Two monitors will not show extended display

Similar Questions

• My Apple Watch will not show its display and its new brand

  MY wife has paired his brand new iwatch all at the time and now the screen is empty, even if the watch is in talks with him

  Hello

  Voice-over (a function of accessibility that includes screen curtain) has been activated on your wife watch.

  • To turn off VoiceOver:
    • On the iPhone of your wife, in the application of the watch, go to: My Watch (tab) > general > accessibility > VoiceOver > disable VoiceOver and screen curtain.
    • Or use Siri: press and hold the digital Crown until your wife feels a slap on her wrist > and then say: "Disable VoiceOver."
  • If the accessibility shortcut has been enabled and configured for VoiceOver, your wife can also enable and disable functionality more conveniently:
    • On the Watch: quickly press the digital Crown (the round button) three times.
  • To set up accessibility shortcuts:
    • On the iPhone of your wife, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect VoiceOver.

• HP dv6700 monitor will not display.

  I see other posts about this problem in 2011 without solution. Dv6700 monitor will not display or display a go to sleep avter a few moments.

  Hi @WoodyJr9,

  Welcome to the Forums of HP Support!

  I understand that you are having problems with your screen either vacuum or go to sleep after a few seconds.  I'm happy to help you with this.

  Please see the following, because it can be the starting point with the problem you mention.
  Solve problems with sleep and the night before extended Modes (Windows Vista)

  If this does not help, then take a look at these:

  The display is Dim during or after the boot or startup

  Troubleshooting of black screens with no start-up or start-up error message
  Diagnose a display LCD (LCD) for damage

  Another thing you can try is updating drivers, if you don't have already done.

  HP Pavilion dv6700 CTO Entertainment Notebook PC Drivers

  Please let me know if this was helpful.

• AfterEffects CS6 will not show on my Adobe Creative cloud. I work in a school district. The error message is: ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer service. "It is to go

  AfterEffects CS6 will not show on my Adobe Creative cloud. I work in a school district. The error message is: ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer service. "This has happened during about two weeks, give or take. Everything is displayed. Are there patches? Thank you

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• U2415 monitor will not connect.

  U2415 monitor will not connect.  Get the message "no connection DP.  New out of the box yesterday from Dell.  Tried the two connectors supplied DP.  Also tried HDMI to HDMI.  I was assured by the sales these last connection was sure to work.  Now the Dell support told me my only option is an expensive (~ $ 60) VGA adapter DP.  My computer is a 18 months, Dell XPS 8700 running windows 8.1.  Looks like a return if this is even possible.  Buy all Dell for 20 years, but maybe it's the end of it.

  The serial number you provided you bring here? Anyway,.

  So there are two ways to connect =

  NVIDIA GeForce GT 635 exit HDMI--> HDMI to HDMI Cable--> U2415 (on the left looking at the back) HDMI in
  * Press the key Menu of U2415
  * Go to the input Source
  * Choose HDMI 1

  NVIDIA GeForce GT 635 DP on--> U2415 CDM DP cable--> U2415 CDM in
  * Press the key Menu of U2415
  * Go to the input Source
  * Choose MiniDisplayPort

• iPad Mini will not show iOS10 update?

  Hi all.

  My iPad mini 1st generation will not show the update option to iOS10 via iTunes or wireless.

  Any suggestions how?

  Your iPad CPU is not powerful enough to run iOS 10.

  (144743)

• My Apple TV is only to play a sound on my iPad but will not show the film?

  My Apple TV is only to play a sound on my iPad but will not show the film?

  Welcome to the Jennifer Apple community.

  Some content providers don't block the video portion working with AirPlay, have you checked to see if AirPlay is supported by this provider.

  If it is supported

  these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > General > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your mobile device.

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave

  problem title: original accessory

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  What do you say "he's not leaving"? He kept playing with his only non-stop?
  If it is 'yes' or 'no', you can always he kill 'soft' media player.

  Take a look at your video accessory. What are the last 3 numbers, such as avi, mpeg, mov etc. ?
  It is possible that your video accessory is in a format unsupported by Windows Media Player.
  Save it in a folder of your choice.
  Googe for a FREE video converter (if you do not have one) and convert the video file toWMV.
  Now you should be able to read in the drive media with images and sounds.

  t-4-2

• When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.

  When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.  This has happened when I changed service providers

  When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.  This has happened when I changed service providers

  ===================================
  Try to visit the support site of your new service provider
  and search for instructions on how to set up your email.

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• How can I change the workspace to a color for my computer screen will not show

  How can I change the workspace to a color for my computer screen will not show	Submit question

  	Submit question

  Photoshop CS6 now opens by default with the "Application Framework" lighted. You can go window > frame application in the main menu and uncheck this

  We have a lot of useful information in the FAQ section. The answer to this question was also there. See the link:

  FAQ: UI - how do I change the color theme, text size, or cut the course of enforcement?

  Feel free to browse other FAQS, there might be a few other things of interest.

  Guinot

• Two monitors is not displayed when both connected

  Everything worked before installing the video driver of the AutoCad Web site.  Now when I run sys with two connected mons the "Unable to display - optimal resolution 1280 X 1024" msg - I unplug a monitor and others, then displays the login screen of Windows 7 and I can use the system.

  T5600 station work Dell, graphics Nvidia Quadro 4000 card, monitors Dell 2 1280 X 1024 (models 1907 & 1908).

  After the driver installation, the control panel was a "mosaic" option, I thought I was to extend the desktop on two monitors (extending over them) and I thought I would try it - big mistake - don't remember exactly what happened then but to restart get the msg above.  I unplugged one of the monitors to connect to another in the hope of resolving the problem, and that's when I discovered that the other monitor will display video if they both were not connected. ???

  Since then, I tried to restore the driver, installed a video driver from the Dell website and I'm still being downloaded from the Dell drivers in the hope that I'll get lucky.  I'm still at the point where the two monitors connected to cause the msg but that one monitor and everything is fine?

  Any help much appreciated!

  Always include the version of Windows in your messages.

  You could try a system restore to last date available before you installed this AutoCad driver. Personal folders shouldn't be affected but still good backward first. How to access the system restore depends on which version of Windows you are using...

  After the system restore, you must reinstall all updates to Windows or some other updates that were initially installed after the date used to restore the system. But - of course - does not reinstall the driver of AutoCad.

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• Two monitors does not

  I've set up two monitors on my laptop.  I went to the settings and changed its expansion just as they said in the help section.  It is said that I should now be able to drag a window to the other monitor.  BUT, everytime I try, it puts just this window on that side of my screen.  It goes to the other monitor.  My other monitor is just my wallpaper showing and nothing else.  How can I change this?

  Hello

  These should contribute. You can set the monitors to work as a single office (can drag and drop across
  also the programs cannot be fullscreen - reduce the size) or they can be set to work as
  two separate monitors where you open the programs you want on each.

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  How can I configure two monitors in Windows Vista?
  http://www.tweaksforgeeks.com/Windows-Vista/2008/01/how-do-i-setup-dual-monitors-in-Windows-Vista

  Tutorial: How to set up two monitors (Windows) - video
  http://www.YouTube.com/watch?v=YFCpaAs5s3c

  How to set up multiple monitors
  http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.html

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.