Two extremes of the airport with different SSID

Similar Questions

• I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

• 'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

  Hello

  I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

  Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

  My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

  Thank you very much.

  My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used.  Once you son upward, LabVIEW must then call Matlab and wait for it to run.  I know from experience, the call of Matlab to run the script is SLOW.  I also recommend to do the math in native LabVIEW.

• How to read the data with different XML schemas within the unique connection?

  • I have Oracle database 11g
  • I access it via JDBC: Slim, version 11.2.0.3, same as xdb.
  • I have several tables, each has an XMLType column, all based on patterns.
  • There are three XML schemas different registered in the DB
  • Maybe I need to read the XML data in multiple tables.
  • If all the XMLTypes have the same XML schema, there is no problem,
  • If patterns are different, the second reading will throw BindXMLException.
  • If I reset the connection between the readings of the XMLType column with different schemas, it works.

  The question is: How can I configure the driver, or the connection to be able to read the data with different XML schemas without resetting the connection (which is expensive).

  Code to get data from XMLType is the implementation of case study:

   1   ResultSet resultSet = statement.executeQuery( sql ) ; 
   2   String result = null ; 
   3    while(resultSet.next()) { 
   4   SQLXML sqlxml = resultSet.getSQLXML(1) ; 
   5   result = sqlxml.getString() ; 
   6   sqlxml.free(); 
   7   } 
   8   resultSet.close(); 
   9    return result ; 
  

  It turns out, that I needed to serialize the XML on the server and read it as BLOB. Like this:

   1    final Statement statement = connection.createStatement() ;  2    final String sql = String.format("select xmlserialize(content xml_content_column as blob encoding 'UTF-8') from %s where key='%s'", table, key ) ;  3   ResultSet resultSet = statement.executeQuery( sql ) ;  4   String result = null ;  5    while(resultSet.next()) {  6   Blob blob = resultSet.getBlob( 1 );  7   InputStream inputStream = blob.getBinaryStream();  8   result = new Scanner( inputStream ).useDelimiter( "\\A" ).next();  9   inputStream.close(); 10   blob.free(); 11   } 12   resultSet.close(); 13   statement.close(); 14  15   System.out.println( result ); 16    return result ; 17
  

  Then it works. Still, can't get it work with XMLType in resultset. On the customer XML unwrapping explodes trying to pass to another XML schema. JDBC/XDB problem?

• Extreme problem of airport with the guest account

  It drives me crazy! I had the extreme AC router from the airport for a couple of years now. It works perfectly if the guest account is disabled. Whenever I try to enable the guest account access, I have a time very very difficult to connect to this account. The main and guest account are both set to wpa2. When I connect, I get proverbial bells and whistles go telling me airport utility system is set to be implemented via cable wan which decreases the Security (in my own home that is not a problem) and it tells me to put it in bridge not NAT and DHCP mode. If the clipping the guest account value absolutely not allow internet connection. What I am doing wrong?

  The macbook, I am trying to connect is running LION

  What is the brand and model of the modem Internet you have your AirPort Extreme, directly connected by Ethernet?

  If this device is actually a combination modem & router, then your extreme must be configured as a bridge. Guest network does NOT work in Bridge mode.

• How to assign the password for different SSID in embedded AP - w1941 Cisco

  Hello

  Can someone tell me the configuration of the CLI of assinging for SSID password created in cisco integrated access point 1941.

  If so, then can we use WEP encryption on cisco 1941 AP?

  Yet one thing, I get the message click the SSID that "information sent over this network might be visible to others" what does this mean and how to solve this problem. Thank you

  Gotcha!

  The command is...

  encryption [vlan vlan-id] key 1-4 size { 40 | 128 } encryption-key [transmit-key]
  
  We need to map the Vlan for each SSID..
  So the comand will be..
  encryption (vlan vlan#) key 1 size 40bit 7 F3546E765203 transmit-key
  We need to make sure that... under the SSID, we have mapped the coresponding vlan..
  that is.. if you have a SSID by name XYZ and you want the clients to get the IP from vlan 10.. then the config will be..
  en
  
      config t
  
      dot11 ssid XYZ
  
      vlan 10
  
      auth open
  
      mbssid guest-mode
  
      end
  config t
  
      int dot11 0
  
      encryption vlan 10 mode wep mandatory
  
      encryption 10 key 1 size 40bit 7 F3546E765203 transmit-key
  
      no shut
  
      end
  and followed by the subinterface commands.. and the same should be done for all the other SSIDs with different VLAN mappings and keys.
  let me know how this works out for you!!
  Regards
  
      Surendra
  
      

• NATting even address public ip with two periods of internal investigation with different ports

  Hi people,

  Can I use the same public IP for two internal investigation periods different with different ports and I can even user public IP for two periods of different internal investigation with the same ports

  static (inside, outside) tcp 115.248.153.252 192.168.22.19 6303 6303 netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 http 192.168.22.19 http netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 http 192.168.22.20 http netmask 255.255.255.255

  static (inside, outside) 115.248.153.252 tcp https 192.168.22.20 https netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 192.168.22.21 6303 6303 netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 http 192.168.22.22 http netmask 255.255.255.255

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

  No, you cannot use the same public ip address NAT on two internal IP address different using the same port.

  static (inside, outside) tcp 115.248.153.252 192.168.22.19 6303 6303 netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 192.168.22.21 6303 6303 netmask 255.255.255.255

  For the static PAT 2 above for example, when traffic is coming to 115.248.153.252 IDE oucederomsurlesecondport 6303, ASA would not know if NAT it back to 192.168.22.19 or 192.168.22.21, because both use the same port.

• Different users accessing the data with different rights

  Hello
  I just started with Oracle and I don't know if
  This is the right way for what I was intending.
  
  I want to allow access to the data (tables, views,...) to different users with different rights.
  For example a user with select only the rights and another with select and insert rights.
  
  Database Oracle 10 g Express Edition is.
  
  Here are the steps I did:
  
  -This user will be allowed to select only
  create user UserSelectOnly...;
  
  -This user will have select and insert privileges
  create user UserSelectAndInsert...;
  
  -This user only contains data
  create user BaseDB...;
  
  -creation of test in BaseDB data
  create the table tdTest (...);
  
  -definition of role in BaseDB for right to select
  create the role RoleSelectOnly;
  
  -granting SELECT privilege for RoleSelectOnly
  Grant select on tdTest to RoleSelectOnly;
  
  -select grant (role) to the user UserSelectOnly
  grant RoleSelectOnly to UserSelectOnly;
  
  -definition of role in BaseDB to select and insert privileges
  create the role RoleSelectAndInsert;
  
  -grant select and insert privilege for RoleSelectAndInsert
  Grant select, insert on tdTest to RoleSelectAndInsert;
  
  -grant select and insert (role) to the user UserSelectAndInsert
  grant RoleSelectAndInsert to UserSelectAndInsert;
  
  My problem is that the definition of user (BaseDB) works as a database.
  Are there more effective ways in Oracle 10 g Express?
  
  Thank you
  Wilfried

  Hello Wilfried and welcome to the forum.

  First of all, it's a property that you have given time to review the security of the database.

  My immediate comments:

  You have 3 users:

  -This user only contains data
  create user BaseDB...;

  Very well, good thing. Use an administrative account/data owner.
  You might consider locking when you do not have administrative tasks in the schema.

  -This user will be allowed to select only
  create user UserSelectOnly...;

  -This user will have select and insert privileges
  create user UserSelectAndInsert...;

  OK, but no need to take account of their privileges in the names. You could simply call their

  SomeUser
  AnotherUser

  You have two roles

  -definition of role in BaseDB for right to select
  create the role RoleSelectOnly;

  -definition of role in BaseDB to select and insert privileges
  create the role RoleSelectAndInsert;

  Seems ok, it's a good thing here for the description of privileges in the role itself.

  Maybe I would call them something like
  RoleSelect or RoleRead or BaseDBSelectRole
  RoleInsert or RoleWrite or BaseDBUpdateRole

  Should be updated (and DELETE), as well?

  Another approach would be to separate between the tables.

  For a group of tables, select, insert, update, delete are granted to a role.

  For another group of tables, different privileges are granted to another role.

  That is, there is no general answer, correct, it depends on your application.

  Often the roles are used for ease of maintenance. In other words, if you have several users who need
  the same set of privilege, these are maintained by a role.

  Maybe you don't want to use roles, but I like them.
  But attention not only

  Select on all tables to a single role
  Insert on every table to another role
  Update on all tables to a third party role.

  Unless, of course, it gives meaning to your scenario.

  My problem is that the definition of user (BaseDB) works as a database.
  Are there more effective ways in Oracle 10 g Express?

  Not sure what you mean. Schema in Oracle and user are often used for the same thing.

  In your case, BaseDB is the owner of (all) the tables, no problem.
  As mentioned, you might choose to block the account.

  The main thing is, no application, or ad-hoc user should log in as BaseDB

  And the users of your system should be exactly the privileges they need to do their jobs
  nothing more, nothing less.

  Concerning
  Peter

• Click on the boxes with different audio

  Hello!

  I use 5 Cp and I have problems with the audio. Button or box where to click must play an audio short or long after that is clicked on.  In the text, I want to cover some words with boxes click with different sounds, students can click to hear the sounds. in the text, there may be a lot of words I want to cover with boxes to click.  Is it possible to do? If Yes please let me know how.

  Thank you

  Ok.  Who can be a little trickier.  Normally a button or click box has a break point on the timeline and once you click on the object continues to play beyond its break point.  This means that you get only a click... UNLESS... you change the Action when a click to be an advance Action that does two things.  First of all, it does everything you want to take place (for example to read the audio file) and THEN he moves the read head to a point BEFORE the break point so that you get another possibility to click New.

  Blog of Lilybiri has some good examples of this sort of thing: http://lilybiri.posterous.com/

  You may encounter a problem where even after you have everything installed correctly the buttons stop working after a while.  In this case your best recourse would be to use the Widgets event handler instead, these can transform any object into a clickable button screen.  But even better, is that they give you preferences to disable continue and the pass/fail criteria reset after Action so that your users can click on your buttons as often they like to repeat actions, these useful widgets trial versions can be downloaded here.

• Join the Grains with different facts

  Hello
  
  We have a requirement where we have two facts with different grains
  
  DEPT_FACT - contains (Dept_Id, Dept_Name, recipes)
  EMP_FACT - contains (Emp_Id, Dept_Name, Is_Current_Employee)
  
  Some examples of data
  
  DEPT_FACT
  ========
  1 Sales_Dept 100 000
  Manufacturing_Dept 2 200 000
  
  EMP_FACT
  ========
  Sales_Dept 100 Y
  200 Sales_Dept Y
  Sales_Dept 300 N
  Manufacturing_Dept 400 N
  500 Manufacturing_Dept Y
  Manufacturing_Dept 600 N
  
  Our requirement is to create an OBIEE report that shows the * "' recipes / number of current employees in Department BY Department" * "
  
  The above example should demonstrate
  Sales_Dept = > $ 50,000 (100 000 / 2 current employees)
  Sales_Dept = > $ 200,000 (200 000 / 1 current employee)
  
  Any suggestions on how this can be done?

  Hello

  Try this code in your fx

  Recipes/case when current_employee = 'y' then count end (emp_id by department_name)

  Concerning

  NGO

• Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

  Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

  The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

  The site identity button | How | Firefox help

  Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

  Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help

• Officejet 5610 - does not connect to the airport with USB

  You want to enable the printer to be used by all devices on my network. Works fine when USB connected directly to my Mac running OS 10.6.8. When USB connected to the AirPort Extreme wireless router, however, printer is visible on Mac and on my network, but is "offline." Cannot get printer to recognize that it is connected. Downloaded the latest version of the driver. Reset all devices. No luck. Any thoughts?

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• why I can't download sequels? I just got the message '' We will have problems, '' and I just spent two hours on the phone with the India.

  It's been two days now.

  Whenever I try to download After Effects on my 32-bit Windows 10 laptop, the web page says "we are currently experiencing some issues, please try again later." If the problem persists, contact customer service. »

  I just spent 2 hours on the phone with the India tent doesn't solve or none this result.

  The India should you said that After Effects is 64-bit only.

• Combine two results of the query with rank

  Dear all,
  
  I'm an analyst working DB for the first time:
  
  I have two requests:
  1)
  Select * (select 'CAFNo', 'ActionDate', 'ActionDetail', rank() on rnk (partition by order of 'CAFNo' through 'ActionDate'),
  of 'ABC '.
  where 'ActionDetail '.
  as 'FIU successfully presented and routed to the fulfillment team %')
  where rnk = 1
  
  Results in
  CAFNo', 'ActionDate1', 'ActionDetail '.
  
  2)
  Select * (select rank() on rnk (partition by order of "CAFNo" by "ActionDate"), 'CAFNo', 'ActionDate', 'ActionDetail'
  of 'ABC '.
  where 'ActionDetail '.
  like '% customer ID %')
  where rnk = 1
  
  Results in
  CAFNo', 'ActionDate2', 'ActionDetail '.
  ---------------------------------------------------------------------
  I would like to combine the results of two as:
  No College, Actiondate1, actiondate2, ActionDetail
  
  I tried the full outer join and other options but without success. Help, please
  Please share concept to join the two results not the actual query.

  with t as (
             select  "CAFNo",
                     "ActionDate",
                     "ActionDetail",
                     case
                       when "ActionDetail" like '%Customer ID%' then 2
                       else 1
                     end weight,
                     rank() over(
                                 partition by "CAFNo",
                                               case
                                                 when "ActionDetail" like '%Customer ID%' then 2
                                                 else 1
                                               end
                                 order by "ActionDate"
                                ) rnk
               from  "ABC"
               where "ActionDetail" like '%Customer ID%'
                  or "ActionDetail" like 'CRF successfully submitted and routed to Fulfillment Team%'
            )
  select  "CAFNo",
          max(
              case weight
                when 1 then "ActionDate"
              end
             ) "ActionDate1",
          max(
              case weight
                when 2 then "ActionDate"
              end
             ) "ActionDate2",
          max(
              case weight
                when 1 then "ActionDetail"
              end
             ) "ActionDetail1",
          max(
              case weight
                when 2 then "ActionDetail"
              end
             ) "ActionDetail2"
    from  t
    where rnk = 1
    group by "CAFNo"
  /
  

  SY.

• Find the space between the word with different endings and figures

  Hello

  I am trying to find a way to find spaces between the words and numbers.

  

  I'm limited to only use the word "WORD" (capital or small capitals) with different endings like - ing s y and more (using \S+).

  I wrote something like (? i) (? < = WORD\S +) \s(?=\d+) but this does not work due to some limitations of advanced search, I think?

  Any suggestions?

  Peter

  On the other hand, I think that.