Tungsten E2 is traversed all categories whenever I hit the power
An hour ago, I heard a strange ticking my Tungsten E2 rapid. I looked at the screen and it has been quickly covered all categories (hand, games, system, etc.) and nothing I pressed it would cease. I tried a soft reset, but as soon as I press the power button, the cycle began. I tried to reset, but it would not reset (I guess because the power button is no more record as the power button).
First, is what I can do on this issue, and in second place, is it possible to reset without using the power button?
Do not take out the battery. It's my mistake thinking that you had a different device. In this case, the next step would be to have the unit repaired/replaced.
Tags: HP Tablets
Similar Questions
-
I was just in Firefox 4. Now, whenever I hit the home the current page button goes to my homepage (which is what I want), BUT it also opens another tab - I just want to go to my home page without having to open another tab that I then have to close. Any ideas?
Gotcha. Go to your desired homepage and close all the tabs you want to NOT open when you click the home button. Then, you have several ways to update the home page setting as described in the article.
-
How to make a new paragraph in a message? Whenever I hit the button "enter/return" the message is sent and all I want to do is make a new paragraph! Which button I hit to make a new paragraph?
Option-return.
-
From a security point of view, I don't want to not allow Adobe Flash in my democratic security but whenever I hit the sayinf box not to allow that box keeps popping up even though I tell him permit. Very frustrating.
In Internet Explorer, go to Tools / Internet Options / Security / Restricted Sites and add the Adobe site sends you this popup (or add all adobe). To block messages, even as pop-up windows.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
As I said whenever I open firefox I get 3 additional tabs to the home page. After that, whenever I hit the home button I get 3 more. Very fast, I got 1 million tabs and capabilities. I went to internet explore and connected and I have no problem. The only thing I can get from that is that I have a problem with firefox. I have been using firefox for a couple of years too.
Thanks, Larry
See https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page and change your homepage settings
-
I reset my Apple Watch and I can no longer use it, whenever I press the power button, it gives me the sign of loading
Hello
Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo.
-
Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried to re - download several times. What should I do? Here is a picture of what happens:
See if the following can help:
White screen
-
I bought a new camera with a disc of Adobe Photoshop Lightroom 5. I have a pc with windows 8.1 windows. I downloaded and deleted about 5 times. It says installed properly, but whenever I hit the icon the pc hangs and I have to restart AID
Uninstall your lr 5.
install lr 5.7.1 and use your serial number to activate.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 5.7.1. 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
HP Envy 7 - stupid display question whenever he loses the power of food
I have a HP Envy 7 with double graphics chips.
Whenever I unplug it from the power outlet, he returned to the chip of lowest power... and applications / internet page I had opened earlier becomes black.
And if I start new applications or open new Web pages, there is a delay of 1 to 2 seconds before the screen is loaded.
It remains like this when the power is restored, and I have to restart the computer for the sort.
Just one of many things that I don't like this machine, but currently the most boring.
Is this a known issue?
Hello
It is something that can be changed by a setting.
Right-click on an open space in the office and select Configure switchable graphics. In the Catalyst Control Center, remove the tick at the bow of the option switch automatically to the GPU when on battery power saving . Now just click apply and it is changed. Close the control center.
Best regards
ERICO
-
whenever I hit the help in the taskbar it help & support not able to boot
original title: help & support does not
whenever I got help on the bar he spots help & support not able to start do - what I do
Hi Frank,.
Try this:Go to start/run and
type: helpctr - regserverTo reinstall the help and Support: go to C:\Windows\inf\pchealth.inf. Right
Click on, then choose install. Have your CD at hand.Note: The folder is hidden by default. Go to start/run and type in: control
records. View: Display the hidden files and folders and uncheck Hide extensions for
known file types.
hope this helps,
Eddie B. -
I looked in the help section and it says click on the gear icon. The spectacle of improved, classic, white screen. I don't see any of them. I'm in Firefox 35.0.1. I uninstalled and reinstalled and there is no change to the problem of ch. I recently installed Fitbit and then the sentence began occurring.
JohnBergacs said
I looked in the help section and it says click on the gear icon. The spectacle of improved, classic, white screen. I don't see any of them. I'm in Firefox 35.0.1. I uninstalled and reinstalled and there is no change to the problem of ch. I recently installed Fitbit and then the sentence began occurring.
Unfortunately the suggestions that I had to correct the situation do not work. I also saw that I had a program installation Meida 383 occur when this started. I am not able to uninstall the program because Norton Antivirus automatically removed some of its parts (au_exe has been deleted).
I just checked the comments: config page and the browser.newtab.url is listed as: status = User Set. Type = String; Value = http://webmail.verizon.net/signin/
-
Click 'home', two more empty tabs open.
Open firefox, click Tools, click options, select 'Général' and then check the box to the URL of your home page. Make sure that the URL of your home page not intervened twice.
-
When I type the original Firefox key brings back me to my home page (AOL), but also opens a new tab in Mozilla Firefox Start Page. I find myself with plenty of unwanted tabs.
This has happened
Each time Firefox opened
is always
Hello Ismahil.
Please, check the following:
Click on Tools > Options.
Then click on general.
Now, it must be said: http://aol.com/ (or similar), but please check if it has something after that. For example, if there is a | after him, who says FF open 2 pages when you press the home button: AOL and the other page, which in this case is a blank page.If you see a | in there, go ahead and set or remove, if you wish. If this isn't the case, please post here and let me know!
-
I'm trying to redirect the error page 401 for the SharePoint site to windows authentication?
Hello
I suggest you to report the problem in this forum:
http://social.technet.Microsoft.com/forums/EU/sharepoint2010setup
It will be useful.
-
I'm not crazy, he used to work. I could use the palette line up to put my guides centered, right-aligned, left-aligned, etc. I started having this problem in CS5 when I hit the button Align and the guide would go completely out of the drawing surface. I thought it was just a bug and would leave with upgrade to CC. But I'm getting the same problem! So boring.
It's an old bug that sting when you line up with the palette alignment guides while using an extract of the limits is selected.
You can disable it in the General preferences or in the drop of the alignment pallet.
Maybe you are looking for
-
Hello.. Where applications are downloaded on? Thanks in advance! Carolyn
-
The screen backlight not working anymore on Satellite M
Hello I have a problem with my laptop screen. The backlight of the screen does not work no matter how suspect more and I switch that turns off the screen when I close my laptop is broken. When I press the power button and release, a fast and light th
-
Satellite A100 - the fan runs at high speed after idle standby
Hello My laptop is Satellite A100-912. The problem is when I suspend it for more the a few minutes when the fan is running at high speed. This occurs on both Windows XP and Linux GNU. When the temperature of the two nuclei will more then 51 degrees C
-
I try to export iPhoto albums without individually create files, naming them and then export. Apple has a way to export albums like named subfolders?
-
I have Norton installed security so why Windows security alerts constantly tells me my computer is at risk? Is it better to have one or two installed intra?