Two problems: weak performance and backup of stall

Similar Questions

• Problems of performance and more recent PPAPI Flash Player free?

  Hello

  I recently noticed some pretty serious performance issues in the latest versions of PPAPI Flash Player in Chrome.

  I use:

  • Windows 7 64 bit
  • Version of chrome 41.0.2272.101 m (64-bit)
  • Flash Player Version PPAPI: 17.0.0.134

  I noticed a sharp decline in performance recently when updating of Chrome, I've been using Away3D 4.1 (using Stage3D) to create a series of generative Art experiments, if you check out the one below that I found in Internet Explorer and Firefox (using the version of the Flash Player NPAPI), the performance of FPS on my system is about 35-40 fps for me , but in drive PPAPI of Chrome, it fell drastically to all about 6 or 7 fps.

  Recently I updated my version of Chrome, so this is a recent change... around a few weeks ago, that this content was working fine in Chrome, around 35-40 fps even I get in other browsers.

  http://Waroo.com/genart9s

  Did anyone else out there see these performance issues with recent versions of the Chrome PPAPI Flash Player?

  That's the good news, thank you for the update.  We work closely with the team of Chrome, and there were corrections of the performance of both sides.  I have to debug it to understand which give, but it is good to know that things are trending in the right direction.  We would certainly reach parity with NPAPI in terms of performance (he has often a trade-off between security and performance), and we will continue to target for earnings opportunities wherever they present themselves.

  Thank you!

• Problem user HotSync and backup

  Hello! I'm having a little trouble with the hotsync process and can't find anything relevant in the troubleshooting pages.

  He was not used to do this, but,.

  N ° 1: every time I hotsync, the computer asks me to assign a new user name or identify the user

  No. 2: he then began to reinstall ALL my files that are already on the Palm of the computer toward the palm and card

  N ° 3: it gets stuck on a file somewhere near the end of the process, and that the computer answers 'Cancel '. The palm cancels and prompts a reset, but only about 10 minutes after tapping "Cancel".

  If someone can give an explanation or point me to the thread, I sure would appreciate it.

  By renaming the backup folder, you have saved the file to a different name, so if you need you can always get it and it is not completely removed, but since it is renamed, it is not connected to your user name so it is not placed on your palm.

  See if you find the graffiti folder in the backup folder and rename as well.

  Let me know if you can sync without problems now.

  Message relates to: Tungsten E2

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• Two problems. New installation. (Question loading and certificate of the page).

  So, I have recently reinstalled FF, thinking I'd give it a try. And I immediately ran into two problems.

  The first of them being that facebook does not seem to work correctly at all. Attached image.
  The second is that I get a message of invalid certificate on Web sites, that I used most often. For example, I'll use the site Web of Halo Waypoint. Ran and owned by Microsoft/343 Industries. I do not get an option "Add expection" on these pages. Also attached image.

  Hi, in case, you're an avast user, please try to disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• I have an iPhone and a MacBook Air 11 '' 6. iPhone 6 syncs and backup icloud. I can access iCloud via the net on MacBook.  The problem is that I can't get the MacBook to sync with iCloud.  How can I do this?  Help, please. Thank you.

  I have an iPhone and a MacBook Air 11 '' 6. iPhone 6 syncs and backup icloud. I can access iCloud via the net on MacBook.  The problem is, I can't get the MacBook to sync with iCloud.  How can I do this?  Help, please. Thank you.

  What, in particular, looking to sync with the Mac iCloud? If you mean things like Contacts, calendars, Notes, etc., then you want to go in under the  system preferences, click the iCloud and connect to iCloud there with your iCloud ID. Then select which items you want to sync'd via iCloud.

  What - what are you trying to do?

  See you soon,.

  GB

• Two problems that seem to be related. The screen turns off suddenly and reappears when the mouse is clicked. At the same time, the cursor insertion point disappears.

  The cursor disappears during the strike. It is blackened and cursor disappeared three times during the typing of this sentence. Very frustrating! I'm running Windows 7 Pro on a Dell Inspiron.

  Hi Ed,

  Thanks for posting your question in the Microsoft community.

  I understand that you have 2 problems on your Windows 7 computer.

  1. The screen turns off when you click with the mouse.
  2. The cursor on the screen disappears while typing.

  Let me know if this interpretation is erroneous. To better understand the issue, let me ask a few questions.

  1. What is the brand and model of the computer?
  2. You did changes to the computer before the show?

  I am here to help you and I suggest these methods to solve the problem.

  Method 1:

  Start the computer in safe mode and check if the same problems occur. Safe mode allows only a minimum set of services to load, this will help us to know if a service is causing the problem.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  If the problem does not occur in safe mode, and then perform a clean boot, this will turn off non-Microsoft services and therefore to determine if any non-Microsoft service is causing a conflict for the problem to occur.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow the steps in the article to configure the computer to start the Normal start.

  Method 3:

  The question could have occurred because the drivers on your computers are not updated. See the link, follow the steps and update the drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check this link for more information.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  View the status of the issue. If the problem persists then let know us, we will provide several methods.

• I use TDE tablespace encriptación and backup is performed (no encriptación rman). I get the error message when you try to restore the database

  I use TDE tablespace encriptación and backup is performed (no encriptación rman). I deleted the database and try to restore the backup. I get the error when you try to restore the database with rman restore database.

  ORA-19870: error when restoring backup piece + FRA_DG, oratst, backupset, 2015_03_2

  ORA-19913: could not decrypt the backup

  ORA-28365: portfolio is not open

  About what I know, you should be able to RESTORE the data, but no RECOVERY without portfolio being opened.

  Check the value of the variable environment - ORACLE_UNQNAME

  It has everything first a correct value and try to open the wallet.

  HTH,

  Pradeep

• Should we leave how much free space on the C drive before affecting the performance and speed?

  Hello!

  Hard drive of my new PC (C) is 1 TB (processor Samsung 7i, Windows 8.1). It doesn't have any other disk/partition. How this space is safe to use to store large files (videos, esp., stored in the native video library file) without harming the performance and speed?

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Thank you!

  Anna

  Sunday, March 1, 2015 10:59 + 0000, AnaFilipaLopes wrote:

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Planning your Partitions

  The Question

  Partitions, how much should I have on my hard drive, what do I use
  each of them for, and what size should each one be?

  It s a common question, but unfortunately this doesn t have a
  only simple, just answer to all the world. A lot of people will respond with
  the way they do, but their response isn't necessarily best for the
  person seeking (in many cases it isn't right even for the person)
  response).

  Terminology

  First, let's rethinking the terminology. Some people ask "should I".
  partition my drive? That s the wrong question, because the
  the terminology is a little strange. Some people think that the word
  "partition" means divide the drive into two or more partitions.
  That s not correct: to partition a drive is to create one or several
  partitions on it. You must have at least one partition to use
  He who think they have an unpartitioned disk actually
  have a player with only one partition on it and it s normally
  Called C:. The choice you have is to have more than one
  partition, not that it's the partition at all.

  A bit of history

  Back before Windows 95 OEM Service Release 2 (also known as Windows
  95 (b) was published in 1996, all MS-DOS and Windows hard drives have been set
  using the file system FAT16 (except for very tiny to aid
  FAT12). That 16-bit only because were used for addressing, FAT16 has a
  maximum 2 GB partition size.

  More than 2 GB of hard disks were rare at the time, but if you had
  one, you must have multiple partitions to use all the available
  space. But even if your drive was not larger than 2GB, FAT16 created
  Another serious problem for many people - the size of the cluster has been
  more great if you had a larger partition. Cluster sizes increased from 512
  bytes for a partition to no greater than32Mb all the way up to 32 KB for a
  partition of 1 GB or more.

  More the cluster size, the space more is wasted on a hard drive.
  That s as space for all the files is allocated in whole clusters
  only. If you have 32 KB clusters, a 1 byte file takes 32 KB, a file, a
  greater than 32 k byte takes 64 k and so on. On average, each file
  about half of his last group waste.

  If large partitions create a lot of waste (called "soft"). With a 2 GB
  FAT16 drive in a single cluster, if you have 10,000 files, each
  lose half a cluster of 32 KB, you lose about 160 MB for relationships. This s
  back in an important part of a player that probably cost more than $400
  1996 - around $ 32.

  So what did the people? They divided their 2 GB drive in two,
  three or more logical drives. Each of these logical drives has been
  smaller the real physical disk, had smaller clusters, and
  so less waste. If, for example, she was able to keep all the partitions
  less than 512 MB, cluster size was only 8 KB, and the loss was reduced to a
  a quarter of what it would be otherwise.

  People partitioned for other reasons also, but back in the days of
  FAT16, it was the main reason to do so.

  The present

  Three things have changed radically since 1996:

  1. the FAT32 and NTFS file systems came along, allowing a larger
  partitions with smaller clusters and so much less waste. In
  with NTFS, cluster sizes are 4 K, regardless of the size of the partition.

  2 hard drives have become much larger, often more than 1 TB (1000 GB) in
  size.

  3 hard drives have become much cheaper. For example, a 500 GB drive
  can be bought today for about $50. That s 250 times the size of this
  Player 2Gb typical 1996, about one-eighth of the price.

  What these things mean together which is the reason to be old to have
  multiple partitions to avoid the considerable wastage of disk space left.
  The amount of waste is much less than it used to be and the cost of
  that waste is much less. For all practical purposes, almost nobody does
  should no longer be concerned about slack, and it should no longer be
  has examined when planning your partition structure.

  What Partitions are used for today

  There are a variety of different ways people put in place several
  scores of these days. Some of these uses are reasonable, some are
  debatable, some are downright bad. I'll discuss a number of Commons
  partition types in the following:

  1. a partition for Windows only

  Most of the people who create such a partition are because they believe
  If they never have to reinstall Windows properly, at least they
  He won t lose their data and he won t have to reinstall their applications.
  because both are safe on other partitions.

  The first of these thoughts is a false comfort and the second
  is downright bad. See the analysis of the types of partition 2 and 4
  below to find out why.

  Also note that over the years, a lot of people who find their windows
  partition that has begun to be the right size proves to be too
  small. For example, if you have such a partition for Windows and later
  upgrade to a newer version of Windows, you may find that your Windows
  partition is too small.

  2. a partition for installed programs

  This normally goes hand in hand with the partition type 1, a partition for
  just Windows. The thought that if you reinstall Windows, your
  installed application programs are safe if they are in another
  partitions is simply not true. That s because all programs installed
  (with the exception of an occasional trivial) have pointers to the inside
  Windows, in the registry and elsewhere, as well as associated files
  buried in the Windows folder. So if Windows, pointers and
  the files go with it. Given that the programs need to be reinstalled if Windows
  the fact, this reasoning to a separate partition for programs not
  work. In fact, there is almost never a good reason to separate
  Windows of the software application into separate partitions.

  3. a partition for the pagefile.

  Some people think mistakenly that the pagefile on another
  score will improve performance. It is also false; It doesn t
  help and often I hurt, performance, because it increases the movement of the head
  to get back to the page to another file frequently used
  data on the disk. For best performance, the paging file should normally
  be on the most widely used score of less used physical player. For
  almost everyone with a single physical disk than the same drive s
  Windows is on C:.

  4. a partition for backup for other partitions.

  Some people make a separate partition to store backups of their other
  or partitions. People who rely on a "backup" are a joke
  themselves. It is only very slightly better than no backup at all.
  because it leaves you likely to be simultaneously the original losses
  and backup for many of the most common dangers: the head crashes and other
  types of drive, serious glitches to power failure, near lightning
  strikes, virus attack, even stolen computer.  In my opinion,.
  secure backup must be on a media removable and not stored in the
  computer.

  5. a partition for data files

  Above, when I discussed separate Windows on a clean partition,
  I pointed out that separate data from Windows is a false comfort if
  He of done with the idea that data will be safe if Windows ever
  must be reinstalled. I call it a false comfort that's because
  I'm afraid many people will rely on this separation, think that their
  data are safe there and so do not take measures to
  Back it up. In truth the data is not safe there. Having to reinstall
  Windows is just one of the dangers to someone a s hard disk and not
  probably even one. This kind of "backup" falls into the same
  category, as a backup to other partitions partition; It lets you
  sensitive to the simultaneous loss of the original and the backup on many of
  the most common dangers that affect the entire physical disk, not
  just the particular partition. Security comes from a solid backup
  diet, not how partition you.

  However, for some people, it may be a good idea to separate Windows and
  programs on the one hand of the data on the other, putting each of the
  two types into separate partitions. I think that most people
  partitioning scheme must be based on their backup system and backup
  plans are generally of two types: whole hard disk imaging
  or data only backup. If you back up data, backup is
  usually facilitated by the presence of a separate with data only partition;
  to save just the score easily, without having to
  collect pieces from here and elsewhere. However, for
  those who backup by creating an image of the entire disk, there is
  usually little, if any, benefit the separation of data in a partition of
  its own.

  Furthermore, in all honesty, I must point out that there are many
  very respected people who recommend a separate partition for Windows,
  Whatever your backup plan.  Their arguments haven t convinced
  me, but there are clearly two views different here.

  6. a partition to image files

  Some people like to deal with the images and videos as something separate
  other data files and create a separate partition for them. To my
  the spirit, an image is simply another type of data and there is no
  the advantage in doing so.

  7. a partition for music files.

  The comments above related to the image files also apply to music
  files. They are just another type of data and must be dealt with the
  just like the other data.

  8. a partition for a second operating system to dual-boot to.

  For those who manage several operating systems (Windows Vista, Windows
  XP, Windows 98, Linux, etc.), a separate partition for each operating
  system is essential. The problems here are beyond the scope of this
  discussion, but simply to note that I have no objection to s
  all these partitions

  Performance

  Some people have several partitions because they believe that it
  somehow improves performance. That s not correct. The effect is
  probably low on modern computers with modern hard disks, but if
  whatever it is, the opposite is true: more music mean poorer
  performance. That's because normally no partition is full and it
  so are gaps between them. It takes time for the drive s
  read/write heads to cross these gaps. Close all files
  are, faster access to them will be.

  Organization

  I think a lot of people overpartition because they use scores as a
  organizational structure. They have a keen sense of order and you want to
  to separate the apples from the oranges on their readers.

  Yes, separating the different types of files on partitions is a
  technical organization, but then is to separate different types of
  files in folders. The difference is that the walls are static and
  fixed in size, while the files are dynamic, changing size automatically
  as needed to meet your changing needs. This usually done records
  a much better way to organize, in my opinion.

  Certainly, partitions can be resized when necessary, but except with the latter
  versions of Windows, which requires a third-party software (the and the
  possibility to do so in Windows is primitive compared to the third-party
  solutions). These third party software normally costs money and not
  any point and how stable it is, affects the entire disk.
  with the risk of losing everything. Plan your partitions in
  first place and repartitioning, none will be necessary.  The need
  to repartition usually occurs as a result of overpartitioning in
  the first place.

  What often happens when people organize with partitions instead
  records are that they make a miscalculation of how much room they need on each
  This partition, and then when they run out of space on the partition
  When a file is logically, while having plenty of space
  on the other hand, they simply saving the file in the score of "poor".
  Paradoxically, therefore, results in this kind of score structure
  less organization rather than more.

  So how should I partition my drive

  If you read what came before, my findings will not come as a
  surprise:

  1. If your backup set is the image of the entire disk, have just one
  single (usually c partition :));

  2. If you backups just data, have two partitions one for Windows and
  application programs installed (usually c :)), the other for data
  (normally D :).)

  With the exception of multiple operating systems, it is rarely
  any advantage to have more than two partitions.

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• iCal - * terminating app due to an untrapped exception 'NSInternalInconsistencyException', reason: 'this NSPersistentStoreCoordinator has no persistent store (unknown).  He is unable to perform a backup operation

  About a month after moving to OS X 10.11.3 calendar application does not load. I thought that ~/Library/Containers/com.apple.iCal deletion would empty it. I no longer get the error earlier, even if it also started with the ApplicationSpecificInformation:

  * End app because of the untrapped exception 'NSInternalInconsistencyException', reason: 'this NSPersistentStoreCoordinator has no persistent store.  He is unable to perform a backup operation

  Don't know what to do next to timing of recovery. Can someone give me some pointers?

  Thank you

  Process: Calendar [980]

  Path: /Applications/Calendar.app/Contents/MacOS/Calendar

  ID: com.apple.iCal

  Version: 8.0 (2092.2)

  Generation information: iCal-2092002000000000 ~ 70

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Manager: Calendar [980]

  User ID: 501

  Date/time: 2016-02-13 21:05:17.964-0700

  OS version: Mac OS X 10.11.3 (15 d 21)

  Report Version: 11

  Anonymous UUID: EFEF6C45-F9F8-9E0B-6C80-8622F8520537

  Time since started awake: 410 seconds

  Integrity of system protection: enabled

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Request for clarification:

  Reason for termination due to an untrapped exception 'NSInternalInconsistencyException' app,: ' this NSPersistentStoreCoordinator has no persistent store (unknown).  He is unable to perform a backup operation. »

  ending with an exception uncaught of print type

  Abort() called

  Specific application Backtrace 1:

  0 CoreFoundation 0x00007fff84644ae2 __exceptionPreprocess + 178

  1 libobjc. A.dylib 0x00007fff8a95bf7e objc_exception_throw + 48

  CoreData 0x00007fff8c524fd3 2-[NSPersistentStoreCoordinator _coordinator_you_never_successfully_opened_the_database_so_saving_back_to_it_is _kinda_hard:] + 51

  3 CoreData 0x00007fff8c5251ed-[NSPersistentStoreCoordinator _introspectLastErrorAndThrow] + 77

  4 CoreData 0x00007fff8c5253b1 __65-[NSPersistentStoreCoordinator executeRequest:withContext:error:] _block_invoke + 321

  5 CoreData 0x00007fff8c530b63 gutsOfBlockToNSPersistentStoreCoordinatorPerform + 179

  6 libdispatch.dylib 0x00007fff86f4b33f _dispatch_client_callout + 8

  7 libdispatch.dylib 0x00007fff86f4c926 _dispatch_barrier_sync_f_invoke + 74

  8 CoreData 0x00007fff8c51f662 _perform + 194

  9 CoreData 0x00007fff8c4635c5-[NSPersistentStoreCoordinator executeRequest:withContext:error:] + 533

  10 CoreData 0x00007fff8c4635f4-[NSPersistentStoreCoordinator executeRequest:withContext:error:] + 580

  11 CoreData 0x00007fff8c48e6da-[NSManagedObjectContext save:] + 890

  12 CalendarPersistence 0x00007fff9090ba47-[CalManagedObjectContext save:] + 71

  13 CalendarPersistence 0x00007fff90ab9221 + [CalPersistence createBirthdayCalendar:error:] + 251

  Calendar calendar 14 0x00000001021a5f66 + 278374

  15 calendar 0x00000001021a5852 + 276562

  Calendar calendar 16 0x00000001021a56f3 + 276211

  Calendar calendar 17 0x00000001021a54ef + 275695

  18 libdispatch.dylib 0x00007fff86f56871 _dispatch_call_block_and_release + 12

  19 libdispatch.dylib 0x00007fff86f4b33f _dispatch_client_callout + 8

  20 libdispatch.dylib 0x00007fff86f5ec1d _dispatch_main_queue_callback_4CF + 1685

  21 0x00007fff8458acd9 __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 9 CoreFoundation

  22 CoreFoundation 0x00007fff84545d3d __CFRunLoopRun + 1949

  23 CoreFoundation 0x00007fff84545338 CFRunLoopRunSpecific + 296

  24 HIToolbox 0x00007fff85f26935 RunCurrentEventLoopInMode + 235

  25 HIToolbox 0x00007fff85f2676f ReceiveNextEventCommon + 432

  26 HIToolbox 0x00007fff85f265af _BlockUntilNextEventMatchingListInModeWithFilter + 71

  27 AppKit 0x00007fff892a60ee _DPSNextEvent + 1067

  28 AppKit 0x00007fff89672943-[NSApplication _nextEventMatchingEventMask:untilDate:inMode: dequeue:] + 454

  AppKit 29 0x00007fff8929bfc8-[NSApplication run] + 682

  30 AppKit 0x00007fff8921e520 NSApplicationMain + 1176

  Calendar calendar 31 0 x 0000000102164027 + 8231

  32 libdyld.dylib 0x00007fff81d985ad start + 1

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 libsystem_kernel.dylib 0x00007fff8c43f002 __pthread_kill + 10

  1 libsystem_pthread.dylib 0x00007fff8fea85c5 pthread_kill + 90

  2 libsystem_c.dylib 0x00007fff952726e7 demolition + 129

  3 libc ++ abi.dylib 0x00007fff833d6f81 abort_message + 257

  4 libc ++ abi.dylib 0x00007fff833fca47 default_terminate_handler() + 267

  libobjc 5. A.dylib 0x00007fff8a95e6ae _objc_terminate() + 103

  6 libc ++ abi.dylib 0x00007fff833fa19e std::__terminate (void (*) ()) + 8

  7 libc ++ abi.dylib 0x00007fff833fa213 std::terminate() + 51

  8 libdispatch.dylib 0x00007fff86f4b353 _dispatch_client_callout + 28

  libdispatch.dylib 9 _dispatch_main_queue_callback_4CF + 1685 0x00007fff86f5ec1d

  10 com.apple.CoreFoundation 0x00007fff8458acd9 __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 9

  11 com.apple.CoreFoundation 0x00007fff84545d3d __CFRunLoopRun + 1949

  12 com.apple.CoreFoundation 0x00007fff84545338 CFRunLoopRunSpecific + 296

  13 com.apple.HIToolbox 0x00007fff85f26935 RunCurrentEventLoopInMode + 235

  14 com.apple.HIToolbox 0x00007fff85f2676f ReceiveNextEventCommon + 432

  15 com.apple.HIToolbox 0x00007fff85f265af _BlockUntilNextEventMatchingListInModeWithFilter + 71

  16 com.apple.AppKit 0x00007fff892a60ee _DPSNextEvent + 1067

  17 com.apple.AppKit 0x00007fff89672943-[NSApplication _nextEventMatchingEventMask:untilDate:inMode: dequeue:] + 454

  18 com.apple.AppKit 0x00007fff8929bfc8-[NSApplication run] + 682

  19 com.apple.AppKit 0x00007fff8921e520 NSApplicationMain + 1176

  20 com.apple.iCal 0 x 0000000102164027 0 x 102162000 + 8231

  21 libdyld.dylib 0x00007fff81d985ad start + 1

  Thread 1:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Thread 2: Dispatch queue: com.apple.libdispatch - Manager

  0 libsystem_kernel.dylib 0x00007fff8c43fff6 kevent_qos + 10

  1 libdispatch.dylib 0x00007fff86f51099 _dispatch_mgr_invoke + 216

  2 libdispatch.dylib 0x00007fff86f50d01 _dispatch_mgr_thread + 52

  3 wire:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Thread 4:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Wire 5:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Line 6:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Line 7:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Thread 8:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Wire 9:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Thread 10:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Wire 11:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  12 wire:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Line 13: com.apple.NSEventThread

  0 libsystem_kernel.dylib 0x00007fff8c439386 mach_msg_trap + 10

  1 libsystem_kernel.dylib 0x00007fff8c4387c7 mach_msg + 55

  2 com.apple.CoreFoundation 0x00007fff84546624 __CFRunLoopServiceMachPort + 212

  3 com.apple.CoreFoundation 0x00007fff84545aec __CFRunLoopRun + 1356

  4 com.apple.CoreFoundation 0x00007fff84545338 CFRunLoopRunSpecific + 296

  5 com.apple.AppKit 0x00007fff89365065 _NSEventThread + 149

  6 libsystem_pthread.dylib 0x00007fff8fea6c13 _pthread_body + 131

  7 libsystem_pthread.dylib 0x00007fff8fea6b90 _pthread_start + 168

  8 libsystem_pthread.dylib 0x00007fff8fea4375 thread_start + 13

  Thread 14:

  0 libsystem_kernel.dylib 0x00007fff8c43f6de __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff8fea6729 _pthread_wqthread + 1283

  2 libsystem_pthread.dylib 0x00007fff8fea4365 start_wqthread + 13

  Thread 15: com.apple.appkit - heartbeat

  0 libsystem_kernel.dylib 0x00007fff8c43f206 __semwait_signal + 10

  1 libsystem_c.dylib 0x00007fff95293d17 nanosleep + 199

  usleep libsystem_c.dylib 2 0x00007fff95293c0a + 54

  3 com.apple.AppKit 0x00007fff894ff6f4-[NSUIHeartBeat _heartBeatThread:] + 2181

  4 com.apple.Foundation 0x00007fff92cbdc6f __NSThread__start__ + 1351

  5 libsystem_pthread.dylib 0x00007fff8fea6c13 _pthread_body + 131

  6 libsystem_pthread.dylib 0x00007fff8fea6b90 _pthread_start + 168

  7 libsystem_pthread.dylib 0x00007fff8fea4375 thread_start + 13

  Thread 0 crashed with X 86 State of Thread (64-bit):

  Rax: 0 x 0000000000000000 rbx: 0000000000000006 rcx 0 x: 0x00007fff5da9be28 rdx: 0 x 0000000000000000

  RDI: 0x000000000000160b rsi: 0 x 0000000000000006 PBR: RER 0x00007fff5da9be50: 0x00007fff5da9be28

  R8: 0 x 0000000000000003 r9: 0x00007fff833fda7c r10: 0 x 0000000008000000 r11: 0 x 0000000000000206

  R12: 0x00007fff5da9bfb0 r13: 0x0000000103001b40 r14: 0x00007fff746a1000 r15: 0x00007fff5da9be90

  RIP: 0x00007fff8c43f002 rfl: 0 x 0000000000000206 cr2: 0x00007fff7554a008

  Please, back up all data. If you have iCloud calendars, archive them by following the instructions on this page under the heading "download a calendar of iCloud.com." all you need is a web browser, not the calendar application. Do the same with the other calendars of network you have, if possible.

  Before taking each of these steps, quit (leave by force if necessary) application. After taking stage, recovery and test. When the problem is solved (or when you have completed step 3 without resolving), stop and close the library folder.

  Step 1

  Hold down the option key and select

  Go ▹ library

  in the Finder menu bar. In the folder that opens, move these items (some may not exist) to the trash, leaving the open library folder:

  Calendars/calendar Cache

  Calendars/calendar Cache-shm

  Calendars/calendar Cache-wal

  Step 2

  Move these files to the library folder on the desktop (even once, some cannot exist):

  Containers/com.apple.CalendarAgent (and all others with a start of name in 'com.apple.Calendar')

  Containers/com.apple.iCal (and all others with a name in 'com.apple.iCal' beginning)

  Preferences/com.apple.CalendarAgent.plist

  Preferences/com.apple.iCal.plist

  If the problem is resolved, you may be able to put some of the items you have moved in this stage, recovery and testing after each of them. Finally, you can find the one that caused the problem; Delete it. Re-create your settings if necessary.

  If the problem is not yet solved, put back to each of the points you have moved in this step, crushing the that may have been created in its place. Do not put the files that you moved in step 1.

  Step 3

  Move this folder on the desktop:

  Calendars

  Note: you do not move the application to calendars; you move a folder named "calendars". If there is no change, put the folder back where he was.

  If the problem is resolved after you move the calendars folder, the event database is corrupted. You have these choices:

  Restore the snapshot folder Time Machine or another backup prior to corruption.

  Use a third party application like "Calendar cleaner" (not tested by me) to try to repair the database.

  For the calendar network accounts, such as iCloud, all you need to do is re-enter the preferences. For subscribed calendars, simply re - subscribe.

• Time Machine don't prune the old El Capitan backups and works out of space and "backup fails.

  With the help of El Capitan 10.11.1, I noticed a change in behavior with the handling of the time Machine of large files, specifically the files of virtual disk VMWare Fusion (about 50 large concerts).  After a few weeks of use of fusion VM virtual machine, Time Machine gives an error where it ran out of space and "backup failed."

  I had the same problem occur on a second iMac that I own.

  I reformatted my external drive for Time Machine and started fresh, but after a few weeks, I got the same error again.  It seems that Time Machine is not the size or remove older backups of VMware virtual disk to provide a space for the new.

  Previous versions of Mac OS X and Time Machine had no problem with the backup of large files such as these.

  Has anyone else noticed "backup failed" message with Time Machine on El Capitan?  I know that I can exclude the disk virtual VMware backup, but that defeats the entire purpose of Time Machine backups.  Any suggestions?

  Time Machine automatically deletes older snapshots to make room for the new. If your backup history is shorter than expected, it may be because you want to save one or more large files frequently.

  Software virtualization VMware, Parallels or VirtualBox creates a large virtual disk container that is constantly evolving. It will not be saved at all while the virtual machine running, and at other times it must be saved each Time Machine performance. Who fills up quickly any backup destination.

  You must exclude files from virtual drive of your Time Machine backups. To do this, click the Options button in the Time Machine preferences window. You can also do this to virtualization, application settings. Back up the files on the virtual disk within the comments system, using a native backup application.

  A compromise solution is to create a 'snapshot' of the virtual machine in the virtualization software (not a Time Machine snapshot.) This will give you a single large file that never changes and only has to be saved once. All future changes will be stored in a file that is much smaller initially, but will grow over time. You must always exclude this backup TM file. If you need to restore the computer virtual of Time Machine, you will have a working configuration, which will be easy for you to restore the rest of the data in the system of comments.

  See also this page of Parallels support.

• HP Pavilion p6-2494ea: slow performance and error messages

  

  Lately my computer has been boring performance issues. My hard drive has begun to be active at 100% and I get messages from RunDLL since I updated my computer Windows 8 to 8.1 Windows. I continued to get three of these messages, but since I updated to Windows 10 I started to get only two of them. I do not know how to solve these two problems that I tried every internet forum and youtube tutorial to solve this problem, but it didn't seem to fix the problem.

  Any advice is much appreciated!

  @MW_H : Please write your request here!

  Click on the link that is re-directed to the Microsoft technical support where you can install a program that runs automatically to fix or repair the .dll files below

  http://HP.care/2bDpNdf

  And to improve the performance of the PC, please visit

  http://HP.care/2bFDPcU

  I would like to know if it works. See you soon!

• Problem with RUNDLL and sthelp.dll.

  I have windows XP on a small Dell Inspiron.  When I start a dialog box titled 'RUNDLL' appears and has the following message: "error loading: C:\Documents and Settings\...\Application Data\sthelp.dll.» The specified module could not be found. "I downloaded Malware Bytes and run a full scan - it found nothing.  I have been devoted to the application of msconfig, clicked on the Startup tab and tried to disable the checkbox where this dll is called upward, but the operating system seems to want to find when they start the computer.  What can I do to get rid of this nuisance? When I close this dialog (RUNDLL), the computer works fine... it is every time at startup.  Any help would be appreciated.

  There is no XP file called stehelp.dll and Googling, there is nothing reasonable and a bunch of bad ideas.

  Looks like it's a vestige of some malware that has been partially removed from your unspecified brand system and the model with the specified, unspecified XP Service Pack version and not specified where the antivirus/antimalware applications.

  These message types are quite common things to do after that some malware was only partially removed FRO your system, so I suggest the following:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns
  .  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry.  There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html

  Consider making a manual, just System Restore Point in case you have to undo the changes.

  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Do a complete analysis from time to time when you have more time (in hours).

  They can be uninstalled later if you wish.

  The scans by operating clean, restart, and then fix any problems.