Two updated reports on a single Page

Similar Questions

• update report dynamically? (without page refresh)

  I have a page with several regions, and that a region is visible at a time. Each region contains a report as well as a drop down menu to change the data displayed in the report. Currently, whenever a value drop-down list is changed he submits the page, causing the "main area" to become visible because it is set by default to display first.
  
  Is there a basic tutorial I can follow on how to dynamically upgrade report output without a page refresh?
  
  Thank you
  Steve

  Steve wrote:
  I have a page with several regions, and that a region is visible at a time. Each region contains a report as well as a drop down menu to change the data displayed in the report. Currently, whenever a value drop-down list is changed he submits the page, causing the "main area" to become visible because it is set by default to display first.

  Is there a basic tutorial I can follow on how to dynamically upgrade report output without a page refresh?

  The best way to do this is by using dynamic measurements. Create a dynamic refresh action for each region that runs when the associated select list is changed:
  H4. When

  Event: change
  Selection type: item (s)
  Article (s):
  H4. Real Action

  Action: update
  Fire when the Page loads: Yes or no according to your application requirements
  Region:

  Ensure that the value of the associated selection list is submitted in session before the update state by indicating this in Page items to be submitted in the Source section of the region of report definition.

  There is some action on the Oracle Learning Library tutorials. Specifically refreshment in the abstract, so may not indicate this precisely, but it is an introduction to dynamic actions in general.

  (It's probably possible to create a single dynamic action to manage the updating of all regions: we need the complete details of your application, reproduction preferably it or a simplified on apex.oracle.com.)

• How to have two Interactive reports on the same page.

  Hello
  I have a requirement where I need to have two interactive reports in a page where the user can select lines in the two reports by a line selector & send the page to the transformation.
  
  Please let me know is direct or workaround for this problem at the APEX 3.1.
  
  Thanks in advance.

  Hello

  Apex do not support having more than one IR on the page.
  See this post for circumvention of blob Roels
  http://roelhartman.blogspot.com/2009/03/two-interactive-reports-on-one-page.html

  Kind regards
  Jari

• Several interactive reports on a single page?

  I use interactive reports in a few places in an APEX application. I find them valuable as a kind of "generator" that the user can do a lot with.
  On a particular page, I have a radio button, offering to the user two possibilities. As one that they select, I want to show another interactive report. Each of them running different SQL with different number of columns.
  By default I can't do that in APEX 3.1.2 - when I try to add the second I get the message + "interactive report already exists on the page...". "You can only add an interactive report by page +".
  I tried to set the view state so that one wouldn't show, but I'm still not allowed to create the second.
  I guess I could create a branch to two different pages, depending on radio button option the user selects, but the option box is one of a few other entries form I need of the user, the other being a few dates and selections from drop-down list box.
  I want to keep these elements form visible above the interactive report, and I do not know how if I'm leaving braching to different pages for interactive report.
  
  Hope this makes sense to someone...
  Thank you.

  The best way we found to include several Irs on one page is to copy... Either in the same page or on another page. When copying IR #2, we had the condition for IR #1 set to NEVER. Viewing the report of your choice can be done either by defining a list of radio with submit and conditional display for each report, or by allowing end users to customize the page, with a single report is displayed by default.

  I hope this helps.

  Vojin

• Passage of a setting for two different queries on a single page

  I followed tutorial ADF - value of the parameter passing between Pages. It works very well, but I tried to add a second query to the page single.jspx , using the same setting and it shows all the data.

  I tried to analyze the queries and the problem is in bind variables. While the first query gets the right value, the second Gets null (see the log below). I also noticed that if I return to the single.jspx page, only the first request is executed.

  < oracle.adf.model > < ViewObjectImpl > < buildQuery > < [3556] SELECT ServiceRequests.ASSIGNED_DATE,.

  ServiceRequests.ASSIGNED_TO,

  ServiceRequests.CREATED_BY,

  ServiceRequests.PROBLEM_DESCRIPTION,

  ServiceRequests.PROD_ID,

  ServiceRequests.REQUEST_DATE,

  ServiceRequests.STATUS,

  ServiceRequests.SVR_ID

  OF SERVICE_REQUESTS ServiceRequests

  WHERE (ServiceRequests.SVR_ID =: p_svr_id) >

  < oracle.adf.model > < ViewObjectImpl > < getPreparedStatement > < ViewObject [3557]: [oracle.srdemo.model.ServiceRequestById_VO] AppModule.ServiceRequestById_VO1 created new QUERY statement >

  < oracle.adf.model > < ViewObjectImpl > < bindParametersForCollection > < [3558] params for ViewObject Bind: [oracle.srdemo.model.ServiceRequestById_VO] AppModule.ServiceRequestById_VO1 >

  < oracle.adf.model > < OracleSQLBuilderImpl > < bindParamValue > < [3559] param 'p_svr_id' liaison: 111>

  < oracle.adf.model > < ViewObjectImpl > < buildQuery > < [3716] select svh_date, service_histories where svr_id =: p_svr_id order of svh_date >

  < oracle.adf.model > < ViewObjectImpl > < getQueryHitCount > < [3717] number of rows estimated for ViewObject: [oracle.srdemo.model.ServiceHistoryByRequestId_VO] AppModule.ServiceHistoryByRequestId_VO1, query statement: >

  < oracle.adf.model > < ViewObjectImpl > < getQueryHitCount > < [3718] ' SELECT count (1) FROM (select svh_date, notes from service_histories where svr_id =: p_svr_id order of svh_date) ">"

  < oracle.adf.model > < ViewObjectImpl > < getQueryHitCount > < [3719] Bind params for ViewObject.getQueryHitCount: ServiceHistoryByRequestId_VO1 >

  < oracle.adf.model > < ViewRowSetImpl > < doSetWhereClauseParam > < [3720] ServiceHistoryByRequestId_VO1 ViewRowSetImpl.doSetWhereClause(-1, p_svr_id, null) >

  < oracle.adf.model > < OracleSQLBuilderImpl > < bindParamValue > < [3721] null of type 12 for connection "p_svr_id" > ""

  I got it.

  I need to add an another ExecuteWithParams of the request on the other in the pageflow.

• Bug: Editor two different view on a single page?

  Hi all

  I use WebCenter Portal 11.1.1.8 and I encountered a problem with the page execution on space (Webcenter Portal). I created a new portal with the default parameter and create a new page with the name is "New Page" with the Style of the blank Page and ID = "newpage". In the Source tab, I see code like this:

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < = xmlns:jsp jsp:root ' http://Java.Sun.com/JSP/page "xmlns:pe =" " http://xmlns.Oracle.com/ADF/PAGEEDITOR "cust =" http://xmlns.Oracle.com/ADF/faces/customizable "xmlns:f =" http://Java.Sun.com/JSF/Core "xmlns:trh =" http://MyFaces.Apache.org/Trinidad/html "xmlns:af =" http://xmlns.Oracle.com/ADF/faces/Rich "version ="2.1"> " "" ""

  < jsp:directive.page deferredSyntaxAllowedAsLiteral = "true" / >

  < jsp:directive.page contentType = text/html"; charset = utf - 8 "/ >

  < f: view >

  < af:document title = "#{pageDocBean.title}" id = "docrt" > "

  < f: facet name = "metaContainer" >

  < trh:meta name = "keywords" content = "#{bindings." SEO_KEYWORDS} "/ >"

  < / f: facet >

  < af:form usesUpload = "true" id = "f1" >

  < af:pageTemplate value = "#{bindings.shellTemplateBinding.templateModel}" id = "T" > "

  < f: facet 'content' = name >

  < pe: pageCustomizable id = "PGE1" >

  < af:panelGroupLayout id = "pgl1" layout = "scroll" styleClass = "WCSchemeCustom" inlineStyle = "" >

  < cust:panelCustomizable id = rendered = "#{bindings.showHeader"hm_pnchdr"}" layout = "vertical" showTabAction = "true" / > "

  < af:panelGroupLayout id = "pgl2" layout = "vertical" styleClass = "AFStretchWidth" >

  <trh:tableLayout id = 'tl1' width = '100% ' >

  < trh:rowLayout id = "rl1" >

  "< trh:cellFormat id ="cf1"rendered =" #{bindings.leftWidth! = "and bindings.leftWidth! =" 0% "}" width = "#{bindings.leftWidth}" valign = "top" >

  < cust:panelCustomizable id = "hm_pnc1" layout = "scroll" showTabAction = "true" / >

  < / trh:cellFormat >

  "< trh:cellFormat id ="cf2"rendered =" #{bindings.centerWidth! = "and bindings.centerWidth! =" 0% "}" width = "#{bindings.centerWidth}" valign = "top" >

  < cust:panelCustomizable id = "hm_pnc2" layout = "scroll" showTabAction = "true" / >

  < / trh:cellFormat >

  "< trh:cellFormat id ="NF3"rendered =" #{bindings.rightWidth! = "and bindings.rightWidth! =" 0% "}" width = "#{bindings.rightWidth}" valign = "top" >

  < cust:panelCustomizable id = "hm_pnc3" layout = "scroll" showTabAction = "true" / >

  < / trh:cellFormat >

  < / trh:rowLayout >

  < / trh:tableLayout >

  < / af:panelGroupLayout >

  < cust:panelCustomizable id = rendered = "#{bindings.showFooter"hm_pncftr"}" layout = "vertical" showTabAction = "true" / > "

  < / af:panelGroupLayout >

  < f: facet name = "Publisher" >

  < pe: pageEditorPanel id = "pep1" / >

  < / f: facet >

  < / pe: pageCustomizable >

  < / f: facet >

  < / af:pageTemplate >

  < / af:form >

  < / af:document >

  < / f: view >

  < / jsp:root >

  You pay attention to the red line. Here you can see the body of the page, we have 3 columns.

  If you click on the Edit link, you will still see the page in edit mode with 1 single column in the middle (this is normal).

  In the tree view of pages, I create a new link object has ID = "newlink" The link is to 'New Page'.

  (a) arrived to the New Page , I click on the view link to see the page on the portal and then press Ctrl + Shift + E to go into edit mode and here I saw that it is normal with 1 single column in the middle of the page.

  (b) after that, I try to go to the New Page in another way with the link , I create above. And I always display the normal News Page . But when I press Ctrl + Shift + E to go into edit mode, I saw another screen, not like the screen I saw in step a. "We have 3 column in the middle of the page"?

  
  

  You have an idea about this?

  Thank you very much!

  Post edited by: AS84

  Yes, I see the same question in WebCenter Portal 11.1.1.8.6 but switching back and forth between a Page and PageLink cope (via Ctrl + Shift + E) - began to show a box or a column by the suite and the issue is not seen any more that it overrides the settings of the page.

  Another option that I tried and it works for me. Steps are the following:

  Create a copy of the blank Page Style

  Click on change the Source

  Delete the columns or the code for leftWidth and rightWidth ONLY that resembles

  NOTE: Do NOT remove the centerWidth.

  ----------------------

  ----------------------

  Now, create a new page (say MyNewBlankPage) using 'Copy of the blank Page Style' with all the default options (left: 0%, Center: 100%, right: 0%)

  Then, create a new Page link pointing to "MyNewBlankPage" with the value of the parameters as the left: 25%, Center: 50%, right: 25% and click Save

  Show portal, access MyNewBlankPage and press Ctrl + Alt + E for edit to new message and now you will see only 1 box or column of composer.

  Return to the view portal, access the link to the MyNewBlankPage page and press Ctrl + Alt + E to edit the composer. Again, you will see only 1 box or to the composer instead of 3 boxes or 3 columns (i.e. it is not replacing the Page settings when I used the new style (based on the Style of the Page blank) page in which I had removed left & right columns.)

  Also, it seems that this problem is resolved in 11.1.1.9.0 that I am not able to reproduce it.

• Two Select lists with Submit single page branching to different page each?

  Hi all
  
  I have a page (No. 1) with two 'select list with Submit"(A and B). This page contains also two branches defined. I want to realize that the first list selection with present (A) would always use the first branching (at page n ° 2) and the select list a second with the submit (B) would use the second fork (at page no. 3).
  
  How can I achieve this? Y at - it a tutorial describing lists of selection and the ramifications?
  
  Thank you for your time.
  
  Daniel

  When the selection list submits the page, the value of "motion" is the name of the selection list item. So all you need to do is add a condition to each Directorate-General: Request = Expression 1 and enter the name of the element (top) in the field of 1 the condition Expression.

  Scott

• Error update of two reports on the same page! Could you please have a look?

  Hey guys!
  
  I have the following situation:
  
  two updated reports on a single page with ID "DATE_REPORT" and "WORK_REPORT".
  two processes of pl/sql on submit after named 'SUBMIT_DATE' and 'SUBMIT_WORK' c...
  two buttons named 'SAVE_DATE' and 'SAVE_WORK '.
  Finally, the process of the insert and update are conditioned to a request = 1 where for the "DATE_REPORT" Expression, it is set to 'SAVE_DATE' and 'WORK_REPORT', it's logically on 'SAVE_WORK '. There is no condition extra button.
  
  My problem: I press any button, the table is accumulation in the columns of the first report and continues to add lines of the second report.
  
  For example: "DATE_REPORT" has 11 lines and "WORK_REPORT" has 9 lines. In debug mode, I see that the picture is piling using the 'DATE_REPORT' although 'SAVE_WORK' has been accepted as a demand. The same problem vice versa for the other update.
  

  ......column CNT_ARBEIT_CRIT_DATE mapped to WWV_Flow.g_f02
  ......column LNG_ARBEITSSCHRITT mapped to WWV_Flow.g_f03
  ......column STR_ARBEITSSCHRITT not mapped - not stateful.
  ......column DATE_GP_X_START mapped to WWV_Flow.g_f04
  ......column DATE_GP_X_END mapped to WWV_Flow.g_f05
  ......column DATE_R_X_START mapped to WWV_Flow.g_f06
  ......column DATE_R_X_END mapped to WWV_Flow.g_f07
  ......column LNG_GEBIET mapped to WWV_Flow.g_f08
  ......column CS not mapped - not stateful.
  ...array has 20 row(s). Used f08 to count.
  
  Validate report columns(ApexLib_TabForm.validateColumns)
  Row 12 has checksum error. ORA-01403: no data found ORA-01403: no data found ORA-01403: no data found
  ...Row 12
  ...LNG_ARBEITSSCHRITT
  ...CNT_ARBEIT_CRIT_DATE
  ......is not required
  ...LNG_GEBIET
  ......is not required
  ...DATE_GP_X_START
  ......is not required
  ...DATE_GP_X_END
  ......is not required
  ...DATE_R_X_START
  ......is not required
  ...DATE_R_X_END
  0.00: A C C E P T: Request="SAVE_WORK"

  How can I make sure that the tables are made from the reports which are the subject of the update?
  
  Thank you very much for reading this post and give help if you have an idea!
  
  Kind regards
  
  SEB
  
  Published by: skahlert on 13.03.2010 10:57

  Hi Sebastian,.

  what you want to achieve is indicative of the browser not to send the region A fields when you want to commit region B.

  You have several options:

  (1) do not make the region all the (conditions of the region)
  (2) send any content and to ignore the lines of region A in your area of PL/SQL
  (3) the region has to withdraw before submitting the page (for example with jQuery: jQuery("#__).remove())

  But maybe you should start by rethinking your application, do you really want 2 different TabForms on a single page.

  Peter

  + Blog: http://www.oracle-and-apex.com+

• Printing of multiple numbers of document/picture on a single page

  I have a separate document for each week of the year, each document has a worksheet in it. I would like to print the worksheets in each document, but want to put more than one of them on a page. Is this possible? So far, I can only print each individual worksheet... Thanks for the tips!

  Hi pmgw,

  I don't know any way to print a table of two separate documents on a single page in a single step. There are several ways to do this using multiple steps.

  1. You can configure individual documents so that the tables you want to place on the printed page even alternate position on their leaves, 1 week at the top, 2 bottom, week 3 on top, etc.
     Two consecutive weeks can then be printed on a single page by printing the first, reinserting the page into the printer using the same orientation *, then print the second.
  2. Open the documents numbers during the two weeks that you want to print.
     In the second, select the table to print. Copy.
     Switch to the first. Click on an empty space on the map. Dough.
     Drag the table glued in position. Print.
     (optional) Select the pasted table and press DELETE.
  3. Open a document of 'Blank canvas' pages.
     Open documents from figures for the two weeks that you want to print.
     Copy and paste the table of each document numbers in the Pages of the document.
     Print.

  Notes:

  Second printing works - Orientation: the best way to ensure that the document is oriented the same for the two rounds is to place a light pencil mark near the center of the edge of the paper closest to you when it is in the tray. After the first run, replace the paper in the tray with the pencil mark in the same position. U

  Table selection: to select an entire table, you can place the mouse pointer on an outer border of the table. When the pointer icon changes to a line crossed by a two-headed arrow, click to select the entire table. Or click the table icon in the sidebar (Numbers ' 09). None of these methods to select a table to move or copy.

  Or (once) click any cell in the table, and then press command + A to select all. Use this method to copy the contents of the table. When glued, the result is the same as copy and paste by using the first two methods.

  The use of the Pages: the advantage of paste tables into Pages is an easier control of the appearance of the printed page. If you do this often, I would say adding guides to layout of the document Pages indicating where to place both calendars, and then deleting the calendars (leaving the guides) and save the document as a template.

  Kind regards

  Barry

• Ability to print the 2 pictures on a single page?

  Is it possible to print several different (shooting) photos on a single page in the print module.  I can't find anything in the help files for LR3.  I know I can do multiples of the same photo, but I want two different shots on a single page.

  Thanks for your help.

  Paula

  In fact, you can drag as many photos as you can on the model. I put

  a model of 19 shots, one a day

  Pre

  Right panel, choose 'Custom Package' and drag your photos from the

  Filmstrip in the model.

  >

• Updated interactive report based on shuttle Page

  I am trying to create an interactive report based on the selected items in a shuttle service.  On the page there is a page entitled P2_ITEMS element which is a shuttle service.  It displays a list of items for the user to choose and returns the item_id, the primary key of the main table.  I then an interactive report on the same page that displays data for the item_ids selected in the shuttle.  I use the sql query below in my interactive report, but nothing shows up in my report.  How can I get the interactive report to be updated when items are selected in the shuttle?

  Select

  a.date_loaded,

  b.item_type,

  c.Item,

  a.info

  point a, item_type_lookup b, item_name_lookup c,.

  where instr (': ' |: P251_ITEMS |': ',' :'|| a.item_id |': ') > 0

  and a.item_type_id = b.item_type_id

  and a.item_name_id = c.item_name_id;

  Hello

  Please, install application example sample Dynamic Actions. There are exactly what you are looking for (side Server-online shuttle refresh).

  Kind regards

  Pavel

• I have two docs pdf I used Acrobat to convert word documents.  How can I extract a single page of a doc to be inserted into the other doc?

  I have two docs pdf that I converted into Word using Acrobat Pro documents.  How to extract a single page of the first RFSO and insert it into the second doc?  When I "select all" he seized the entire document.  I need to take pages, other pages and change some of the text.

  HI djlarp,

  Try to triple - click the text you want to select - it can sometimes be difficult to select text in a document converted. If this does not work, it could be that the PDF document is created from a scanned document and OCR is not enabled when you converted the document. (However, OCR is activated by default when converting via ExportPDF site.)

  If you are unable to select text by triple-click, let us know. I'd be happy to look more closely at your files.

  Best,

  Sara

• Update a single page

  Is it possible to simply update a single page in an article instead of the whole article?

  The smallest unit that we update is an article.

  Neil

• Report showing only a single page

  There is a report that shows only a single page. Remaining records are not displayed.
  Please let me know if any need to be changed/checked for this.
  
  Thank you

  OOPS... did!

  Try seting "object printed on" extensible framework "by default".

• How to do a partial update of a form and a report on the same page?

  Hi all

  Im trying to make a page where you have a report on the top, and when you click on the link instead go to the form page, the form on the page is on the bottom of the report. Let's say that im trying to send an id from the report to the item below so that I could go get the rest of the element. However when I pass, other elements would still refer to it as null.

  If I am not wrong it could be done with the quote, but I want it to be partial refresh...

  I tried the steps detailed here, but it didn't work when the lower part is an also a report:

  https://forums.Oracle.com/thread/2345863

  I also tried, but this actually submits a page...

  Base Oracle: Tutorial Apex - form & amp; Report shares the same page

  would it not possible to get a form and a report in a partial refresh page?

  Post edited by: T101_cyberdyne

  Hello

  Do you mean something like this:

  http://Apex.Oracle.com/pls/Apex/f?p=vincentdeelen:26:26

  If so, you must create a dynamic action with a javascript action to set the id of the report line in the form of code field and further action from pl/sql to retrieve the record based on the identification number. You can use this record to set the shape of other items in the field.

  For the example in the link above, the code is as follows.

  action of javascript:

  var empno = $(this.triggeringElement).find('td[headers="EMPNO"]').text)

  $s ('P26_EMPNO', empno)

  action of PL/SQL:

  declare

  cursor c_emp is

  Select * from EMP

  where empno =: p26_EMPNO;

  BEGIN

  for r_emp looping c_emp

  APEX_UTIL. SET_SESSION_STATE ('P26_ENAME', r_emp.ename);

  APEX_UTIL. SET_SESSION_STATE ('P26_JOB', r_emp.job);

  APEX_UTIL. SET_SESSION_STATE ('P26_MGR', r_emp.mgr);

  APEX_UTIL. SET_SESSION_STATE ('P26_HIREDATE', to_char (r_emp. HireDate, 'dd-mon-yyyy'));

  APEX_UTIL. SET_SESSION_STATE ('P26_SAL', r_emp. SAL);

  APEX_UTIL. SET_SESSION_STATE ('P26_COMM', r_emp.comm);

  APEX_UTIL. SET_SESSION_STATE ('P26_DEPTNO', r_emp. DEPTNO);

  APEX_UTIL. SET_SESSION_STATE ('P26_ORDNO', r_emp.ordno);

  end loop;

  END;

  Make sure you list the item id in the field "Page of Items to submit" and ALL your form elements in the field "Page of Items of return" as follows:

  http://www.vincentdeelen.com/images/OTN/plsql_action.PNG

  A screenshot of the configuration of dynamic action:

  http://www.vincentdeelen.com/images/OTN/dynamic_action.PNG

  Kind regards

  Vincent