Unable to access files that are engraved on DVD as Live file system

Similar Questions

• VPN clients are unable to access sites that are above a link from site to site

  could someone please give me some direction, I have a set of vpn clients set up on a pix and I'm trying to give them access to a network that is connected via a link from a site that is set up on the same pix. so, basically, that it receives information from VPN client on the same interface, it built the tunnel from site to site, I've heard that's not possible is that the case. Or it can be fixed, I can provide diagrams and if necessary conf files.

  You are right. You need a minimum of 7.0 for the feature you're looking for.

  Kind regards

  Arul

  * Please note all useful messages *.

• I'm unable to open links that are sent by e-mail to me.

  original title: Emailing issues

  I'm unable to open sites that are sent to me.  Cannot highlight.

  Go to control panel | Default programs | Associate a file type or Protocol with a program.  Then the page down to protocols, and the default value of IE for the HTTP and HTTPS protocols.

  Steve

• Disks of the virtual machine consolidation is necessary is Unable to Access file < file_name indeterminate > because it is locked

  Hola a tod@s,

  After using the application of only backup '5.5 virtual Data Protection' y no las snapshot los correctamente foot VM´s, me appears a message en the pestana "Summary" indicating:

  Consolidation of disks of virtual machines is necessary

  Bueno... mirando the documentation oficial, are several soluciones, the first are pulsar en option "SnapShot-> Consolidate" pero muestra el error:

  Unable to access file < unspecified file name > because it is locked

  What is seria el siguiente paso?

  -ESXi version 5.1

  -En VM´s production...

  Gracias por todo.

  Saludos.

  Please if you ha sido util the respuesta correcta como marca respond.

  Gracias!

• A45-S250: unable to load everything that was engraved on a dvd disc

  Hello.

  recently I had problems trying to load everything that was engraved on a dvd disc.
  Before that I would be able to burn avi files and watch them at a later date, but now nothing is coming.
  When I insert a disk and then click Properties, it says that the disk is full, but 0 bytes have been used.

  I bought the computer in America nearly 2 years ago before moving to England. When I bought the computer, he wouldn't burn DVDs at all, and I got the replaced disk.

  There are currently a pioneer dvd - rw dvr-k12D in my machine. When I bring the properties, it says everything is working properly.

  any help would be greatly appreciated.

  Thank you very much!

  Beth.

  Hi Beth

  Unfortunately, it is not easy to say what may be the problem.
  Y at - it the same problem with different DVD or even original movies on DVD?

  The reader can recognize correctly but that doesn t mean that the lens is working properly.

• Table of DB tools list: how to access tables that are in the different SQL database?

  Hi all

  I work on an implementation of database (SQL server) and evaluates the Toolkit OR DB for this project.

  One of the requirements is that I need access to the tables that are in two different database

  (say Table to 1 DB and Table B to 2 DB).

  Our IT guy linked table in DB1 to DB 2 and I verfied this when I use the SQL server management studio.

  When DB 2 tables is filled, table from DB1 is also there. I can also do the same thing using MS Access.

  Table A of the DB1 is available for me enven if I only connect to 2 DB.

  Here comes the problem.

  When I use DB tool list Table.vi to access DB2, it does NOT list A table in DB1. It list only the tables in

  the database (DB2) which I am connection (using DB tool opened Connection.vi with a file DSN)

  So my work around right now is to open a separate connection both DB1 and DB2. However, this approach

  obviously creates a problem when I have to access a separate database constantly in my application.

  What would be a solution to this? I have search the Forum but only to see a post that is somewhat related to

  My question. (And it was published the 2004) Maybe I need to change the code in the orignial VI (DB tool list Table.vi)?

  My computer guy told me that he has not met this scenario since he wrote code in another environment such as

  VB and others and it has always been successful in linking the different database tables.

  I hope my question is clear and healthy because I don't really know much about database terminology.

  Any comment or suggestion is appreciated!

  Thank you

  Chad

  Ok.  Here is some information that I can work with.  Good.

  Your COMPUTER staff created a view called "VISUAL_WORK_ORDER".

  A view isn't a table.  It is a "virtual" table  Views are used to collect data (usually) in several different tables.

  But I guess that the code inside the DB tool list Table.vi returns a list of tables.  Views are not the tables.  Then "VISUAL_WORK_ORDER" does not appear in the list.

  HOWEVER, this should not really matter.  The view is here!  And it can be queried like any table.  So, you can use DB tools Select Data.VI... and wire in "VISUAL_WORK_ORDER" as the name of the table.  This will return the contents of the view.  Alto!

• Unable to access file and folders on the computer after you connect to a home network. Get isn't permissions error message.

  Original title: unlock files locked in the residential-change group of security settings does not (always says that I don't have permission even if I am Admin)

  I have a Windows 7 operating system. I am new to congregate.  I recently noticed that I was connected to a House Group 'network' and so I 'locked' cases to the case where I me be hacked (that I don't use other computers and thought it was strange).  Unfortunately, now that I want to access these files, it says I don't have permission and when I sometimes IN a folder, by allowing permissions administrator in the Security tab, I'm still stuck to see the documents by an error saying that I don't have permission.  I was rid of the congregate at a given moment, then 'active' it again with the idea that I should probably be in home group to make changes to the way they were.  I know that I blew it, but I don't know how to fix it!  Please help me to unlock these files!  I normally log - on as an administrator (no one else assigned to the computer), so I don't understand why I can't make changes to the permissions.

  Hello

  (1) where the files are stored on the computer?

  (2) would you move the music file to a different location/drive and check if the problem persists?

  (3) what is you get the exact error message?

  Method 1: 'Windows cannot access the specified device, path or file"error when you try to install, update or launch a program or file

  http://support.Microsoft.com/kb/2669244

  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished. Use this workaround at your own risk. To temporarily disable your antivirus software, see disable antivirus software

  Method 2: Virus scanner

  You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.

  See the link to download Microsoft Safety scanner on the system.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Hope the helps of information.

• Unable to access file encypted

  Original title: Encrypting files

  while back, I have encrypted some folders and files. now I can't cancel it... I'm told the web site of windows but apparently she claims that I'm not the original user. I am the only user, well I had to reinstall windows and all software a few months back because of a blackout. any way around this? I don't know the DDT... just can't do ask.

  The file system of encryption (EFS) encrypts files on a key.  The key is held as a certificate in the operating system.  The certificate is, in turn, encrypted to your secure ID (SID) and your password.

  When you have had your system crash, you have lost your certificate and your Secure Code.  Without those or a backup of your certificate you have made before the accident, you have lost access to your files.  EFS has earned the nickname of 'Trash delay' for this reason. In accordance with the recommendations of Samhrutha G, read:

  "Best practices for encrypting file system ."

  Special attention to the paragraph towards the end labeled "why you should back up your certificates.

  Sorry,

  JW

• VMotion displays "unable to access file" when you try to migrate a VM running using shared LUN

  3 nodes running on ESX 3.5 vmotion shows 'cannot access file'... vmdk when you attempt to migrate from ESX1 to ESX3 on a running virtual machine. Both ESX servers share a common LUN. I'm going through storage LUNS on ESX2 ESX1 local storage. I am able to do so if the virtual machine is turned off, but I get the error when the virtual machine is running.

  You can't do a vmotion off local shared storage.  You will have to stop the virtual machine and do a cold migration, or you can do it live with sVMotion

  http://sourceforge.NET/projects/VIP-SVMotion/

  How to:

  http://www.virtualizationadmin.com/articles-tutorials/VMware-ESX-articles/VMotion-DRS-high-availability/storage-VMotion-SVMotion-VI-plugin.html

• Can't access file system host (MAC) shared in VMware vCenter Converter Standalone Client when wanting to create a VMware image (Windows 7 in Parallels virtual machine running on a MAC) for the option of machine Powered On.

  File HOST (Mac) system is currently shared in the Parallels virtual machine and is accessible through Windows Explorer and works correctly in the Virtual Machine environment, however, after installing vCenter Converter application on the Windows virtual machine these shared folders are not accessible from the conversion tool in the selection of the target destination of the file VMware (s). I can't select an existing folder on drive "C:" to write the image so that there is not enough space available for the VMware image and it must be written in a different file system, while the image is being created.

  Anyone know a way around it to show the target to write the image on the host (MAC OS) file system or is it a bug?

  Thanks for the reply.  It seems that the maps are not displayed if they were created as actions by the hosts.  When I created a mapping directly from Windows, then this mapping appeared and the conversion worked fine.

• Unable to access files in the public folders of other accounts.

  I have two accounts on my windows machine 7 and when I load a file in the public folder of one the other cannot access the file.  I have to grant permissions to the other user for each file individually.  Incedentally both accounts are Admins.   Any ideas?

  As a general rule, if you move a file from one folder to another, the file protections are maintained as they were before the move - so if UserX doesn't have permissions to a file in one of your folders, move them to a folder Public will not give permission.  However, if you copy a file to a folder to another one, then the copied file/folder will take on the permissions of the folder newly containing.

  Bottom line... try dragging the file in the Public folder with your mouse right button when you release, select "Copy" from the context menu.

  HTH,
  JW

• Adding NFS - error: unable to mount file system

  Hello

  When you try to add my NFS in VSphere (version 1), I get the following error at the end:

  *Error when configuring the host: NFS error: unable to mount filesystem: unable to connect to the NFS server*.

  To add the NFS, I did the following:

  1 created VMKernel (entered a static IP, subnet mask, default gateway address, enabled checkbox Vmotion) on the same vSwitch as Service Console

  2. click on add storage - NFS

  3. Enter the IP address of the server, a folder, I created on the NFS (/ etc/vmware) and gives him a name of random data store (TESTNFS).

  4. click on finish

  Next, I get the above error.

  Any ideas?

  N ° IP address must be the one you use for the vmkernel NFS on the ESX Server. The syntax of the file "/ etc/exports ' is:

  = Send 'Assignment' to 911 for only $999999,99! =

• Access to the local file System on JCS-SaaS

  Hello

  I am trying to access the local file system of my JCS-SaaS cloud with two options below. But it doesn't work anyway. Can you please give me some ideas to move my local file to domain JCS.

  Doc reference: http://docs.Oracle.com/cloud/latest/javacs_gs/CSJSU/GUID-1452AA1C-5B32-4c68-845E-A7802344A523.htm#CSJSU7273

  (1) using the file browser

  I have deployed the sample project given with SaaS - Cloud Java SDK extension. I am able to see the page but could not do anything on this page.

  Please see the attachment for the same thing. Nothing works on this page. He works for one of you?

  (2) using the file system Shell access: I am getting following error. Can you please.

  > java-jar %SDK_HOME%/lib/javacloud.jar - a http://SFTP.US2.cloud.Oracle.com:20 u [email protected] -id inaccenturetrial00450-TR javatrial2180 - fs Java shell access file system service

  [TIP] - check your network connections. If you are behind a proxy http (s), try using

  the option - httpproxy

  [TIP] - the service is perhaps out of service. We can also host name or the name of the port

  an error in the url http://SFTP.US2.cloud.Oracle.com:20

  [ERROR] - java.net.ConnectException: Connection timed out: connect

  Thanks in advance

  Samy

  I know that there was a problem at least on an older instance for the shell, however in the latest versions is should be fixed. Have you tried with the proxy as parameter suggests the error message? Also "-d" flag provide you additional details of debugging. Then try something like:

  java-jar javacloud.jar - user username - fs - id oracletrialXXXX-TR javatrialXXXX - dc US2 - hp host: port d

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• Problem of deletion of snapshot - not access file &lt; unspecified file name &gt; because it is locked.

  Guys,

  I'm having a problem to remove a snapshot of console vSphere. I am running with vSphere v5.1.

  I tried to recreate the snapshot and perform the complete withdrawal and its looks the same. I also restarted the Management Agents on ESXi host where the virtual machine was stationed. But the problem remains the same. All thought and helpful is perhaps help to solve this problem for me?

  My backup keep fault because the snapshot may not remove the host.

  Delete all snapshots

  *********

  Unable to access file < unspecified file name > because it is locked

  ********

  *********************

  08:41:04 07/07/2014

  08:41:04 07/07/2014

  07/07/2014 08:41:16

  VMware KB: Restarting management on an ESX or ESXi host agents

  The light of the foregoing, it is the impact:

  Attention: restart management agents may have an impact all the tasks that can run on the ESX ESXi host at the time of the recovery.

• Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.

  2. they will not be usable until the restoration.

  (140480)