Turn off the section of the script while testing

Similar Questions

• AP turns off the channel while identifying the threats of rogue ap

  I'm having a problem where client connections deleted, when the AP identifies a threat to ap rougue.  In some cases, the customer never falls 5 minutes up to 30 minutes.  My clients are connected via an authentication of installation with service IAS RADIUS.

  Found this on Cisco's Support site:

  Cisco lightweight access points are known turns off channel 30 seconds (usually 1 to 2 seconds) while identifying rogue access point threats, when Cisco lightweight access point has active RLDP. This may cause client connections to be removed from time to time (CSCar10047).

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/r1x4x31.html

  RLDP must be disabled enabled?  Is there a work around for this?

  My WLAN environment:

  -Controller - WLC2106; version of the 6.0.182.0 software

  -1242ag access points (3)

  -(1) 1131ag access points

  Thanks in advance.

  If you like to keep connected clients I would turn it off

  http://www.Cisco.com/application/PDF/paws/70987/rogue_detect.PDF

• Is there a a way to turn off the screen while using a DOS program?

  I have an A4 and recently when you use a program to BACK hard drive (which may take several hours) I found that I was unable to turn the display off.

  Of course, the usual display controls depend on Windows but surely there must be a way to do this in the BACK?

  Hello

  I don t think that there is a way to use a DOS program. All Toshiba and public services programs are designed for Windows OS and they work only in Windows environment.
  I m no programmer but I think it s is not possible.
  Moreover you will not find any solution to your problem. There are users looking for solutions to common problems and questions.
  In my opinion, look for a solution in forums for programmers and software developers.

  Good luck

  Good bye

• How to turn off the sound recording on a Camileo H20?

  I just got a new VCR Camileo H20. Directly from the box.

  I use it for video road races to complement the photographs that I take with my Nikon digital camera.

  I am really satisfied with the short video clips that I record, whether they are clear and sharp (fingers crossed). They are very well received by the riders.

  * http://www.youtube.com/watch?v=_bNCKCKafCw *.

  The only problem I have is that I would like to turn the microphone off. Supporters cry comments that are usually fairly light, but recently one or two went over the top with comments derogatory offence.

  I know I can turn off the sound in the video editing software that I use, but as I said, I would like to turn the microphone off.

  I do not understand why, when I put the * sound * to * Off * in the Menu it still records the sound.

  Any help on this would be really appreciated.

  Thank you.

  > I do not understand why, when I put the sound on Off the menu it still sound recordings.

  I m H20 not owner but I have a Camielo: 30. But the two are very similar, the sound-> off the coast of the option that you can find in the menu does not sound recording via microphone, but the sound that appears by pressing the buttons by navigating through the menu.

  If you can not turn off the sound while you record a video.

• How can HF r600 I turn off the display when I save?

  I want to reduce my battery drain while recording events any longer.  How can I turn off the display while recording?

  There is an option to disable "Power on by using LCD Panel.  This deactivation allows you to record with the LCD closed and so will extend the life of the battery while recording.  The option to disable should be found in the configuration menu of the system (which resembles a key) and the option you choose is 'Off '.

• Failing to turn off the Satellite P300

  When I try to turn off my laptop (Satellite P300 with Windows Vista Home Edition), which is to end the session and cut off the power supply, the laptop restarts rather than turns off.

  How can I correct this defect?

  Satellite P300 is not the latest model laptop, and I assume that you have some time?
  Since when you noticed this problem?
  You installed Microsoft updates before it starts to happen?

  Try to define the button / stop like turn off the laptop and test whether the same thing will happen again.

• Can I turn off the display on the Qosmio X 770 while I am running programs?

  Can I turn off the display of my Qosmio X 770 while I'm running programs such as virus scans to save power and the screen? Most laptops have a function key to enable this.

  Hello

  Of course you can do it.
  You can change the settings of your central in Win 7 power management settings.

  Go to the control panel-> power-> Plan on changes of settings Options

  Now, change the setting to turn off the display.
  I would have put a min

  In such cases the fi would not touch to the laptop for a min the screen turns off

• After the upgrade from Office 2007 to Ofice 2010 on my Vista, then my computer turns off after being idle for a while.

  After upgrade Office 2007 to Office 2010 on my Vista, then my computer turns off after being idle for a while. When I turn on my computer, I get the splash screen indicating that Windows has finished unexpectedly and I would like to start in safe mode or normally (pluss a couple more choice...).

  Appears not to occur if there is activity going on--as if do me some work or have itunes playing music or I'm just surfing the internet. Curiously, it seems not to happen if I close Internet Explorer and Outlook.

  I shot all automatic updates for Windows Vista (32 bit) and Microsoft Office.

  Concerning

  B Odd Andersen

  Hi B Odd Andersen,

  I want to clarify if your computer seems to be sleeping or it completely closed after being idle for a while.

  Method 1: If the computer is in power saving mode, check if you can wake the computer from this State by moving the mouse or pressing any key on the keyboard.

  Method 2: Change the power to another and check to see if the problem persists
  Change, create, or delete a power plan (scheme)

  Method 3: check the logs in event viewer for more information on auto-off down

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Note: For your safety and security, it is not recommended to disable Windows Update.
  Activate the update or disable automatic

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to turn off the display after a while without input

  Original title:

  Activate the screensaver mode full-screen.

  Hello

  Windows by default is to disable the screesaver mode when an application runs in fulscreen. I need to enable it. I need to turn off the display after a while without input. So is it possible to do?

  Hello

  Thanks for choosing Microsoft Community to post your question. Windows 7 comes with the power settings using which, you can turn off the display when it is idle for some time.

  Please visit the following links and set the option to turn off the display according to your requirement.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Power management

  http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management

  Hope that the information provided is useful. Do not respond if you need more help.

• How to turn off the menu in the middle of the screen while you take a picture?

  Hello everyone!

  It's something similar to this post: turn off the menu in the center of the screen.

  But the problem is displayed while taking a photo: I am posting one alarm full screen mode and wait for the interactions of the user on the screen or on the action button. This interaction takes the picture (and triggers my specific treatment), but it also displays elements of specific menu in the middle of the screen.

  Are there settings to set the field that contains the VideoControl to avoid this behavior?

  Thanks in advance.

  OK, the solution is to add a "return true" after the specific action, like this:

  protected boolean invokeAction(int action) {
      boolean handled = super.invokeAction(action);
      if(!handled)
      {
          if(action == ACTION_INVOKE)
      {
              takePicture();
              return true;
          }
      }
  }
  

• Turning off the screen of the device while loading - pink

  Last night, I forgot I had the player load via the AC charger and attempted to turn the unit off when I noticed a pink screen lights up but the screen went dark before having seen what was the info.  What is the info that appears when you try to turn the unit off when it is supported?  Any possible damage to the unit?  (It still works fine)

  If you try to turn off the drive so that it is connected to a wall charger, I think that the pink screen message is "Go to stand-by Mode" or something similar. It isn't anything to worry about.

• How can I turn off the monitor (e.g., "standby") via the command line at the push of a button (or any other shortcut need not additional software)?

  Hello

  I don't like it when, after a break from work on my PC, the screen turns off as set up through "Power Options" in the control panel. That's why I put the relatively high threshold.
  However, when I know that I will not need the computer for a while, I want to save energy and wish the mode "sleep" could be activated immediately. Turn off the screen is not an option, because it has a USB hub built-in - off completely would be to unplug any connected device. Usually, if the computer has always works and might need the resources connected.

  Ideally, by pressing a button (or start a program or something), the screen would immediately go in mode 'sleep'.

  On systems prior to Vista and 7, IIRC, running a command in the sense of:
  Rundll32.exe user32.dll, SendMessage (HWND_BROADCAST, WM_SYSCOMMAND, SC_MONITORPOWER, 2);
  would do the trick. The dll should run the command to set the monitor to sleep. We could create a shortcut or even integrate the command in a batch file, but unfortunately it doesn't seem to work on Vista or 7.

  Does anyone have an idea on how to do it on Windows 7?

  I would strongly try to avoid having to install any additional software to help me. (There is quite a little all about, even free applications that promise to do exactly that, but I want to avoid them if possible.) "And I can't believe that this basic that could be done on XP cannot act more on 7!).

  Thank you for your help,
  NicApicella

  Hello

  Sleep is one thing and switching Off the Display is quite another.

  I found a way to turn off the screen in case you don't have a hardware switch or a keyboard shortcut as in my Dell Inspiron laptop (Windows 7).

  Create a batch with the following script file:

  echo off

  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc 1
  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac 1

  START/min/Wait C:\Windows\System32\scrnsave.scr s

  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc m1
  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac m2

  with the idle time to turn off your screen set in the Control Panel, replace m1 and m2.

  Control Panel > Power Options > any 'Active' diet Plan > change Plan settings > disable the display setting (minutes).

  For example, in my computer laptop m1 = m2 = 30 and 10.

  Now create a shortcut to the batch file and optionally assign a keyboard shortcut and an icon.

  Explanation of the script:

  The first two commands sets the idle time Display Off for the minimum possible setting of 1 Minute for the AC and DC (battery) power. The third command put the system mode blank screen saver 'instantly' and / Wait for the screensaver to terminate application. After 1 minute of inactivity, the monitor turns off power completely.
  The Saver screen/Wait is over by the event of the reactivation of a movement of the mouse button, the last two lines of code will come back the idle time-out settings of origin defined in the Panel view. This to ensure that after waking up, the display does not Turn off all 1 minute of inactivity expire.

  Kind regards

  Sushovon Sinha

• Disable on screen keyboard without turning off the touchscreen (regarding the use of Microsoft Word)

  I don't want to turn off the on-screen keyboard.  Whenever I'm in mircosoft word, typing a document, it is upwards.  I use my fingers to scroll and down to my Word document while I work on that.  But if I touch the screen wrong then the on-screen keyboard appears.  It is very stirring.  I want to disable the onscreen keyboard without turning off the touch screen.  How can I do this?

  My question has nothing to do with the signature in my computer.  It has everything to do with me working on documents in Microsoft Word.

  I don't want to turn off the on-screen keyboard.  Whenever I'm in mircosoft word, typing a document, it is upwards.  I use my fingers to scroll and down to my Word document while I work on that.  But if I touch the screen wrong then the on-screen keyboard appears.  It is very stirring.  I want to disable the onscreen keyboard without turning off the touch screen.  How can I do this?

  My question has nothing to do with the signature in my computer.  It has everything to do with me working on documents in Microsoft Word.

  Hello

  You can disable the on-screen keyboard of touch using the following steps.

  • Press the Windows key + W to display the Search bar.
  • Services of type and press enter.
  • Scroll to the bottom for the Touch screen keyboard and writing panel service.
  • Right-click on this service and select Properties. Click the drop-down menu in the Startup type section, and then select Manual. In the Service status section, click the stop button.
  • Click Apply/OK.

  Concerning

• Turn off the screen during execution of operating system

  Hello
  Is there a way to disable the display of a Toshiba L300 19 f while the system works (plays music for example)...?

  Thank you.

  Of course you can do it.

  I do not know what power profile that you use, but if you use the balanced power plan type parameters and sets Turn off the option to display for 1 minute.
  I do the same when the laptop is running and when I want to listen to my favorite online radio station. I put it at 1 minute.

• How to turn off the LCD on Satellite L655-1JV?

  Hello!

  I have a * Toshiba Satellite L655-1jJV * and I would like to know how I can * turn off the LCD screen *. I tried to use the F5 key, but it does not give me the option to change (always the LCD on except if I connect an external monitor.)
  Of course, I mean, turn off the lcd screen so that, for example, I rose from the monitor, and I'm listening to music...

  I'm really looking for the answer!

  In s manuals document is clearly described when you use the FN + F5 key combination and has nothing to do with it turn off the LCD screen.

  If you need not display and it should be OFF while you listen to music please change the display settings in power options. In the power settings, there is option turn off the screen. Set it to 1 minute and everything will be OK.