"" Windows Vista Ultimate 32-bit - VMWare server 2 "will not start.

Similar Questions

• Windows Vista Home Basic Edition keeps looping and will not start

  Windows Vista Home Basic Edition will not boot to the Welcome screen. It keeps restarting loop. I tried to go into safe mode, but who does not start too. Loops of safe mode and return to the start screen.

  I have a dell laptop and I just restalled operating system. I had Windows Update set to automatically download and install. PC worked great until the next day (after the time programmed for automatic updates). I'm assuming that the started after some windows updates when installed. Unfortunately, I can not enter in Windows or Normal or Safe Mode.

  Bill

  If safe mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Windows VISTA Home Prem on DELL Inspiron 1521 will not start

  Read the message below. It has been copied from another thread and the poster has been informed to start a new thread with his question. What is ironic, is that I have exactly the same problem on my Dell.

  After downloading some updates to Vista my Dell desktop computer restarted and tried to load step 3 updates, it moves very quickly from 0% to 100% and then restarts, only to go back into the same loop of trying to set up step 3 and restart.

  I tried the following, starting in safe mode, same results updates are trying to configure.

  Auto repair, I am told by a message, it cannot be repaired.

  System Restore, I have only 2 system shown to restore points and they are at the time of the upgrade, if I try these points to restore I get an error message.

  I tried to reboot from the original installation provided CD but all I get is 'windows is copying files', then a black screen.

  I tried the boot iso but neosoft option again to the message windows is to copy the files, and then the black screen.

  I'm in thr stage where I can not think of anything else other that to go to a data recovery specialist, to recover the files most important (have over 200 GB of various things on the hard disk) and then reset to factory settings and load data and try and find the sources of all the programs that I had. It looks like an enormous task and it is the main computer for my business. If a kind soul has suggestions as to how I can get this situation somehow, I would be eternally grateful.

  Thanks in advance

  I'm fairly warned to get to a point to get my data before a complete reconstruction, however, I give that easy. Anyone else having this problem. I'd really like to find a way to solve.

  Hello Jon LIndquist,

  Thank you for using the Microsoft Answers forum.  The link below has several options to solve a similar problem.  Please use the link to solve your problem.

  http://support.Microsoft.com/kb/949358
  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Ultimate 64-bit SP2 becomes error 80070490 in windows update

  I have Windows Vista Ultimate 64-bit SP2.

  Get the error 80070490 Windows update installs.

  The following recommended by what could find did not work:

  I tried Microsoft Readiness tool several times without success.

  I tried to use my drive Vista system with the help of the option UPGRADE as many times and always without success. The upgrade option is still grayed out.

  I did a new INSTALL 2 different times.  I then run the update of Windows, over and over again at every reboot of levels. I always come back to the same level and get the error 80070490 on following 9 updates:

  Update security for Windows Vista for x 64-based systems (KB2564958)

  Update for Windows Vista for x 64-based systems (KB970430)

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2604094)

  Update security for Windows Vista for x 64-based systems (KB2378111)

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2686833)

  Update for Windows Vista for x 64-based systems (KB2345886)

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2656374)

  Update security for Windows Vista for x 6

  How to cross this error 80070490

  Hello

  Thanks for posting in the Microsoft Community.

  1. you did make an image backup?

  2. what type of installation are you running?

  Please see the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070490

• 26 of Firefox crashes out of Windows Vista Ultimate 32-bit.

  No matter if I click on the red X, go to file-> exit or press Alt + F4 to exit Firefox under Windows Vista Ultimate 32 - bit. It almost always produces an error message that Firefox has stopped working.

  I can't find how to post a JPEG Screenshot of the error here.

  This will not occur under Windows XP Pro.

  Otherwise, the browser works fine in a BONE.

  Those are the two reports of the crash on Adobe Flash Player.

  You can check for problems with the latest version of the Flash plugin and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• Satellite A200 (PSAE6) crashes on Windows Vista Ultimate 32-bit

  Hello

  I recently had a few frequent freezes on Windows Vista Ultimate 32-bit Edition, I think it's maybe the video card (ATI HD2600 mobility). I have already downloaded and installed the latest drivers from the Toshiba site, but it continues to, sometimes, when I'm playing games, the screen blinks for 5 seconds or more and then would become black, completely erased, but the background sound and everything still works well and I am able to shut down the PC by pressing the power button once and then restart it normally.

  It's a minor problem, the major problem is the freezing point, it freezes completely without warning, but oddly enough, he freeze by practicing a game! But freezes on normal operations (internet, office, etc.). I did the tests, tests of HARD drive memory, all in good health, and worse, on the Windows Event Viewer could not detect any problem, simply says 'unexpected system shutdown.

  I'd appreciate help please.

  Thank you

  Hi I do not know if this will help, but you've got service pack 1 installed on your laptop, as when I installed it on my desktop the first time it caused blue screen errors and gave me a lot of problems, including the error messages that seemed to come with applications, I opened and a boring IQRL driver equal or less than but could not work why and then ultimately , I had so many problems that I had to completely reformat my office and I removed my scanner XP and webcam (both had vista drivers) and when I reinstalled service pack 1, it was beautiful, if by any chance do you have anything attached to your XP laptop and vista drivers as these seemed to be what was causing my errors.

  Also a question about your graphic card drivers, I have the same laptop as you and was looking for updates to the graphics driver and couldn't find them anywhere on the site, where did you find yours? I use Vista Home Premium 32 bit, my model number is A200-28 p (PSAE6) and I would like to know if there is a new graphics card driver but can not find on the basis of knowledge, so the fact you have updated your would be could you point a new user in the right direction :-)

  Thank you

  Simreaper

• Arabic Language Pack for Windows Vista Ultimate 32-bit

  Dear Sir/Madam

  There was a 'Arabic Language Pack' available on Windows Update for Windows Vista Ultimate 32 bit, but when I installed SP2 for 'Vista Ultimate' is now gone from the Windows Update Page, so where can I get it now?

  Thanks in advance
  Yours sincerely,
  Elsharif

  Assumed as replied, without other added messages

• Windows Vista Ultimate 32 bit product key

  I bought an upgrade to Windows Vista Ultimate 32 bit used one month without the product key. I have two more days to activate windows. Anyone know where I can get a product key?

  Hello

  Microsoft sells more than Vista.

  You will have to take a chance and buy a DVD / a license on Amazon, eBay, etc.

  Be careful when you run the risk of buying pirated software.

  See you soon.

• How can I activate speech recognition on my Windows Vista Ultimate 32 bit? There is no advanced speech Options to configure.

  I tried to activate speech recognition on my computer (Windows Vista Ultimate 32-bit) but I can not because when I open the Control Panel, speech recognition options, I see on the upper left corner "text to speech" and under the "see also": "ease of access"and"Audio devices". Is it possible to fix this?

  Hi Marios,

  Speech recognition does not either with the English language or Greek as the operating system is in Greek.

  Speech recognition is available only in English, French, Spanish, German, Japanese, simplified Chinese and traditional Chinese.

• Windows Vista Ultimate 64-bit goes to a black screen after login. Completely insensitive.

  I seem to have a problem similar but different enough to justify a new thread. I am running Windows Vista Ultimate 64-bit, and after the connection, I get a black screen with a cursor that can move normally. However, it becomes more complicated as everyone else. Absolutely NO work of access keys at this point, ctrl-shift-esc, ctrl-alt-delete, windows-r, don't SHIFT five times, NOTHING that other threads have suggested. I can't do anything but restart the computer once it reaches that point.

  This is where it gets weird. Regular Safe Mode actually works for me, but is not the Mode safe mode with networking. There has been absolutely no sign of difficulty with this computer before that. I already have Malwarebyte Anti-Malware, it has been updated yesterday. I checked for ntndis in the registry, nothing. I uninstalled my video drivers, now, I have to reinstall because it wasn't the problem. System Restore was only a restore point on March 1, which did nothing even though the computer was working fine, March 1. I do not have the Windows disc, I split the cost with a friend who's in Arizona that I know, and he has probably lost the drive now.

  Please help, my office is useless like this. I'm on a laptop, and I have a 512 MB USB key, if something needs to be downloaded on the desktop.

  Hello

  1. go to your router manufacturers website and make sure you have the latest firmware for it

  2. go into your Web site computer and makle manufacturers you have the latest network adapter drivers

  3. read this

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• How to start VDS in Windows Vista Ultimate 64-bit?

  I have a problem, and it's been a while and still not solved...

  I have Windows Vista Ultimate 64-bit right now and I want to upgrade to Windows 7, but installation is NOT going through perhaps because of the virtual disk service.

  How to START the virtual disk service? Everytime I try through services, I get an error 3: the system cannot find the path specified.

  Please tell me HOW to start the virtual disk service. and please do NOT move this thread on the forum windows 7, I posted in the front Vista section and moved to the region of Win 7, where my problem has not been resolved. Please leave it in this section. Thank you.

  Ok. The file is in the right place. The registry is missing the path to
  the file. Wonder how that happens - sigh?
   
  Type Regedit in the search box of the start menu.
   
  Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\vds
   
  Right-click on an empty area in the right pane - choose new - extensible
  String value. Name ImagePath (F2 key renames it). Double-click
  ImagePath and assign
  %SystemRoot%\System32\vds.exe
   
  Now you can start the service?
  --
  ..
  --
  "Jouho" wrote in message news: b35bf627-5 c-4 c 17 72-91df-57439b0880bf...
  > Thanks for the reply!
  >
  > Here are 2 pictures of 2 orders that I put in the command prompt, which
  > that means?
  >
  > http://oi54.tinypic.com/330chll.jpg
  >
  > http://oi55.tinypic.com/x0ohhi.jpg
  >
  >
  >
  > Thank you
  >
   
   

• cannot activate windows vista ultimate 64-bit it says error code: 0xc004E003

  activate Windows vista ultimate 64 bit

  cannot activate windows vista ultimate 64-bit it says error code: 0xc004E003

  Hi Jarska,

  ·        You did changes to the computer recently before the issue started?

  ·        If your computer came pre-installed with Windows Vista, or you don't have it installed separately?

  You receive this error 0xC004E003 when the Software Licensing Service reported that license evaluation failed on your computer. You can access the link below and follow the steps in method C and check if that helps you solve the problem of activation. If the C method does not work, you can follow the steps in method G and try activation using the automated phone system.

  http://support.Microsoft.com/kb/931276

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Ultimate 64-bit will not be in service

  Windows Vista Ultimate 64-bit will not be in service.

  I read the other posts and have followed the suggestions. Windows does not start without failure, or any other option in the F8 boot options. Next step is to create a disk to repair windows, Dell did not provide a when the computer was purchased. Can work from any vista repair disc, or I need to find one suitable for my windows edition? Where are these on the Microsoft Web site?

  Thank you!

  Thanks for the help. Sorry for the vague information. I was finally able to diagnose memory problems. I have reset the chip memory and repaired the computer by using the option "repair your computer" F8.

  Once again, thank you for the help.

• error 800b0100 windows update KB2660649 - Windows Vista Ultimate 32 bit SP2 installation - solved

  Original title: 800 b 0100 KB2660649

  • Run Windows Update on Vista Ultimate 32 bit SP2 under BootCamp on Macbook Pro
  • Trying to install KB2660649 by using Windows Update
  • Difficulty is unable to install - response 800b0100
  • Running sfc/scannow - successful, no error
  • Have downloaded and run the update tool system - successful, no errors
  • Downloaded and run the stand-alone version on the fix - failed, and saw the following in the system log: Windows Update 'A security update for Windows (KB2660649)' could not be installed because of an error: 2148204800 "no signature was present in the subject. (Command line: "" C:\Windows\system32\wusa.exe""C:\Users\steve\Downloads\Windows6.0-KB2660649-x86.msu"")
  • Tried WU and seen the following in the system log messages: b Windows Servicing began a process of change in package KB2660649 (security update) State of Resolved (Resolved) to Staged (Staged) (b) Windows Servicing has not completed the process of the configuration package KB2660649 (security update) in State of Resolved (Resolved)

  Any ideas anyone please?

  Amazing!  I have already mentioned that I lived the problem of the "feature Windows empty window.  Seeing that my initially reported problem and seemed to have similar signs and given that I had a clear explanation on how to solve this problem, I did it - and these two problems are now history.

  In the two following links, you will find the description and method to solve the problem of the 'empty Windows feature window' and (b) a method for appropriating errant registry entries.

  http://www.Raymond.CC/blog/fix-blank-or-empty-list-in-Vista-turn-Windows-features-on-or-off-optionalfeaturesexe/

  http://www.Raymond.CC/blog/full-control-permission-to-delete-or-edit-restricted-Windows-registry/

  This * may * solve your problem too - it seems that there is a generic problem with determination rather poor problem feedback.

  Good luck and thanks to all who contributed

  Best regards, Steve

• Windows vista ultimate 32 bit OEM

  I am wanting to install vista ultimate 32 bit OEM on my pc that I screwed up the download of Windows 7 beta. I come to the world of pc to buy and they told me that I have to take my pc to them for them to install it for a fee. They told me everything you get in the box is a key code and no disc. Could someone tell me if this is correct?

  Concerning

  Seansnr

  Hi Seansnr,

  First of all, if you buy a copy of Windows Vista OEM, make sure that the DVD is the company that allows a computer.  An OEM Dell DVD won't work on a HP or gateway and vice versa.

  Personally, if I had to buy it I insist on a DVD and not from someone who says they can install for a fee, and then provide would not buy any media where you will need to re - install in the future.

  You could also buy a copy of the sale at retail of Windows Vista, or order an OEM DVD from the manufacturer of your computer.  They can also provide one for a low cost, if it wasn't origionally came with the computer.

  If you are interested in a copy retail, they may be ordered and even downloaded directly from Microsoft.

  http://store.Microsoft.com/home.aspx

  Hope that answered your questions.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.