UIX Visual editor for the development of the OAF?

Similar Questions

• Need a visual cue for the status of Plugins

  Need a visual cue for the status of Plugins:

  . . . "Ask to activate" - these are light gray - it's good

  . . . "Always enable" - should be in light green

  . . . 'Never turn on' - should be in red light - it currently goes to a slightly darker shade of grey

  Be able to sort them based on the State

  The above would make it easier to verify that they are the way you want

  There is only a ' true/false' = active tribute to work with, so you cannot always distinguish between activate and ask to activate.

  .addon-view[type="plugin"][active="false"]{box-shadow: inset 0pt 0pt 100px rgba(255,144,144,1.0)}

• INTEL FORTRAN COMPILE / VISUAL STUDIO FOR THE ASPEN SIMULATION

  Hi all

  I have little knowledge about the use of FORTRAN with application of this on VISUAL STUDIO. In fact, I know about these software because of the obligation for them to rewrite some code I had to rewrite before running on ASPEN Plus.

  My problem is, I want to run a simulation Aspen Plus using the soft articles in question, but I honestly don't know how to go for them, as all this seems confusing. I have already installed the compiler FORTRAN and Visual Studio, but I don't know which platform to extract the entry codes I need to compile.

  The codes that I needed to re - compile in Intel FORTRAN, which is compatible with the Aspen has been compiled previously using Silver frost 95.But FORTRAN, after compilation by using this software in Silver frost, codes does not work on Plus.It of Aspen was a few days ago I learned this can never work on ASPEN Plus Hence the need to install the compatible software.

  (1) what it means to re - write a written code previously in Silver frost FORTRAN 95 or other FORTRAN codes in Intel FORTRAN compiler code and what is the procedure for that?
  (2) after having rewritten in Intel FORTRAN codes codes using Intel FORTRAN compile, how I performs the following steps before finally launching the simulations using Aspen:
  b compile the user model?
  (b) models of the user shared a link in a Fortran Library procedure?
  (c) provide the files objects or shared for the Aspen Plus system libraries?

  Any positive contribution will be highly appreciated.
  Gee right.

  Hi, Ghislain law

  Your message is addressed in the discussions on these Microsoft Community forums. It is better suited for the MSDN Developer audience. Please click on the following link and post your question in the appropriate forum.

  MSDN forums: Index

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Concerning

• Starting today, BC., text editor for the blog module disappeared? What is going on?

  Blog of BC today module text editor disappeared? What is going on?

  Dainis

  I think that you have activated the new rendering engine of your site accordingly, that the editor is not displayed on the page of the Blog post.

  Go to Site Settings > Beta settings > uncheck the new engine for rendering, then check back blog post page, the editor should appear.

  http://prntscr.com/4x02wd

  Thank you

  Sanjit

• Using odiRef in the package ODI to get the user name for the object in step OdiSendmail

  Hello

  I'm trying to do something simple and to include the user name in a subject line of a stage of OdiSendMail.  In the Expression Editor for the topic, I use the following syntax, but in vain.

  Send data to HFM starts by < % = odiRef.getUser (String) % >

  What a friend missing here?  I need to replace the string with something like 'UserName' or is there a different setting to spend?  I tried the username, but it did not work.  This syntax is correct or do I have to enter another way?

  Thank you

  T.

  Hello

  getUser has a parameter which is the name of the property to recover, you will probably want the username;

  http://docs.Oracle.com/CD/E14571_01/integrate.1111/e12645/odiref_reference.htm#autoId70

  Something like...

  <%=odiRef.getUser( "USER_NAME" )%>

  See you soon

  David

• Help for writing an extension for SQL Developer

  Hi all
  I want to write an extension for SQL using JDeveloper and Oracle Extension SDK developer and I have a few questions.
  (1) is there some imports I need to sign up for the use of certain classes for SQL Developer?
  (2) how can I do a new item from the context menu in the area of connections in the left?
  (3) is there an example for this, because I have read a few posts of Sue and Kris Rice, but I figured out how to make the extensions only for JDeveloper.
  
  Thanks in advance!

  SQL Developer Connection browser uses a different site from the JDeveloper Application browser id. The site id OK to use for a listener from context menu is "db_nav". If your listener statement would look like this:

  
       
            My.listener.Class
       
  

  Note that a listener can be registered on several sites (if, for example, you wanted as your listener to trigger for publishers, you can use "db_nav; Editor"for the site id.

  You can post questions on the development of SQL Developer extensions on the developer forum SQL: SQL Developer this forum is monitored by the staff of SQL Developer.

  -John McGinnis
  SQL development team

  Published by: John Mcginnis, August 22, 2011 11:34

  Published by: John Mcginnis, August 22, 2011 11:36

• When in my wordpress dashboard, the Visual Editor does not work?

  Regularly when I'm in my wordpress dashboard, the Visual Editor does not work. Sometimes, not all the time. I tried the following:
  Disabled individual plug-ins
  Theme modified
  cache cleared
  uninstalled, then reinstalled Firefox
  'disable the Visual Editor' unchecked

  Thanks a lot for any help

  When this happens, you are totally unable to type/edit in the edit box, or are there limited functionality? The toolbar appear?

• Establishment of environment of Visual Studio 2015 for the creation of plugins for InDesign CS6

  Hello, I am currently developing plugins for Adobe InDesign CS6 and I am currently using Visual C++ in Visual Studio 2015 and I can't import Adobe environment in visual studio, because the available guide refers to Visual Studio 2010.  Should which directory I pay to go to what parts of the SDK?  Thank you very much.

  

  Hi Jacob,

  Some tips for you, VS 2015 is not recommended for dev environment. CS6 InDesign plugin. You will meet all kinds of issues if you use for creating plugins CS6 2015, are some of the issues you may face

  1. Compilation or linking errors
  2. Random crashes, while the plugin is running, if you manage to get that much.

  The main reason for this is the different versions of libraries CRT used by different versions of VS, which used once all causes all sorts of compatibility issues.

  I would recommend that you follow the recommended by Adobe in the SDK VS version.

  Now in regards to putting in place the project settings, you must configure the following paths mainly to point to different paths of the SDK

  1. Include paths for the C++ compiler, these are directories that contain different header files. This will contain multiple paths, see the sample project SDK for more details
  2. Path for libraries that need to be linked to your project, see Linker of a SDK project.
  3. Include the path to the resource compiler
  4. Apart from this, you can also set the executable directories, as shown in the screenshot you attached. This is used to designate certain executables that are used during the accumulation of the generation of the project phase.

  You could refer to the sample project SDK for details, I would recommend that you base your new project on a sample project of SDK software for beginners and once you are comfortable with the settings, you can go ahead and write your own project to project depending on how you like to your Setup project the configuration files. For more details on how to write configuration files for VS projects to do a google search on it.

  Hope that this info gets you started.

  -Manan

• Why a game developer would opt for the AIR over the packer?

  Developed Flash games for a while and considering trying some application markets.

  Most of my games is point and click girls games, they would lend themselves environments-Flash.

  AIR, Adobe offers what is called «Packager for Iphone» One of the advantages - from my point of view - which is seems to be compatible with IOS versions prior to the 3gs. What are the benefits of AIR conditioner in developing applications for the iphone?

  Packager for Iphone * IS * Adobe Air.  It's just the beta version of this CS5.5 offers for ios development.  Simply create your flash game and select iphone Packager as your editor instead of your standard air deployment.

  If you target air 2.6, you will not be able to deploy the iphone 3g or ipod 2nd generation and below.  Air 2.5 * will * be able to target these.

• website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, this i

  website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6

  This has happened

  Each time Firefox opened

  is after upgrade to 3.5?

  http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239

  You create a new profile and install only the extension Web Developer, as recommended Chris?

• Fingerprint memory for the LabVIEW 7.1 development system

  Hello

  I would like to know the size memory for LabVIEW 7.1 full development System.Both during the installtion and to develop applications later.

  If anyone can help. Thank you.

  There is no one answer for this, as this varies considerably.

  For what is on the disk, if my memory serves, the 7.x base takes a few hundred MB, but which could greatly inflate according to the modules and drivers you add.

  For the RAM, I believe than 7.0 used to identify approximately 20-50 MB immediately after loading, but this number then would also change a lot over time depending on what you are doing. Loading, editing and execution of code just regularly change the amount of RAM used.

  Why do you ask? Also, are you aware that 7.1 is relatively old now (came out 7 years ago)?

• A link to download the development for the LV 2009 64-bit software

  We have a license for the 32-bit version of the development and the app Builder. According to NOR gives us rights to the 2009 64-bit also. I can't find a download of the system Base 64 bits 2009 dev. I see F2 and F3 patch? I guess that there is a basic first installation, then the patches. Any help is appreciated

  Steve

  Looks like it should be: http://www.ni.com/download/labview-development-system-2009-sp1/3343/en/

• must my computer be connected to the internet for the development of work?

  must my computer be connected to the internet for the development of work?

  Hello

  Yes, because it updates your machine:

  Updates that help protect against performance problems future system by updating the PC with the Windows then in force, the BIOS firmware and software updates for security

  Source: http://www.hp.com/sbso/services/pc-tune-up-pro-datasheet.pdf

  Kind regards.

• Trying to register for a developer event SW in Finland. But the record window disappears before saying what happened.

  I am trying to register for a developer event in Finland using MS Live ID SW, but disappears from the record window before saying what happened.
  What should do? Contact person?
  The event is called 3 Amigos & Gal.
  Called MS Finland - person seems to know, they move me just for the next person. Who knows the support to developers?
  PS. It was the support person of the Finland MS who advised me to use this site.

  Hello

  If the problem is specific to Firefox, then I suggest you to send your request to:

  Firefox Support Forum

  http://support.Mozilla.org/en-us/questions

  You can also connect with Firefox for known problems.

  http://support.Mozilla.org/en-us/home

• Cannot install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173)

  I can't install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173).

  According to Microsoft Update, the error code is 0 x 643.

  I tried to install the update during a clean boot without result.

  Here is the log: https://skydrive.live.com/redir?resid=DDC6388AB2460543! 117

  Hello

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I would say you can do clean boot and install the update.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 3
  I suggest you to download and install the update from the Download Center.

  RTM of Microsoft Visual C++ 2010 redistributable MFC security update
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=21576

  Method 4
  I suggest you try the steps from the following link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.