U2414H, Dual, laptop, Windows 10, Nvidia GTX 960 M, no STDS to the second monitor?
Hi all
I hope that I have included all relevant information in the present, but ask if I missed something. I bought two of the screens U2414H and a Windows 10 laptop computer powered by GTX 960 M with HDMI and Mini DP ports. My goal was to be able to the Garland of the whole U2414H screens so I could use my laptop out and about, and when connection back to the monitors of would have to plug in a cable and get two screens. In theory, but...
I followed the instructions and using two Mini-DP to DP cables, connected the mini laptop RFP RFP on the first screen. DP on this same screen highlights Mini DP on the second monitor. I activated the DisplayPort 1.2 on both of these screens. I can't get any signal on the second monitor, it boils down to the power saving mode.
Otherwise, I decided I would try using two cables and ditch the idea of DP STD I can at least use the two screens. So I have laptop HDMI to a screen and the MiniDP to another, and therefore, that alone will never work at a time. Individually, they work very well, both with HDMI or DP. But the two connection fails every time. When I tried to connect a display of alternative supporting HDMI as the second, which works very well.
So I had an autour reading and it seems that it is common to have problems of connectivity to these screens. This brings me well on my two questions:
(1) is there something that would work?
(2) assuming that there is nothing that works, Dell can swap these screens for two that will achieve what I need?
Thank you
Dave
In MST, DP 1.2 should be turned off (disabled) on the second monitor.
Laptop AMD on--> U2414H CDM to cable DP--> DP U2414H #1 in (DP 1.2 enabled) (Port #3 in the image)
#1 U2414H (Port #5 in photo) DP--> DP U2414H CDM cable--> 2 # U2414H CDM in (DP 1.2 disabled) (Port #4 in photo)
When you use only no STDS, is the lid of the laptop open all trying to run two monitors of U2414H? This laptop can even run three screens, laptop LCD + 1 # U2414H + 2 # U2414H?
Tags: Dell Peripherals
Similar Questions
-
Impossible to update NVIDIA GTX 960 M video driver on Y50 - 70 portable running Windows 10
Hello, I am unable to upgrade the NVIDIA GTX 960 M video driver on my 70 - Y50 runs Windows 10. The version of the NVIDIA driver I have currently installed is 353.62.
When I try to install the latest driver from NVIDIA GeForce experience, it tries to install but I receive a message that the driver installation has failed and then Manager device displays the video card NVIDIA as a video controller with 3D exclamation next to it in the other devices section. The same problem happens if I use the driver software upgrade option in Device Manager.
Check this link
http://www.custompcguide.NET/2-methods-to-fix-Nvidia-installer-failed-issue-for-GeForce-video-cards/
I hope it is informative for you
-
X 51 R2 Nvidia GTX 960 video card update
Hello, I currently stock r2 of Alienware x 51 with an Intel i5 running my graphics card is a 1023 MB NVIDIA GeForce GTX 645 (NVIDIA) and a block of power SUPPLY 240 w. I wanted to upgrade my graphics card to play the most demanding games like Arma 3 resources. I know that I could get a gtx 750ti graphics card no problem, but I want more. I've been looking and the card that seems to fit in my price range is the Nvidia GTX 960. I did research it and getting mixed reviews weather or not, he'll be back in my case. I spoke to several representatives of Dell and Alienware, and some say I can get the 960, some say I need a compact 960 and some people say that I can't pass the 960 at all, even with a 330w power adapter. I know I need to improve my diet from 240W to a PSU 330W before even thinking 960 GTX. I would like an administrator or someone with information to guide me in the correct path. If I can't get the 960 regular but need to get a smaller 960 please link me to some good options that would be compatible with my device. I don't mean to make any changes to my turn. Thanks for your help, I certainly need it! I am looking for the correct graphics card for some time now.
So I guess.
-
The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor
I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.
The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.
I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.
What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.
I'm talking about a window similar to this one
http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNGTry changing the backup.ini
you find it in
.. \Program files (x86)\MozBackup\backup.ini
Open the file backup.ini with editor
Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights
Change the value of "1": monitor
wyzodir =
; Monitor: the monitor number where MozBackup window will appear
monitor =1
'2' or whatever the value of your primary monitor is:
wyzodir =
; Monitor: the monitor number where MozBackup window will appear
monitor =2
System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.
-
can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop
You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK buttonMultiple monitors: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questionsSet up multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitorsMove windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitorsUnderstanding multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors -
How can I get Windows Photo Viewer (7) to play his slide show on the second monitor?
I attach a second monitor to my laptop with an RGB cable. I would like to be able to play the slide show and screen saver of photo on my extra monitor instead of on the little tiny screen on the laptop. Is there a way of photo windows 7 Configuration Viewer to do?
Hello
Thanks for posting your query in Microsoft Community.
From the description of the problem, you are not able to play slide on the second monitor photo viewer. I'll be happy to help you on this question.
I suggest you try the steps from the following link on how to move the windows or the programs between the different monitors.
Work and play better with multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitorsMove windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitorsI hope this helps! Let us know if you need help with Windows in the future. We will be happy to help.
-
All,
At the launch of a Flash video in full screen when you are using two monitors, the video freezes at a still image on the second monitor. This happens in mirror and screen extended mode images. The video continues to play normally on the first screen, and the audio continues normally as well. This problem appears only during playback of the video using Internet Explorer, do not not Firefox.
This seems to be a software problem, not memory or devices. To be clear, the video is not stutter. rather, it freezes at a still image. I didn't have this problem using internet explore with the same configuration until I upgraded my laptop Windows 8.
Here is my configuration:
Windows 8. Internet Explore 10.
Shockwave Flash Object: 11.6.602.167
ASUS laptop computer connected to a HD LED TV via HDMI.
GeForce GT650M graphics card.
Core i7 and 8 GB of RAM.
You think, what is happening? Troubleshooting ideas? Thank you.
I just gave it a try on my setup triple monitor, but could not reproduce the problem. I tried both stretching and duplicate the work stations, but they all work as expected. If Firefox works well, then I wouldn't suspect your video driver but it is probably useful to take a look without worrying to do of course, you have the latest driver installed. Then, try to temporarily disable hardware acceleration to see if that makes a difference.
How to disable or enable hardware acceleration?
http://support.Microsoft.com/kb/2528233
Using IE in desktop mode or modern/metro?
Thank you
Chris
-
How can I get windows appears on the second monitor?
Windows does not detect the second monitor. Unable to access options to the mirror of the main screen. Second montor is connected, but is only the display wallpaper.
Hello
1. How did the second monitor connected to the computer?
I suggest you try the steps from the link below and check if it helps.
Solving the multiple monitor problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-multiple-monitor-problems
Understand multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Understanding-multiple-monitors
Set up multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Set-up-multiple-monitors
Hope this information is useful.
-
Disable the second monitor Windows 7
How can I disable second monitor in windows 7. I want the computer to a monitor, so I can use the second monitor to my new computer.
Thank you.
Hello
You can remove the physical connections of the external screen and then check.
Follow the steps and then check.Method 1
Check if the monitor is present.
a.Click start.
transfer type of search box to adjust the screen resolution
Method 2
You can read the article and see if it helps.
Move windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitorsSee also:
Work and play better with multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors -
Hey guys, this is the configuration.
View of the horizon 7.0.0
ESXi 6.0 build 3620759 (U2)
Apex 2800 and driver package 2.5.3 (supports for Windows 10 and vSphere 6)
Windows 10 x 64
VMware Tools 10.0.8
The symptom is on the initial connection, the second monitor is not same display and the primaries to the resolution no standard. Try to whittle down where it is. PCoIP server log shows that APEX is only used for one of the monitors, which is not good. Later connections show using Apex for two. Apex driver is installed in the Windows 10 comments as well as ESXi. Think it is purely a question of Teradici, but thought I'd post here in case someone else has experienced.
Initials
Subsequent
I was able to work around the problem by making a pool out of the gold statue and by connecting to it with a zero client, by disconnecting and then reconnecting in. Then I built the pool out of this statue in gold which had already been connected with a zero client. For good measure, I also reinstalled the drivers of the Apex in the gold statue.
-
I don't know if I'm in the right forum for this question, but I don't know where else to ask about installation on platforms. Thus, the computer I use at work is a PC. I know that you are allowed to install programs on two computers, a computer work and a laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?
What exactly Adobe product?
Clouds: Yes.
Creative Suite: No.
-
Impossible to change the orientation of the second monitor attached to my laptop
I have connected a second monitor to my computer hp laptop pavilion m7-1015dx nine. When I go to the orientation drop windows Mobility Center is not here. I also tried the graphic control panel intel and you can not find the rotation and orientation settings. I used to be able to do it easily work on my plu xp pro laptop. Any suggestions?
Thank you
Dan
Hello
Check with HP Support, their drivers and documentation online and ask in their forums
about known issues with this model. There may be a BIOS, chipset, and/or video
updated driver available.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=========================
These should help you put in place.
How to set up dual monitors in Windows 7
http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/Two screens are better than one
http://www.Microsoft.com/athome/organization/twomonitors.aspxWork and play better with multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitorsMove windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitorsTutorial: How to set up two monitors (Windows) - video
http://www.YouTube.com/watch?v=YFCpaAs5s3cHow to set up multiple monitors
http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
This was happening with FF 3 before moving on to 4 and not going on with FF4.0 until the 4.0.1 update has been applied, the first time, he ran. Same problem on another computer running FF3, so maybe a related problem of the extension.
If I have three windows open and close the third, I don't get it. Only when two are open and one is closed. I could have three, close one, then the second and get the prompt.
Non-disabled extensions
Adblock more
BugMeNot
Cooliris
Download Statusbar
DownloadHelper
DowntThemAll!
FireGestures
HTML5 Extension for Windows Media Player
HTTPS everywhere
Java Console
Download the PDF
Session manager
TinEye Reverse Image Search
YouTube how SnobPeople with disabilities
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
Manager display Dell cannot see the second monitor in Windows 10
I have Dell monitors: a U2515H and a U2413. In Windows 7, Manager display has a drop down at the top allowing me to select each monitor. In Windows 19 (that I just installed), he went, I can change only brightness to one of my monitors.
I downloaded the latest version from here but no difference (in fact he told me that my current version is more recent).
Y at - it a software update in the works, or any manual fix I can do?
DDM requires more than a simple detection of the monitor - it requires a reliable * two-way * communication channel on the screen, where simply display something on the screen requires only a one-way link. If you check the DDM diagnostic log when you have a failed DP1.2 Garland, I think you'll find both monitors are detected, but we have a specific Windows error message that came through the display driver. The culprit will probably be of the 1st generation U2413. This cannot be fixed by an update of the MDD.
Given that monitors DP1.2 1st generation have experienced problems with the DDC/CI, one thing to try is changing the physical configuration.
-Connect the U2515 directly on the map of AMD, and * allow * DP1.2 in the OSD U2515
-Connect the U2413 to the U2515, and * disable * DP1.2 in the OSD U2413.
-
Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.
Turn off the computer.
Wait 10 minutes.
Start the computer.
The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.
Launch the prompt with administrator privileges.
Press the Windows key + X
Click prompt (Admin)
Type the following command:
Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN
Press enter on your keyboard
Exit command prompt
Restart
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times and try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Do a clean boot, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
- If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
Maybe you are looking for
-
How to change password of 6 to 4 digits?
How to change your password of 6 digits to 4?
-
When I turn on my desktop computer, it goes directly in chkdsk mode. When it comes to 49% last step 5, it freezes. So I find myself with the blue screen with a white print and nothing it moves! Maybe someone knows how can I break the cycle to start n
-
New Facebook 'reaction Button' shows is not on Xperias?
As I logged my FB via a PC account, I noticed these icons (buttons) on facebook: I know that most of us here know what are the following. Thus, using the PC and by pointing the cursor of the mouse on the button 'like' you give other options (or react
-
SigmaTel C-Major audio driver? How to replace or renew?
I was working on my computer and this place poped: "Sigmatel C-Major audio driver has stopped working properly. To resolve this issue, go online to the site Web of the manufacturer of your computer and search for Sigmatel C-Major audio driver updates
-
his adjustment-windows audio service
How can I activate the service windows audio?