Tuxedo - TMJAVASVR: Informix Datasource

Similar Questions

• Mix of Java and C on the same server of 12.5 Tuxedo?

  I run an application big Tuxedo who perform a mix of Cobol and C calling each other in the same service.

  Is it possible that I have will convert the Cobol in Java code, so I'll have a mix of C and Java on the same single server?

  Or does the Java Tuxedo should only include Java in a single server

  Hello

  Within the server Java Tuxedo (TMJAVASVR) that the Java code is supported.  If a single server can support native languages as C and COBOL or Java, but not the two together in a single server.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

  PS there is no 12.5 Tuxedo don't release 12.1.1, alone and 12.1.3.

• TUXEDO C server using Oracle 11 g ProC receives ORA-01012 not connected by mistake on EXEC SQL PREPARE

  Porting of some former service C code for TUXEDO that used Informix to Oracle... a trial.

  Service logic uses dynamic SQL to SQL and pre-compiler instructions to then run the

  Statement and return to the client in the form of an XML doc.

  Port is done now and during the test initial (after you have configured the TUXCONFIG, environment, Oracle DB, etc) am receiving an Oracle ORA-01012 not connected when the TUXEDO service routine tries to prepare the SQL SELECT statement.

  The statement in question is a simple "SELECT * FROM EMP".

  The server is defined in a group belonging to a group that has an OPENINFO string that connects to the Oracle DB.  This seems to be the case I see the sqlplus using the view v$ session where the user sessions connect when servers of launch.

  No idea why the EXEC SQL PREPARE is causing the server to disconnect from the DB?

  THX.

  W. MacKenzie

  It was with the inclusion of the DB = orcl tag in my OPENINFO in the TUXCONFIG.  Remove that and specify the database instance in the envfile for the configuration.  Works now.

• Change by the Step.Datasource program

  I create a LabVIEW tool to update multiple properties of the stage after that some necessary changes.

  One of the changes has been a step type went a numerical limit to a Boolean success/failure test.

  Because I couldn't have all sequences (several hundreds) customers loaded when I made the changes, I need the tool to change the Data Source for this type of stage of 'Step.Result.Numeric' to 'Step.Result.PassFail '. Problem is that I can't find the right combination of properties/methods to get there.

  I don't see that a "Step.DataSource" property as it is for the "StatusExpression" and "precondition". I tried to take the "AsPropertyObject" of ref in step ref, then using the value 'Setp.DataSource' 'Step.Result.PassFail' 'SetValString' method, but it returns an error of-17306 which returns "access error to the point"Step.DataSource".»

  Thank you

  Ed

  Ed,

  Since you're already in a context of step at this point, with the "Step.AsPropertyObject ()" call, try to just 'DataSource' as string search, rather than Step.DataSource. According to me, who is accessing the correct property in the container of the step.

• Impossible to get Graph.DataSource to work in WPF, I (thread question?)

  My chart is work beautifly when I use:

  chartCollection.Append (measure. GHz, measurement.dB);

  But when I try to use this call to the same method, I get nothing on the graph:

  Double data = new double [256];
  
  ....
  
  Graph DataSource = data;

  I know not if there is a suspicion, but I declare chartCollection on the main thread, and then pass it on to a different thread to collect data and it draw in real time.

  I could have lived with chartCollection.Append but in this case, I got a lot of data instanteneusly and I want to assign to chart at a time.

  Moreover, it seems that you need about 350 ms differ between each card. Add to not cause exception... but in my case I need to delay in all cases (for data) is not a problem.

  Thank you!

  I'm not very clear on how you mix the table/matrix updates. Here is an example of chart queue adds via the dispatcher (using a class task and assistance as a quick way to simulate the substantive work). You can use any delegate with the dispatcher, so you can assign DataSource in a delegate instead of use the method append on a collection of table.

  public partial class MainWindow : Window {
        private readonly ChartCollection chart = new ChartCollection( );

  public MainWindow( ) {
            InitializeComponent( );

  this.graph.DataSource = chart;

  var worker = new Worker( this.Dispatcher, chart.Append );
            Task.Factory.StartNew( worker.DoWork );
        }

  private class Worker {
            private readonly Dispatcher dispatcher;
            private readonly Action append;

  public Worker( Dispatcher dispatcher, Action append ) {
                this.dispatcher = dispatcher;
                this.append = append;
            }

  public void DoWork( ) {
                for( int i = 0; i <= 360;="" ++i="" )="">
                    double value = Math.Sin( i * Math.PI / 180 );
                    this.dispatcher.BeginInvoke( this.append, i, value );
                    Thread.Sleep( 100 );
                }
            }
        }
    }

• DataSource is not refresh a runtime

  Hello

  When I load a page for the first time, it loads all the perfect data. But the data source is not refresh the data when executing, how to refresh listview when I load a page, then by restarting each time the application of others.

  I used the code below, but does not during execution.

    onCreationCompleted: {
          dataSource.load();
  }
  

  you decide when it is refreshed... onCreationCompleted is called only when the page is created, which can be the case every time (for example where the Prosecutor tabbedpanne).

  so, as a method of inrush current in the case of signals:

  onTriggered

  onTopChanged

  onClick

• Child parsing JSON with datasource and view in listview

  Hi, I use datasource to get json from url data and I want in the listview, but json data have child, so I don't know how to access.

  My data source code here:

  DataSource {
          id: serviceDataSource
          source: "http://services.okezone.com/json/headline"
          type: DataSourceType.Json
          onDataLoaded: {
              serviceDataModel.clear();
              serviceDataModel.insertList(data)
          }
      }
  

  And here my display list code:

  ListView {
            dataModel: serviceDataModel
            listItemComponents: [
  
                 ListItemComponent {
                        type: "news"
                        ServiceDetail {
                               title: ListItemData.title
                               pubDate: ListItemData.published
                        }
                 }
            ]
   }
  

  And here is the response from json to this url:

  [
  
  {
  
    "okezone": {
  
       "version": "0.1",
  
       "headline": {
  
          "request": {
  
             "channel": 0,
  
             "start": 0
  
          },
  
          "status": "OK",
  
          "more": {
  
             "offset": 2,
  
             "start": 0,
  
             "total": 2
  
          },
  
          "news": {
  
             "type": "2",
  
             "id": "796135",
  
             "channel": {
  
                "id": "519",
  
                "label": "Surabaya"
  
             },
  
             "published": "2013-04-23 13:21:25",
  
             "title": "Gara-Gara UN, Mendikbud Didesak Mundur",
  
             "summary": "Para orangtua murid menilai, Mendikbud, Muhammad Nuh, harus bertanggung jawab di balik kesemerawutan sistem dan pelaksanaan Ujian Nasional.",
  
             "thumbnail": "http://img.okeinfo.net/images-data/content/2013/04/23/519/796135/BkuPxui4gB.jpg",
  
             "url": "http://services.okezone.com/json/detail/2013/04/23/519/796135"
  
          }
  
       }
  
    }
  
  }
  ]
  

  Thanks for your help, I do it in two days and does not work.

  Hello

  Try this code

  import bb.cascades 1.0
  import bb.data 1.0
  
  Page {
      content: Container {
          Label {
              text: "List View with json parsing"
          }
  
          ListView {
              id: listViewDemo
              dataModel: GroupDataModel {
                  grouping: ItemGrouping.None
              }
  
              listItemComponents: [
                  ListItemComponent {
                      type: "listItem"
                      StandardListItem {
                          title: ListItemData.okezone.headline.news["title"]
                      }
                  }
              ]
  
              function itemType(data, indexPath) {
                  return "listItem";
              }
          }
      }
  
      attachedObjects: [
          DataSource {
              id: serviceDataSource
              source: "http://services.okezone.com/json/headline"
              type: DataSourceType.Json
              onDataLoaded: {
                  listViewDemo.dataModel.clear();
                  listViewDemo.dataModel.insertList(data)
              }
          }
      ]
  
      onCreationCompleted: {
          serviceDataSource.load();
      }
  }
  

  Don't forget to add the library to .pro file

  LIBS +=-lbbdata

  

• Grouping data via GroupDataModel and DataSource

  Hello

  I'm loading below via a data source, the data correctly loads the XML data structure and the data are displayed in the ListView.

  
    
    
      
        
          3
            4.28
            
              375802
              Civic
              
                589
                Honda
              
            
            
              375803
              Accord
              
                590
                Honda
              
            
            
              375804
              Camry
              
                591
                Toyota
              
            
          
      
    
  
  

  The GroupDataModel & DataSource is set as shown below...

      attachedObjects: [
  
          GroupDataModel
          {
              id: dataModel
  
              // This works and the header is displayed properly by rating
              //sortingKeys: ["rating"] 
  
              // Sorting does not work, and listview header is displayed @ top with empty data
              sortingKeys: ["manufacturer.name"]
              sortedAscending: true
              grouping: ItemGrouping.ByFullValue
          },
  
          DataSource
          {
              id: dataSource
  
              // Load the XML data from a remote data source
              source: "http://www.mydataservice.com/getdata.php"
              query: "/dataresponse/search/results/cars"
              type: DataSourceType.Xml
  
              onDataLoaded:
              {
                  // After the data is loaded, clear any existing items in the data
                  // model and populate it with the new data
                  dataModel.clear();
                  dataModel.insertList(data)
              }
          }
      ]
  

  The listview is defined per below...

  ListView
  {
     id: myListView
     // Associate the list view with the data model that's defined in the
     // attachedObjects list
     dataModel: dataModel
  
     // Sticky header
     layout: StackListLayout { headerMode: ListHeaderMode.Sticky }
  
     listItemComponents: [
  
       ListItemComponent
       {
          type: "item"
  
          // Use a standard list item to display the data in the data
          // model
          StandardListItem
          {
              imageSpaceReserved: false;
              title: ListItemData.car.model
              description: ListItemData.manufacturer.name  + " ID: " + ListItemData.manufacturer.id
          }
       }
     ]
  }
  

  So, in order to be able to group the data by the automaker, I thought that I could just specify the following sort key sortingKeys: ["manufacturer.name"] but it does not work.

  Any suggestions?

  Hi joelajean,

  According to the documentation on this link "In a GroupDataModel, there are only two levels of items". Looking at how your xml file is formatted, I can see that the manufacturer.name is a level deeper than the second level and this is probably why you can not retrieve the item. I suggest that you try to use a XmlDataModel instead of a GroupDataModel or analyze your file xml in two levels of items.

• Remote datasource XLM disorder

  I'm having trouble getting and work of listview XML datasource.  He works for a local file, I've hardcoded from the results of the same link.  Can we see something wrong with this code (maybe the URL).   Thank you.

  /* Copyright (c) 2012 Research In Motion Limited.
   *
   * Licensed under the Apache License, Version 2.0 (the "License");
   * you may not use this file except in compliance with the License.
   * You may obtain a copy of the License at
   *
   * http://www.apache.org/licenses/LICENSE-2.0
   *
   * Unless required by applicable law or agreed to in writing, software
   * distributed under the License is distributed on an "AS IS" BASIS,
   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   * See the License for the specific language governing permissions and
   * limitations under the License.
   */
  
  import bb.cascades 1.0
  import bb.data 1.0
  
  Page {
      //! [0]
      property variant session
      //! [0]
      content: ListView {
          id: myListView
  
          // Associate the list view with the data model that's defined in the
          // attachedObjects list
          dataModel: dataModel
  
          listItemComponents: [
              ListItemComponent {
                  type: "item"
  
                  // Use a standard list item to display the data in the data
                  // model
                  StandardListItem {
  
                      title: ListItemData.name
                     description: ""
                  }
              }
          ]
      }
  
      attachedObjects: [
          GroupDataModel {
              id: dataModel
  
          },
          DataSource {
              id: dataSource
  
              // Load the XML data from a remote data source, specifying that the
              // "item" data items should be loaded
             source: "https://maps.googleapis.com/maps/api/place/nearbysearch/xml?location=45.448029,-73.854132&radius=50&..."
              query: "/PlaceSearchResponse/result"
           //   source: "test.xml"
              type: DataSourceType.Xml
  
              onDataLoaded: {
                  // After the data is loaded, clear any existing items in the data
                  // model and populate it with the new data
                  dataModel.clear();
                  dataModel.insertList(data)
              }
          }
      ]
  
      onCreationCompleted: {
          // When the top-level Page is created, direct the data source to start
          // loading data
          dataSource.load();
      }
  
      //! [4]
      paneProperties: NavigationPaneProperties {
          backButton: ActionItem {
              title: qsTr("Back")
              onTriggered: {
                  navigationPane.pop()
              }
          }
      }
  
      //! [4]
  }
  

  I finally found the answer.  I had the feeling that there is something to the fact that my HTTPS URL.   For HTTPS, you MUST add this property to the data source:

  distance: true

  Unfortunately, the system will know it's remote only if your url is HTTP.

• DataSource can be something unknown or custom. Its properties are not validated.

  Hello

  I found what looked like what I tried to do... data sources of QML.

  So I find this documentation: https://developer.blackberry.com/cascades/documentation/device_platform/data_access/using_data_sourc...

  I followed him all the way. But when I run my application, I get my app but no list in it. The background is white. All my items tabs and actions show. Than no list!

  DataSource {
                              id: dataSource
                              source: "assets/countries.json"
                              remote: false
                              onDataLoaded: {
                                  dataModel.insertList(data);
                              }
                          }
  

  There is an 'i' next to the data source implementation in the IDE that says: "DataSource can be something unknown or custom. Its properties are not validated. »

   

  So, what gives, ideas?

  Never mind. I will answer.

  The source must not have the 'active' before the json file. The API reference clearly states: in QML, this path is compared to the document QML in which this data source is declared.

   

  My json file in the current folder, so was not need to prefix it.

• Error in creation of DataSource in Weblogic 11 G

  Hello.

  I recently installed the latest versions of the OSB 11 g and 11g EPCO and due to work, I need to create a data source in my server instance.

  It's whenever I test the connection before completing the process of creating, this error occurs:

  Could not establish a connection because of java.lang.NullPointerException

  at weblogic.jdbc.common.internal.DataSourceUtil.testConnection(DataSourceUtil.java:350)

  at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:734)

  at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:474)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)

  at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)

  at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)

  at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)

  at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)

  at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)

  at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)

  to org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$ 201 (PageFlowRequestProcessor.java:97)

  to org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ ActionRunner.execute (PageFlowRequestProcessor.java:2044)

  to org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$ WrapActionInterceptorChain.continueChain (ActionInterceptors.java:64)

  at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)

  to org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$ WrapActionInterceptorChain.invoke (ActionInterceptors.java:50)

  to org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$ WrapActionInterceptorChain.continueChain (ActionInterceptors.java:58)

  at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)

  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)

  at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)

  at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)

  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)

  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)

  at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)

  at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)

  at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:262)

  at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)

  at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:134)

  at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)

  at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)

  at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)

  at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)

  at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)

  at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)

  at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)

  at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)

  to com.bea.netuix.nf.ControlLifecycle$ 2.visit(ControlLifecycle.java:180)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)

  at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)

  at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)

  at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)

  at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)

  at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)

  at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)

  at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)

  at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)

  at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)

  at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:64)

  at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  
  

  I have no idea as to what makes, because the connection parameters are correct and on another machine with the same configuration, it worked fine.

  I also noticed that if the domain that the server appeared on Eclipse or is linked on Eclipse in any case, this error occurs.
  When is not related to Eclipse, the test connection works very well on the first time, but if I restart the server it stops working.

  
  

  Really, I don't have a clue as to why this happens, because I tried to reinstall the OSB and EPCO several times with the same results. I also thought it might be because I OSB 12 c installed, so I uninstalled both and reinstalled only OSB and EPCO 11 g and it has not worked.

  
  

  In any case, I appreciate the answers that anyone can provide.

  Thank you

  
  

  Gustavo
  

  It was probably a setting in the windows registry or a file preferably in conflict in the region of origin of your user, but it's hard to say without knowing your previous configuration settings and the installation process.

• Tuxedo MQSeries adapter

  Hello

  Someone could you please provide some documents or explain about Tuxedo MQSeries adapter for Tuxedo 12 c?

  TMSNAME = TMS_MQS-> how to build this MSDS and how is it different from other adapters Tuxedo MQ?

  Kind regards

  Thierry P.

  Hi Nadia,

  Sorry for the delay in replying, Oracle OpenWorld was last week.

  I don't know what other MQ adapters you could refer to the Tuxedo has only one.  An entry must be made in the RM file that points to the libraries MQ and XA switch.  Then build you the TMS with buildtms.  All this is described in the documentationof Tuxedo.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• Unable to connect to DataSource

  Hello

  We have configured the extension Oracle EBS with short release 12.1V5 following id oracle 1683053.1 Note

  For some modules, we were able to successfully see data in Oracle EBS.

  For some modules error related to the data source.

  In Oracle short Studio managed server http:// < ENDECA_UI_HOST_NAME >: 7004/short

  Control Panel == > information discovery == > Datasource

  When I click on validate datasource it gives the message "format data source definition is valid but cannot connect."

  Therefore, the data source is in read-only mode. (Please find attached screenshot)

  

  For some modules, I am able to connect to the data source.

  

  Help solve the problem.

  Thank you and best regards,

  Patricia

  Make sure you have a data domain running for each DS indicating the connection failed.

• How to put mod_tuxedo authentication to connect field of Tuxedo?

  Hello

  I'm trying to connect apache with mod_tuxedo to the 12cR2 with USER_AUTH Tuxedo domain. But all http requests does not tpninit error 8 in the apache log and in the journal of smoking are the password application error message.

  When I put no security side tuxedo, http calls are OK.

  Apache has basic auth with the file provider. I tried Smoking tpusr file and the file passwd apache with the same users and passwd - apache authenticate.

  How can I configure apache/mod_tuxedo connect field with USER_AUTH Tuxedo?

  I can't find documentation.

  Apache config - part

  < location ' / CSMW/WS / ">".

  User need valid

  Order allow, deny

  Satisfy all

  AuthType basic

  AuthName "Tuxedo WS.

  AuthBasicProvider file

  # AuthUserFile/srv/app/at1/mw/httpd/conf/passwd/passwords

  AuthUserFile/app/mw/tux/at1/tpusr

  < IfModule mod_tuxedo.c >

  SetHandler Tuxedo-script

  Tuxconfig "/ app/mw/tux/at1/conf/TUXCONFIG.

  TuxService ENTRYSOAP

  < / IfModule >

  < / location >

  Part of Tuxedo config

  * RESOURCES

  IPCKEY 160002

  NETWORKID TuxAT1

  MASTER TuxA, TuxB

  MAXGTT 5000

  MAXACCESSERS 8000

  MAXSERVERS 6000

  MAXSERVICES 14000

  MAXGROUPS 190

  MAXDRT 600

  MAXRFT 4

  MAXRTDATA 2000

  MODEL MP

  LDBAL Y

  PERM 0666

  USER_AUTH SECURITY

  LAN OPTIONS, MIGRATE

  DBBLFAILOVER 2

  
  

  ......

  
  

  
  

  AUTHSVR SRVID = 1000 SRVGRP = MAIN1 SEQUENCE = 95

  
  

  ......

  
  

  DEFAULT: SRVGRP = ESP1 MIN = 6 MAX = 10 CLOPT = "-o /app_log/mw/tux/at1/stdout.entrysoap EI /app_log/mw/tux/at1/stderr.entrysoap s TP_REQ1:SERVER - C conf/middleware.env s ENTRYSOAP" SEQUENCE = 33

  entrysoap = 6800 RQADDR SRVID = SOAPA01

  ......
  

  Apache config

  
  

  
  

  Log Apache

  [Game 28 mai 12:39: 05 2015] [error] mod_tuxedo: don't tpinit/app/mw/tux/at1/conf/TUXCONFIG: 8

  [Game 28 mai 12:40: 11 2015] [error] mod_tuxedo: don't tpinit/app/mw/tux/at1/conf/TUXCONFIG: 8

  [Game 28 mai 12:57: 41 2015] [error] mod_tuxedo: don't tpinit/app/mw/tux/at1/conf/TUXCONFIG: 8

  Journal of smoking

  
  

  125741.ttux1! httpd.5406.896858080.1: LIBTUX_CAT:6244: ERROR: Application password does not match

  125741.ttux1! httpd.5406.896858080.1: LIBTUX_CAT:6247: ERROR: could not establish the security context. Error code 60, minor_status 4294967289

  125741.ttux1! httpd.5406.896858080.1: LIBTUX_CAT:6234: ERROR: authentication fails with error 70

  Kind regards

  Michal Fürst

  Hi Michal,

  It is an ovesight in the implementation of mod_tuxedo.  If you need mod_tuxedo to run a tpinit() with the credentials of the user to a secure USER_AUTH area, please fill out a bug with My Oracle Support.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• How manage the Tuxedo to reconnect to base what database restart or failover to standby dataguard?

  Hi expert,

  My Tuxedo apps using simple to connect to the oracle database, do not use XA.

  All connect and disconnect statements written in code.

  In the situation, when the base data to restart or failover of dataguard standby database. I have to restart all the servers in Tuxedo to reconnect to the Oracle server.

  If I want to reconnect to the database in the application code. I need to know all the exception of disconnection and catch.

  ORA-00028, ORA-03135, ORA-01012 are all oracle error. perhaps than others, no list.

  Do you know how to enumerate all the exception?

  or is there a way to reconnect db connection all servers in tuxedos at the request?

  Thank you in advance,

  Chao

  Hi Chao,

  The answer depends on the platform and version of Tuxedo.  On Oracle Engineered Systems with Tuxedo 12.1.3, you can make use of our new RAC are supported features to handle this in a transparent way, in addition to getting better performance if you use RAC.  New support includes support for FAN so connections can be switched forwards an instance goes down for maintenance.

  For all other environments, I would say looking at TAF (application transparent failover).  TAF should be able to reconnect transparent to another instance or database dataguard.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo