Two monitors operations does not not on HP Envy H8

Similar Questions

• Synaptics touchpad two fingers scrolling does not work in the player to develop modern UI application Windows 8.1

  I have a HP Envy TouchSmart UltraBook 4-1161er. Two fingers to scroll worked well in all modern user interface applications that come with the pre-installed operating system Windows 8.1, but the situation changed after the upgrade to Windows 8.1. Now this excellent and very useful two fingers scrolling does not work in the updated reader application. How to make it work?

  If the problem is in the drivers, maybe, install the drivers the latest may correct this?

  I tried to find the latest drivers for the touchpad Synptics in my ultrabook on the HP website, but it's the same old v16.5.3.3, I already have (published in may 2013). Synatics official site contains a link to the latest touchpad driver pack v17.0.19. Can I install it?

  I would try to install the Windows 8.1 (64-bit) driver Synaptics touchpad available in the download section of your sleekbook web support before using compatibility mode.  If the current driver does not work for you, try the earlier versions available .

  If you have no positive results, then use the compatibility mode (select Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most recent.

  To use compatibility mode to install the driver just softpaq to the right, click on the file and choose troubleshoot compatibility. Select Windows 8 and run the installer.

  The following video has a decent explanation, but the Narrator does not get to the point for a bit. Go directly to the minute 4 and watch it from there.

• IN operator does not

  Hi all
  
  I cannot understand how an operator in works in the following cases
  
  I have 2 tables
  TBL
  ----------------
  coltwo (varchar2) colthree (number)
  ABCD/PQR 12345
  ABCD 13452
  PQR 12343
  MNO 12334
  
  Tbl_Main
  ----------------------
  m_col1 (Varchar2) m_col2 (Varchar2)
  A_B_C_D ABCD/PQR
  A1_B1_C1_D1 ABCD/PQR
  E_E_E EEE
  P_Q_R PQR
  
  Declare
  V_var varchar2 (100);
  V_Var2 varchar2 (100);
  Begin
  Select "' | REPLACE (coltwo, "/", "", "') |" ' in V_var from Tbl where colthree = 12345;
  Select coltwo in the Tbl V_var2 where colthree = 12345;
  dbms_output.put_line (V_var);
  dbms_output.put_line (V_var2);
  
  I'm in (select m_col1 IN the Tbl_main WHERE m_col2 IN (V_var) or m_col2 like '%' |) V_Var2 | » %' )
  Loop
  dbms_output.put_line (i.m_col1);
  End loop;
  
  End;
  
  
  Output of DBMS
  -------------------
  'ABCD', 'PQR '.
  ABCD/PQR
  P_Q_R
  
  where as it should be
  -------------------
  'ABCD', 'PQR '.
  ABCD/PQR
  A_B_C_D
  A1_B1_C1_D1
  P_Q_R
  
  
  Packages above should get all the lines of m_col1 of Tbl_Main that m_col2 such as ABCD, ABCD/PQR or PQR.
  but for some reason, I get rows of ABCD/PQR. I don't understand why the in operator does not work.
  It is not an error or a warning outside the above question, everything works fine... can you tell me where I'm wrong or why I get no results except
  
  Thanks
  Saami

  Hi, Sami,

  You set v_var to the string of 12 characters:

  'ABCD','PQR'
  

  The condition

  m_col2 IN (V_var)
  

  is never TRUE with this example data, because m_col2 is never this same string of 12 characters.

  In other words, you make the equivalent of

  m_col2 IN (Q'['ABCD','PQR']')
  

  When there is a 12 string in the IN list, not the equivalent of

  m_col2 IN ( Q'[ABCD]'
            , Q'[PQR]'
            )
  

  where there are 2 strings (one with 4 characters, the other 3 characters) in the IN list.
  Try changing:

  Select ''''||REPLACE( coltwo,'/', ''',''')||'''' into V_var from Tbl where colthree= 12345 ;
  

  TO

  SELECT  '/' || coltwo || '/'
  INTO     v_var
  FROM     tbl
  WHERE     colthree     = 12345;
  

  and also to change the condition

  WHERE m_col2 IN (V_var)
  

  TO

  WHERE   INSTR ( v_var
             , '/' || m_col2 || '/'
             )         > 0
  

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.

• Pay attention to the catalyst control center monitoring program does not work

  computer keeps displays the warning that monitoring program, catalyst Control Center does not work - what is it

  Hello

  ·         Did you make any changes before the show?

  ·         What operating system is installed on the computer?

  I suggest that you download and install the Catalyst Control Center from the AMD website and check if it helps.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• BlackBerry smartphones, I've got two blackberry that does not load

  I have two blackberry 8520 which does not load the loading of the operating system a third then switches works, other charges and reload the software entries... I tried to force the detection that he doesn't show me not all ports that I have downloaded the software but still nothing happens...

  Try this

  Download the software for the device of the carrier's Web site

  Intall on the computer.

  After that plug your device in without the battery, once

  go to start / computer / C drive / Program files (x 86) / Common files / research in motion / application loader / Loader.

  Double-click the LOADER to run.

  Once run it wait detec your device.

  Once done you will be routed to choose your language.

  Select the language and then click NEXT

  After that, you will see 'finished' or 'close '.

  Click on it and the process will start

  during the process when you receive an error that says "cannot detect device".

  put the battery back in and continue on the new attempt until that proceed it process.

  in the end, you may receive a "fatal error occurs", but that's ok.

  your device should restart until now.

• External monitor works does not after upgrade

  Hello friends.

  Computer and software (Production Premium CS5.5) have improved. I use an external bridge connected via Firewire. Premiere Pro sees the bridge but does not the image/video to it. I even managed to capture from the first bridge without problem. No matter what I tried first will not export to the NTSC monitor. He did it in Production Studio Premium. With the software, I had before she would export any SD NTSC image or video. I produce a weekly television show and my external NTSC monitor is a must for the color calibration. Any help would be greatly appreciated.

  CS5.5 Production Premium

  Two DVI monitors

  Quadro 2000 video card

  Windows 7 Professional - 64-bit

  I7 with 16 gigs ram

  

• Facebook forces disconnection when running on two different computers. does not occur with Chrome

  Hello fellow Firefox users!
  This problem has recently begun, probably at the time, I started using Sync. If I use Facebook on my desktop and I am already connected from my laptop, the system requires the laptop to log off when the office sign and vice versa. It gives me the error message of "Please sign in to continue.
  That didn't used to be a problem, and I could run it on two computers at the same time if necessary. I tested the issue on Google Chrome and it does not persist here, so it's most likely a problem of Firefox/Sync. Does anyone know why this can be, and how can I solve this problem?

  Are you sync cookies/history?

• Two finger scroll does not work on the new MacBook

  Did I miss something? Hold scroll a window or a list using trackpad and not the scroll bar lift - but it does not work as advertised.

  The this MacBook, literally 'new', i.e. bought Apple in the last week or two? You have installed third-party extensions that could affect the mouse/trackpad settings?

  C.

• Firefox 8 on Windows 7 (64) Synaptics touchpad gesture with two fingers scrolling does not work. Works in any other program.

  UI.trackpoint_hack. Enabled = 1 does not help. All the Plugins and drivers (Synaptics) up to date. Samsung 900x3a. Slider modifies the icon when running two finger gesture but not scroll. No PDF not loaded. No other open tab. When you load in the tab PDF PDF scrolls with the gesture. Same problem in Thunderbird 8. Reason to use Chrome as standard browser.

  I solved this problem with this registry setting:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTPEnh]
  "UseScrollCursor" = DWORD: 00000000

  You could do it faster with by downloading and running this file: ScollingFix.reg (watch out, click on the link just! there are ads)

  IT disables the small view icon on the cursor. Bad driver from Synaptics...

• Qosmio X 70-A - 11 Q-monitor HDMI does not work

  Hello

  I'm working on my laptop with 2 external displays. It is connected via the VGA and the other via HDMI. Everything worked fine until yesterday when my HDMI monitor could not be found.

  Things I've tried:
  I tested the moitor by connecting it with another computer, and it worked (with HDMI), then the monitor can not be the question.
  I also tried another HDMI cable... didn't work ether.
  BIOS is updated to the latest version
  graphic driver NVIDIA graphics card and the graphics card intel standard is updated to the latest version.

  Also a strange thing: when im in the menu of the BIOS while having VGA connected the screen keeps turning black for 1-2 seconds and then turn it on again

  Would be nice to get advice on what I can do :)
  Thank you

  Hello

  You are able to use the HDMI output port without connecting to another additional monitor to the VGA port? Please check because in my experience, it should be possible to use the HDMI or VGA port.

  However, I think that the problem might be related to one of the graphic card driver.
  Why? I think that a video output port would be controlled by a single graphics chip.
  In the case where you are using two monitors at the same time (VGA and HDMI) video card (nVidia or Intel) would control VGA port and the other HDMI port.

  I think that you need to reinstall the Intel display driver.
  First, you must uninstall the installed Intel display driver of the system (this in Device Manager). Then, you must restart the laptop. On the page of the Toshiba UE driver you will find the latest Intel driver v10.18.10.3308
  This driver is released to win 8.1 and 8 Win and Win 7

  Recommends that you install this version to fix the HDMI problem

• Pavilion 500-449: monitor screen does not work with the new HP Pavilion 500-449

  Not sure if 64-bit or 32-bit.  More HP vs 19 flat screen LCD monitor or new monitor LG Flatron E2242 will appear with new HP Paviion 500-449.  Both will be lit.  Monitor says HP VGA No. imput and goes to sleep.  LG monitor says it's to enter the mode, same thing, I guess that energy saving.  The two appear on older HP Pavilion a1430n.  Store support suggests the problem lies in the monitor menu options but they do not display with a try monitor.

  Abandoned and reduced to store.  When they were scuffered too until they tried a second monitor in the back and noticed that it connected to a different place in the back!  Seems a converter is needed for old VGA monitors and then he plugs into a completely different place.  Originally, the husband plugged the power cord VGA of my screen instead of ONLY on the back, he could go, the marked spot VGA.  No, the converter is a big plug and can only fit above in a place with NO Label at all.  On top of that, everything IS there a converter plug supplied in the box with the computer, but there is absolutely NO mention of what to do with it, or where it goes.    I feel better that the store did not know that either; Clips by the way, where the young man was very nice.    He only discovered by accident because the store had two monitors with different plugs on the end.

  Short Stort of long, if yours doesn't receive will check that plug that goes to the tower.  You may need a converter and it can even be provided.

• snyaptics touchpad two fingers scrolling does not

  Please help me...

  snyaptics TouchPad V7.2

  in the center of the action his display device works properly, but it does not at all...

  given that week I m facing this problem...

  Right now, it is difficult to determine if the problem is hardware or software. To determine this, I would like you to reinstall the operating system. It will clarify all software conflict and allow you to start over.

  First of all, please make sure that you back up your files. Here is information on how to proceed: backup of files (Windows 8)

  Once this is done, it is safe to reinstall the operating system. Performing a recovery of HP (Windows 8) system

  If the same situation occurs, the risk computer has a faulty hardware. At this time, please contact HP phone support. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Mario

• Trying to connect two monitors but do not have a second video out port

  I have a Nvidia Gforce 9600GT video card. I was wondering if there was anyway I could use the internal monitor port as well and if so, how?

  * original title - monitor issues *.

  Then, you can not use two monitors.

• HP 2159 m monitor audio does not work

  I would have assumed that the driver download, etc., would have set up correctly, but it does not work. (or I'm expecting something that does not happen?) For example, in listening to an Internet radio station, the only sound I get is from the hard drive & not the speakers in the monitor. Any ideas?

  How did your monitor connected to your PC?   VGA, DVI or HDMI?   VGA or DVI connections need an audio cable from the monitor to the audio output on the back of your PC.

  What model of PC you are using?

  I have this same split-screen on my e9280t PC connected via DVI with audio cable.

• Interactive report 'IN' operator does not work with commas

  Hello

  I use an interactive report of the APEX and I need to filter a column of values a couple.  I use the IN operator column.  However, one of the channels I'm looking for has a comma in it.  The IR treats this as a delimiter and does not find the value. For example, I want to filter the values:

  Oracle Canada ULC

  Oracle America, Inc..

  The operational unit IN in the IR is equal to 'Oracle Canada ULC, Oracle America, Inc...  He finds only the lines with 'Oracle Canada ULC'.  He seems to think that "Oracle America" is the second value in research and "Inc." is the third and can't find anything for them.

  Is there a way to escape the comma in "Oracle America, Inc." so he treats the entire string as a value to search for?

  Thank you

  Steve

  To in front-end (user) has chosen Actions-> filter-> filter-> line Type

  • In the columns , choose your column (operational unit)
  • Functions/operators choose IN
  • In Filter Expression, type your expression ("Oracle Canada ULC", "Oracle America, Inc.")