Tuxedo MQSeries adapter

Similar Questions

• Question on how to deploy Oracle Tuxedo JCA adapter

  Hi all:
  I have question on how to deploy the JCA Tuxedo Oracle Weblogic 11g adapter (10.3.3).
  I try to deploy a jar file. But the web application cannot find the JNDI name that defined in the JCA Tuxedo adapter.
  Then I tried to deploy it as a web application. The console can be found this way JNDI name.
  
  However, there was a FAILED Module Exception:
  
  weblogic.application.ModuleException: java.lang.NullPointerException
  at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:239)
  Caused by: java.lang.NullPointerException
  at weblogic.connector.external.impl.RAComplianceChecker.hasMatchingConnFactoryInterfaceInRA(RAComplianceChecker.java:668)
  
  Could someone help me on this issue?
  
  Thanks for any information!
  
  ARO
  Dawn

  Dawn,

  You must use the RAR file. (a file with the extension 'rar' and created using the jar) When you have downloaded Tuxedo of OTN JCA adapter you have is a RAR file.

  After downloading the RAR file to your local workstation, you need to configure, reconditioning and then you can deploy them.

  Use the following to set up procedure and reconditioning
  1 create a sub-diretory called 'adapts' r in the directory where you downloaded the file com.oracle.tuxedo.TuxedoAdapter.rar
  2 cd of ' adapter
  3 unjar the RAR file
  adapter > jar xvf... /com. Oracle.Tuxedo.TuxedoAdapter.rar
  4. to set up
  1. the downloaded file com.oracle.tuxedo.TuxedoAdapter.rar UN - jar
  2. change the configuration
  2.1 if you wish to use the connection configuration factory founded, then change the META-INF/weblogic - RA.Xml
  2.2 If you want to use the domain configuration file, then change the META-INF/ra.xml and then change dmconfig.xml
  NOTE 1: factory based configuration only supported in 11.1.1.2.1
  NOTE 2: the JNDI name is in META-INF/weblogic - RA.xml and you can change to the JNDI name that you like
  5 renovation
  adapter >... jar cvf MyTuxedoAdapter.rar *.

  Now you are ready to deploy JCA Tuxedo adapter
  There are two ways to deploy it to WLS
  1 use the console to configure it as an application
  NOTE: This is the only way that support the main map. Main mapping configuration is necessary for the propagation of security identity of Tuxedo for access control. (you also need to have a copy in the file of Tuxedo TPUSR locally and configured in the configuration)
  2 copy the RAR file into DOMAIN_HOME/autodeploy directory $

  NOTE: you must replace the JATMI that come with WLS and use the one that come with adapter JCA Tuxedo.

  You can also download the sample of RTO and run the example and check the information listed in the file readme.txt and build.xml ANT script and setenv.sh you can find all the information mentioned above.

• MQ adapter and the error queue

  Hello
  
  We have a problem where we had an invalid XML message on a MQ. The problem is that the MQ adapter dead before a process has been created.
  
  This message is now gone. It isn't on the MQ, and it is also not in any BPEL process so it cannot be placed in a hospital error.
  
  Is there some settings on the MQ or on adapter MQ that is needed to move the message to the workflow queue error what entrance to MQ analysis fails? Please notify.
  
  Below is an extract from journal:
  
  < 2010-02-09 13:12:32, 846 > < ERROR > < usu.collaxa.cube.activation > < MQSeries Adapter::Inbound >
  ORABPEL-11211
  
  DOM Exception analysis to the translator.
  DOM parsing exception in incoming XSD translator during the scan of InputStream.
  Check the error stack and correct the cause of the error. Contact oracle support if the error is not repairable.
  
  at oracle.tip.pc.services.translation.xlators.xsd.XSDTranslator.translateFromNative(XSDTranslator.java:202)
  at oracle.tip.adapter.mq.inbound.QueueProcessor.translateMessage(QueueProcessor.java:681)
  at oracle.tip.adapter.mq.inbound.QueueProcessor.processIndividualMessage(QueueProcessor.java:407)
  at oracle.tip.adapter.mq.inbound.QueueProcessor.processMessage(QueueProcessor.java:977)
  at oracle.tip.adapter.mq.inbound.QueueProcessor.run(QueueProcessor.java:181)
  at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
  at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
  at java.lang.Thread.run(Thread.java:595)
  Caused by: oracle.xml.parser.v2.XMLParseException: start of the element root waited.
  at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)
  at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:291)
  at oracle.tip.pc.services.translation.xlators.xsd.XSDTranslator.translateFromNative(XSDTranslator.java:197)

  In this scenario, the input message should have been dismissed. If you are in 10g or 11g? Research of 10g for the "rejectedMessages" at oracle home folder while 11g search for the folder "rejmsgs". You should see the message rejected in there.

  HTH,
  Sandeep

• where we get Networkid, Accepoint on the remote control, local to the tuxedo Server

  Hi xu he
  
  We had the Client Code written in c language, his work when sending messages from Tuxedo
  He was earlier developed by others. Now we must develop with Jca adapter, for those who we need
  Networkid and Accepoint of the remote and the local, please suggest me where I
  Can get this information to the existing code, I got the Tuxedo of the remote computer Server Code and client code to the c language
  
  \tuxedo (main folder)
  -Ben
  -include
  -inventory
  JRE-
  -lib
  -regional settings
  -udataobj
  -uninstaler
  -registry.xml
  -set.env
  
  I need to use these DM_LOCAL_DOMAINS, DM_TDOMAIN, DM_REMOTE_DOMAINS, DM_LOCAL_SERVICES.
  in the configuration of the jca adapter, where can I get this information to the code existed, please suggest me.
  
  Thank you & & best regards
  Olivier

  Hi Olivier,.

  You have described the structure of the directory is the Tuxedo installation directory. What you are looking for is the application directory where are the application configuration files. If the application has already been configured to use the gateway of the field, there will be a file containing configuration areas. If you have configured the environment application (TUXCONFIG, TUXDIR, DMCONFIG, variable of environment, etc.), you can use the dmunloadcf command to get a text representation of the areas configuration copy if you can't find the original source for it. Which will contain all the information of domain configuration you must configure the JCA adapter.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• What is element Tuxedo configuartion file need mention the export

  Please suggest me
  I wrote the sample program using configuation adapter jca in recording what to mention
  According to the doc, the info is
  
  < export name = "TOLOWER_POJO" > < NomDistant > TOLOWER_POJO < / NomDistant >
  session_1 < session_name > < / NomSession > < Type > POJO < / Type >
  com.oracle.tuxedo.test.MyTolower < source > < / Source >
  < SourceLocation > c:\tuxedo\jca\test\myapp.jar < / SourceLocation >
  < / export >
  
  My dmconfig.xml is
  
  <? XML version = "1.0" encoding = "UTF-8"? > < TuxedoConnector >
  < LocalAccessPoint name = "local_1" >
  < AccessPointId > dev_scurtis < / AccessPointId >
  Incase < NetworkAddress > < / NetworkAddress >
  < / LocalAccessPoint >
  < RemoteAccessPoint name = "e1tst_tdtux01" >
  < AccessPointId > e1tst_tdtux01 < / AccessPointId >
  Incase < NetworkAddress > < / NetworkAddress >
  < / RemoteAccessPoint >
  < security > DM_PW < / security >
  < ConnectionPolicy > ON_STARTUP < / ConnectionPolicy >
  < ACLPolicy > Global < / ACLPolicy >
  < CredentialPolicy > Global < / CredentialPolicy >
  < RetryInterval > 100 < / RetryInterval >
  < / SessionProfile >
  < name of session = "session_1" >
  < LocalAccessPointName > local_1 < / LocalAccessPointName >
  < RemoteAccessPointName > e1tst_tdtux01 < / RemoteAccessPointName >
  Profile1 < Nom_de_profil > < / ProfileName >
  < / session >
  < import name = 'TOUPPER' >
  < NomDistant > TOUPPER < / NomDistant >
  session_1 < session_name > < / session_name >
  RoundRobin < LoadBalancing > < / LoadBalancing >
  < / import >
  < import name = "ECHO" >
  < NomDistant > ECHO < / NomDistant >
  session_1 < session_name > < / session_name >
  RoundRobin < LoadBalancing > < / LoadBalancing >
  < / import >
  < / TuxedoConnector >
  
  sholud I add export here if it is obligatory what I sholud I mention is there any need to write to the reading class
  IAM getting no resorce that exception available is reason, which I mention export element strength

  Sorry, we will correct it.

  Any way, I have already sent my sample which includes inbound and outbound, please try it.

  Kind regards
  He Xu

• JMS adapter - it works on the internet

  Hello
  The fact of carrying messages JMS adapter using "HTTP" or "TCP/IP". In other words can produce and consume messages from a source outside the company (local area network) system. He can speak with a supplier on the internet.
  
  Thank you

  It depends on the implementation of JMS from your choice. The JMS adapter uses JMS, JMS is not a product but a standard. There are many implementations. For example, you can use AQ Oracle or IBM MQSeries as the implementation, to name two common possibilities.

  It may be possible to configure the tunneling over HTTP, but by default, most implementations use the native high-performance protocols.

• Need help to find an adapter for a third-party monitor

  Hi all! I find myself in need of a little guidance, and I hope that someone out there will have a quick n easy for me...

  I have a Mid-2011 27 'iMac. which has two ports Thunderbolt It is taken with a Wacom tablet that I use constantly, and the other is made by an external hard drive to a solid state, which has a built-in cable to Thunderbolt (no way to hang it on a different port). I also have a 27 "HP monitor that is currently connected via an HDMI USB adapter.

  The problem is that the HP monitor is actual "jiggy" - the USB does not seem fast enough to deal with requests for the monitor. It is almost unusable. I know I should run it via a HDMI adapter Thunderbolt, but as I have already mentioned the two my Thunderbolt ports are already in use.

  Someone at - it ideas? I need sort of three to two ports Thunderbolt hooks, but I can't seem to find anything for less than $300 that would work. (I am illiterate when it comes to the different cables, adapters, ports, etc., so I hope someone can point me in the right direction by using short words... Most of the products that I travel through list specifications that me Chicane).

  The monitor has two HDMIs and a VGA port, and my iMac has a Firewire 800 port, if that helps at all...

  2011 iMac have only 1 Thunderbolt port and there is no such thing as a Mid-2011, you must have an iMac of year later, if it has 2 ports Thunderbolt. All the 27 "iMacs, from 2012 to 2015 the current have 2 ports Thunderbolt.

• Mac book pro charger adapter

  I have a Macbookpro bought in May 2010 and need a new charger adapter. I need to know what adapter I need. I tried to read the table, but it was only in 2012. If someone knows that it would be useful to feet!

  Find the right adapter cord for your Mac laptop and sector

  https://support.Apple.com/en-us/HT201700

  

• Cable/adapter for use of 2007 iMac as a display for 2009 MacBook Pro

  I would use my older iMac as a monitor for my MacBook Pro. Want to know which cable and/or adapter I need help.

  The iMac is a 24 inch, Intel based since 2007 (6.1). 2 GB, 667 MHZ.  It uses iOS 10.5.8. Its port is a Mini-DVI video output.

  The MacBook Pro is a 15-inch (5.4) 2009. 4 GB, 1067 MHZ. It uses iOS 10.11.6. Its port is a Mini display port.

  Popular Wizard. Thank you.

  You must use a wireless or Ethernet connection and configure Virtual Network Computing. A 2007 iMac only supports video-, and cannot function without the standard display cable.

  (145067)

• I get no picture on the TV when using mini ipad with the Digital AV adapter.

  I get a white on my TV screen when I connect my mini ipad digital AV adapter except HDMI 1 showing in the upper left corner of the TV screen. My mini2 ipad works great with the same son and TV.  I tried two ipads with different TV but get the same result. The ipad mini works OK if not connected to the TV. Two minis are working on the same operating system setting.

  The Digital AV adapter can be finnicky.

  Have you tried simply unplug and plug the adapter with the HDMI cable connected with it?

  With the adapter always plugged into your iPad, have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to the dark and restarts with the Apple logo, then release them buttons?

  Good luck!

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Airport express to extend wi - fi using the adapter but NOT extreme airport

  Hello

  I am looking to buy an express airport in order to listen to music through my stereo and also create another network wireless upstairs in my house.

  My question is, I currently have no apple down wireless router and I have connected to a line adapter with an adapter of the power line on the floor. If I connect the airport express base station to the adapter on the floor, I'll be able to create another network on the floor as well as the flow of my music, even if the router that comes from the connection is not apple router?

  Thank you

  Andy

  If the floor of the Airport Express will be connected via the WAN port using a regular power adapter ethernet cable carrier online and will be in Bridged mode, you can create a wireless network to the floor. Not bridged mode, you can see double-NAT issues, which should be avoided.

• I want to iTunes adapter

  I want to iTunes adapter

  I want to itunes adapter

• Check whether or not the magsafe power adapter is authentic

  Hello! I bought some 60 W MagSafe 2 Power adapter MD565CH/A, 85 W MagSafe 2 Power adapter MD506CH/A & 45 W MagSafe 2 Power adapter MD592CH/A but the serial number in each category is same for example there are 10 units for 60 W & all have the same serial number. I have a doubt, be they authentic shape Apple or not. Kindly help.

  You will need to call Apple for confirmation.

• 7 adapter w/lightning iPhone headphones. The caller does not hear me

  When I make calls or receive, the person at the other end of the line can't hear me but I can hear them.

  In this case more than 50% of the time until now, in fact I would say more like 75% so far. Sometimes its fixed by pulling me on the adapter of the lightning and put it back in the phone.

  Today, I put through a few tests in-depth using three different sets of headphones and had the same problem with all of them.

  Anyone else having this problem?

  I'm having the same problem also. Pulling on the adapter of the lightning and reintegrate them into the port seems to solve it, but then happens again next time you receive a call.

  I used two different sets of headphones with the same results.

  The remote control also do not work and can not adjust the volume of the call.

  Assuming that he is part of the issues that have been reported and will be fixed in the next update?