U2412M brightness always jumps to 100% after Pc reboot

Similar Questions

• Re: Satellite L40-18 X PSL48E: brightness goes back to max after each reboot

  Hello

  I have Satellite L40-18 X, short model: PSL48E
  bought with Vista, bios is version 1.70.

  It is very annoying problem with the screen brightness control:
  Whenever I restart the Vista operating system, the brightness is set up and I have to back to low light.

  By the operating system into hibernation, there is no problem - brightness is fine as I leaved the same percentage.
  The Fn + F6 and F7 keys to work properly, OS and BIOS - everywhere, but after I start the operating system, the brightness is at the highest level

  Absolutely the SAME problem is in windows XP (with the same bios 1.70) - Fn keys work fine, but when the os starts - brightness is always at Max level, hibernating is OK.

  Can you give me suggestion?
  Now, I don't want to make reflash the bios, because the site old version 1.60 for Vista, and I can't have the version of the mine.

  Appreciate any help :)

  Believe me, buddy!
  This is not a bug of any other software problem.
  Fact is that you can use different profiles in your Vista power options.

  I assume you are using the standard profile that contains the parameters for the use of the laptop connected to the main power supply. To my knowledge, the display is set to max brightness for best performance

  If you want to use different brightness you will need to create a new profile in the power options, and then you should change the settings
  Then save it and set as standard, default, or what I want to say that this profile should always start

  Hope this helps

• battery percentage jumps to 100 percent during charging and falls to 'real' percentage when disconnected

  Hello

  I charge my new iphone 6s and I noticed that evertime I plugged my iphone on my macbook pro, as the battery percentage jumps to 100 percent. Then, when I unplug it, it jumps down to the 'real' percentage. IM currently draining the battery to make a new calibration to see if that fixes the problem. Any ideas on why this might be happening would be greatly appreciated.

  Thank you.

  Drain the battery could do more harm to the battery. Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  Implementation in the new device would be the next step after that, where force restart does not work.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If still no luck, get verified by visiting a service provider authorized Apple or Apple Store next to your place. Or contact the Apple Support for repair.

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Why is-expose-animation-duration always set to 0 after I restarted my iMac?

  Why is-expose-animation-duration always set to 0 after I restarted my iMac?

  I always have to open the Terminal and run this command, back to normal.

  defaults delete com.apple.dock expose-animation-duration; Killall Dock

  Could possibly have installed something that is setting this value to login? It is not a 'necessary' preference, so I guess something is added.

• screen jumps between 100% and 400%, how can I stop?

  My computor screen jumps between 100% and 400%, how can I stop?

  In internet explorer.  I checked to see if the magnifying glass was on it is not checked.   I just bought new a moniter.   Changed the back of the mouse to connect to see if wireless was the problem.  He jumps to nearly 400% at the top of the screen on the top 4 ".  I am running Vista Home Premium.  Thanks for your help and Merry Christmas!

• CPU on nearly 100% after the last update of Adobe CC

  CPU on my MBP runs to nearly 100% after the upgrade to the latest version of Adobe CC. autonomy down and MBP heats massively... CCXProcess killed in the Task Manager, but recharge automatically. Very annoying...

  I would advice you Contact Customer Care as a troubleshooting technique may be necessary.

• Why dose my jump strokeweight 100 00 pt, when I choose for example 1 pt?

  Hello

  First of all, I must say, that enter in contact with Adobe System Support, is far from being what I call service :-(

  I have this problem in Illustrator CS6. When I try to select the weight of the race, for example 1 PT.., the weight indicator jumps up to 100 000 pt... and the shot too!

  I really need help soon, because this was an issue for a period of several months now, and I am not able to work.

  That's what I tried already, which does not work:

  • Reinstall Illustrator hard wear.
  • Trashed the Illustrator Settings map.

  Thank you for your quick response!

  Best regards

  Kathinka Dysthe

  FRA: OldBob1957

  Sendt: 2 desember 2014 16:05

  Til: dysthe kathinka

  Emne: Dose why my jump strokeweight 100 00 pt, when I choose for example 1 pt?

  Why dose my jump strokeweight 100 00 pt, when I choose for example 1 pt?

  created by OldBob1957 https://forums.adobe.com/people/OldBob1957> in Illustrator - discovers the discussion complete https://forums.adobe.com/message/6978590#6978590>

• After the third full install of Photoshop here always the same answer after opening provisional "could not initialize Photoshop because of a program error."

  After the third full installation of Photoshop that's always the same answer after provisional opening "Failed to initialize Photoshop because of a program error" someone can tell me what to do flat close all, des-Installer, clean, has chosen already made for the installation of designer Cloud, which begins to... (perhaps regret installing it, 30 days may not hold out of)

  Hi DanielDL,

  Please open the finder, click go and select go to folder and type / library and press ENTER.

  Go to the Application Support/Adobe/color and settings folder and rename it to settings.old

  Then try to run Photoshop and check if the problem persists.

  Thank you

• These are help forums always available for us after our 1st year, post-buy of Dreamweaver CS-5 expires?

  Maybe someone here knows if these help forums are always at our disposal after our first year, after the purchase of Dreamweaver CS-5, has expired?

  The forums are free to anyone. You don't need to own an Adobe product to participate.

• I tried to upgrade to Firefox Ver 28, but after each reboot it always shows the version 27.0.1

  I had been using Firefox Ver 26 and each time it restarts, there is a prompt to upgrade to version 28. I tried to install the upgrade and even after a reboot, continued the old version. Twelve, I uninstalled Firefox and installed new worm 27.0.1 when I check for the upgrade, it downloads a 15 MB file, but continues with worm 27.0.7 even after reboot. Am I missing something?

  1. Download the installer for the language you are interested in.
     • http://www.Mozilla.org/Firefox/all/
  2. Release of Firefox.
  3. Uninstall Firefox from the control panel. DO NOT tick the option on the deletion of your personal data and customizations.
  4. Run the installer downloaded previously.

• Downloaded Windows 10. Yet, after each reboot, windows 7 restart... no windows 10?

  Original title: Windows 10

  I have a laptop with windows 7 installed. I ran a few the applet to see if the laptop is eligible. He did, and I see the windows icon 10 appearing in the task bar. I click on it to get the upgrade and windows starts the download process. Then after it is downloaded double click on the file and it seems to be the installation. This seems to go to the end and I restarted several times when asked to do so.

  Yet, after each reboot, windows 7 restart... no windows 10.

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• HP Pavilion M7 - WiFi lights not after a reboot. -Windows 8

  Hi everyone, I just reinstalled Windows 8 and I am very frustrated with this little problem.

  I downloaded the Realtek Wireless LAN driver from the HP website. I installed it. After installation, the WiFi works automatically. Now, after a reboot, the WiFi does not start upward. Everything is up-to-date, I checked in the Device Manager, and I even reinstalled the drivers. It does not just straight up. Everything on Windows said I need to physically turn it on.

  Any help? I can't believe that I can't use the built-in WiFi. I currently use a LBS-Link USB WiFi adapter which worked well in all of his application since he came home.

  Squerl,

  Welcome to the forum.

  First of all, you can try a Power Reset, which does NOT affect data on the disk.  The power / Hard Reset can help if the problem is in the pilot instructions that are stored in the computer's memory and persist to boot at startup.

  Resetting the forced feeding

  Performing a Hard Reset or forced Reset

  Power reset cannot tell the difference between drivers - it does not analyze a driver before applying.  It assumes that all the drivers on your computer belong there.

  EXAMPLE:

  • If the driver on the disk is the wrong driver before rebooting, it's always the wrong driver after the reset.
  • If the INSTRUCTIONS of the driver are tangled, messed up, or there are missing pieces of these instructions, the reset can solve the problem.

  Why a power reset works to solve some problems:

  The power reset does not install anything on your computer, it does not remove the programs on your computer and Reset does not change the settings on your computer.  Your data and programs remain as they were before the reset has been applied.  Reset runs old program of the memory instructions and forces the computer go to disk operating system for new instructions.

  Why a power reset does not work:

  If the problem is more than a simple tangle, if 'good job' on the computer is not good enough - in other words, you need an update, a new driver, or there is a problem that can not be "unraveled", then reset won't work.

  If there is a hardware problem power reset will not work.

  ==============================================================================

  Then, you can set the properties of the LAN driver to allow the driver to "wake up" the computer.   At the same time, you set the driver to NOT allow the computer to stop the driver.

  Windows key + X > M (opens Device Manager) > network adapters >

  Right click of your wireless adapter > Properties > Power Management >

  Select as appropriate:

  Clear the check BOX "Allow the computer to turn off this device...". »
  CHECK 'Allow this device out computer' > *

  Ok

  * NOTE
  

  Read the warning on the wireless driver performance while the notebook is on battery.

  Remember that this setting CAN have side effects.
  

  =====================================================================================

• EA6500 do not save IP/changes of classes there after the reboot

  Hello

  I'm trying to put up EA6500 with the latest firmware installed (1.1.28.147876). Under Local network - connectivity, I fixed router details (address IP/mask) and DHCP pool several times, you click on apply, received a message telling me how the router applies settings and this may take a few minutes. This is not fortunately, but after internal application of the network of these parameters has yet 192.168.1.0/24... It ends with a new random C class of the range 10.0.0.0/8. What the...?

  I suspect changes router internal IP range after each reboot of the device. This behavior may not be normal... but more I read about the EA6500... is not the router. -Suggestions, I actually do something wrong here?

  Oh - the EA6500 is configured to get internet via DHCP, it should get an IP address of 192.168.1.0/24 - modem works as a router also and there is no need of EA6500 make another PPPoE connection. As access to the network is concerned, it does not work. But I really don't like this changes to the internal network IP range...

  Because it appears that you are trying to cascade LAN-to-Wan, the router is detecting a conflict of IP address and changing automatically within the 10.x.x.x range. It's normal. The EA6500 trying to tell you that you have not configured it correctly. So he had to resort to setting up itself.

  If you want to change to the 192.168.x.x, then follow the instructions for editing cascading of a router linksys to another router below. Most of the people just change the local of the EA6500 to 192.168.2.1 IP address if they try LAN to Wan to a DSL modem/router in cascade. Change the DHCP of the EA6500 to 192.168.2.100 Beach - 149

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=3733

  If you want to use your EA6500 as your main router, then you have to put your DSL modem/router in bridge mode and then change the type of Internet connection on the ea6500 in PPPoE.

• Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

  This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

  -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

  -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

  Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

  Driver provider: Microsoft
  Driver date: 14/05/2009
  Driver version: 7.2.1127.2008
  Digital signer: Microsoft Windows

  Thus, we have solved the problem! There are two possibilities of your problems:
  1 company Adobe uses the Bonjour service , this service should be disabled.
  Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

  2. If it is not signed as Bonjour service. Try to disable the service:
  Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

  It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

• DESKTOP HP 700-527C SERIES WILL NOT START AFTER A REBOOT WITH MY SEAGATE BACKUP MORE 4TO CONNECTED TO USB 3.0 OR 2.0

  WHEN I CONNECT MY EXTERNAL HARD DRIVE BACKUP 4 TB OF SEAGATE MORE SACT4000600, HE NOT ONLY RE-START THE COMPUTER. IT SEEMS TO BE

  TRY TO RESTART ON THE SEAGATE, NOT THE INTERNAL HARD DRIVE. MY COMPUTER IS A HP-700-527 C, RUNS THE WINDOWS 7, THE INTERNET EXPLORER BROWSER. MY ERROR MESSAGE SAYS "NO BOOT DISK OR DISK IS DAMAGED." I JUST INSTALLED CMS BOUNCEBACK ULTIMATE, WEBROOT AND MICROSOFT OFFICE PRO AND VISIO.

  I FIRST SET UP THE FIRST COMPUTER AND RECEIVED THIS MSG ON RESTART AFTER THE DISKS HAVE BEEN INSTALLED FOR BOUNCEBACK AND SEAGATE. THOUGHT IT WAS A PROBLEM OF HP, NO LUCK WITH THEIR HELP. MICROSOFT IS NO HELP. A COMPUTER HELD THE GEEKSQUAD AFTER THEY WENT THROUGH IT REMOTELY AT HOME, THEY COULD NOT MAKE CHANGES TO THE BIOS REMOTELY. BIOS IS BELIEVED TO BE IN THE WRONG ORDER TO RE-BOOT. THEY COULDN'T GET IT TO STOP TRYING TO RESTART ON THE SEAGATE, EVEN WHEN THE BIOS FOR THE REST HAS BEEN DISABLED.

  ONLY THING ON IN THE BIOS WAS THE C: / DRIVE. BUT, WITH IT UNPLUGGED IT WOULD RESTART WITH THE BIOS ALWAYS POWER OFF TO EVERYTHING ELSE? WE PLUGGED ON THE 3.0 AND VERSION 2.0. SO, I TOOK THE COMPUTER BACK THINKING IT WAS HER, EVEN A NOVELTY. AT EXTERNAL BACK SAME THING. SAME THING ON THE NEW COMPUTER AND THE NEW HARD DRIVE! .... SEEMS TO ME A HARDWARE PROBLEM? BETWEEN SEAGATE USB 2.0 AND USB 3.0 PORTS?

  IF THE BIOS EVERYTHING IS OFF, THEN WHY HE WOULD ATTEMPT TO BOOT UP OUT OF SOMETHING THAT DOES NOT EXIST IN THE BIOS IT IS! ... MEETS EVERYONE. I HAVE A SMALL PORTABLE 1 TB SEAGATE, IT WORKS PERFECTLY IN USB 2.0 NOT IN 3.0, COOL, MY DIGITAL WEST ON USB 2.0 BUT NOT USB 3.0 ŒUVRES. MY COMPUTER WON'T BOOT UP OFF OF THEM. SITTING AT THE DRAWING BOARD! ??? !!! ....

  Hello
  Thanks for posting your query on the Microsoft Community.

  As you mentioned that your HP desktop computer is not able to start after a reboot.

  I would first disconnect the backup / external drive and check if you are able to start or not.

  I suggest to go to the BIOS and boot sequence and select the internal hard drive as first boot device.

  NOTE: BIOS change / complementary Metal Oxide Semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Setting changes are made at your own risk.

  If the problem persists. I suggest that get you in touch with HP support in order to solve this problem.

  See the link below.
  http://support.HP.com/us-en

  Please let us know if you face the future with other problems with windows. We will be happy to help you further.