two PID.vi effect each other or not in the same program?

Similar Questions

• Problems with updating apps - 1 computer goes, the other will not be the same Adobe ID

  have a full subscription to CC one installed the applications on an iMac a pro dMacbook. Last updated iMAC night a series of applications including Photoshop, Lightroom, Bridge, a dDreamweaver. The laptop to update Lightroom a dDreamweaver. To date, heard Photoshop and Bridge. Cam Raw with 9.4 still NO 9.5. Opening image of Lightroom in Camera Rw Raw said LR version ahead of Photoshop and raw Cam 9.5 update.  Prelude to a more wacky, also set effects to date on iMac, but not on the laptop. Any suggestions for a cure so I'm able to update applications to stay in harmony. Tried to uninstall bridge a resettlement but CamRaw stuck at 9.4. Thanks for your collective advice.

  Try direct updates

  CC updates to 2015:

  http://prodesigntools.com/Adobe-CC-2015-updates-links-Windows.html

  http://prodesigntools.com/Adobe-CC-2015-updates-links-Mac.html

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Using the same virtual machine on two macs, but not at the same time

  Hello

  I searched this site and the Internet in general, but I couldn't find an answer to this question, so my apologies if this is requested before and if so, please point me to the answer.

  I have an iMac with Bootcamp with Windows 7 Professional x 64 partition and everything works fine.

  I would like to install 6 Fusion and create a virtual machine from the Bootcamp partition, try it for a while and then delete the Bootcamp partition. I found a complete documentation about this and I should be able to do this without any problems, except perhaps for the reactivation of Windows.

  Now the question: since I move sometimes, I would like to be able to move this virtual machine on a Macbook Pro, so I must not move file, sync, etc., and the virtual machine will not at the same time. I read that you use Move so the address UUID and Mac do not change, but I don't know if this applies to move the virtual machine to another computer. If my is:

  (1) is it possible?

  (2) what I have to buy a second copy of Fusion 6 or there is a player that will allow me to run the virtual machine on the macbook?

  Thank you

  Luciano

  I have experimented with a Windows 7 VM, copied (but I have 2 licenses of retail sales) a mini Mac Core 2 Duo to a Core i7 MacBook Pro retina: well, despite the different processor, he did not ask a reactivation, strangely, even after a few resets. Windows 7 so, seems at least to be quite "tolerant", on this front.

• Double sims does not at the same time.

  I live in the United Kingdom, has recently purchased the bike G XT1068 new dual sim. I've been on for ages from 3 mobile and get a very good reception where I live. So I chose 3 for the second sim card like I need separate work/personal numbers. However, when I'm at home (where I work) only 1 sim both working. The SIM that contains on mobile data (you can't have one at a time) works brilliantly, but the other did not whether the reception. This means that the function double sim doesn't work at all, as I need two phone numbers to be active to receive/make calls. 3 mobile say they can't help that they agree that we are in a good area for their signal, so it takes the handset. Is there a fault?

  This works as expected. The phone only has a modem. While in standby mode, you can take a call from each SIM.

  Mark

  Forums Manager

• How to have two copies of the same program to install on WIndows 7 and on the desktop

  «"" "Dear help forum:»»"»

  I am new to WIndows 7, but just have not found the right research
  How to get my answer from Microsoft/Windows 7 basic knowledge.

  I have two programs. There are two versions of the same program
  ('LACE') One is the version 4.0.1, and the other is Version 4.0.6.

  I wish I had one old continue to run (using a purchased
  Product key which I own and have for years).

  BUT there is a problem. The old and new programs are the
  same 'setup.exe '? Download 124 MB each. There are small but
  many corrections and changes in the new program, I am told, but
  they do not have add up to change the size in MB of the program.

  SO I'm in trouble when I'm trying to download the program, as
  It seems to be in WIndows 7, a small program that removes the
  size of the incoming download and informed me that I can not download
  a new that I have already one of this program is installed in the
  computer!

  He asks me if I want to "Uninstall" the previous version and then replace
  It is with a new one. I can't cancel the old version because she had a
  Product key that was told to me in the instructions that he could
  only be used 'once', to uninstall the program won't help
  me as I won't be able to continue to use this program once again, as the
  registration code could only be used once.

  I have a purchased code new, different program version 4.0.6.

  Is this a problem with WIndows 7? I already called/sent the
  company and they have no help and no solution for how these two programs
  are to run on the same computer at the same time.

  Can you please help me and provide instructions on how I load
  This program of "LACE" most recent second size 124 MB and even download
  name in the computer (replacing the automated duplicate program
  prevention installer routine), so I can have and use two copies of
  This program on the computer at the same time?

  During the creation of this issue, I had an idea of what will happen if I created a
  second Downloaded Programs folder to contain the program setup.exe inside
  and try the operation or the opening of this place. He did not like
  the program checked the computer for the first copies of the
  LACE and identified, he was always present in the computer and asked
  Once again if I wanted to remove it.

  Thank you very much!

  If this program is not designed for the execution of the two copies on a single installation of Windows, then you simply can't do.  No ifs, ANDS or goals.  You have never been able to do with any version of Windows, and apparently the creators of this program thinks there is no reason to do so, then you'll just have to choose one version or another.  I'm not familiar with the lace, but more recent versions programs usually include most of the older features while adding the most recent.  They sometimes make us learn new ways of doing things that make us less happy, but I'm afraid that's life in the world of computing.

  That said, I must mention that there may be alternatives that you might continue even if they are less obvious than what you suggested.  If you have the professional version or full edition of Windows, you can get XP mode free you can start Windows 7.  It normally happens in 15 to 30 seconds and you could install and run another version of your program under that.  If you do not either of these versions, you can invest in the Anytime Upgrade and do it available.  Upgrade Home Premium to professional is $ 90.

  The other alternative would be a dual-boot configuration where you could have two versions of Windows in separate partitions, so when you start your computer, you can select the one with the version of your program you want.  I think that the choice of the XP mode would be preferable because it would be so much easier to use, but these two options are available, if you want to continue.

  Good luck.

• Notes, not in the same Apple account synchronization

  My user's devices: iMac iPad iOS 9.3.2 and iPhone iOS 9.3.2 10.11.5,

  It has 2 accounts iCloud: [email protected] and [email protected]

  The iMac has only [email protected] configured as the main account iCloud.

  The iPad has [email protected] configured as the main account iCloud and [email protected] as one account secondary iCloud

  Its iPhone has the configured as the main iCloud [email protected] and the [email protected] account is configured as a secondary iCloud account

  Notes is enabled on all devices and in all accounts.

  Here's the complete bizarreness...

  Notes [email protected] on his iPad and its application of iMac Notes are the same and full synchronization, BUT in the Notes of [email protected] on his iPhone is different most are and DO NOT synchronize with its iPad or iMac.

  I'm puzzled.

  Other notes & comments:

  -Notes are not saved locally on any device

  -Although [email protected] is the account main iCloud on this iPhone, the default account for the notes is [email protected]

  -When his signs in [email protected] to iCloud.com, notes to the Notes site iCloud application are the same and are in complete sync with iPhone [email protected] account ONLY.

  -If a [email protected] Note is changed or created again on his iPad, the note doesn't appear in sync on his iMac notes app and vice versa. Not on the iPhone or iCloud.com

  -If a [email protected] Note is changed or created again on his iPhone, the note appears in sync on the iCloud site Notes app and vice versa

  Any help appreciated for this problem of stadium.

  Thank you

  Well, to answer the question quite simply, in order to synchronize Notes between the three devices, each of them must be signed in with the same ID Apple/iCloud iCloud (@me.com).

  In addition, under settings > iCloud on iPhone and iPad, Notes must be turned on. Under system preferences > iCloud on Mac, Notes must be turned on.

  On the devices in the application Notes, when you click on the arrow to the left at the top on the left, make sure you use 'Notes' in iCloud.

  If you are running iOS 9 on your devices, and that you have upgraded to the latest version of Notes, Mac must be running OS X El Capitan to synchronize.

  See you soon,.

  GB

• Two quiz under the same program

  Hi guys...

  Is it possible to have 2 quizzes in captivate under the same program? For example, the user can select the beginners or advanced test, and of course, it would be necessary result two slides, one for each quiz.

  Concerning

  Very well, it will be less cumbersome to have to create your own Question slides.

  Please, in the interest of other readers, if we answer your question, could mark you "response"?

  Lilybiri

• my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  Hi rog247,

  Thanks for posting here in Support of Apple communities! After reading your post, I see that your iPhone 4S shows 'No Service'. It is certainly important to have access to mobile data; I would like to help get this sorted out.

  Please follow the instructions here:
  

  If you see no Service or research

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
     • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
     • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
       
  2. Restart your iPhone or iPad.
  3. Looking for a carrier settings update.
  4. Update your iPhone or iPad to the latest version of iOS.
  5. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  6. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  7. If you have another device, see if you can connect your business with her network to this place.
  8. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you cannot connect to a cellular network or cellular data - Apple Support

  See you soon!

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• Windows 7 taskbar and start menu large icons are either missing (empty by default) or do not show the right program.

  I use Windows 7 Home Premium on an AMD Athlon (TM) II X 4 630 2.80 GHz with 6.0 GB of RAM (64 bit OS). PC is up-to-date with the latest updates and use Norton Anti Virus.

  I used this PC for several months with no problems. After doing some research in my menu of the taskbar Windows Explorer and start icons have become corrupted. The links always work but do not show the right program.

  I tried several things to fix this. I removed everything in the start menu and taskbar, rebooted, added a few back but the problem still exists. I deleted the icon cache file (renamed to db.old), restarted, problem still exist. I made a recovery of a checkpoint system before the problem was still not fixed. When I go to small icons, the problem disappears. The problem only seems to appear when you use large icons in the bar of tasks and the start menu.

  Based on what I've tried so far is there any other suggestions on how to fix this?

  This tutorial is to rebuild the icon cache when the cache is corrupt.

  http://www.SevenForums.com/tutorials/49819-icon-cache-rebuild.html

  Option One is easier.

  If that doesn't do anything for you, please repost to Windows 7 forum, section office and customization:
  http://social.answers.Microsoft.com/forums/en-us/w7desktop/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• "Error 1079: the account specified for the service is different from the specifiedfor account other services running in the same process" when I try to start it manually to the top of some program services.

  Original title: How can I restore my services to the default state.

  Here is the error message when I try to start it manually to the top of some service programs.

  "Windows cannot start the Diagnostic Policy on Local computer service."

  "Error 1079: the account specified for the service is different from the specified account.

  for other services running in the same process. »

  Hi raospent,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what services you try to start?

  You can follow this link & check if it helps.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  Hope the helps of information.
  Please post back and we do know.

• Can I also install Windows 7 on my other pc and we the same product key?

  I have a genuine copy of windows 7 and install it on my pc, I can also install it on my other pc and we the same product key. My other pc needs a clean install and has its own product key on his windows 7 can I use this key after installation, any help would be great

  Original title: installation of Windows 7

  No, the key that can be used with 32-bit or 64-bit Windows 7 is exclusively for use with the disc 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Home Premium

  Full version-

  Microsoft Windows 7 Ultimate

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  Version upgrade-

  Microsoft Windows 7 Ultimate Upgrade

  Version upgrade-

  Microsoft Windows 7 Home Premium Upgrade

  Family Pack:

  Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users)

• Drop-down menu SENDTO does not contain the same list as in the SENDTO folder in the User\Appdata\microsoft\windows\sendto folder.

  Prior to Win7 and Vista (seems to have the same problem), make a right click on a file would produce a drop down menu containing SENDTO containing various options like send this Word file, or write or Adobe or desktop (make a shortcut).  Other options of destination could be added by finding and opening the SENDTO folder and dragging shortcuts in there.  These added destinations would appear then in the menu drop down click the right button.  The feature doesn't seem to work in Win7.  The SENDTO drop contains the locations that are not in the SENDTO folder.  I've renamed the SENDTO folder to see what would happen.  Always in the same places appear in the menu dropdown.  It seems that Win7 has a situation he's going to other than the SENDTO folder.  Interestingly, I can add some program shortcuts in the SENDTO folder and they will appear in the drop-down list, others do not like the trash.  There are items in the drop-down menu are not in the SENDTO folder.  Help Help

  Click on the round of Windows (start), type shell: sendto and hit enter, add or remove shortcuts. Is it now behave properly?

  I forgot to post the location of SendTo folder, it's C:\Users\UserName\AppData\Roaming\Microsoft\Windows\SendTo

• inputText and ouputText does not display the same value

  Hello

  JDev 11.1.2.4

  On my page, I have an inputText and outputText bound to the same link of the attribute. The bind value is defined in a value change listener, and then the two components are updated. Say I put in 2009 for the PeriodFrom, the inputText remains empty, but the outputText shows the 2009. How is possible that the two items related to the same link does not show the same value.

  < af:inputText value = "#{bindings." PeriodFrom.inputValue}"required =" #{bindings. " PeriodFrom.hints.mandatory}.

  columns = "#{bindings." PeriodFrom.hints.displayWidth}"shortDesc =" #{bindings. " PeriodFrom.hints.tooltip}"id ="id1 ".

  autoSubmit = "true" simple = "true" >

  < f: validator binding = "#{bindings." PeriodFrom.validator} "/ >"

  < / af:inputText >

  < af:outputText value = "#{bindings." PeriodFrom.inputValue}"id ="ot3"clientComponent ="true"/ >

  Furthermore, I tried to get the RichInputText component and call a getValue on it, and the value returned is 2009. I'm completely lost.

  Thank you

  I made the fragment of page from scratch. I discovered why the update does not work. This is because the selectOneChoice is inside an af:subform. If I remove the subform, the update works correctly.

  shortDesc = "#{bindings." StdcntyCode.hints.tooltip}"id ="soc2"simple ="true"autoSubmit = 'true '.

  valueChangeListener = "#{pageFlowScope.identificationSessionEditBean.countryValueChangeListener}" > "

  columns = "#{bindings." PeriodFrom.hints.displayWidth}"shortDesc =" #{bindings. " PeriodFrom.hints.tooltip}"id ="id1 ".

  autoSubmit = "true" simple = "true" >

  columns = "#{bindings." PeriodTo.hints.displayWidth}"shortDesc =" #{bindings. " PeriodTo.hints.tooltip}"id ="id2 ".

  autoSubmit = "true" simple = "true" >