Number of concurrent connections to remote desktop on Windows Server 2008 and 2012

Similar Questions

• Administrative failling Remote Desktop on Windows Server 2008 R2

  A problem arose on one of my servers to Windows Server 2008 R2, where I can connect is more reliable in the server by using Remote Desktop connection.  If I manually restart all the Remote Desktop services I can sometimes, not all the time, log one time with the DRC, but if I disconnect or close I can't log back in through restarting the service sometimes successful.  I can restart the entire server and no DRC runs at startup.

  The only change that has taken place today, is that I have installed the SolarWinds TFTP server.  DRC worked fine after that for hours.  DRC later no longer worked.  I deleted the server TFTP SolarWindws and the problem persists.

  There is no error in the case where the spectator who are obvious.

  Any thoughts?

  Thank you

  Jordan Winkelman
  E-mail address is removed from the privacy *.

  Hi JordanWinkelman,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Windows Server 2008 R2 General

• I have problems connecting to the remote desktop on Windows Server 2008.

  I have many positions of work XP trying to connect to our servers to Server 2008 Remote Desktop, but get the message, "because of a security error, the client could not connect to the remote computer".

  When I check the version of remote desktop it uses, it is 5.2.3790 in program Files\Remote Desktop

  Now, if I go to Windows\System32, I find mstsc.exe and can connect to the same server perfectly.  But if I go to save the connection, RD is up to version 5.2.

  How can I remove the old version and just use the newest one?

  Thank you.

  Original title: a different version of the remote desktop

  Hi msenior,

  Thanks for posting your query in the Microsoft Community.

  Method-

  I would have you post your query in the TechNet Forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  We know if you need help. We will be happy to help you.

  Thank you.

• I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an Internet service provider

  Hello

  I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an ISP, but to a mac. I want to transfer data via phone ports, have two computers without being connected to the outside world.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Install RDCman 2.2 the use Remote Desktop on windows server 2003 fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  2.2 RDCman install remote desktop on windows 2003 server util fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  CAN ANYONE HELP?

  Hi Mordi26:

  This could be because windows server 2003 is not updated with the latest version of the Terminal Server client. With terminal services client 6.0 update... It should solve the problem. Here is the link to download:

  http://www.Microsoft.com/downloads/en/confirmation.aspx?familyId=cc148041-577f-4201-B62C-d71adc98adb1&displaylang=en

• Pavilion p6110t CTO Desktop: drivers for Windows Server 2008 and HARD drive problems

  Recently, I had the hard drive with my OS failure. After replacing the hard drive and reinstall windows server 2008, I seem to have encountered some problems with drivers.  After insalling Windows, I had 3 items in my device manager that not have installed correctly. I could get the driver for the LAN port to work, but I did not get the driver to "Standard VGA Graphics Adapter" and "SM Bus controller". After a little research, I believe that the graphics card is a Radeon HD4350. With this information, I still have been unable to toinstlal the correct drivers or the other of these elements. I tried several drivers listed on the support page of the drivers on the HP website, but all fo return them the same error of not finding the right operating system. The link to the driver, I used initially on my previous installation seems is no longer valid.

  Also, I can't access two additoinal hard disks (sata connected). They were used with the previous installation of windows without any problem. They appear in the Device Manager but do not show in my computer. A removable disk appears that I don't know what it is. Previously I used the software to mirror one of the disks on the other in order to avoid the loss of data if a disk fails. Is one of the above players with not be able to access the drives causing the problem or the software used before the problem?

  Any help on these questions is greatly appreciated.

  Ok.

  I can't help you with the readers then.  It is out of my area of knowledge.  If they are healthy and active in the disk management utility, then that's all that I know these should be reported.

  As for the graphics drivers...

  Download and install this free utility for files.

  http://www.7-zip.org/

  After installing 7 - zip, right-click on the graphic driver file and select 7 - zip from the list of options.

  Choose 7-zip to extract to: and leave it to unzip the file in a folder.  I have it extracted the file name of the file.

  Then just follow the rest of my instructions to install the driver.

  Of course that you you first go to where 7 - zip extract the folder and continue from there.

• Can I connect using Remote Desktop to Windows 7 Pro to Windows XP Pro?

  Original title: Remote Desktop

  can I connect to a windows 7 pro is a windows xp pro?

  Yes you can, please try the following:

  1 right-click 'Computer' and select 'Properties' (or open 'Control panel' and select 'System')

  2. click on "Remote settings" in the upper left corner of the window
  3. on the "Remote" tab, select "allow connections to this computer remotely.

  4. make sure that you uncheck "Allow only the connection of computers running Office remotely with level (recommended) network authentication" as I'm sure that XP does not support this.

  I hope this helps.

  Please let me know how you go with this

  Concerning

  Chris

• log remote desktop in windows server 2003

  I need to know the steps which leads me to the log file for the desktop connection remote in Terminal Server services and see the admin and the general journal, please.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Remote Desktop on the Server 2008 r2

  I was able to inside my vpn Remote Desktop connection. I am unable to connect using any PC outside. Windows 2008 firewall is set to allow all incoming connections, my VPN firewall is set to allow port 3389 to enter. I'm lost please help!

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Cannot use remote desktop in Win Server 2008 r2 server

  I installed a Win Server 2008 r2 server and I am unable to use RD to access, firewall is turned off, RD config is configured to accept all versions what to do?

  Hello

  You will need to create a new post on the TechNet site for the server support, please see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to connect to my server windows server 2008 and make my computer a workstation?

  I got a new windows 7 computer pro to replace my old windows xp computer. I used the Windows easy transfer tool to move files from my old computer to the new. The old computer is still connected at the moment. I named the computer of the same name and the same password. I did an upgrade from xp to windows 7 on another computer, and it seems to work very well using the same process. It connected automatically to the server. I really want to do when the computer is just a workstation on the network, and anyone can sign any name and password. How can I do?

  It seems that your computer is currently connected to a domain. If it is used in a business environment, you do not have the privilege of setting upward as you wish using the mode of working group due to the policies implemented by the network administrator.

  If you have the option of logging to a local account, it's how you do it:

  Type: MACHINE NAME\Username

  then enter your password.

  How to find the name of your computer:

  Click Start, right click on computer

  Click on properties

  Go to the section name parameters, by domain and workgroup of the computer

  

• Remote - Windows Server 2008 and FE of MS-Access services

  Hello friends,

  I have a FE / may BE 2013 MS-Access database and I want to enter data of multiple users within my WAN.

  The server has 5 remote servers installed and I need to know how can I link the FE with the rervers distance (I'll put the BE in a folder on the server).

  Any ideas?

  Thanking you in advance,

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I configure two ethernet ports to connect to a VPN with Windows Server 2008?

  Something I can put in place, but im stuck with an error that I get is that I need two ethernet ports to configure vpn but why and how do I make it work I like

  original title: vpn windows Server2008

  In order to configure the VPN, you can take a look at:

  http://TechNet.Microsoft.com/en-us/library/cc725734 (WS.10) .aspx

• Desktop remote access simultaneously in windows with multiple session in Windows Server 2008 support?

  I would like to have a remote desktop solution that allows me to connect to remote computers even while users are connected, with the help of another session. The idea is that the user working locally in the remote system can function normally undisturbed by the remote user. I have tried TightVNC , but I couldn't understand how to enter an independent session. I am using Windows Server 2008 and I want two users access to the server with two different sessions as remote users.

  There are forums dedicated to Windows Server, please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• WIndows Server 2008 R2 the number of activations?

  I was wondering how many times he can be reinstalled and that active?
  I got it on the DreamSpark site.

  I hear her 5 times for Win 7 and 10 for the servers, but I don't know if it of true or not.

  2nd question:

  If I miss how should I do?

  I see that you can phone to activate?

  So plug in a microphone and talk to the operator or I do type or what?

  See what I mean (of another Member of the forum):

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Hello Dan_825

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads