Unable connect to the vdr 2 a client
I couldn't connect to the VDR to a customer of sphere 5 device? I was able to connect the client to the server vcenter client.
What could cause this problem?
I met the same problem; had a support case, and we arrived at the conclusion that there is something wonky with the SSL handshake. Fortunately, there is a switch in the option file which can be set to allow communication in clear text for VDR.
If you do not already have the config file, it's a bog standard Windows INI file, which is stored in the file system on the VDR unit: /var/vmware/datarecovery/datarecovery.ini
Here is what I added:
[Options]
ConnectionAcceptMode = 2
After setting the option and restart VDR service ("datarecovery restart the service" of the device command line), I was able to connect to the site of the a station that would not.
Tags: VMware
Similar Questions
-
After an attack of virus on the server, I am unable to connect to the server from any client computer.
I have a small net work in my house, and until yesterday, the network works well. MSSE clean virus win32 on my server attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. I used MS Fixit widjows firewall and then problem determination after the Client computer request user name & against which I entered the login data, password but it displays the same error message.
PL help someone who will be widely recognized.
Thank you best regards &.
Gandhi Prasad
Hello
Because the problem is with the server, I recommend you post this question in the TechNet forum.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
-
How to connect to the server ESXI vSphere Client side WAN?
How to connect to the server ESXI vSphere Client side WAN?
through firewall
I tried to open the ports 902 903, 443... and so on...
and I tried several sites to find the solution but...
nothing works...
connectivity works on local network
Help, please...
Source Destination Port
ESXI 443/TCP client
ESXi 902/TCP client
ESXi 902/TCP Client
ESXi 902/UDP Client
ESXi 903/TCP client
Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:
Example:
See attachment...
-
After a virus attack, I am unable to connect to the server from any client computer.
I have a small net work in my house, and until yesterday, the network works well. MSSE has cleaned up win32 virus attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. Infographic customer request user LRN & passwiord against which I entered the data from the server connection, but it displays the sdame error message. PL help someone who will be widely recognized.
Thank you best regards &.
Gandhi Prasad
original title: connection from the Client to the network problem
Hello
Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public Server on TechNet. Please post your question in the Windows Server Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Unable to connect to the ASA vpn Android client
secHello, I have problem with android client. So I've solved many problems and finally could get the PHASE 1 and PHASE 1 COMPLETED messages in newspapers :). In any case, I have a problem different, even if the client of the phase 1 and 2 completed failed to connect again. Here are the logs:
| 21456 | *** | 500 | Built of UDP connection entrants for outdoor 600577524: * / 21456 (* / 21456) identity: * / 500 (* / 500)
| 27262 | *** | 4500 | Built of UDP connection entrants for outdoor 600577567: * / 27262 (* / 27262) identity: * / 4500 (* / 4500)
Group = ANDROID_PROF, IP = *, automatic NAT detection status: remote endpoint IS behind a NAT device this end is behind a NAT device
Group = ANDROID_PROF, IP = *, floating NAT - T of * port 21456 to * port 27262
Group = ANDROID_PROF, IP = *, PHASE 1 COMPLETED
Group = ANDROID_PROF, IP = *, IPSec initiator of the substitution of regeneration of the key time of 0 to 4608000 Kbs
IPSEC: Remote access out HIS (SPI = 0x0429CEA7) between * and * (user = ANDROID_PROF) was created.
Group = ANDROID_PROF, IP = *, the security negotiation is complete for user (Responder), Inbound SPI = 0xc95803fc outbound SPI = 0x0429cea7
IPSEC: Incoming remote access between HIS (SPI = 0xC95803FC) * and * (user = ANDROID_PROF) was created.
Group = ANDROID_PROF, IP = *, PHASE 2 COMPLETED (msgid = 9aab13ed)
| 27262 | *** | 1701 | Built of UDP connection entrants for outdoor 600577657: * / 27262 (* / 27262) identity: * / 1701 (* / 1701)
L2TP tunnel created, tunnel_id 24, remote_peer_ip is *, 1/ppp_virtual_interface_id, client_dynamic_ip is 0.0.0.0, user name is *.
Tunnel L2TP deleted, tunnel_id = 24, remote_peer_ip = *.
IPSEC: Remote access out HIS (SPI = 0x0429CEA7) between * and * (user = ANDROID_PROF) has been removed.
IPSEC: Incoming remote access between HIS (SPI = 0xC95803FC) * and * (user = ANDROID_PROF) has been removed.
Group = ANDROID_PROF, IP = *, Session is to be demolished. Reason: The user has requested
Group = ANDROID_PROF, user name =, IP = *, disconnected Session. Session type: IPsecOverNatT, duration: 0 h: 00 m: 07 s, xmt bytes: 1021, RRs bytes: 955, reason: the user has requestedAs you can see session was demolished immediately, said Android failure. The Android settings:
Name: ANDROID_PROFType: L2TP/IPsec Psk
The IPsec identifier: ANDROID_PROF
Pre-shared key IPsec: cisco
The ASA config:
attributes global-tunnel-group ANDROID_PROF
address IPSEC_RA_POOL pool
Group-LDAP LOCAL authentication server
LDAP authorization-server-group
NOACCESS by default-group-policy
IPSec-attributes tunnel-group ANDROID_PROF
IKEv1 pre-shared-key *.
tunnel-group ANDROID_PROF ppp-attributes
CHAP Authentication
ms-chap-v2 authenticationANDROID_PROF_GP group policy attributes
value of DNS server *.
VPN - 4 concurrent connections
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list ANDROID_PROF_USERS
Cisco.local value by default-field
the address value IPSEC_RA_POOL poolsHello
Your problem is with Android L2TP/IPsec client that connects to the AAS has been caused by: CSCug60492 (Android phone disconnected from l2tpoveripsec and reconnect asa hung)
It is Android actually issue, not a bug of the SAA. This resolution is based on Android.
I hope this helps.
Thank you
Vishnu
-
Unable connect to the CC &; B
Hello world
I am new to CC & B spent the installed without any problems during the installation of the frame V2.2.0 I specified:
== > application admin user = usertest1
== > application admin user password = usertest100
My problem is that I can't connect to cc & b using usertest1/usertest100 cc & b shows unable to open a session.
When I add < username = 'SYSUSER"password ="sysuser003"roles ="cisusers, administrator, Manager"/ > to my C:\SPL\envtest1\product\tomcatBase\conf\tomcat-users.xml
It works, I am able to connect using only SYSUSER/sysuser003 but not not using the user that I created while I was installing the framework and the cc & b.
It's my environ.ini:
THIS IS AN UPDATED FILE SYSTEM!
# DO NOT MANUALLY EDIT
MPLSTART = N
NLS_LANG = AMERICAN_AMERICA. UTF8
SPLENCPASS = 215452445153445253100F0F21
JVMchild_OPTIONS =-Xmx512m-Server - Dfile.encoding is ISO8859_1 - cp C:\SPL\envtest1\splapp\standalone\config;. C:\SPL\envtest1\splapp\standalone\lib\activation_api-1.1.jar; C:\SPL\envtest1\splapp\standalone\lib\commons-BeanUtils-core-1.7.0.jar; C:\SPL\envtest1\splapp\standalone\lib\commons-CLI-1.1.jar; C:\SPL\envtest1\splapp\standalone\lib\commons-codec-1.3.jar; C:\SPL\envtest1\splapp\standalone\lib\commons-collections-2.1.1.jar; C:\SPL\envtest1\splapp\standalone\lib\commons-FileUpload-1.2.jar; C:\SPL\envtest1\splapp\standalone\lib\commons-HttpClient-2.0.2.jar; C:\SPL\envtest1\splapp\standalone\lib\commons-IO-1.3.2.jar; C:\SPL\envtest1\splapp\standalone\lib\commons-lang-2.2.jar; C:\SPL\envtest1\splapp\standalone\lib\commons-logging-1.0.4.jar; C:\SPL\envtest1\splapp\standalone\lib\concurrent-1.3.4.jar; C:\SPL\envtest1\splapp\standalone\lib\dom4j-1.6.1.jar; C:\SPL\envtest1\splapp\standalone\lib\hibernate-3.2.5.GA.jar; C:\SPL\envtest1\splapp\standalone\lib\icu4j-3.6.1.jar; C:\SPL\envtest1\splapp\standalone\lib\jaxen-1.1.1.jar; C:\SPL\envtest1\splapp\standalone\lib\jcip-annotations.jar; C:\SPL\envtest1\splapp\standalone\lib\jta.jar; C:\SPL\envtest1\splapp\standalone\lib\jtds-1.2.jar; C:\SPL\envtest1\splapp\standalone\lib\log4j-1.2.15.jar; C:\SPL\envtest1\splapp\standalone\lib\mail_api-1.4.jar; C:\SPL\envtest1\splapp\standalone\lib\mfcobol.jar; C:\SPL\envtest1\splapp\standalone\lib\ojdbc5-11.1.0.7.0.jar; C:\SPL\envtest1\splapp\standalone\lib\orai18n-collation.jar; C:\SPL\envtest1\splapp\standalone\lib\orai18n-mapping.jar; C:\SPL\envtest1\splapp\standalone\lib\orai18n-utility.jar; C:\SPL\envtest1\splapp\standalone\lib\orai18n.jar; C:\SPL\envtest1\splapp\standalone\lib\serializer-2.7.0.jar; C:\SPL\envtest1\splapp\standalone\lib\spl-base-2.2.0.jar; C:\SPL\envtest1\splapp\standalone\lib\spl-CCB-2.3.0.jar; C:\SPL\envtest1\splapp\standalone\lib\spl-servicebeaninterface-2.2.0.jar; C:\SPL\envtest1\splapp\standalone\lib\spl-ServiceClient-2.2.0.jar; C:\SPL\envtest1\splapp\standalone\lib\spl-shared-2.2.0.jar; C:\SPL\envtest1\splapp\standalone\lib\spl-SPML-2.2.0.jar; C:\SPL\envtest1\splapp\standalone\lib\spl-Web-2.2.0.jar; C:\SPL\envtest1\splapp\standalone\lib\spl-Xai-2.2.0.jar; C:\SPL\envtest1\splapp\standalone\lib\stax-API-1.0.1.jar; C:\SPL\envtest1\splapp\standalone\lib\stax2.jar; C:\SPL\envtest1\splapp\standalone\lib\staxmate-0.9.1.jar; C:\SPL\envtest1\splapp\standalone\lib\wstx-ASL-3.2.1.jar; C:\SPL\envtest1\splapp\standalone\lib\xalan-2.7.0.jar; C:\SPL\envtest1\splapp\standalone\lib\xmlparserv2.jar; C:\SPL\envtest1\splapp\standalone\lib\xquery.jar; C:\SPL\envtest1\splapp\standalone\lib\xstream-1.2.1.jar; C:\SPL\envtest1\splapp\standalone\lib\yjp-controller-API-Redist.jar
WEB_SPLUSER = usertest1
SPLEBASE = C:\SPL\envtest1
XAIApp = XAIApp
SPLDB = oracle
SPLENVIRON = envtest1
WEB_maxAge = 28800
WEB_WLPORT = 6500
WEBENCPASS = 21524F4B40434C484D21
WEB_SPLPASS = usertest100
ENCODING = true
DBPASS = ENC (gcG8M + UVKxwedHZ6ftn2YD0OPkT6l + z0r11c + jsQh7M =)
DIRSEP =.
SPLADMIN = administrator
WEB_isDevelopment = true
DIALECT = org. Hibernate.Dialect.Oracle10gDialect
REL_CBL_THREAD_MEM = false
CMPDB = oracle
ORACLE_SID = ccbdemo
appViewer = appViewer
DESC = 1 test environment
WEB_TCATSHUTPORT = 6501
WLSSPL = Y
SPLWEBAPP = SPLWeb
MPLADMINPORT = 6502
high value = \uF8FF
SPLWAS = TCAT
WEB_isExpanded = true
SPLApp = root
SPLADMINGROUP = cisgrp
SPLOUTPUT = C:\SPL\sploutput\envtest1
RJVM = true
BSN_WLHOST = ITNVAFRICA
JavaEncoding = UTF8
WEB_maxAgeI = 28800
XAISTARTWAITTIME = 90
DOC1SCRIPT = _ccbPrintDoc.cmd
SPLSERVICEAPP = SPLService
BSNENCPASS = 21524F4B40434C484D21
BSN_JVMCOUNT = 2
DB2MPLuse =
DBENCPASS = 214C445148444C21
modules = Basic, CCB, cm
WEB_WLHOST = ITNVAFRICA
BATCHTHREADS = 5
SPLVERSION_NUM = 2.2.0
WEB_preloadall = false
DBNAME = ccbdemo
DOC1BILLSCRIPT = _ccbPrint.cmd
WEB_WLAUTHMETHOD = FORM
BATCHENABLED = true
help = help
DBUSER = cisadm
SPLVERSION = V2.2.0
BSN_RMIPORT = 6503
BATCHDAEMON = true
DBDRIVER = Oracle.JDBC.Driver.OracleDriver
DBPORT = 1521
JVMMEMORYARG = 512
DBCONNECTION=JDBC:Oracle:thin:@ITNVAFRICA:1521:ccbdemo
DBSERVER = ITNVAFRICA
WEB_isAppViewer = true
jvmcommand=C:/SPL/Java/bin/Java.exe
It's my C:\SPL\envtest1\product\tomcatBase\conf\tomcat-users.xml
<? XML version = "1.0" encoding = "utf - 8"? >
< tomcat-users >
< role rolename = 'Manager' / >
< role rolename = 'tomcat' / >
< role rolename = "admin" / >
< role rolename = "wamusers" / >
< role rolename = "mwmusers" / >
< role rolename = "role1" / >
< role rolename = "cisusers" / >
< role rolename = "bausers" / >
< role rolename = "nmsusers" / >
< username = "both" password = "tomcat" roles = "tomcat, role1" / >
< username = "tomcat" password = "tomcat" roles = "tomcat" / >
< username = 'SYSUSER"password ="sysuser003"roles ="cisusers, administrator, Manager"/ >
< username = "role1" password = "tomcat" roles = "role1" / >
< username = password "SYSUSER12" = "sysuser12" roles = "cisusers, administrator, Manager" / >
< username = password "usertest1" = "usertest100" roles = "cisusers, administrator, Manager" / >
< username = password "SPLSLK" = "SPLSLK12" roles = "cisusers, administrator, Manager" / >
< / tomcat-users >
My question is: can connect to CC & B using a different username than SYSUSER? If Yes, please what Miss me and what I need to do?
Any help could be appreciated,
Thank youThe answer is YES, it is possible to connect using one different user than SYSUSER CC & B. The tomcat - users.xml file configuration of the Web server to tomcat user, but you must create the user of the Application as well. The reason why you are able to connect to the CC & B using the SYSUSER user just after installation, this is because the user is already registered in the application itself, in other words, is to live in the CC & B database.
What you need to do, is to connect using SYSUSER and go to the Admin Menu > U > user, search for the SYSUSER and duplitace it. You can specify your user name here and special security (enforcement), but the password must be configured in the file users.xml - tomcat. Make sure you just him match Username the user name that you put in the file users.xml - tomcat.
I hope it helps.
-
"Direct connection to the desktop" and external clients
Hi all
I'm doing a View 4 u1 installation with a connection to the server and a security server. I just want to confirm with the setting to view administrator, check box "direct connection on the desktop.
I find that if I check it, then external clients of internet do not work - can see the office pools, but at launch, the customer will see appear in the taskbar, disappear. When I uncheck, all external clients work very well.
my understanding is that this check box determines whether RDP traffic will be dug by the connection to the server or it will go straigh from the clients to view offices. I though that this setting affects only internal clients. I don't see how it affects external clients that connect through the Security server.
When you look at 'netstat' of external clients, trying to run the office, I can see the threshold to appear when the customer view disappears, it will also disappear. Looks like when the box is check (direct connection), the client view external attempts to establish the RDP directly on desktop computers, apparently, it won't work. So, how can a direct connection for internal clients only?
TCP 192.168.20.2:56473 winxp - 04:ms - wbt-Server SYN_SENT
any ideas?
Thank you
Ming
In our environment, we have our external users (Security Server) use a broker who has direct connect disabled while internal users use a different set of brokers that are defined to use direct connect.
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
-
Unable connect to the App Store on my iPhone 6 Plus. Can connect you to iTunes.
Connected successfully to manage apple ID of my MacBook Air running OS El Capitan 10.11.3
Connected successfully to manage apple ID of my Air 2 IOS 9.2 iPad
On my iPhone 6 more IOS 9.2.1:
-Can NOT connect (do not take my password) on App Store
-CAN connect using the Apple ID and password even successfully using the settings > iTunes & App Stores, by clicking on my Apple ID, then view Apple ID, then manage, then from the web page to manage Apple ID enter identifier Apple, then the same password I tried to connect to the App Store.
I can't understand how to fix it - when I have successfully a connection on my iPhone to manage devices - it shows that I am connected to both my Plus 6 iPhone and my iPad 2 Air
Try to connect to the App Store first, and then try to connect to.
-
Unable connect to the iMessage - and no error message
iMess on my computer stopped working the other day. Similar stuff has been examined in other threads, but my problem is a little different, since I get no error message. iMess wants connect me, and when I enter my details, nothing happens: I support on connect, then the system seems to think for a second, and then he wants me to support again connect as I never have. It does not say that my password is wrong or anything, separates me from other threads.
I not made any changes to my system. I can use on my phone without problem iMess.
I thought that perhaps Little Snitch had something to do with it (even though I made no change to the it for a long time). So I temporarily stopped, but no luck. It reveals the process of akd comes into contact with gsa.apple.com, so at least my part of this communication seems OK.
-
Unable connect to the webgui LGS308 crashes at 90% on the treatment of the data
Hello
I have a LGS308 but I can not connect to the webgui interface more.
The user name and password are correct, but there is a dialog box with the title "Data processing" and a progress bar.
This goes up to 90 percent and crashes there.
Already removed the power and put the power back in, but no result.
Always the same, also tried other browsers, always the same result. (or hangs at 80%).
Is this a known issue? and is there a solution for this?
I really need to reconfigure the switch.
Had the same problem, thanks for the tip on the expiry of telnet/password. Worked fine for me also.
Looks like you can set the password, time-to-live in telnet "cisco" config mode.
Telnet to the switch
Opening of session
Press Ctrl-A
Type "lcli" to the ">" prompt
Connection again...
Type "conf t".
Type "aging 0 passwords"
Press Ctrl + Z
Type "wr" to save.
Fact!
-
CF10 new installation unable connect to the console of the server administrator
I just installed CF10 on a Windows 2008 R2 server. The last step in the installation process is to connect to the administrator of CF. When I try this in the browser on the server, my password is denied. It works fine if I use the browser on my workstation. How can I get the browser on the server to accept my password?
Hello Brian,.
You can try the following http://localhost: [pot number]/CFIDE/administrator/index.cfm ]
There is a bug with the Windows Server 2008 with the default browser. Please visit http://forums.adobe.com/message/5259763#5259763 for more information.
Kind regards
Anit Kumar
-
Unable connect to the iMessage and FaceTime
My mac doesn't let me connect.
I tried:
- Update
- Restart
- Deactivation / activation iCloud
- Reset my Mac.
But he always keep stand like this for:
Someone knows what to do?
I run on a MacBook Air 11 '' of 2015 on OS X El Capitan
Well Yes, having the same problem here!
-
Unable connect to the sequence editor of
Hello
I seem to have something broken in my version of TestStand 4.2. When I run the sequence Editor starts in the logged out State. When I click on Login... nothing happens.
I think this may have something to do with process templates - I had installed a updated the SequenceModel.seq which has been altered by a co-developer and re-installed the original on it back because the updated process template wanted to access the components that I don't have on my computer (which is a sql database). Anyway, since I did it, I can't have the logon dialog box to display.
TIA
Ron
It is the reminder of the frontend, not the process model, which is responsible for implementing the connection/disconnection process.
There should be two versions of the FrontEndCallbacks.seq file on your computer as follows:
(1) in
\TestStand 2010\Components\Callbacks\FrontEnd, this version here must have a sequence called LoginLogout (2) in
\Components\Callbacks\FrontEnd, this version must be an empty sequence file. In addition, make sure that you do not have the station defined option to automatically open a session to the user of Windows System.
Hope this helps,
-Doug
-
Web page unable connect to the ACS server
Hi I install DCC 5. -in vmware workstation. SecureCRT can connect to ACS and can see the running-config SSH. But I can not connect to its web page. When I entered the username and password(acsadmin/password), I got the error message "invalid user name" or password specified. Even if I set up a new virtual machine of ACS, I always have the same question. Can someone give some suggestions? Thank you
No, you must set via GUI only. CLI can be used to create the cli administrator accounts. User name for GUI and CLI are different.
Kind regards
~ JG
Note the useful messages
-
My profile on my old laptop has become corrupted and I can't log in with my regular account (admin). I would like to add and merge bookmarks former firefox to another laptop, which already has existing bookmarks. I can not simply copy and paste the profile folder as this would crush my existing bookmarks and settings. Unfortunately, I have not set up the sync on this browser feature.
Unfortunately, Firefox doesn't have good tools to merge and dédupliquant bookmarks. I will propose a roundabout way to do. Here's an overview:
(1) create a new profile Virgin (#3) in your current Firefox (see details at the end)
(2) while using the #3 profile, restore a file in JSON format to backup your old (#1 profile) system (see restore bookmarks from a backup or move them to another computer)
(3) export bookmarks restored to an HTML element in a perfect location, with a file name unique format (see Export Firefox bookmarks to an HTML file for backup or transfer bookmarks)
(4) exit Firefox and is reactivated in your normal profile (profile #2)
(5) file bookmarks import as HTML (see import bookmarks in HTML file)
(6) create a backup in case something is not going to step 7 (see restore bookmarks from a backup or move them to another computer)
(7) rearrange bookmarks in the folder of imported bookmarks (see https://support.mozilla.org/kb/use-bookmarks-to-save-and-organize-w...), possibly using an add-on deduplicating
Create a new Firefox profile
A new profile will be your plugins installed by system (for example, Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions or other customizations. It should also have databases of completely fresh settings and cool a cache folder.
Out of Firefox and start in the profile using Start Manager > Search box (or run):
firefox.exe -P
Do not delete anything here. Any time want to switch profiles, exit Firefox and return to this dialog box.
Click on the button to create a profile, give it a name like OldBookmarks and skip the option to change the folder. Then launch Firefox in the new profile that you have created.
You are ready to return to the new profile and create export to HTML format.
When you return to the Profile Manager, you might be tempted to use the button to delete the profile. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.
Maybe you are looking for
-
My windows media player will not play a DVD
My windows media player will not play a DVD: Microsoft Windows 95 Version 5.1 (Build 2600.XP_SP3_gdr.111025 - 1629:Service Pack 3). Download a free version of media player to play the DVD? Please tell me the name of the upgrade and where to find th
-
I received last week T420 but have not been charged so far
I don't feel uneasy to get a free laptop from Lenovo. I wonder what Lenovo would charge me? I bought via Amazon Payments. I missed a call this week and I thought it would be a call from the credit card service after googling the number. It could be a
-
HP photosmart more b209a-m DRIVERS for WINDOWS 10 NEWS
I need to get the drivers for my printer that works in Windows 10. Got the new update, now my printer is not working.
-
Card drivers Dell 1397 WLAN for Windows 8
Like a fool, I downloaded Windows 8 the first day of its publication. I have a laptop Inspiron 1545. As soon as I installed W8, my wireless card has stopped working. Are there opportunities that W8 drivers will be released anytime soon? I am very dep
-
I have a new problem. My laptop is more than a year and no problem connecting to the Internet. I changed my security software and now am connected to Internet but can't access the web pages or e-mail. I tried a lot of solutions suggested here. I