes wrong...

  Thanks in advance. Screenshots and Cape ' do DummySpeak would go a long way with me. I am a student in art, tech, not so much.

  Thank you!!

  Hello @maddyjames,

  Thank you for showing your interest in the HP Forums! I see that you want to configure the printer on the new network. I would like to help.

  Restoration of first default printer.

  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration page to make sure that the old network settings are disabled: print a Configuration or report Page.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Remove the printer in printers and Scanners. Plug the USB cable from the printer to the Mac, and add the printer again. Make sure that it shows just the name of the printer. LaserJet P1102w. You may need to run the Apple updates.

  Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

  LaserJet P1102w.

  You can follow the steps rather than watch the video if you want.

  Then go to the Apple, system preferences, printers and Scanners.

  Highlight the Laserjet on the left side of the window.

  Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

  The integrated for the printer Web server opens.

  Click on the network tab, select Wireless on the left side.

  Fill in the information for your network. Make sure that the infrastructure is selected. Status: Make sure that you select enabled.

  Apply the settings.

  Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear)

  Remove the USB printer in the list of printers and Scanners window.

  Disconnect the USB cable and try and print.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• Satellite L100 - connection problems with a wireless internet connection

  Hello

  I had some of my Satellite L100 connection problems to my sky wireless broadband connection. My laptop detects the connection and I have a bubble appears confirming that the wireless connection is connected. However, when I open internet explore it appears with 'cannot display the page'.

  Now, the wireless works with our other non-Toshiba laptop so I know that the connection is ok but it does not connect with my Satellite. Is there something I can do?

  Try reboot you the router. In many similar situations, it helps me.