U310 boot from USB does not work.

Similar Questions

• [Inspiron SE 7720] UEFI boot from USB does not work

  Hello

  I just bought a Dell Inspiron 17R 7720 special edition. It came with a Windows preinstalled 8 (up to 64 bits and mandatory boot UEFI). I want to use Linux (specifically, Archlinux) for the work and Windows for games, so double boot is necessary.

  I'm almost finished installing Linux except for the boot loader: I need to start Linux from UEFI and has failed to do so far. Here's what I did after I got the PC:

  • Secure Boot disabled;
  • updated the BIOS to the version A12 (maybe I shouldn't...);
  • resized the main Windows partition and created a few partitions for Linux;
  • legacy startup mode and managed to start an installation of Archlinux MBR bootable USB drive.
  • most of the system installed
  • switched back to UEFI boot mode, Secure Boot off.

  At the moment, I needed the UEFI kernel startup Setup Bootstrapper to have access to the EFI environment variables. So I created an installation of Archlinux UEFI-bootable USB drive (with a FAT partition) but so far I could not able to boot successfully to this car of UEFI instead of Windows 8.

  I think I tried every single combination, such as:

  • different USB ports;
  • different startup entries created with F2 installation boot, with different parameters.
  • different commands for start-up entries;
  • has hit my startup entries directly in the F12 boot menu.

  Anything in the startmode of the system always the Windows partition UEFI.

  Also, I couldn't find any relevant documentation manual or software on the A12 BIOS on the Dell site, I missed something?

  The solution that the user described in this thread for UEFI boot on a DVD has not worked for me with a USB key.

  If anyone had the same problem or has a solution or even information about it? UEFI is really starting to give me headaches on this machine!

  Thank you for reading.

  Try to go into the Advanced Boot Options.   Hold down the SHIFT key while as a RESTART to win 8.  This will get you to a page that will have an option called "Other devices" (from memory).    Choose that and you will have all features of the device as USB. First of all give it a try and I'm sure there is an easier way to start Linus directly more later.

• Omni 10 boot from usb does not work

  I have omni 10 Tablet, I have a usb with hard disk manager pro, this book with all computers, but with my omni 10 bootable USB drive only. I think the problem was the bios, I tested 3/4 different usb with different or original startup application SO to start installation without success. plesse I would like to know when will be released new bios. my model is 5600el.

  Thank you.

  According to this post http://liliputing.com/2013/10/booting-ubuntu-asus-transformer-book-t100.html : in order to boot from the usb, you must disable secure boot and you need a keyboard also. I hope this post can help you a bit.

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Re: Satellite C660 - One USB does not work

  Hello

  As the title says, I have a c660 that has only a working USB port. The other is dead and has been dead since day 1.

  I tried to uninstall the USB controllers, re-boot and allowing the automatic hardwarediscovery run and install again. This has not solved the problem unfortunately.

  I am running windows 7 by the way.

  Another had a similar problem or has any ideas?

  Thank you

  TFM

  If only a single USB port does not work and if the other is OK then I think it is a dysfunction of the USB port and not related to any software.

  So in this case, I think you should visit the ASP from Toshiba for a verification of the motherboard.
  The USB ports are part of the motherboard and possibly you need new mobo.

• HP 260 G2: USB does not work with W7 x 64 installation ENT

  I have a new G2 of 260 HP, when I proceed to the installation of W7 x 64 USB business, after th e first loading, USB devices does not work. I tried with the utility of th 'Installer_Creator' from Intel, but with the same result.

  You can someone help me with this issue?

  Thanks in advance

  Mauro Caputo

  Hello:

  You must run this utility...

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

  Your only other option would be to use a PS/2 keyboard and mouse to complete the installation and then install the drivers for Chipset and USB3 you need.

  or see this post for an alternative solution.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-prodesk-600-G2/m-p/5485092#M11107

• HP laptop - 15-r101na: hp 15-r101na win7 64 bit usb does not work

  Hello

  I got hp 15-r101na to win 8.1 to win7 64-bit, and you have a huge problem, all the usb ports does not work (although they provide the power).

  I was unable to update the drivers through the "Device Manager", windows just not finding them.

  I tried to download the drivers from http://support.hp.com/us-en/product/HP-15-r100-Notebook-PC-series/7234951/model/7429481/drivers#Z7_M... , but it did not help.

  Maby someone could recommend third-party drivers, or another solution?

  best regard,

  ArnoldasGr.

  Hello:

  USB 3 of the HP 250 G2 driver should work...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5449369&swItemId=ob_132256_1&swEnvOid=4059

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.

• HP Probook G3 450: USB does not work

  I formatted my hard drive and installed windows 7.

  None of the usb drives to work. It is common in the sub player but nothing appears in Windows Explorer, when I plug in a flash drive. When I plug in a mouse, it does not work.

  It is a platform of Skylake has no USB 2.0 driver for Windows 7 does not work. You must install the USB 3.0 driver and probably a lot of other drivers, as well.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7834518 & swItemId = ob_163291_1 & swEnvOid = 4060

  There is a whole page of WIndows 7 supported for this model.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=7834518 & lang = to & CC = US #Z7_3054ICK0KGTE30AQO5O3KA30B3

  Make sure that the drop-down menu to select the operating system is set to Windows 7. I assume that you have installed the 64 bit version.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• out of the box - right panels 2 USB does not work!

  edge 14 news - 0578-65u (hd7200 4gig ram i3 blutetooth and fingerprint reader)

  I have tried reinstalling drivers-, but it basically says that the equipment cannot be installed. can they be disconnected from the factory? (not good)

  Hi oronm!

  Have you tried the latest version of the BIOS? There is a fix for these two ports does not work after sleep.

  I hope this helps.

  Edit: Typo fixed.

• 17-e112dx HP: hp 17-e112dx usb does not work

  I install the new Windows 7 64 bit on this computer: HP 17-e112dx.

  But the USB 3.0 port does not work.
  What can I do?

  Hello

  Here is the link to download the driver USB 3.0 Chipset for your windows operating system 7

  https://Downloadcenter.Intel.com/download/21129/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-7-series-C216-chipset-family

  Write back to us if you need additional assistance. I hope it will work.

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• USB does not work with flash or usb HD drives

  Lenovo T60 with XP Pro. USB flash drive appears in my computer, but must be formatted. If I click on the message in the format software generats the reader would noy be formatted. In properties-> volume are not met. If I click on fill to field will fill with the correct information. After OK everything will be gone. On an another identical T60, everything is OK. In the Manager of-> / place - >... it shows the correct information, the disk is online. Change the letter has no effect.

  With USB HD even more interesting. A (350 GB) HD looks like 3 disks: 2 small HD and one HD unallocated. Yet once, it looks like 1 hd if I connect to other computers.

  Mouse and keyboard work fine.

  I cleaned the reg. for usb devices. After that, if I insert the USB XP key will be detected and will show message that new hardware installed and ready. However, it does not work as I described above.

  I appreciate all the comments

  Hmm,

  In this case I have to reformat all of my usb drives and usb HD even all of them are OK if I use other computers. I'll try it, but this isn't a solution. USB is not a big problem, but what is on USB HD?

  Yes, I get you. Try it on the USB first just to see if it solves the problem. The question is of course with the Windows installation and how it's the disc but, re-setup of can not solve. This way if you still experience the problem after formatting the flash drive you will be one step closer to understand the issue.

• Keyoard USB does not work after unplugging and plugging in (Windows XP Pro x 64)

  I had to move my computer then I unplugged everything, including the usb keyboard and mouse usb.

  The mouse and keyboard have no drivers as they are supposed to be plug-and-play.

  The mouse works well, the keyboard does not work...

  I get the message found material (found the usb keyboard) new then I tell windows to search for drivers but nomatter where I order, it finds no driver.

  There are all the correct drivers that are built into windows.

  Fabrice what connector on the motherboard, I try, it will not find the driver.

  Hello

  • What is the brand and model of the computer?
  • What is the brand and model of the keyboard?
  • The keyboard works on another computer?
  • The computer recognizes another keyboard, if hooked up?
  • The computer is running at startup and shutdown after loading Windows?

  Restore the system to a point when the keyboard worked.

  See: http://support.microsoft.com/kb/306084

• HP m6 1040er usb does not work

  Hello.

  I reinstalled windows 7 Home premium on my laptop.

  And now USB devices does not ' work. In Device Manager I see that drivers are not.  And I can't find the driver in the list of driver http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=ru&cc=ru&dlc=en&sw_lang=&product=5270...

  It is correct. All I need is to install the Chipset Driver AMD