typing and iPad at the time
Is there a cable that connects a keyboard and a charger for the iPad 2G mini iPad?
You do not connect a physical keyboard, iPads are used at best with bluetooth keyboards, which are wireless... so you can easily type and recharge at the same time
Tags: iPad
Similar Questions
-
Whenever I have turn off my pc and reboot later, the time and date go to 0.00
Original title : improve system performance slow slow start
Whenever I have turn off my pc and reboot later, the time and date go to 0.00
Probably means the ROM BIOS chip gone bad and must be replaced. Its a small coin like chip located on your motherboard. You should be able to buy one on where one sells computers and electronic products.
-
opening program minimizes and optimizes all the time
progam start showing some problem of its own.
progam was started for the first time after starting the computer indicates a sound problem, windows Explorer minimizes and optimizes all the time until he is arrested. Pls suggest a solution for this type of problem.
1 did you do changes on the computer before the show?
2. you receive an error message?
3. what version of operating system you are using on the computer?
Method 1:
You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING:
If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted
Method 2:
You can also perform a clean boot and check:
Windows XP: How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Windows 7 and vista:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.Method 3:
You can also try to run a SFC scan, it will scan and try to correct some of the system files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833 -
Slow and freezing all the time
My computer runs windows xp and its also kind of the ancients in regard to computers today, and I recently installed all updates and microsoft security system. Now my computer is running very slowly and crashes all the time! Help please! Its driving me CRAZY!
Hi DawnMichelle,
You can update the computer with the latest device drivers by visiting the manufacturer's Web site. In addition, make sure you have the latest Windows updates installed.
See also:
Increase the speed of the PC: optimize your computer, help your PC run faster
Hope this information is useful.
-
Original title: need help with wordpad problem
When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there. I double space between lines and all that is more than one page disappears. I tried all the different formats (no envelope, window envelope, etc.). How can I fix?
Hello
· What happens if you use another application to preview before printing?
· You are able to print the document correctly, or you receive no error message when printing?
You try to use Microsoft Word or Notepad to check if you face the same problem.
First of all, I would like to check to see if print preview is working on a new empty document with only a word in it.
If Yes, then the problem is the document.
You may need to clear any formatting, that depends on where you copied from.
Your rule of printer drivers print preview
-
Windows Explorer does not work properly and hold all the time
I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.
Thank you for your time and enjoy your time.
.
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
Original title: calendar
How can I get the details on my agenda which is on my iPhone and iPad in the calendar on the windows start page?
It depends on where your calendar is really stored. He usually stored in your e-mail account and connected to it. That's how Google Calendar, Gmail or Microsoft Calendar + Outlook.com (formerly Hotmail) function as business/school Exchange email accounts work.
So long story short, as long as your phone and your calendar app are both set to synchronize with the same server (so the same email account), then they will show the same calendar as events.
If your calendar is not stored in a service that can interface with your phone and the calendar app, you will need to choose a new calendar service. For example if you use only iCloud, you should know that Apple does not your calendar to display the application calendar. Google blocks of even Windows users have the full calendar function.
So if you need it, my choice is Outlook.com (or an Exchange of Business/School/University account). If you go with Outlook.com, you can use it to store your calendar and keep your iPhone calendar in perfect sync and there is no need to change your email address or anything deep like that. In fact, you can connect to Outlook using the same account that you used to ask this question.
-
March 31, 2016
Hello.
Yesterday morning, I installed Adobe Acrobat Pro XI, and because of the time needed to install, I left my office for the day and my computer left overnight. When I arrived at my office this morning, I checked my email and found Court electronic filing of notifications of PDF documents filed in two federal cases, I'm working on that. I went to open the documents in both cases, but the documents would not open, and I have lost these documents. I could look at my computer screen and saw a message from reference in order for me to open documents, I had to accept the license agreement provided by Adobe.
I'm not an individual computer, and I seriously need your help. Could you please guide me for the license agreement I need to sign in order to retrieve and open PDFs that are filed in the federal courts, I practice before? I have some papers I have to drop off this morning in Federal Court, which must be filed in PDF, so time is critically important.
Thank you for your help, cooperation and professionalism. I sincerely appreciate your assistance.
Best regards
Dean Browning Webb, Esq.
TV: [503] 629-2176
Cel #: [253] 686-5111
First of all, I'm sorry you had trouble. But you posted in the wrong place. This is the Adobe Connect forum, for users of Acrobat Connect Pro.
How have you lost documents? If documents have been emailed to you, you should always be able to recover again from your email. Try to launch Adobe Acrobat FIRST, then using file > open to retrieve the documents where you stored the on your computer.
Hereis a list of product licenses, but I do not think that this will help you. Try what I suggested and let me know what happened please. Good luck!
-
I can't install the LR. I made the account, and paid at the time of install the creative cloud wrote the application has stopped working. What to do
Install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe
Use it to install your lr.
-
Satellite U500-10F - Dungeon fan turning ON and OFF all the time
Hello world
Just bought my u500-10F and installed Windows 7 Enterprise on this.
Having a very weird problem, the fan keep turn on/off all the time every 10 seconds or more, even without any CPU load. Any ideas? Is there a fan control software?
Rgds,
ArleyAs you know that Win7 is not released and without support, there is therefore no Toshiba Software for any type of power control and the fan at the moment.
Have you noticed the same behavior of fan preinstalled Vista operating system?
-
Program LabVIEW will hang between 33% and 50% of the time.
I have a problem with a Labview program, I did. I have two programs that do the same thing. One is as a flat sequence, and the other is in the form of State machine.
As explained in the link below, I would like to use a microcontroller to perform wiring for automation of a measurement process. A separate current source and volt meter will be used.
https://forums.NI.com/T5/LabVIEW/sequence-a-good-idea/TD-p/2601333
I did some simple test programs that I join since then. The problem is when running, that the labview program crashes, but not all the time is to run the program.
For example: Hall 1.2.vi will correctly work twice with the third time, he is executed, it crashes. If Cancel you and try again, it will run again twice without any problem with the third hanging. It is in the flat sequence format (was in a flat sequence, but merged windows because I thought that was the cause). From what I can tell, the program crashes when calling Keithley 6517 unique Read.vi. Two connected Keithley devices are connected to the computer via GPIB to 16 and 27. The way I checked if it was this vi the cause or contributed to what I deleted the program never hung and it. I find it very strange that it crashes exactly on the third attempt every time.
Simple.VI Hall 1.3 will work the first time and hang the second time. If it works 50% of the time. It is in the format of State Machine. It hangs in the case entitled "Measurement 1" that contains the Keithley 6517 unique Read.vi.
I used the running highlight button and watched the program to run. Curiously, it only crashes when you use this button. So I tried to add some delays/waiting in different places without success.
This could be the cause? As a side note, I say that the program is suspended for two reasons. The principal is the program does not run so the execution arrow is always black. The second thing is that if you notice at the end of the labview program, I have a block he who turns to the power source which does not happen when it crashes. I have to turn it off manually, and then click the abort program button to stop labview.
-
Why does Adobe Bridge work so slowly? And why it crash all the time? I have Windows 8.1 and use Photoshop 2015.
Provide relevant information to get faster answers
More information you provide about your situation, the better equipped with other community members will answer. Consider including the following in your question:
- Product number and the version of Adobe
- Operating system and version number
- The full text of all error messages
- What you were doing when the problem occurred
- Screenshots of the problem
- Computer hardware, such as CPU; GPU; amount of RAM; etc.
-
Presentation of the iPhone and iPad in the same application - same product ID versions?
I submit a DPS app with iPhone and iPad "renditions" today. Can I use the same product or more different ID for the sheets that I submit with each app?
The two renditions are of the exact same content, they are free, so does not need approval of IPA, so I guess they must have the same ID?
It doesn't really matter since the folios are free, but using the same product ID for one set a "renditions" folio is the recommended method.
-
the value of pan and zoom of the time constraints?
PE10 using - I have a photo image that is attached to a total (hold time) that I want, I want add pan and zoom effects to it with back change the span of the image on the timeline. Is there a way to tell the first elements to force the pan aggregtate and unavailability zoom times not to go beyond the original image?
To clarify, I had an image that held for the correct duration, but when I was sleeping w/pan and zoom, I found that I had extended the duration of the image, while it was now about 5 times longer that it should have been, and he threw all my other pictures to the bottom of the timeline. I like to keep the fixed duration without having to pull out my calculator and stopwatch.
Thank you (just learning this...)
calpolyjeff wrote:
When I was sleeping w/pan and zoom, I found that I had extended the duration of the image, while it was now about 5 times longer that it should have been
You must watch the landmarks of Pan & Zoom tool in the image and changes with the timeline when working in the tool. As you add / move / delete your frames you will change the elements of duration - the time to hold and the Pan.
In the example below, my time to Pan between part one and part two is sixteen seconds. You can change this by clicking on the time of pan and enter a duration. The other times I've highlighted is is the second a downtime for two framework. Again you can change it by clicking on it. You can also see the time to stand for a framework to the second five point on the timeline itself.
Hope this helps,
See you soon,.
--
Neale
Insanity is hereditary, get you your children
-
Today when I log in to Facebook through Firefox, it opens only 2 or 3 posts by the news feed (it happens very often, but not always). As I can remember, I've ever known such a problem in the past, with the exception of the rare and occasional accidents which were solved instantly. I am facing this problem for 5-6 months.
Whenever I face such a problem with Firefox, I log in to Facebook through Google Chrome to check if my internet connection works correctly and have found no such problem with Google Chrome. I also checked to see if this problem is caused by an update hidden applications or anti-virus automatic scan, but found nothing. I also tried "Refresh Firefox - discount to zero and settings modules" and uninstall and reinstall but the problem was not solved. All solutions, please?
Please make sure that there is not a problem with any acceleration addons or material by trying Safe Mode:
Maybe you are looking for
-
My 32 bit Vista Acer Aspire 4730Z recently suffered from the problem of "compatibilitycheck.exe". See (http://forum.kaspersky.com/lofiversion/index.php/t313939.html) for more information on this problem. I repeatedly go to Safe Mode and use the featu
-
Is what level of protection against shock disc in Portege R830
People, I work in an area where there are a lot of people who wear their laptop Portege (especially the R830) autour while they are still on - mainly well they are switching from a desktop to the meeting etc. rooms and often their transport on an ang
-
How to get the older version of SAV
Hello I have the 2016_02 version GOING. But it's not compatible with my version (2011) of Labview. So I installed the 2014_02 going TO. But when I run the Setup file, the window that is attached, appears and nothing is installed. So, how can I instal
-
VAIO Duo Windows 13 8.1 questions
Hello. I have updated for Windows 8.1 and I'm having a few problems: 1 Vaio Update find are more updated despite several updates on the support Web site. I had to manually install. I'm under 6.3.1.10120. I even tried to reinstall the software. 2 Vaio
-
Impossible to install facebook plugin for 32-bit vista
Windows indicates that it can not install facebook plugin for uploading photos. will not recognize the file, says unknown file. file is install_facebook_plug file cure - in_1.0.3 [1] tried that it is of no help either.