Two FWs
Cisco ASA 5510. External NIC connected to ISP with real internet IP
addresses. Inside of the NETWORK adapter connected to the DMZ 172.17.193.0/24 with address
172.17.193.100.
Brand new clean ISA 2006 SP1. External NIC connected to 172.17.193.0/24
DMZ with the address 172.17.193.1. Inside of the NETWORK adapter connected to the UAT
44.44.44.0/24 with the address 44.44.44.109.
The VPN user connects to the ASA (Gets an IP from 192.168.20.0/24). On
the ASA, there are:
standard access list split_tunnel_list allow 44.44.44.0 255.255.255.0
Route inside 44.44.44.0 255.255.255.0 172.17.193.1 1
What I have now on ISA FW policy:
1 allow, RDP, external to internal and Local host
2. allow all outgoing traffic, Interior and Local host, to external
44.44.44.x can browse the Internet? N °
VPN Clients DRC 44.44.44.x peripheral does Yes.
Then the DRC 44.44.44.109 VPN Clients (ISA)? Yes.
44.44.44.x peripheral 172.17.193.x DRC does N °
Anyone know if there is anything I do on the SAA changes to ensure that all questions are YES?
you have the nat to the asa as
NAT (inside) 1 0 0
Global 1 interface (outside)
This is for the hosts to access internal internet
Tags: Cisco Security
Similar Questions
-
Help to combine the two queries with dependencies
Combining two queries with dependencies:First ask: Returns USER_ID that has a type of access to a table with the OWNER (I also shoot the TLA of the USER_ID standard: ' of TLA #)Select distinct SUBSTR (DBA_USERS. Username, 2, 3) AS TLA
DBA_USERS. Username USED_ID
DBA_TAB_PRIVS. Owner OWNER
from DBA_USERS
DBA_ROLE_PRIVS
DBA_TAB_PRIVS
where DBA_USERS. Username = DBA_ROLE_PRIVS. Dealer
and DBA_USERS.default_tablespace not in ('SYSTEM', "SYSAUX")
and DBA_USERS. Username like would be %'
and DBA_ROLE_PRIVS. Granted_role = DBA_TAB_PRIVS. Dealer
and SUBSTR (DBA_USERS. Username, 2, 3) <>DBA_TAB_PRIVS. Owner
;
Example of results (red font used in the last citation):TLA USED_ID OWNER
--- ------------------------------ ------------------------------
DGTX999 GTX GRR
DGTX999 GTX ABG
DGTX999 GTX HTC
FWS DFWS999 GRR
OCN DOCN999 GRR
RHR DRHR999 DAS
ETM DETM999 DAS
FWS DFWS995 DAS
CD DCDS999 DAS
ABE DABE999 DAS
Second request: matches the USER name (same standards as above) and MACHINES (filter PC connections) and the number of connections made ofSelect DBA_USERS. Username
DBA_HIST_ACTIVE_SESS_HISTORY. Machine
COUNT (*) AS CONN_COUNT
of DBA_HIST_ACTIVE_SESS_HISTORY
DBA_USERS
where DBA_HIST_ACTIVE_SESS_HISTORY. User_id = DBA_USERS. User_id
and DBA_USERS. Username like would be %'
and DBA_HIST_ACTIVE_SESS_HISTORY. Machine not as "WINAD%\%-%".
Group of DBA_USERS. Username
DBA_HIST_ACTIVE_SESS_HISTORY. Machine
order by 1
3 desc;
Example of results (red font used in the last citation):MACHINE CONN_COUNT USERNAME
--------------- ------------------------- ----------
DFWS999 home13e0 7557
DGAM800 vu1246 37
DGAM999 vu1246 2558
DABE999 back18cb 4639
DINL888 home162f 84
DFWS999 WINDAD\OMHQ58BF 178
DCDS999 back18cb 788
DGTX999 home18c8 7
DGTX999 home13d3 62
DOCN999 vu1261 44
DFWS999 back1976 3
DCDS999 home18c8 173
DGTX999 home19c9 13
What I'd like to have (just made two first USER_IDs from the first query) (COL duplicated for each separate owner 1-4). So 3 machines and 3 owners would result in 9 lines (I could reorganize the collar and use a 'pause'):
TLA USED_ID MACHINE CONN_COUNT OWNER
--- ------------------------------ ------------------------- ---------- ------------------------------
GTX DGTX999 home13d3 62 GRR
Home18c8 GTX DGTX999 7 GRR
DGTX999 GTX home19c9 GRR 6
GTX DGTX999 home13d3 62 ABG
DGTX999 GTX home18c8 ABG 7
DGTX999 GTX home19c9 6 GBS
GTX DGTX999 home13d3 62 CTH
DGTX999 GTX HTC 7 home18c8
DGTX999 GTX home19c9 6 HTC
FWS DFWS999 home13e0 7557 GRR
FWS DFWS999 WINDAD\OMHQ58BF 178 GRR
FWS DFWS999 back1976 GRR 3
So it would be logically read: TLA as USER_ID of MACHINE, CONN_COUNT consultation times: OWNER information.Thought as only those with the necessary values. Just try this and let me know in the case of all conflicts in the output.
WITH T1 AS)
Select distinct SUBSTR (DBA_USERS. Username, 2, 3) AS TLA
DBA_USERS. Username USED_ID
DBA_TAB_PRIVS. Owner OWNER
ROWNUM RN
from DBA_USERS
DBA_ROLE_PRIVS
DBA_TAB_PRIVS
where DBA_USERS. Username = DBA_ROLE_PRIVS. Dealer
and DBA_USERS.default_tablespace not in ('SYSTEM', "SYSAUX")
and DBA_USERS. Username like would be %'
and DBA_ROLE_PRIVS. Granted_role = DBA_TAB_PRIVS. Dealer
and SUBSTR (DBA_USERS. Username, 2, 3) <> DBA_TAB_PRIVS. Owner),
() AS T2
Select DBA_USERS. Username
DBA_HIST_ACTIVE_SESS_HISTORY. Machine
COUNT (*) AS CONN_COUNT
of DBA_HIST_ACTIVE_SESS_HISTORY
DBA_USERS
where DBA_HIST_ACTIVE_SESS_HISTORY. User_id = DBA_USERS. User_id
and DBA_USERS. Username like would be %'
and DBA_HIST_ACTIVE_SESS_HISTORY. Machine not as "WINAD%\%-%".
Group of DBA_USERS. Username
DBA_HIST_ACTIVE_SESS_HISTORY. Machine
order by 1
3 desc)
SELECT T1. TLA
, T1. USED_ID
, T2. MACHINE
, T2. CONN_COUNT
, T1. OWNER
FROM T1
T2
WHERE T1. USED_ID = T2. USER NAME;
-
Hi all
I have two computers, a MacBook Pro and iMac. I use the new feature for Sierra macOS, which allows me to continually synchronize my office on iCloud. I welcome the Office on my iMac be synchronized on the cloud. Now, I would have the exact same office on my MacBook Pro. I tried many ways, including by dragging files to iCloud Drive on my desktop, but the synchronization does not work. If I enable syncing on my MacBook Pro, I know that I have duplicate files.
With this method, I would like to: whenever I have add a file on my desktop iMac computer, it shows up on my MacBook Pro Office without the need for me to keep about iCloud road opening.
Thanks for reading this.
Ethan
If you enable sync on the MacBook Pro, it should not be duplicates. What makes you think it?
-
Number of matches between two columns
Column1 Column2 5 5 5 2 5 5 4 3 4 4 Football match 3 I basically you want to compare two columns and count matches in the corresponding lines. I tried using the following formula:
SUMPRODUCT (--($column1=$column2))
... but it doesn't work! Any suggestion?
Tiago,
It seems you are trying to use array formulas (maybe since excel?) who do not work in number.
Here's how I would solve this problem:
Make sure that the table where data is named 'Data' (as shown, or change the table name references to match your table name)
Add a new column (C)
C2 = AND (A2 = B2, A2≠ "")
It's shorthand dethrone select cell C2, then type (or copy and paste it here) the formula:
= AND(A2=B2, A2≠"")
Select cell C2, copy
Select cells C2 at the end of the C column, paste
the formula say to check to see if the cell in column A is NOT empty, and is equal to the cel in column B
Now in the summary table (single cell table):
A1 = COUNTIF (Data::C, TRUE)
-
How can I share contacts and calendars between two Apple ID? Also my wife and share our music iTunes between our IDs?
See the following topics:
-
Backup of two mac mini hard drives
I have a Mac Mini 2011 with two 500 GB hard drives. I have apps and General things about hard drive #1 and #2 only has pictures and videos. Will be Time Machine backs up both drives to my external hard drive as one or two separate back ups? I see files of backup HD #1, but not sure if the HD #2 files are also there. I can't find an answer in the support documents. Ideas?
Open the Time Machine system preferences pane, click Options, and check if the disks are in the exclusion list.
(145146)
-
Conditional highlighting with checkbox in the two cells by the numbers
I have two columns.
Check boxes, the other contains text.
I want to apply formatting conditional for text, based on the checkbox (true/false) value.
Hi Bebaj,
Add another column (C in this example). You can hide C when everything works.
Formula in C2 (fill down)
= IF(A2,B2,"")
A tick in a check box inserts the value of B in C, another "" (NULL)
Conditional highlighting in column B
Kind regards
Ian.
-
Phone verification (two-factor authentication) on Sierra is not available in Bangladesh
I upgraded to El Capitan in macOS Sierra today. But when I tried to set up two mobile verification or authentication my country (Bangladesh) was not listed there. I was wondering why this service is not available here in Bangladesh? Please give me a solution for telephone based it services.
If it is not supported in your country, then I'm afraid you're out of luck. As to why, you have to ask Apple https://getsupport.apple.com/ instead we support single users in these Community Forums.
-
Does anyone know how to merge two workseets number for printing?
How can I combine two spreadsheets in numbers for printing?
Hi jj,
I assume that you mean that you have a single document, which contains two worksheets, and that each sheet contains one table (only?).
What do you mean by "merge two (booklets)?
You mean you wan to place Tables of two leaves on a single sheet (this sheet would contain then both tables).
Or do you mean you want to place all data on the two tables into a single table on one sheet?
Or do you mean something different to both of these descriptions?
Kind regards
Barry
-
After you have installed windows on my Macbook Pro 13 "2015, installing bootcamp is not delete my iso installation of windows partition drive.
When I press 'option' to choose which partition to start in the start menu, there is a Macintosh disk which is my os x and partition of two windows.
The first is the windows operating system and the other opens just the installation.
How can I remove the installation partition and give space on the windows partition?
Thank you!
Also, when installing windows 10, I pressed accidentally the "option" key after the installation finishes (it goes then to the start menu) and then I select the windows partition to boot windows. I don't know if that will cause a problem like that or not.
Problem solved,
After the start under os x, the installation of windows partition is removed.
-
My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.
Time Machine backup to a sparsebundle.
The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.
Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...
You has of course set the exclusion in Time Machine?
By default, Time Machine will exclude your second drive unless you have included it. Did you?
Once you get to this level during the backup, you can do a full restore manually whenever you want.
-
On my iMac after Sierra was an option to unlock with Apple Watch (security preferences panel). I click it and it says I need to disable the verification of two factor and enable two-factor authentication. Fine.
Did. Now the option to activate Apple Watch unlock on the mac has disappeared.
It works on my other Mac but not the iMac.
Also in the preferences to iCloud account, then on devices, I see that my Apple Watch can be used to receive the codes!
Someone knows how to fix these?
Tried to run iCloud power switch, disconnect the watch and repair, restart everything.
Just to be clear, the Mac is capable of auto unlock, it's an iMac end of 2015 and system report confirms it is compatible.
The apple support page also suggests watches should be able to receive the codes:
-
I have a few email addresses Yahoo and SBC Global, I'm able to check in a single mailbox on yahoo.com, while being able to select in each address when you compose an email.
However, I'm unable to understand how to configure my Apple Mail account to reflect my yahoo.com account. Currently in Apple Mail, I have a separate account of the SBC Global and a separate account of Yahoo. I implemented this way because it was the only way I knew to be able to select different e-mail addresses when you are composing an email. The problem with this configuration is the number of unread emails is doubled due to them being two identical mailboxes.
If possible, I would like to combine/merge the mailboxes while being able to have two e-mail addresses to select when you compose an email.
I hope that what I am asking is logical and someone out there will be a solution because I know that I'm not the only person using several e-mail on the same Yahoo account alias.
Thank you, in advance, for any help you are able to provide.
Chris
Hello and welcome to Apple support communities, OMMBoy.
If I understand your post right, you are wanting to be able to set up your Yahoo/SBC Global account once in post, rather than implement them separately, but still be able to choose one or the other when you dial an outgoing message. I know from personal experience, how practical is to be able to choose the account that come from your emails, so I'm happy to help you find a solution for this today!
It is not a way to 'merge' mail accounts in the mail that you mentioned, but hopefully that won't matter because it seems that these two accounts are already merged on the side server. That you would do so first remove one of these mail e-mail accounts so that only rest. It shouldn't make a difference, that you decide to keep. You can find steps on how to remove one of these email accounts in Mail for Mac: Configure Mail with your email accounts, specifically this section:
Delete an account
When you delete a mail e-mail account, messages from the account are deleted and are no longer available on your Mac. The copies of the messages remain on the mail server account and are still available (from webmail, for example).
Important: If you are not sure if you want to keep the messages are still on the mail server, move or copy them to a mailbox stored on your Mac (the mailbox appears in the section on my Mac in the mail sidebar) before deleting the account in Mail.
Choose Mail > Preferences, and click accounts.
Select an account, then click on the button Delete .
Note: If the account is used by other applications on your Mac, you are prompted to delete the account in Internet accounts system preferences. Click the button to open an Internet account, and then clear the box e-mail for the account. To stop using the account in all applications, make sure that the account is selected, and then click the button Delete .
Once you have one of these e-mail accounts deleted, you will follow the steps of Mail (Yosemite): use e-mail alias, to add the address to remove as an alias. Don't worry that the article shows "Yosemite", the steps are the same for Sierra.
Thank you for using communities of Apple Support.
Take care.
-
I have two copies of the Installer.app?
I have two copies of the Installer.app? When checking my monitor of activity because of the slowness, I have two applications installer which seem to be hogging cpu and memory.
Can I safely remove a... do something corrupt that they are constantly running?
Howdy Celeste Jones,
Thank you for using communities Support from Apple!
From your post it seems that you have a few cases of Installer.app running on your Mac. You have installed previously, and you still see the installers running on your Dock? If so, simply complete the installation process or to leave the installers. If not, then let's go and just restart your computer in safe mode and restart normally to see if the problem persists:
Sierra macOS: start in safe mode
Take care.
-
can I save two devices on a single iCloud?
can I save two devices on a single iCloud?
Yes, if they use the same account Apple ID (iCloud).
Maybe you are looking for
-
Any idea when Vista update will be delivered?
Hello! I applied for an upgrade of Vista a couple of months and my status of the COA is validated according to the website of moduslink, so it should be good. But Vista is already on the market and I have not yet received a copy. Any idea when Modusl
-
I rebuilt my mail and now most of it is gone!
I have rebuilt my e-mail and now I have only 10 emails when I got about 4000 front. I need the post for the purpose of work. I tried to restore to where it has been via the time machine... It seemed that the mail is returned, and then everything disa
-
How to query the object module for the interface of the module interface specific, I need
Hello. Currently using LabVIEW TestStand/2012 2012. I am looking to change the sequence of LabVIEW text translator, and in the CreateStep.vi I am trying to create a step of type WIS_Sequence_Call (a customized version of NI_Types.ini--> SequenceCall)
-
Number of concurrent connections to remote desktop on Windows Server 2008 and 2012
Dear, Can someone help me with what is the maximum number of concurrent connections on Windows Server 2008 (Standard & Enterprise) and Windows Server 2012 as well. Kind regards
-
XP will not load with card its installed
Windows XP SP3 Gigabyte GA-M56S-S3 motherboard. In preparation for an upgrade to Windows 7, I removed my (no Win 7 compatible) Soundblaster Live Drive II and enabled the onboard Realtek Sound.No not really it so bought a Soundblaster SB0730 card. Wit