UH 01 and black spots on the 6 d nag screen

Similar Questions

• Black and white spots on the screen

  We have a model 1510 X projector.  Recently white and black spots appear on the projected screen.  They are now more and more people.

  What is a sign that the world must be replaced or another problem altogether.

  Hello, this is the same problem that I have on my other projectors, bad chip DLP from Texas instruments. The models are 1209 s and 1610HD, in Total, three with the question. They are not guaranteed bought towards the end of 2009 and dell will not extend the warranty nor will they provide a chip DLP replacement through TI through their 5 year warranty on the chip, if you contact TI they will send you to Dell, I am frustrated by this, because there is no resolution. The repair depot wants more than 600.00 to fix all of them. They have less than 500 hours on each and original lamps. I think that Dell needs to get by with the TI to cover this issue. I won't buy an another brand projector Dell, and I will make sure everyone I know will never buy one. I am fortunate opportunity staring the unit, but they will not even an exchange of pieces. These DLP chips make defective on any brand, it's just how the manufacturer will take care of the case. Samsung will replace free problem specific models and stands behind the TI warranty even if the units are out of warranty of manufacturing. Unless you have purchased an extended warranty through dell that you're SOL, unless there is a class action to solve the problem. DO NOT BUY DELL PROJECTORS! Jerry

• How can I fix black spots on the camera in 9.3.5 iOS?

  How can I fix black spots on the camera in my iPhone 6 Plus? Please help me.

  You see the same locations if you take a picture out in the open?

  It's more like flares of the lens, because of the light coming from one side of the room and hit the lens at an angle. If so, it is an optical phenomenon and cannot be resolved.

• My ip6glass Panel is the lifting of his body. There is a black spot on the left corner. How much would it cost if I go to the Apple Store because my warranty is expired. I heard that they would replace it for free even if the warranty has expired. True or

  My ip6glass Panel is the lifting of his body. There is a black spot on the left corner. How much would it cost if I go to the Apple Store because my warranty is expired. I heard that they would replace it for free even if the warranty has expired. Is this true? Thank you

  Sorry, but at least the screen needs to be replaced. Do you have the battery exchanged in the past?

  Visit an Apple Retail Store or an authorized Apple Apple Service Provider next to your place to achieve this.

  You can also contact the Apple Support to send it.

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

  Pricing of the service repair screen

  Repair and replacement costs depend on your iPhone and your AppleCare products cover model. Apple runs a diagnostic test to determine if your iPhone has suffered additional damage. If she has, or if she needs more repairs, you may have to pay out-of-warranty service. Accidental damage is not covered by the Apple one-year limited warranty.

  Model	Screen repair cost
  iPhone 6	$109
  iPhone iPhone 6s 6 Plus, iPhone 5 s, iPhone 5, iPhone 5	$129
  iPhone 6 sec more	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during testing. Pricing and terms vary for the service by an Apple authorized service provider.

  copied from answer Service Center - iPhone

• Visible, thin and black lines around the layer mask.

  Hello, in a current project I'm finish, there visible, thin and black lines around the perimeter of each layer. These layers have layer masks. I tried to merge the layers (shift, ctrl, alt + E) and flattening, but the lines are still visible. Help, please!

  Thanks in advance!

  Photoshop CC

  Windows 8.1

  3.7 ghz I7

  64 GB of ram

  1 gb player/os ssd

  16 TB Raid 3 array work / scratch

  You must read and watch tutorials masking. Look at sites like Russell Browns to topics such as advanced masking and extraction and practice. Sometimes its inpossible create a very good mask in these cases, you need to fix it

  

  

  full size link http://www.mouseprints.net/old/dpr/TryHard.jpguse open the link in a new window or tab.

• Satellite A205-S5825 - a few brown spots in the corners of my screen

  Hi, I noticed for a few days there are a few brown spots in the corners of my screen. They are behind the screen, nothing has been overthrown. Anyone has any idea what this could be?

  Thank you

  Hello

  First of all, you should tell us which laptop computer and operating system you have.

  I put t know what the reason is for this, but first you must simply determine if it s a question of internal or not display. Therefore, you must connect an external monitor to your laptop and check the top image.
  If you n t have the same question it s a problem of display internal and I think that it should be replaced.

  Welcome them

• Large black spot on the page and pasteboard

  I use CS3, InDesign worm. 5

  I have 100 pages (type, a book page 440), with a large, 1 x 3, solid black spot (a double sequence) that extends from the top of the chessboard of paste into the document of 1.5 inches on a single page. Sometimes it disappears, sometimes it reappears. I exported the file to PDF (for printing high quality). It was not visible in the PDF, but it printed (printing of digital book CreateSpace).

  The task cannot be selected, moved, etc.

  The file contains four layers. The task is primarily associated with a single layer. However, when I turn this layer or all the layers off the coast, only the part of the task inside the text box disappears. The part which exceeds the frame of text on the page and the remains of cardboard.

  The blemmish appeared during a crisis of sneezing (allergies) while I was working on the document. I touched or that you clicked on something, but I have no idea what.

  • I moved out of the page, the text block, and a new time, not linked, given. Most of the task moves with the original text block (everything that was inside the frame and the part on the outside). I made a new image and the task has returned - now in two locations: in full size on the page, and most of it on the block of text on the pasteboard.
    
  • I deleted the page, created a new page and created a new block of text. As I entered the new text, the task has reappeared.
  • I exported the File Interchange format. The task remained.
  • I deleted the default settings of InDesign and saved data files. The task remained.

  I can cover it with a full framework of white: However, I do not know if it will work in fact when the book is printed. And if this is the case, I can't delete the part that covers the text.

  Walton

  waltonm wrote:

  I've linked a copy of page problem here is a postal fold of the indd file packed; Therefore, the fonts are included.

  Walton.

  I exported the IDML file and also as RTF. Opening the IDML retained the task.

  Placing the RTF into one new file has also retained the task; even if the fonts were all gone, the glyphs appeared in applied fonts. A strange thing is that the police of DickChamberlainsDeathF na not show coloring and missing fonts in the menu drop-down police in Control Panel, there is no brackets around his name (parentheses indicate missing fonts).

  Someone at - he a clue about this strangeness?

  I exported the text file. The form disappeared when the text file has been placed in a new document.

  Then, I reapplied the fonts for the text - named police has been applied to all paragraphs in the police force. No character.

  The default size is 12pt. I've selected all the text in the frame and increased the font size to 15pt and BINGO! It's BAAACK! He remained as I unstapled each action step by step.

  I suspect that the task is triggered by a character in one of the fonts. It does not go away when the fonts are changed to fonts known to normal. If these fonts are not major fonts foundries creations, or if they have been changed by a scientist crazy fonts, the problem is probably a calculation error in the view of the police.

  If you want to really find the source of the problem, I would suggest to start with a new file, set the default to a known a type font, course new samples of text for a set of glyphs, copy and paste the glyph to make enough for your samples, and then save this file, and then save it under a new name. One, apply a suspicious police to a set of glyphs. Save under a new name that indicates the applied font.

  Open the first saved file, save it with the name of the second font that you want to test. Apply this font on the second set of glyphs. Save again.

  Browse through this routine until you have a set of files which have all games of glyphs, but that one policy applied to each file. If the task has not appeared, start back in the first file with a font applied. Select the text with the applied font and change the size from 15pt point. If that does not cause the problem, save the file as a new file with 15pt in name.

  Repeat this test for all files. If the task appears, you will have an idea of what font causes.

  If the task has not appeared, start over with the first file who first applied at 15 PT fonts, save it under a new name. Select the second group of glyphs and apply the second font. Record. If no stain, increase the font size of the second group of glyphs to 15pt. If no spot, save and repeat with all other files, apply the n - th police to the n-th glyph group. Save new names. Change font at 15 PT etc.

  If still no spot, start over with the first file. Register a new name. Apply every nth font in each group of the n - th glyph, in this one file. If this does not display imperfections, try the same strategy with the remaining files.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• Black spot on the camera

  When I use the camera, a black dot appears on the right side (when you hold the phone horizontally).

  I took a few pictures, a few minutes before the black spot appeared. West nothing on the lens. There might be a microscopic piece of dust inside, but I HIGHLY doubt it.

  I ve heard from a few people that is probably not a physical defect, but a real question much experimented with iOS 8.

  I m using the latest version of iOS, but they also heard some experience the same problem there.

  Any suggestions?

  just to learn, put the dust on your camera and take a look.., well he cant focus just that close, but you may notice theres no way it is dust! However, if she still something to do with the material, as this would mean that the sensor burned some pixels, but this usually happens only if you cam laser or try to take pictures of real welding close or things like that... If you don't have these bad things to your camera, it could be the connector.

  But it is unlikely, even if I had exactly this problem of connector camera back in the day with my 3gs.

  But just because these newer iDevices use screws to attach the connectors its very unlikely!

  If the restart does not work try a little touched the phone and check if the point changes or even disappears. If who have some influence the sensor may be broken since you have this iphone or this is the connector as I have just said.

  If nothing changes by slapping, etc. shaking your phone you should try to restore your device via itunes

• Satellite M30-853 - vertical white lines or black spots on the screen

  Hello

  I have a laptop Toshiba Satellite M30 - 853 during nearly four years. A few days already, I'm having a problem that they come from the white lines vertical or black spots or screen is smear when I am trying to move a window from time to time. My wireless adapter is in use.

  The vicinity of processor, video card and wireless network card are very hot. My cooling fan is starting and stopping, but I'm not sure of its effectiveness.

  I disassembled the laptop to clean it if there is little to dust, but I found it in very good condition. Anyway, the problem persists and I am looking for decision. Someone told me that probably that's because of the defective video card memory. It's strange to me because the problem is not permanent it is often and if I try to cool the surface it disappears.

  I'd appreciate any suggestions.

  In my opinion, these issues must be verified correctly. This can be done using different diagnostic tools. It is important to know what the problem cases.
  Of course, it has something to do with the temperature of material and graphics card. Sorry but I'm really skeptical, you can do something alone. Maybe you should seek professional help.

• Tecra M4 - black spots behind the display Tablet cover

  After an intense action of cleaning every month, I recognized a few black dots on the back side of the front glass of the tablet. I did some checking of finger on the screen to see if it's a pixel error. I can say with any doubt that he is not a pixel error.

  After a Google search I found people describing the same. It is assumed that it is the result of fan heavy work.

  Y at - it no support out there that can help me solve this problem?

  Hello

  I put t really understand the link between the black dots on the screen and the heavy work module cooling.
  For me this internet s nonsense provides a lot of information useful but also very stupid gossips, myths and stories

  Always it is that you have a few black pixels on the TFT display and it sounds like a hardware problem.
  So in this case, there is only one solution; This part is replaced or repaired I guess, it should be replaced

  For all replacements, you will need to contact the ASP in your country. Ask them to help and managing others.

  Good bye

• Satellite P750 - grey and black stripes on the screen

  Hello

  I BOUGHT MY NEW TOSHIBA (3D) AROUND A MONTH AGO P750
  AT TIMES RANDOM SCREEN WILL BE BANDS GREY AND BLACK HORIZONTAL AND VERTICAL
  IT IS GETTING WORSE FROM WHEN HE STARTED
  ALSO WHEN PUT ON THE TOSHIBA START LOGO ON SCREEN BEGINS TO BLINK
  SOMETIMES PASS THE SCREEN WIL HELP.
  NOT VERY HAPPY AS ITS NEW BRAND.
  COMPUTER LAPTOP MOVES FOR EXAMPLE HIS USE NORMAL OF A HOME WORK.

  ANY IDEA WAT I HAVE TO DO?

  In my opinion not only make sense for you is to contact your local dealer where you bought your laptop or a provider of services of Toshiba directly.

  You have for laptop with a valid warranty and if something like this happens, it must be fixed, or you should get the new laptop.
  Call the service, ask for help and I'm pretty sure that they will help you with that.
  Do you know how to find Toshiba service in your country?

• Purple and green spots with the Nikon D700 raws

  I'm getting some purple and green spots (mostly purple) with Nikon D700 raws using the profile "Camera Standard". This often happens when the sunset-ish shots. The problem goes away when I select the 'Adobe Standard' profile.

  I just tried ACR 6.3 RC and the problem persists. is this a known issue?

  Would be happy to share if necessary crude + screenshots (currently on a low bandwidth connection)

  Thank you

  Kevin

  Kevin, please try these:

  http://forums.Adobe.com/message/2681151

• Black spots on the screen

  Hello

  I noticed that my screen has several black spots or circles. Is this something known?

  Hello

  Contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty.

  https://www.Apple.com/support/watch/contact/

• I have black spots on the upper left corner on my Pro 100

  My printer started to leave a black stain on the upper left corner of anything beyond 5 x 7.  I changed the black cartridge, cleanied foam more run all maintenance tools.  Thank you

  I feel pretty stupid, but I thought about it. Somehow the paper box, I was working on the upper left corner of all leaves somehow got bent slightly upwards so when the document deleted from the bottom plate that the corner would come just enough print head dragged against the paper. Thanks a lot for your help.

• I'm getting the foreign language symbols and overlapping tabs at the top of my screen. Why?

  In the last two days, I started to get the foreign language characters randomly at the top of my screen, both the line of tabs and the address bar. At the same time, the tabs at the top overlap and are difficult to discern.
  Any ideas why and how to fix? Can send a screenshot of the problem, if it helps.

  The extension of McAfee SiteAdvisor has been reported to ask this question, so you can disable this extension for this control.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • How to uninstall SiteAdvisor:
    http://service.McAfee.com/faqdocument.aspx?ID=TS100162