Similar Questions

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• Centro does not connect to the synchronization with Windows/Palm HotSync

  My Centro ceased to sync with my Windows XP computer.  It just does not connect.  Did the soft reset, restart windows, etc.  No problem in Device Manager.

  The value of sync with outlook on the exchange server data.

  Same Centro and sync cable fine on the Linux machine using gnome-pilot and lines of development to access the same data exchange.

  Assuming that you can navigate through your windows machine.

  1. open Device Manager
  2. when your device is connected, you will see palm os handheld
  3. click straight and say to uninstall the driver
  4 disconnect your device and soft reset it
  5. reconnect the appliance and leave it to reinstall the driver

  This will force reinstall the driver and also tell us if there are errors with the driver.

  Message relates to: Centro (Sprint)

• View-PCoIP does not connect on the desktop with ViewPlanner, but does not connect manually

  I saw this mentioned in a few subjects, but I've not seen a resolution.

  I configured a remote view-PCoIP see Planner run profile. The customer and and food Office of VMs on. The Office is a newspaper and connect the client starts the view Client PCoIP. It connects on the view connection server, but not on the desktop. The error message is 'office 'Unknown' is not in the list of desktop titled. (see the folder of the image as an attachment).

  I press the OK button on the error message, start the Client view manually, by using the same credentials see Planner in AD, and I am able to connect to connect to the server, then the virtual desktop computer. The job see Planner runs even at this place (if I don't stop to see Planner first).

  Two days ago, that I was able to run a desktop computer without problem running 10 profile. Since then, I've added several hundred offices at the pool, no other configuration change I can think. The pool is an automatic with floating assignments, office computers are supplied with View Composer. The 'Test' AD security group has the right (see image file).

  I don't understand why see Planner cannot connect to a desktop computer, so that I can do it manually.

  I see the same behavior with a single or multiple, virtual machine run profile.

  Here is an extract from the journal of the unit (all IP addresses are on an area of temporary laboratory, so I really don't like if they are exposed).

  Thanks and greetings

  Wednesday, March 26, 2014 23:17:29 DEBUG add users ['Test_1'] for security AD Group: Test
  Wednesday, March 26, 2014 23:17:29 DEBUG all users added to AD security group: Test
  Wednesday, March 26, 2014 23:17:31 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop: 0, Clients: 0] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]
  Wednesday, March 26, 2014 23:18:19 registration of new customer INFORMATION: 10.128.33.73
  Wednesday, March 26, 2014 23:18:19 INFO current registered status machines: [pairs required: 1] [clients: 1] [server: 0]
  Wednesday, March 26, 2014 23:18:20 new INFORMATION server registration: 10.128.33.132
  Wednesday, March 26, 2014 23:18:20 INFO current registered status machines: [pairs required: 1] [clients: 1] [server: 1]
  Wednesday, March 26, 2014 23:18:20 INFO get the IP address Office VM-1 of VC
  Wednesday, March 26, 2014 23:18:21 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop computers: 1, customers: 1] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]
  Wednesday, March 26, 2014 23:18:30 INFO get the IP address VM VC client1
  Wednesday, March 26, 2014 23:18:30 INFO got the client1 virtual machine IP address: 10.128.33.73
  Wednesday, March 26, 2014 23:18:30 INFO get the IP address Office VM-1 of VC
  Wednesday, March 26, 2014 23:18:30 INFO obtained IP address for the virtual office-1 computer: 10.128.33.132
  Wednesday, March 26, 2014 23:18:30 DEBUG IP: 10.128.33.73-> name: client1
  Wednesday, March 26, 2014 23:18:30 DEBUG IP: 10.128.33.132-> name: office-1 computer
  Wednesday, March 26, 2014 23:18:30 INFO query: SELECT * from hostinfo where IPADDR = "10.128.33.132."
  Wednesday, March 26, 2014 23:18:30 INFO Running query: UPDATE SET is_Client = '0' hostinfo, State = 'Unpaired', name = 'computer office-1 "where IPADDR = '10.128.33.132'".
  Wednesday, March 26, 2014 23:18:30 INFO query: SELECT * from hostinfo where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:18:30 INFO Running query: UPDATE SET is_Client = '1' hostinfo, State is 'Unpaired', name = 'client1' where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:18:30 INFO registration remaining VMs
  Wednesday, March 26, 2014 23:18:30 reached the threshold of the INFO for the number of machines... The plan of starting reference...
  Wednesday, March 26, 2014 23:18:30 INFO waiting for virtual machines to settle and sleep during the time scale
  Wednesday, March 26, 2014 23:18:40 DEBUG of waiting for prefixes map to be extracted from Server view...
  Wednesday, March 26, 2014 23:18:41 INFO function call right with arguments: (pools: [], domain name: domaine.net, groupnames: ['Test'])
  Wednesday, March 26, 2014 23:18:41 groups of security of the object DEBUG AD ['Test'] to the office pool
  Wednesday, March 26, 2014 23:19:10 INFO assigning client-server for 1 pair
  Wednesday, March 26, 2014 23:19:10 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:19:10 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = "10.128.33.132."
  Wednesday, March 26, 2014 23:19:10 INFO query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values ('PCoIP-1VM', '10.128.33.73', '10.128.33.132', 'View-PCoIP', 'Test_1', "passw0rd", "waiting", '2014-03-26 23:19:10 ', 2)
  Wednesday, March 26, 2014 23:19:10 request information: SELECT * from testinfo where testname = 'PCoIP-1VM' and test_state = 'pending' and ClientIP_FK = '10.128.33.73' and ServerIP_FK = '10.128.33.132. '
  Wednesday, March 26, 2014 23:19:10 INFO -.
  Wednesday, March 26, 2014 23:19:10 INFO launch the execution plan for the run profile
  Wednesday, March 26, 2014 23:19:10 INFO -.
  Wednesday, March 26, 2014 23:19:10 DEBUG begins to gather statistics periodically VC...
  Wednesday, March 26, 2014 23:19:11 INFO from the workload for all assigned pairs...
  Wednesday, March 26, 2014 23:19:11 INFO remote command running on 10.128.33.132 machine: Logoff
  Wednesday, March 26, 2014 23:19:11 command run on the remote computer INFO: Logoff
  Wednesday, March 26, 2014 23:19:11 INFO wait until all desktop computers have disconnected
  Wednesday, March 26, 2014 23:19:21 INFO continues the race after waiting
  Wednesday, March 26, 2014 23:19:21 INFO looking for name of the cluster for computer office-1
  Wednesday, March 26, 2014 23:19:21 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:19:21 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.128.33.132."
  Wednesday, March 26, 2014 23:19:21 request information: UPDATE SET = '1VM-PCoIP' test_name testinfo, Protocol is 'View-PCoIP', name of user = 'Test_1', password = 'Q1w2e3r4!', test_state = 'Running', start_time = "2014-03-26 23:19:11" where test_id = 2837
  Wednesday, March 26, 2014 23:19:21 INFO running commands remotely with args: customer: 10.128.33.73, server: 10.128.216.88, Protocol: view-PCoIP, test_name: PCoIP-1VM, vmuser: Test_1, vmpasswd: Q1w2e3r4!, workprofile: {'IEbpm': 1 L, 'ARbpm': 1 L, "Thinktime": 2 L, "name": "StandardBenchmarkProfile_1i", "hosttime": 1, "random": 1, "iterations": 1 L, 'OMP': 60 L, 'video': 2 L, 'applist': ' WORD, ACROBAT, IE_APACHEDOC, EXCEL_SORT, 7ZIP} {, PPT, FIREFOX, OUTLOOK, IE_WEBALBUM, VIDEO '}, poolname: unknown, domain name: TMIOCONTROL
  Wednesday, March 26, 2014 23:19:21 INFO by adding the callback function for the remote root object to ipaddr: 10.128.33.73
  Wednesday, March 26, 2014 23:19:21 INFO added reminder for the command startWorkload on the client 10.128.33.73
  Wednesday, March 26, 2014 23:21:02 INFO connection started from the client: 10.128.33.73

  I think the name conventions 'computer of office-{n}' and Office-{n}"may be causing the problem. Can you try just to office-{n} and go to View server, open a command prompt and then run "python c:\listener.pyc" and after the release?

• OfficeJet 4500 does not connect to the network

  My officejet 4500 works perfectly until I have change the wireless network modem. USB connection is fine. Windows 7.  When I reinstall I don't get the option of wireless connection.

  Hi dperk8,

  Check out the video below to connect the printer to your network by using the control panel.

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• iPad does not connect to the server

  Kind of, it looks like my iPad has disappeared and twisted his tail (connection) and got lost somewhere in cyberspace.

  Yesterday morning he opens to the screen Hello > Slide Set up who brought up the screen 'could not activate iPad' with the message "your iPad could not be activated because the activation server is not reachable. Try to connect the iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support".

  This condition actually began three days when it does not connect to my Airport wireless internet and I could not he deleted.  I made the troubleshooting on the dome using Airport utility that showed connections to the top and the green. My main computer is not affected. I was able to put a return by making a total system power off for a few minutes and then turned on one at a time with the modem (cable) beginning (all equipment - computers, iPad, modem and airport), then the airport, my main computer (2003 iMac screen all-in-one flat) then the dome of the iMac. They are all restored correctly at full speed. At the point where I was interested only in the dome as I was doing some work on it using Classic applications and did not activate the iPad until the most late in the evening.

  I was wondering what is happening and if there is an inexpensive way to get it running again?

  Sparkgapper

  p.s. There is an Apple Store here in El Paso, if it's a long drive where I live.

  If you have problems with the applications of stalling or crashing,

  double click on the "home" button

  -slide up on applications to force leave their

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• My UK 6s iPhone does not connect to the network in Germany?

  My UK 6s iPhone does not connect to the network in Germany?

  'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well

• Thunderbird does not connect to the server after update to 24.4. How can I fix it?

  TBird updated today V24.4 on my desktop and now it does not connect to the server. I have V23.4 on my lap top and it works fine. Someone at - he had this problem and figured out how to fix it?

  Please check your anti-virus software.
  He may have detected a change and decided to not allow Thunderbird. He could therefore block Thunderbird.

• Pavilion HPE-414sc: HP Support Assistant does not connect to the HP Server

  HP Support Assistant does not connect to the HP Server. Do not download messages and updates of definition. Does not collect configuration information. Does not scan my system. Does not prepare the action list.

  I installed Windows 10 once again. After installing HP Support Assistant work.

• I worked on the Web site of our Church and all of a sudden my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]

• 15 - r074TU: laptop does not connect to the router

  Day sum... .my laptop (model No. 15r074TU) with window 8.1 does not connect to the router that is D-link

  I uninstalled my driver reinstalled again, but it didn't work... even if I formatted my laptop, reconfigure the router and... done with all possible measures to overcome this problem, but have ultimately failed. Please suggest ways to tackle this problem as soon as possible...

  Follow the wizards in the following forum sticky and troubleshooting.

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/common-fixes-for-wireless-connectivity-issues/m-p/4831601#M86871

• Satellite L350 does not connect to the internet, network adapter yellow exclamation

  Trying to help my Nan with his laptop...
  Model is Satellite L350-170

  Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

  She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

  All the drivers can be downloaded from the Toshiba UE driver page.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
  Then, you will get the list of drivers.

  If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

  You asked how to remove the network card?
  Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
  Click the single LED adapter, and then press or click on uninstall button driver