Ubuntu 9.10 and more recent vmware server 2. Will never run after restart of ubuntu.
Hello
I installed VMware server on my box of ubuntu 9.10 (32 bit, P - IV 2.4 GHz, 2 GB RAM). The problem is that he never runs after a reboot, even if the demons are actually being run. If I run the file vmware - config.pl, it does not work because it tells me the vmci, vmmon and vmnet modules are not standard. I then remove these modules, re-run vmware - config.pl and then it works until the next reboot of the computer.
Does anyone have a solution for this problem?
Hello
OK maybe that you have upgraded the kernel version recently?
If you use the standard kernels provided with Ubuntu 9.10, always use this one:
2.6.31 - 15-Generic
Make the installation of vmware server with the kernel version above following the directions I told before. Then, you ALWAYS start ubuntu 9.10 with this kernel version and never use another more recent.
At the moment (as I know), it is the only way to run a vmware server 2 on ubuntu 9.10.
A saludo/best regards,.
Pablo
If upon mi respuesta ayuda, por favor puntuarla considered como correcta o util. MUCHAS gracias! - If you have found this information useful, please consider awarding points for the answers 'OK' or 'useful '. Thank you!!
Tags: VMware
Similar Questions
-
If I want to sell my iPhone, and I restore it, the buyer will never know that I had initialized before?
It will be clean, if you go to settings > reset > erase content and settings
-
Access the interface user Web de VMware Server 2 will crash Firefox 3.5
Hello
Trying to access the web interface installation of VMware Server 2 running on Enterprise Linux 5 update 2 64-bit
using Mozilla Firefox 3.5 on XP causes Firefox to crash.
Previous Firefox 3.0.11 version was able to connect and log in successfully.
Everything in FF 3.5 cach has been deleted before trying to access the user interface. In addition, the certificate has also been removed before.
When you access the UI first with 3.5 ist ask to accept the certificate (identical to 3.0.11)
This will result in a blank page is displayed.
Closing FF 3.5 (clear cache included) and re-open it at the interface of the web UI that causes FF crash.
I m the only one to see this problem with the new Firefox 3.5 access to VMware Server 2 Web UI?
Kind regards
Agent of
Although VMware-server - 2.0.1 - 156745.x86_64 has been out for a while, so I just assumed it was your version.
Silly me
Hope that cure your problem.
-
"" Windows Vista Ultimate 32-bit - VMWare server 2 "will not start.
I tried several times to get VMWare server v2 to install successfully.
There is no error during installation.
However. I don't see any application console in the system tray, I can't access the home page of the server from the links on the start menu, I do not see the mess configuration settings with since I can't access the VMWare server.
VMWare points than running in my task manager: VMnat, VMnetdhcp, VMWare-authd and VMWare-pass
Juggling url paths and others told me to a page where I get my name-user/pass (my windows login, yes?). I enter and it evokes this:
" Web Serviceat VMware Infrastructure" http://localhost:8222 / sdk "does not (Connection Refused). .
How to "do" something? I understand that they went to a web interface, but I'm unable to access the web interface.
I'm trying to give as much info as I can, but there is really no other info.
Wergeld
Post edited by: sum
Hello
VMware Server Web Access (tomcat6) works just as well? (I think - Yes - but I want to be sure)
Check the host for IPv4 entry file: 127.0.0.1 localhost
You use the Web user interface as an administrator?
J.
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
I'm not sure to understand the difference between the versions of 3.6 and many 9.0.1 version. I have much more trouble with this new version - actually had to uninstall it because it kept crashing. I understand that there are more bells and whistles, but what is the advantage of the most recent on this old reliable version?
See:
-
Copy and export to VMware Server ESX 3.5 2.0
I have a client who wants to copy on an ESX host 3.5 existing out of our data center and use it as a test running server in its server system 2.0 VMware to the internal address. Can I export on the VMDK using SCP and then give it on a USB? If so, how I do, never had to export outside the Virtual Center environment before.
Thank you
Use VMware vCenter Converter or version independent and free to export the comments of ESX. It will make the necessary conversions for you.
http://www.VMware.com/support/converter/doc/releasenotes_conv401.html#Interop
AWo
VCP / VMware vEXPERT 2009
-
Problems of performance and more recent PPAPI Flash Player free?
Hello
I recently noticed some pretty serious performance issues in the latest versions of PPAPI Flash Player in Chrome.
I use:
- Windows 7 64 bit
- Version of chrome 41.0.2272.101 m (64-bit)
- Flash Player Version PPAPI: 17.0.0.134
I noticed a sharp decline in performance recently when updating of Chrome, I've been using Away3D 4.1 (using Stage3D) to create a series of generative Art experiments, if you check out the one below that I found in Internet Explorer and Firefox (using the version of the Flash Player NPAPI), the performance of FPS on my system is about 35-40 fps for me , but in drive PPAPI of Chrome, it fell drastically to all about 6 or 7 fps.
Recently I updated my version of Chrome, so this is a recent change... around a few weeks ago, that this content was working fine in Chrome, around 35-40 fps even I get in other browsers.
Did anyone else out there see these performance issues with recent versions of the Chrome PPAPI Flash Player?
That's the good news, thank you for the update. We work closely with the team of Chrome, and there were corrections of the performance of both sides. I have to debug it to understand which give, but it is good to know that things are trending in the right direction. We would certainly reach parity with NPAPI in terms of performance (he has often a trade-off between security and performance), and we will continue to target for earnings opportunities wherever they present themselves.
Thank you!
-
recently when I open acrobat pro 10 message appears on my screen the ADOBE SOFTWARE YOU ARE the USE only IS NOT AUTHENTIC. because I paid for this app a few years ago, that I do not understand why I now have a software not genuine. Help!
"
Adobe told us the following. That people sometimes sell authentic product, they are not allowed to sell. For example, they buy a commercial license for 100 users, but then sell them as separate products. Also sometimes it consist of numbers by a secret method. They use all sorts of tricks. Subsequently, Adobe reported that the licenses were sold unauthorized. What can do? Of course, they block this license for which they were not paid. This leaves the buyer who has been scammed, in a hard place. But unfortunately it is the case that if you buy something stolen, even after many years, you can lose it without refund.
If you have purchased from a reputable provider, please contact them on this subject. If you bought on eBay, you can expect this kind of thing.
-
as above
Hi graham50,
I suggest you to go to the link below and perform a startup repair and do a system restore and that might take care of the issue.
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
Go to the link below for the procedure perform system restore.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
Concerning
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Hello
I just bought my HP laptop 2 months ago. Everything was fine, quick and convenient until the market a few days ago, it prompted a message saying that I need to update it. So I did, and thereafter, all my installed applications like Skype, internet browsers, etc., have disappeared. I tried to reinstall applications and all goes well but a bit slower. I thought that I needed to update some applications to improve performance, so I checked for some and tried to install the.
Then yesterday, when I tried to open Microsoft Publisher, my laptop suddenly froze. The mouse and the keyboard didn't work so I had to turn off using the power switch. And every time I turned it on, everything was just slow.
Can you help me solve the problem? Also, can you help me to speed up its performance?
Thank you very much in advance.
Hi @blissss ,
Thank you for visiting the Forums HP's Support and welcome. I will do my best to help you. I read on your 14 HP - laptop r024tx with slow speeds. Thank you for all the information on what is happening.
Something is slowing down the laptop. Have you installed some antivirus or firewall? If you disable what are your speed better. I got a DVD in my notebook that has slowed the process of starting a lot. You can check this.
Here's a document on improving your system.
Make sure that all updates are completed within the control panel or click the Windows key and start typing the laptop settings, then go to update.
Please let me know how it goes.
Thank you.
-
Explore 9 and Windows Mail - Windows Mail emails will not print after installing Internet Explorer 9
As soon as I installed explore 9 print not in my emails to windows messaging
Hello
1. what happens when you try to print e-mails through Windows mail, you receive error message?
2. not this problem only occurs when you try to print emails from Windows mail or with applications?
Step 1: Follow the steps in the link given below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows?T1=tab02
Step 2: follow the steps in the link given below.
http://support.Microsoft.com/kb/973479
Hope it will be useful.
-
Convert new Vmware server for VMware vSphere Hypervisor 3.5
Hello
Can someone tell me how to convert a more recent VMware Server to make it work with an older VMware vSphere Hypervisor 3.5?
I just installed this version on an old IBM xseries 346, but I can't turn on the virtual machine. When you check the log it is said that the version is not compatible.
Can you also tell me how to get rid of the warning of a 60-day trial. This version should be free?
Thanks in advance
You must go to the directory of the virtual machine before you can issue the vmkfstools command.
CD/vmfs/volumes/datastore1/MSTS01
André
-
Conversion of computer virtual vmware ESX4I and windows product activation server.
Hello
I tried to use vmware vmkfstools and convert import vmware server VM to ESX4i, none of them will cause Windows VMs to product activation trigger with no grace period windows so I can't use VMs on ESXi. How you can work around this problem. I guess that I searched a lot on this subject, but no clear answer found to date.
Thanks in advance
MS may have made changes in their software to detect the cloned software and changes to the underlying host.
http://www.VMware.com/solutions/whitepapers/msoft_licensing_wp.html
-
Graduating from VMware Server to ESXi
As I said in another forum, I take my virtual business and contemplate the correct path. After reflection, I feel that vSphere Essentials Plus may be the 'end of the road' for us. This end of the road is several months, or even years, away. I want to do is expose the plan of base here and let you guys and girls look over and tell me if I'm off track.
Currently we have three hosts, one running VMware Server 1.02, another running server 1.06, the last and most recent is running Server 2.01.
I bought a new server with another machine which is the equivalent in power, but not under the name of storage space. Currently, it is not used. So basically, I have four machines capable of being the host machines. In addition, when I am finished with an Exchange migration, I have yet another machine with enough power to be a host.
While I have a lot of machines available, I think I'll only be using a total of three machines in the end. The two most recent machines and the current Exchange computer. The rest will be moved to other functions or simply disappear (EBAY FTW!).
My plan is to install ESXi on the two most recent physical machines. Move more, if not all, of my current virtual machines for them. If necessary, I'll pull the Exchange machine retreat in the mix for a total of three ESXi hosts. For a period of time, I will simply use ESXi hosts and the customer vShpere to control. When I find it is unmanageable, I'll add vSphere Essentials Plus and a SAN to the mix for my goal of end of maximum availability, fault tolerance and manageability. Obviously the big breakpoint as soon as now the San that this single purchase would consume most of my annual budget.
In any case, the only thing I like about running VMware Server ESXi vs is that it runs so that I can directly access files of the virtual machine on the host computer for backups, etc.. From what I see, if I install ESXi on these hosts, I won't be able to move, copy, back up virtual machines in a very easy way. I have read, it can be done with the remote command line Interface, but I'm having a time difficult to determine if it works with ESXi or not.
So here are my questions:
(1) anyone see anything wrong with the plan?
(2) understanding that I simply can't afford a SAN and vSphere Essentials most right now, is there a way I can safely access the virtual machines on ESXi for backups? This can be automated?
(3) looking forward, what is the less expensive, more powerful SAN for up to 3 servers? I think maybe a Dell MD3000 or possibly a PS4000 EMC.
Thanks in advance for taking the time to help me.
Kevin L. Collins, MCSE
The Systems Manager
Nesbitt Engineering Inc.
> 1). Anyone see something wrong with the plan?
ESXi has limited hardware compatibility list, so first you must make sure that esxi will work on your hardware. HCL is a list of the certified material, so your host doesn't have to be on HCL, but NIC and RAID cards must be.
> 2). Understanding that I simply can't afford a SAN and vSphere Essentials most right now, is it possible that I can safely access the virtual machines on ESXi for backups? This can be automated?
Yes, but you always buy the less essential to use VCB.
> 3). Looking forward, what is the less expensive, more powerful SAN for up to 3 servers? I think maybe a Dell MD3000 or possibly a PS4000 EMC.
Take a look at storage from IOmega.
---
MCSA, MCTS, VCP, VMware vExpert 2009
-
To hardware Version 7 computers virtual in VMWare Server 2.0.2 ESXi 5
Hello world
Taking his retirement from 2 host vmware server computers. They run Server 2008 64 with VMWare server 2.0.2. Each host has 3 VMs Windows, 6 in total, all configured with Hardware Version 7
The plan is to set up a new host running ESXi 5. Install, configure and ready for deployment. After you have configured the data stores, I want to spend my VMs the 2 old servers a new box of ESXi 5.
I'll copy all virtual machines from the old servers to individual folders on my Windows 7 Desktop and use the vSphere client to load the virtual machines on new data stores.
I read that ESXi 5 can read Version 7 VMs. Does this mean I can use the virtual machine as is, or still need to convert the hard? I would like to convert them before their download? I'm a little gray in this area...
Can you get it someone more experienced please let me know the step by step... or a link to a good "how to" I would really appreciate it.
Thank you
There is nothing for you. VMware Converter takes care of this. It will not only increase the size of the disc, but also the size of the partition.
André
Maybe you are looking for
-
The favorite button does not appear in my browser
The button is supposed to be next to the home button, but he's not here
-
Envy 17 t-k200 k4t90aar: where can I find a replacement motherboard
I was informed that my HP Envy 17 t-K200 CTO probably has a broken mother. When I tried the HP part Store I learned that there are two tips listed. They are 793272-601 and 793272-501 part number. The parts store also tells me I have to «Contact de
-
How to remove original pictures of the iPhone after sync with computer
Once upon a time, after syncing my iPhone with my computer (via iTunes), I would get the option ' remove the originals of the phone? These days I can't find any setting that allows me to do. Is this now sort to automatically delete the originals of t
-
How to draw a color instead of cwColorSpectrum
I use the .VI tubular line to draw the removal of a person with the GPS in a 3-d chart. Now, I would like to draw this tube with a single color and no shade I could choose to represent and to differentiate each person. I can't find how to do it wit
-
This is why I hate to let people use my laptop because it was totally fine before, now iv noticed the start menu and the bar at the bottom of the screen with my programs in switched to a classic display, I thought I'd be able to switch back to the up