Type of data digital digits are resized to the entire part

Similar Questions

• 10 Windows: Open Windows are resized when the lid is closed

  I just do the Windows 10 Pro free upgrade. Everything seems to work very well; except for this problem.

  Whenever I simply close and re - open the lid of the portable computer, open windows are resized.

  Most of the windows are restored to where they started, but they seem to ALL have been resized and then sized to their previous location. You can tell because that minimize / restore windows can't remember the last full size you used.

  But some Windows DO NOT get resized back where I left off. Chrome in some crazy. Sometimes, the window is maximized; and other times it gets sized to a smaller rectangle at the top left of the screen.

  You can see all windows sparkle and jumping around when you open the lid.

  ... My laptop is a ThinkPad W540.

  MsInfo32:

  Name of the OS Microsoft Windows 10 Pro
  Version 10.0.10240 Build 10240
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  COCOTPW540 system name
  The LENOVO system manufacturer
  System model 20BG0016US
  System Type x 64-based PC
  System SKU LENOVO_MT_20BG
  Processor Intel Core i7-4800MQ 2.70 GHz, 2694 Mhz, 4 Lossnay, 8 logical processors
  BIOS Version/Date LENOVO GNET73WW (2.21), 12/03/2015
  SMBIOS Version 2.7
  Embedded Controller Version 1.11
  BIOS Legacy Mode
  Manufacturer LENOVO Baseboard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "10.0.10240.16392".
  CocoTpW540\Steven user name
  Eastern Daylight Time zone
  Physical memory (RAM) installed 8.00 GB
  7.62 GB total physical memory
  4.08 GB available physical memory
  8,81 GB total virtual memory
  4.93 GB available virtual memory
  Page file space 1.19 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  Components / Display:

  Name NVIDIA Quadro K2100M
  Device ID PNP PCI\VEN_10DE & DEV_11FC & SUBSYS_221E17AA & REV_A1\4 & 23A 19969 & 0 & 0008
  Adapter Type Quadro K2100M, NVIDIA compatible
  Adapter Description NVIDIA Quadro K2100M
  Bytes of RAM (2 147 483 648) adapter
  Installed Drivers nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um, nvwgf2um
  10.18.13.5362 driver version
  File INF oem86.inf (section Section040)
  Color of the aircraft not available
  Color not available Table entries
  No available resolution
  Bits/Pixel is not available
  0xB0000000-0xB10FFFFF memory address
  Address memory 0 x 80000000-0x91FFFFFF
  Address memory 0 x 90000000-0x91FFFFFF
  Port of e/s-0x00004F80-0x00004FFF
  IRQ channel, IRQ 4294967289
  Driver c:\windows\system32\drivers\nvlddmkm.sys (10.18.13.5362, 10.63 MB (11,142,984 bytes), 23/07/2015 04:02)

  Name of the graphics card Intel (r) HD 4600
  ID device PNP PCI VEN_8086 & DEV_0416 & SUBSYS_221E17AA & REV_06\3 & 21436425 & 0 & 10
  Compatible adapter Type Intel(r) HD Graphics Family, Intel Corporation
  Adapter Description Intel(r) HD Graphics 4600
  Adapter RAM 1.00 GB (1 073 741 824 bytes)
  Installed drivers igdumdim64.dll, igd10iumd64.dll, igd10iumd64.dll, igd12umd64.dll, igdumdim32, igd10iumd32, igd10iumd32, igd12umd32
  10.18.15.4256 driver version
  File INF oem76.inf (section iHSWM_w10)
  Color of the aircraft not available
  4294967296 colors Table entries
  Resolution 2880 x 1620 x 50 hertz
  32 bits/Pixel
  0xB1400000-0xB17FFFFF memory address
  0xA0000000-0xAFFFFFFF memory address
  IO port 0 x 00005000-0x0000503F
  IRQ channel, IRQ 4294967290
  Port of e/s-0x000003B0-0x000003BB
  Port of e/s-0x000003C0-0x000003DF
  Address 0xA0000-0xBFFFF
  Driver c:\windows\system32\drivers\igdkmd64.sys (10.18.15.4256, 6.09 MB (6 389 688 bytes), 18/07/2015-12:36 AM)

  Hah!

  It's probably a bug; but something made the stop switch resolution:

  In the display settings, I put the scale slider to 100%.

  In the advanced settings, I clicked on Set A Custom Scaling Level; and I put IT to 150%.

  And now the scale seems just like setting the slider to 150%... but there is no resolution switching! No windows jumping around, and nothing strange seems to happen!

  So for now, this actually seems to work as expected! It MUST be a bug here...

• What type of LKM, IKM modules are used in the scenario of perticular?

  Hello

  I doubt, what types of modules are used in the scenario of perticular. For example, I created the FILE interface of FILE FLAT DISH.

  for this I imported LKM FILE SQL and IKM SQL to ADD the FILES of modules. Executed successfully.

  I want to know on "what kind of modules are I have to import, when I try to connect a DB to different DB, flat file DB, flat file to DB etc.

  Please send me any document.

  Thank you and best regards,

  A.kavyakumari.

  Have a look on the following document, a bit old but still is a good overview of most of the widely used available KMs

  http://www.Oracle.com/technetwork/TestContent/oracledi-km-reference-130306.PDF

• Previous data of module are replaced with the charge of the latter

  Hi friends,
  
  Once the Planner data are loaded into the data warehouse and after that I see the data of the SCM module I have loaded before using the DAC in the BI dashboard in which he is visible in the BI dashboard before loading the module projects.
  
  And also after the data of the SCM module is loaded, I don't see Finance and HRMS data that are loaded before using the DAC in the BI dashboard.
  
  Im not sure this problem why load the recent module is superimposed on the previous module to download the data into the data warehouse.
  
  What is perhaps the reason for this problem. Dint always not the cause of this problem.
  
  Thank you
  
  Kind regards
  Saro

  Try to create a new EP with required modules do not check at full load.
  Once you build the new EP CAD tools use to reset the data warehouse and run the EP, the first charge would be assimilated at full load and followed loads are levels
  If you want to go full charge just reset the data warehouse and run EP

  Just in case if you want to add another existing module EP just add these respective fields and build the EP and start to run the EP. In this case, all the other modules are run as Incr Mode and the new module like the full Mode.

  It should work.

• AF:table columns are required for the entire table space.

  Hello
  
  I use a certain controls fast query table. Some tables have only one or two columns displaying data.
  It is necessary that in such a case, avoid any white space after the columns.
  
  I tried setting for each column width to 50%, but it gave no results required in firefox 4.0
  
  I use JDeveloper 11.1.1.4.0.
  
  The only option that seems to work is to specify the width of the column in pixels. It's the last thing I like to do.
  
  Is there a styleClass or any other better alternative?
  
  Concerning

  for the game of table the styleClass as "AFStretchWidth" - which would ensure that it occupies the entire width.
  and use columnStretching as required.

  Sample:

  
  fetchSize = "#{bindings." Departments.rangeSize}.
  emptyText = "#{bindings." Departments.Viewable? "{'No data to display.': 'Access Denied.'}".
  var = "row" value = "#{bindings." Departments.collectionModel}' rowBandingInterval = '0 '.
  selectionListener = "#{bindings." Departments.collectionModel.makeCurrent}" columnStretching ="last"
  'unique' = rowSelection styleClass = "AFStretchWidth" >

  Thank you
  Nini

• make an an area smaller than the entire project does not work

  I recently installed 8 PE and converted from the original version of PE3 a project which is about 1 hour 40 minutes. I want to burn to a DVD and added some finishing touches.  Everything was fine, except that the entire project had a red line, so I decided to make the project (I couldn't see much if anything) which I did, and it took more than two days is more slower!  (35 video clips and 123715 images) OK, it finally finished so I saved the project.  Look at one was much better, if it's not perfect, but watchable.  So, back to the disk space, I deleted rendering files. Imagine my surprise when as soon as I did the red line is back, and intolerable listening to the edit mode.  The impression I got from PE8 help is that you could remove render after render files, as their goal had been finshed. I can't wait 2 days, so to accelerated rendering, I thought I would in small pieces, say 5 minutes each.  But even if I change the area of the workspace such as defined by the gray bar, (grabbing the end and drag it to a much smaller size - to the beginning of the project for example |) it begins to make the entire project again! what I am doing wrong?

  What you're looking for is the Windows address book (WAB, work area Bar). You can then assign the share of exports/only the area work for most export formats. Don't forget to do. It is usually with a drop-down menu, or a checkbox.

  

  Good luck

  Hunt

• Data NMEA which are received on the serial port, when the system starts causes windows 7 to interpret these data as a serial ballpoint mouse and moves the cursor jumping around.

  I know this question was asked several times before, but the solutions proposed, such as changin the registry does not help. It changes by itself. In the configuration that I have in my boat, the stream of NMEA data is directly injected into the COM port so no driver is necessary. It's a problem easily solved in windows XP, why is it so difficult in W7? There must be a way to permanently disable the plug-and-play driver load. I found this program that works only for Vista, if I understand correctly: http://www.stentec.com/en/download-freeware COM port plug & play blocker. If something similar could be provided by MS for W7, it would be very good...

  It turns out that the program at the port of Stentec COM (freeware) http://www.stentec.com/en/download-freeware care & play blocker, also works in W7. I don't know how it works, but it does, and it's good for me! It also works for the virtual serial ports.

• The columns appear in the data store that are not in the table

  Hi guru,.
  
  I have a table that I built in Oracle and added to ODI by refactoring it, but when I add it as a source to my interface, it contains columns that are not physically in the Oracle table that I can look into a TOAD. I dropped the prior of the table deleted-> interface-> reverse engineering table but I get an additional column. Y at - it an explanation for that? I have the table listed in a stored procedure - should I delete this step as well before reverse engineering, or is something else.
  
  Thanks in advance.
  
  Mike

  Yes. There is a possible explanation. How do you are engineering it? If you use Oracle RKM, you may be using a customized version of this KM which adds a column of your table name...

• Typekit changes type weight even though they are listed as the same weight

  Hello!

  I use police Lato of Typekit in Muse (2014.3.0.11760)

  "Lato Black" on the home page is visually different to the same exact font on another page.

  

  Home page - using Lato Black for "exhibition poster.

  

  Another page "Lato Black" for "exhibition poster" too.

  I tried to copy and paste the exact same status button to different pages, but the weight gets heavier every time.

  Hi Gary,.

  Could you also upload the page where "poster of the exhibition" looks different. I saw one instance of this text (on the homepage). Perhaps I missed other instances?

  Thank you

  Abhishek

• Painting resizing cut the lower part of the image

  If editing an image in paint. If I change the size of the "work area" or whatever called it cuts the bottom of the image, if I use the side size change channels the same thing happens. If I select the corner lower and resizen and look at the number of pixels in the background it is always the same length as the original, but as soon as I let go it instantly moves to the top and cut the part of the image. This gave me a * headaches and I want to know why MS cannot get something simple as changing the paint 'area' whatever the * he is called to work?

  Paint is a very basic graphics editor; as a suggestion, you can try IrfanView. It is a graphics editor much better with more features and capabilities, plus it's free; and has its own forum for users of help (if needed).

  IrfanView
   http://www.IrfanView.com/

  Kind regards

• How do I 'Layers' or 'Objects' are spread over the entire page length ways?

  For example, my site is 960 pixels wide. The header section is 250 pixels in height. Instead of the section header being the same 960 pixels wide, how can I stretch all the way across the page in the browser fill area. Can I physically just trim and stretch or is there a menu / setting?

  If you use rectangle as a layer or accordion menu so that you can use 100% width for these elements of the page.

  In control of the strip options, when you select the rectangle you can display the width 100% button that could make the width of the browser.

  http://TV.Adobe.com/watch/Muse-feature-tour/Muse-design-for-flexible-browser-width/

  Thank you

  Sanjit

• IPod Touch App data files are saved by the XP system restore?

  I lost the data files for the applications on my iPod Touch after a BSOD on XP so that the update to iTunes.

  "Restore from backup" in iTunes restores only the empty files, due to him having a synchronization since the failure (iTunes replaces its unique to each sync backup file), so I'm now scrambling for an alternative.

  What seems to offer the best chance is to do a system restore XP from a restore before the BSOD Point - but I don't know if the Restore Point contains a version of the iPod data files, which are stored in the hidden folder C:\\Documents and Settings\ (username) \Application Data\Apple Computer\MobileSync\Backup.

  I found a note saying: the XP System Restore saves nothing of My Documents, but wonder if it means really nothing is recorded in Documents and Settings...

  Can someone enlighten me as to the probability of the iPod Touch App data being in a Restore Point, please?

  Hi BrianCrabtree,

  I suggest you to send your request to apple support because the problem is with IPod touch applications.

  Link: http://discussions.apple.com/category.jspa?categoryID=201

  You can also check out: iPhone and iPod touch: about backups: http://support.apple.com/kb/ht1766

• Computer are not not in the HP parts store

  Hello, I have a HP Pavilion P7-1254 (details = http://h10025.www1.hp.com/ewfrf/wc/product?product=5192660&lc=en&cc=us&dlc=en&tmp_track_link=ot_we/p...).  The motherboard in this computer contains 4 outputs data SATA, 3 are used by the DVD player, HDD main and a secondary hard drive that I installed.  I am currently trying to install an internal Blue ray disc (details = http://www.newegg.com/Product/Product.aspx?Item=N82E16827140051), but it seems that the 4th SATA socket is defective (the blue ray player works fine when connected to the place the second hard drive).

  Basically, I want to replace the motherboard and I am trying to find the part number for this on the HP parts store, but the office is not listed in the http://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=0ECF85DB97EF4668BE05EE5E329C1328.  I tried desktop brand and model, series, product number and heiarchhy to find my system, but no luck.  Is there another way for me to determine the number of the motherboard, so I can buy it at another site.

  Thank you

  GRB87

  I found two parts that correspond to your motherboard:
  657134 001
  and
  657134 003

  Here is a link to HP authorized partners parties:http://h20141.www2.hp.com/Hpparts/Part_Resellers.aspx?mscssid=798D8BADFBC9484490A1C4B0E48245CA&geo_code=NA

• The list of all names of virtual machines that are attached to the computer with script group

  I need a script that would list all the virtual machines names that are attached to the Machine group as the bellows screenshot:

  

  
  

  Ce can be in any language I just need to get this information.

  I tried to Watch in database and found vm names of in table [ecm_dat_machines] and Group of/ids in names of table [ecm_sysdat_machine_groups] but I don't find table that would be assign vm to the Group.

  I serait appreciate any help or clue as I already spent a lot of time on this task.

  Attached file of import/export includes a view created for the SQL below, as well as a SQL report that uses this perspective to the computers by group in the VCM UI.

  Note that the functions used in the join of the query criteria are there to ensure that only valid/active/license machines are displayed, these date data and time are adjusted to the time zone of the user, and that the users do not see that their role does not have access to groups of computers.

  SELECT

  m.machine_name,

  mg.machine_group_name,

  mg.machine_group_desc,

  DATEADD (mi, utc.utc_offset, m.date_last_contact) as date_last_contact

  OF dbo.ecm_dat_machine_group_machines_xref mgx

  JOIN dbo.ecm_dat_machines m

  ON mgx.machine_id = m.machine_id

  Join dbo.ecm_dat_machine_groups mg

  ON mgx.machine_group_id = mg.machine_group_id

  JOIN dbo.ecm_dat_roles_machine_group_xref rmx

  ON mgx.machine_group_id = rmx.machine_group_id

  AND rmx.role_id = dbo.role_current)

  JOIN dbo.ecm_fn_machines_valid_t (vm)

  ON mgx.machine_id = vm.machine_id

  JOIN dbo.ecm_user_utc_offset (utc)

  1 = 1

• Check the log to delete oracle data file to be deleted from the root user.

  Any body can help me find the log to make sure all traces of the data files that are deleted from the root to the hp - ux Server user (and the sys log has already been modified by the root user).
  So is there a way to check the database or deleted from server level to check track of log files data files.

  Salvation;

  If, you don't have no OS level verification that it is difficult to find to answer your quesiton. For example, our system of verification on OS (also root password no case) and Db level.

  PS: @Sybrand thanks, I missed that part.

  Respect of
  HELIOS