Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor
The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor
I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.
The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.
I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.
What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.
I'm talking about a window similar to this one
http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG
Try changing the backup.ini
you find it in
.. \Program files (x86)\MozBackup\backup.ini
Open the file backup.ini with editor
Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights
Change the value of "1": monitor
wyzodir =
; Monitor: the monitor number where MozBackup window will appear
monitor =1
'2' or whatever the value of your primary monitor is:
wyzodir =
; Monitor: the monitor number where MozBackup window will appear
monitor =2
System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.
Tags: Windows
Similar Questions
-
Windows does not recognize second monitor, lists as generic pnp monitor
I have a Setup dual monitor. When I bought the monitor in that I plugged it, windows 7 recognized immediately there were no problem driver. After about two weeks all sudden Windows Add as the right brand and model but just as a generic pnp monitor. I rebooted and the problem was solved. Then it started happening more and more and now I have nothing will fix the problem. I installed the drivers for the monitor, ATI drivers reinstalled and nothing else in between I can find. It wouldn't be a problem except that when it it lists as is the generic monitor does not have the correct resolution and I'm stuck with a second monitor that is horrible with a lower resolution. Any help or ideas would be useful.
Specifications of the computer:
Windows 7 Ultimate 64 bit
Motherboard Asus Maximus II
Intel Core2 Quad Q9550
4 GB of Ram
ATI Radeon HD 4870
First monitor: Acer AL2216W
Second monitor: Optiquest Q2162wb
Hi k.Winger,
What happened when you tried to remove it in Mode safe?
I suggest to disable your antivirus and security temporarily software and try remove and reinstall driver.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
My company recently purchased HP EliteBook 840 G1 laptops with discrete graphics. Alongside this, we use the Dock UltraSlim 2013 with dual monitors HP LV2311 connected using HP DisplayPort / DVI adapters.
8.1 Windows displays only a single monitor, that the second monitor is not available. I can try to cover both monitors for a resolution fo 3840 x 1080, but when I try to do just the display reverts to the poster in mirror.
I can use the DisplayPort on the side of my laptop and just a single DisplayPort on the platform and the OS will see both monitors.
Please advise, it is unnecessary to have a dock with double DisplayPorts which cannot display two monitors with them.
Yes the problem really existed with the original HP driver and that Microsoft installs by default. HP released a newer driver for 8.1.
-
Hello
I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).
I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.
I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.
I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.
Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).
I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.
Thanks in advance,
Alan
PROBLEM SOLVED!
It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.
Thanks again to all who have suggested things.
-
I have a second window open on a second screen, and I want to keep constantly active.
Currently, if I click on something else, IE Skype on my laptop, the second screen goes idle and narrows mode full screen. How can I stop this from happening?
Hello
If you make reference to the window becomes inactive then this is normal because at some point, there may be only one window that could be highlighted and which would be not active.
However, you can publish your comments for us on the link below.
-
Compaq nx6110 driver for windows 8.1 required
My grandfather died and left me his Compaq nx6110, I installed windows 8.1 but no soundis work.
the drivers of xp in the sp30130 utility does not work in win 8.1 has someone has a solution. Thnaks in advance
Hello:
It is not a sound driver W8.1 for the nx6110.
Try to manually install the Vista driver as follows...
Download and run the Vista driver. Conclusion of any windows error.
Go to Device Manager and click on the multimedia audio controller needing drivers. Then click on the driver tab.
Click on set to update driver. Select her browse my computer for driver software method and find the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp34702. Make sure that the include subfolders is selected and see if the pilot goes like this.
If this is not the case, go back to her browse my computer for driver software window and this time at the bottom, select Let me pick from a list of drivers for devices on my computer. Select disk and go to C:\SWSetup\sp34702\i386\Vista\smwdmch6 and select the SoundMAX Integrated Digital Audio in the list and see if the pilot goes like this.
-
Pavilion DV7: How to make windows 10 talk to external monitor?
I changed my Pavilion DV7 (product # ww185av) from Windows 7 to Windows 10.
Since then, the laptop appears on my external monitor (HP x 2511).
The screen remains black.
Laptop computer connection and monitor worked very well just before the switch.
If I P-window and choose "duplicate", the laptop tells me that I don't have the optimal resolution and it changes the screen resolution of mobile, but the external monitor stays black. Somehow, I found once a "detection" option to get another monitor, but windows cannot find a second monitor. I tried to re-allocation of places the connection htmi several times.
I suspect the video driver, because my laptop wonder is no longer on whether I want to change GPU when I plug/unplug power supply. I suspect that it is running low power GPU, and he never liked talking to the screen when executing that GPU. But I have not found a panel that allows me to spend. My video drivers are updated according to windows and hp advisor software. Some HP site says that HP does not support windows on machines more than 10 2 years, one of which is mine.
Any thoughts on how to get the laptop to talk to the screen? Should I just go back to Windows 7?
The expert event is over, no one offers a 'plan B', and my Windows 10 grace period is exhausted.
I came back to Windows 7 and my monitor works fine again.
-
PC HP 8560w: second monitor with Windows 10
I have upgraded to Windows 10 and my second monitor will not work. On Windows 7, I was running my second monitor with a USB 3.0 port. Apparently, 10 Windows does not support this configuration. How can I feed my second monitor in Windows 10 using either a USB 3.0 or MIC port?
Thanks in advance.
I'm running an additional monitor in Win10 to a USB connection, but it uses a USB adapter / VGA, and to make it work, I had to install the drivers that came with the card. Before that I did, Win10 has not even seen the monitor.
Good luck
-
Windows can't verify the Publisher of this driver software
I have a HP a1330n computer
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00572524
my onboard audio is AC 97
I installed an edition of synergy Zotac Geforce 210 1 GB in my PC to replace my aging Radeon Xpress 200 yesterday
My OS is Windows 7 Ultimate 32 bit
I tried to install the AC97 Drivers on their site and
I met a problem when I installed a message appears and it says:
"windows cannot verify the Publisher of this driver software".
I clicked on "continue installation of the driver software".
another and another appeared and so now I just do not understand why Windows 7 won't let me install this driver
Its so frustrating!
Please help I need you guys to fix my problem
Thank you that I understand, my audio integrated is disabled in the bios
-
When I double click on setup a window opens asking a password for an account that I do not know the password to everry time, he rises and I tried my adobe password and my password computer or work
Software Adobe don't require password for installation. It will most likely the security of your computer asking your permission to allow the installation.
-
Original title: Windows encountered a problem installing the software driver for your device...
Arrrrgh! Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.
I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "
The job of printer/copier/fax end but not go on the scanner.
I tried the 'fixes' to epson.com repeatedly with no luck. This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.
I ran the program to 'fix' Microsoft ATS with no luck. It has detected the error and said that the problem has been resolved, but guess what? No, it isn't.
I clicked on install update driver/driver from Device Manager.
I tried the work around, eliminating the "LowerFilters" of the registry. Guess what? You have it, no luck.
So, before I go and buy a new printer/scanner, with no guarantee that they will work. Does anyone have another suggestion?
I am running Vista, 32-bit.
You can also try and replace or install the ntprint.inf file.
I had a similar problem on a Windows 7 PC and noticed that this file was not present. I just copied the file from a different PC Win7. The printer, I tried to install was a Brother MFC-J410w.
The file can be found here C:\Windows\inf
Hope this helps someone.
-
Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.
Signature of the problem:
Problem event name: PnPDeviceProblemCode
Architecture: x 86
Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
PnP problem code: 0000002B
Driver name: nvlddmkm.sys
Driver version: 8.17.13.142
Driver date: 15/05/2012
OS version: 6.0.6001.2.1.0.768.2
Locale ID: 1033Hi, Senga,
Start > right click on computer
Select manage
Click on continue in the UAC window
Click on Device Manager
Click on the + sign next to the device
Right click on driver and select rollback
If the cancellation is dimmed, select uninstall
Close Device Manager
Back to zero computer and Windows will reinstall the driver
Go to the manufacturer website, download the updated driver to update and save it to the desktop
Double-click the .exe file to install
You can also try booting in safe mode with network. Download the following tool and run a scan complete to rule out malware.
-
The following message please just explain?-Windows found driver software for your device, but encountered an error so that to install it. - is - Intel(r) 82566DC Gigabit Network Connection - then he says:-this device cannot start. (Code 10) What this means and how it effects the operation of the computer?-under material network compatible two adapters are mentioned-1. Intel(r) 82566DC Gigabit Network Connection (intel) and 2. Intel(r) 82566DC Gigabit Network Connection(Microsoft)
Hi Mohan kumar,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest you try the steps in the Microsoft Knowledge Base article mentioned below for you receive the error message:
Windows found driver software for your device but encountered an error trying to install it. Setting is incorrect.
http://support.Microsoft.com/kb/940267
Method 2: You can also view the article in the Microsoft Knowledge Base for instructions on fixing the code 10 error messages:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
Let us know if that helps.
-
How can I get the driver for Windows 7 software?
Trying to find how to get to Driver software on my PC. I have Windows 7. Thank you
Original title: software
Moved from the community involvement Center
If you are looking for an application named "Driver support", you're better if it has been removed from your computer. You don't need third-party 'support' for drivers. You should never pay for a driver update.
In general, you need not - and should not - update drivers unless (1) you have a problem and you know a updated driver has a solution to your specific problem or (2) want or need some added functionality that is provided by an updated driver.
If you need to replace or update a driver, you should get it (for free) on the site of the manufacturer of your computer or (if you have a custom computer or your computer manufacturer is no longer in business) from the Web site of the manufacturer of the hardware device in question.
-
So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get. Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.
Well, I found the solution, just in case anyone has the same problem. Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.
Maybe you are looking for
-
After installing the version 36.0 (yesterday) on the desktop and laptop, whenever I go to a site that I get "server not found" and I update the site to access. I checked my firewall and it is configured correctly. And I changed the proxy for 'no prox
-
Compatible SSD for Tecra A8-133
Hello I have a Tecra A8-133 (PTA83E-0E403MBT).To give a kick to my aging laptop, I bought a corsair SSD GTX neutron. Unfortunately, aftermany attempts and a support of corsair, it seems that the SSD is not compatible with this TECRA. I'm ready to buy
-
Cannot start the old motherboard.
Old motherboard installed after 4 years. Battery CMOS was up 2.79 v 3.28. It replaced. Think that I lost the BIOS, because the system does not start; No display on the monitor. No devices still installed. What's next?
-
OfficeJet 4500 - no scan saved - where I can take the patch
Please help me - for officejet 4500 and windows 7 it no scanning cannot be saved! Please tell me where can I get the fix for this solution - developed?
-
I have everything, if records of installation/uninstallation and newspapers since I installed XP. I'm sure that the last set of Windows updates work. Is there a problem with the removal of old files/flies and connects using CCleaner? If not all, can