Two different tests running on separate monitors

Similar Questions

• How can I access a repository of two different system work?

  Please let me know how I could access a repository of two different system running studio odi client. I am able to access the master repository, but not the working repository.

  Repositories of work are always associated with a same master repository. If you can access the control, you will be able to access its repositories of work as long as your security config allows for your user. Maybe it's that you set only a connection to the master repository only on your connection customer of Studio profile. Change the connection (from the connection dialog) profile and simply choose the working repository you want to connect.

• a combobox can have two different lists separated by vdivider?

  Hello
  I need a combobox that contains the two types list item. These foods must be in two different lists in a separate ComboBox with vidivider. It is possible.
  Any suggestion or solution can help a lot.
  
  Thank you...

  Still not sure how it should work:

  Is there a relationship between each element on the left and the right?

  The user is able to choose the 2nd item in the list on the left and/or article 4 in the right list? Need more information about the feature you want.

• Two different Skype on both PCs, but on the same calls running account

  Hi all

  So I don't have the means to test this until I actually need.

  But it would be possible to operate two different Skype on both pc but on the same account calls.

  So I am connected with the same account on both pc - A and pc - B. With pc - A I want a video call with person X and pc - B a video call with person Y.

  Is it possible on the same account at the same time? Or should I make an account separate to that?

  Kind regards

  Theoretically, this can be done, but very quickly your account will be reported as abuse the terms of use, and the account can be blocked.

• How do to run two two Renault live different currently running on a computer

  I have two different cDAQ - 9178 chasises connected to my computer. Each cDAQ-9178 has a NI 9205 module, and each NI 9205 module collects data on its own dedicated experience. The experiences are not always running at the same time, so at some point there may be only a single cDAQ on collecting data instead of two. In addition, every experience is a vi different attached to it for the two cDAQs are not running the same vi.

  I would like to know how I could run two separate cDAQ-9178 (which all use another VI) when you are connected to a computer. Thank you for your help.

  Well.   Use of VI a cDAQ, a cDAQ doesn't "work" a VI.

  If each VI uses its own frame, then you should have no problem having 2 VI parallel running or independently each using a cDAQ.

  Each cDAQ will be identified in MAX by one different name, as Dev1 and Dev2 to the other.  Each VI has just need to refer on behalf of cDAQ for it.

• Why the total time required for the test sequence is different during the test runs

  Hello

  -J' have different test resources to test our product which includes engines and the NOR-Box (6351).

  -Number of test files in sequence that are called during the test (ca. 20)

  -The problem is that when I run these test sequence files separate (say only 3 out of 20), total time by these tests are t1, t2 and t3, but when - I left all 20 tests to run without jumping all the time needed by the 3 tests above is t1 + 60 s, t2 + 80 s and t3 + 50sec. Why it is so and how can I avoid this problem.

  -The tests are motors to move, take samples or box then save them on my computer after testing the limits. Since they are time critical, when I do all the running tests in a test go a lot do not PASS. I can't run them separately because it takes more time, more interference by user and also more than one report that is not desired.

  -J' tried unloading after execution steps, but it did not help.

  Kind regards

  RB

  This probably depends on that made your sequence. Have you tried shrink where extra time is being spent? You can time how long different parts of your sequence are following the steps of the expression as follows:

  Locals.StartTime = Seconds()

  Locals.ElapsedTime = Seconds() - Locals.starttime

  You can also watch time module in your reports. There is nothing specific on TestStand that should cause some sort of slow down like this. I recommend trying to figure out where the extra time is being spent. I suspect once you do, the cause will become obvious.

  -Doug

• Pavillion 500 - c60: two different monitors as multiple monitors

  Is it possible to run a two-screen display using two completely different monitors? I'm replacing an antique desk with a 500 - c60 (Win 8.1) Pavilion and also buy a W2371d monitor for the new machine. The old PC use a perfectly good 17 inches Samsung screen, but the former.

  What will happen if I tried to include my old monitor in my new configuration? If I was able to use two monitors, I would of course make the new HP the primary one. Yet, it would be useful to me if I could have the additional area of the former monitor display. However, the screens are not only of different manufacturers - they are of different vintages, different sizes, different standard resolutions. It is even possible to do?

  Hello

  Yes, you can use TWO different monitors as indicated:

  • Chart AMD Radeon HD 8400 (in combination with the processor)

• How can I run two different versions of Firefox, the last does not work with a site important I need to use?

  With the latest version of Firefox, I can't ' fast email ' to my students through the ANGEL of the College System. I had to uninstall and go to an earlier version. I prefer the new rev.

  A way to run two different versions. It doesn't have to be simultaneously. Seems to be a problem on the Mac and my XP systems.

  Thank you
  Kim

  You can install the portable version of Firefox 3.6.x to access Web sites that don't work with Firefox 5 +.

  • http://PortableApps.com/apps/Internet/firefox_portable#legacy
  • http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36

• View two different windows simultaneously with an internal and an external monitor

  Display two different windows on external and internal monitors at the same time?

  Yes, you can.

  When you connect an external monitor, its pixels are added to the screen integrated to create an extended desktop. If you get a double built-in, just disable fill video. The pane organize you allows to place each tiny in the same way screen icons, they are arranged on your bench, and then the mouse moves correctly on the boundary between displays, and you can drag and drop Windows where you want.

  

  .

• It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

  Hi all

  It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

  Or there is another option to use variables separated and shared at the same time for 2 parallel Sockets (ParallelModel.seq).

  Thank you

  Thank you

  I think it's useful!

• Screensavers dual monitor. Display two different screen savers on two monitors.

  I can see two different screensavers on two monitors?

  Hi daveschwab,.

  As far as I know, it is not possible to have two different screensavers on a double configuration monitor.

• Run two different Tunnels GRE on 1: questions

  Hi all

  I'm having a problem of implementation of two tunnels separated running on a sole Discretion; It's possible?

  Would appreciate you advice.

  I am able to ping in the tunnel (120) using the VRF, but as soon as I add 121 tunnel that originated (not using vrf) I can ping in the new tunnel 121 but cannot ping the original tunnel 120

  Context of the installation.

  R1 - Internet - R2

  R1

  !

  IPsec KEY vrf Internet cryptographic keys

  pre-shared key address 0.0.0.0 0.0.0.0 touches

  !

  crypto ISAKMP policy 1

  BA aes

  preshared authentication

  Group 2

  lifetime 28800

  !

  invalid-spi-recovery crypto ISAKMP

  Crypto isakmp ISAKMP profile profile

  door-key KEY IPsec

  identity function address 0.0.0.0 Internet

  !

  Crypto ipsec transform-set aes - esp esp-md5-hmac trans

  transport mode

  !

  Crypto ipsec IPSEC-profile

  86400 seconds, life of security association set

  Set transform-set trans

  PFS group2 Set

  Set isakmp ISAKMP profile

  !

  !

  interface Tunnel120

  VRF forwarding mgmt

  bandwidth 256

  IP 10.169.9.81 255.255.255.252

  IP mtu of 1376

  IP tcp adjust-mss 1360

  source of Loopback810 tunnel

  tunnel destination xxx.xxx.xxx.xxx

  tunnel vrf Internet

  Shared tunnel ipsec IPSEC-profile protection profile

  !

  R2 reflects this config, but as soon as I add tun 121 with the following configuration I get connectivity to the 121

  tunnel of 121 that I configured as follows:

  interface Tunnel121

  IP 10.190.12.249 255.255.255.252

  IP mtu of 1376

  IP tcp adjust-mss 1360

  source of Loopback810 tunnel

  tunnel destination xxx.xxx.xxx.xxx

  tunnel vrf Internet

  Shared tunnel ipsec IPSEC-profile protection profile

  !

  Please advice if I make mistakes?

  Also I would like to know if you need more information on this.

  Thanks in advance,

  No, I mean the following:

  interface Tunnel120

  key to tunnel 120

  interface Tunnel121

  121 tunnel key

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Running a 3rd monitor Radeon 5870

  Afternoon, I am running 2 cinema Display 30 ' on my PowerMac. I upgraded to a Radeon 5870 as it can run 3 monitors... I bought another monitor, plugged into the HDMI connector & 2 only one race at a time? I read online that you need an active HDMI cable to run the 3rd monitor so I tried one and still no results...

  I won't update my operating system, as it is the last system that works for my music production implementation.

  My 3rd monitor is as follows: br1-25um57-p http://www.ebuyer.com/724861-exdisplay-25um57-p-2560-x-1080-ips-21-9-ultrawide-e? gclid = Cj0KEQjwrZ24BRC098fr-OqnuMkBEiQAKQ9lgG6bAQ0jhBCvEsVCNf7PQRUrZ yFLk42D_-xuL1I8f2QaAk_78P8HAQ #fo_c = 951 & fo_k s = ecd6809444dd8e08df43ac5130fcd159 & fo_ = gplauk? mkwid = sWA3N2WiH_dc & pcrid = 51630194939 & pkw = & pmt =

  If the link does not work its:

  • 2560 x 1080 Full HD.

  I hope someone can point me in the right direction! Seems a waste of new graphics card and monitor at the moment...

  Any PowerMac cannot operate Mountion Lion. You can check your model of Mac? I think you have a Mac Pro. There are two optical drive doors?

  

  Although almost identical on the outside, their internal architecture is very different with different methods of troubleshooting. If you have a Mac Pro, we can get you settled in this forum.

• The way of writing to a wireless bridge between two different routers.1:broadband and dir 2:dlink 605 l

  I want to bridge.and wireless I can't do that... Please send me how to write to a wireless bridge between two different routers.

  1:broadband
  and
  2:Dlink dir 605 l,

  Hi Mohammed Ehsan Jourah,.

  Thanks for posting the request in the Microsoft community forums.
  I understand that you need to know how to make a wireless bridge between two different routers

  What version of the operating system is installed on the computer?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  You can try the steps at the bridge between two different routers wireless.
  a. determine the coverage area. When using two or more routers, the coverage area should be divided, and each router should be placed in a central location in each subdivision. If you add a wireless router to an existing network, this may mean moving the first router.
  b. decide which router is the main router. The main router is connected to the Internet, a LAN cable or other networks. It should be as close to the wired network connections or who has the best line of sight to another wireless network. In addition, the main router should be a high range router, allowing large tables of State and more users.
  c. buy a spare antenna, as the antennas that come with most routers do not have very good range. Quality omnidirectional antennas can push the range and signal strength of each of the routers, which, in turn, will reduce the cost by allowing routers less cover more space overall.
  d. deploy the primary router carefully. This router is the most important and requires most of the time of installation and options. Set the WEP (Protocol) encryption Service Set Identifier (SSID) and wireless, set up the Internet connection and test the router with some clients (computers). Once you get the main router deployed, deploy other routers should be easy.
  e. deploy the secondary routers, which must be configured to operate in "mode of transition." Secondary routers should be deployed around the perimeter of a large area or 'hot spots' where users placed - for example, will convene a bench Park or the table.

  Links:
  Create a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-network-bridge

  Add a connection to a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-connection-to-a-network-bridge

  Hope this information helps you. If you need to get help or information with decision-making wireless bridge between two different routers, I'll be happy to help you.

• Whenever the computer is started, two different styles of start menu appear on the screen, divided vertically from left to right.

  Original title: is this monitor or windows?

  This condition began while I was running xp sp 3.

  I worked in google earth at the time.

  I don't remember exactly what happened.

  But now, every time I start windows, two different styles of the start menu

  appear on the screen, divided vertically from left to right.

  The menu on the right can only be extended to about half of the control panel to the left.

  The menu on the left can grow to the right once the right image has been reduced.

  I tried to reset the start menu in the program settings without success.

  Anyone have any ideas?

  I hope that I was clear enough with this info.

  The article you referred to seems to apply to vista and windows 7.

  How ever, before I received your reply I had already solved the problem myself"

  I appreciate the proposed both help Lisa M and Azeez 'n'

  No further assistance is necessary.

  Thanks again.