I'm unable to open links that are sent by e-mail to me.

Similar Questions

• C309a printer does not print bar codes that are sent by e-mail

  I can't get my printer to print bar codes that are sent by e-mail. The printer leave this part of the page in white. A gift card was sent by e-mail to me. All the writing on the printed page, but the image of the card was left blank when I printed. Print preview has revealed everything, but when I printed, he left this part of the blank page. Someone knows why this happens?

  Hi @phillipsortino,

  Welcome to the Forums of HP Support! I see you are having problems printing of barcodes from an e-mail. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  You can save the file in PDF format and print the document as an image of Adobe.

  From the advanced printer settings, check print as Image.

  

  You may install the barcode fonts. Here is the link for the Free Barcode Font - Code 39

  If there is anything else I can help you, let me know. Thank you.

• Cannot open links that are supposed to appear in another page.

  Whenever I left click to open a link that is designed to open in another window, as a PDF file or a few sites Web which are supposed to the top of the page open in another window, the site opens very briefly with the words subject: empty, then it closes immediately.

  How can I fix it?

  Thank you!

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• 29.0.1 Firefox won't open links that require a new tab to be opened.

  29.0.1 Firefox won't open links that require a new tab to be opened.

  What type of links are those?

  As far as I KNOW, there is HTML code specific opening in a new tab, as it is to open a new window. Please enlighten me if this is something new to HTML5 that I haven't read.

  Now, Firefox has a preference in Options > tabs to open new windows in a new tab instead - you have this pref checked?

• Cannot open DOC files that are sent to me. I have wordpad and Notepad on my computer but you do not have Microsoft Office

  original title: DOC files

  Cannot open DOC files that are sent to me. I have wordpad and Notepad on my computer but you do not have Microsoft Office. Most of the time, I get a screen that says 'open' or 'save' the file and when I click on 'Open', this message disappears. Sometimes it opens, but the message is completely scrambled with letters and symbols.

  Cannot open DOC files in wordpad or Notepad. you will need a more advanced software suite. Try OpenOffice.org - it's free, and it supports the DOC format. But the best solution is to get Microsoft Office once and for all.

  Download OpenOffice.org: http://download.openoffice.org/contribute.html?download=mirrorbrain&files/stable/3.2.1/OOo_3.2.1_Win_x86_install-wJRE_en-US.exe. Note: Click on the link at the bottom that says "http://download.services.openoffice.org/files/stable/3.2.1/OOo_3.2.1_Win_x86_install-wJRE_en-US.exe" to download the program.

  This should solve your problem,

  Rifdhan

• People who receive e-mails that are originated in Windows Mail are unable to reply, reply all, or forward.

  People who receive e-mails that are originated in Windows Mail are unable to reply, reply all, or forward.  In order to reply, reply all or forward my emails, they must create a new email and send.

  Send a message to yourself using Windows Mail. What happens when you reply to this message?

  Tools | Accounts | Email account | Properties | In general. Your email address is correct? If there is a response email address, delete it.

  Bruce Hagen ~ MS - MVP [Mail]

• How can I open an image that is sent by e-mail? I can see the image at the center of the window

  Original Tilte: how to open an image that is sent by e-mail? I can see, but little in the middle of the window.

  Hi Sevilla55,

  1. what email software do you use on the computer?

  2. What is the size of the image sent in the email?

  In order to open or view the photo sent in a message e you must first save the attachment and see later.

  (a) open the program that you use on the computer

  (b) open the message that contains the image.

  (c) in the message window, click the file menu and then click on save attachments.

  (d) select the location where you want to save the attachments.

  Once the image is saved, then right-click on it and select the program you want to open the image.

  View and use your pictures in Windows Photo Viewer

  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. It's someone

  Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. Someone from Adobe is reading this? How can I get this fixed a problem? Thank you.

  Download Acrobat products | Standard, Pro | DC, XI, X

• Opening documents that are in a book (CS4, JS)

  Hello

  Just had a look through the ESTK object model, and I couldn't see a way to open a document that is in a book, through the book (so the script action no would be to open the book file, then by double-clicking the document in question). Can I obivously get the path of the file of a document in the book and open it another way, but I try to avoid the triangle "modified outside the book"document"error during processing and registration of documents that are in a book.

  If anyone has any pearls of wisdom, I'm all ears.

  Thank you.

  Murral wrote:

  ... Can I obivously get the path of the file of a document in the book and open it another way, but I try to avoid the triangle "modified outside the book"document"error during processing and registration of documents that are in a book.

  What I'm missing here? If you have an open book and you can check what are the documents it contains (using BookContents), and possibly to open, you can also edit and then save these docs. No triangles signaling - because the book is also not openen, and you will notice some changes.

  Only if you do something unexpected, as open book, open a document from the book, then close the book before validate your changes... it will earn its triangle of Sue. But then again, he would do the same if you do this manually.

• I need to open attachments that are in an encrypted format FDF. They are all encrypted in my Inbox of profiles.

  I use PerfectScript command to open my profile Inbox file so that I can access email that I sent to someone and they send to me as an Adobe FDF file. When I open the email inbox file in WordPerfect x 7 in my folder of appropriate profiles, then I can see the email, but the fdf attachment is encrypted. How to decrypt data using the code of command so I can access the data of the file to fill that was sent to me?

  Please mark this as resolved. Thank you.

• How can I find an agent I chatted with that? The email with a link that he sent said my e-mail address is not in the folder, and my computer doesn't have internet access once it has access to my office.

  I had the technical support to help me access the internet.  It was slow in response and doesn't seem to understand what I needed.  Invited access to my office, and at that time, I was tired of him saying the same thing over and over again, so I went offshore.  Then I found that my computer doesn't have internet access either.  I tried to find him, found the email that he sent but when I clicked on the link and put in my email address as requested, the answer says that my email is not in the folder (!)

  Question: is there a live person I can talk to about it?
  My question: 1) my internet access definition had been changed, folder 2) microsoft says my email address is not registered.  The service ID was 1158399549ID SRX.  I think it is ridiculous that a SRX is sent to my email address and then says that it is not in the folder.  (3) when I asked for help and put in my product ID, message indicates the product is not taken in charge in the country, USA.  What is going on?  Where the product is supported then?
  Can someone please help and explain that to me?

  Hello

  I'm sorry but this is not Microsoft

  These are public Forums, hosted by Microsoft

  We are mainly users of vista companions giving free help in our own free time

  I suggest that you raise your point of contact with Microsoft

  Owners of OEMs (Dell, HP, etc.) are not eligible for free Microsoft Support

  If the above is you, this is why your product ID is not working

• Cannot download files that were sent by e-mail

  When a file is sent and I click 'Download', I wonder if I want to save or open the file.  I click on save and get the message: «...» ". doc contained a virus and was eliminated.  However, when I opened my e-mail on another computer on my network (or even at home, by the way), I am able to access the file in question without any problem.  "By clicking on"More"takes me to a tutorial for Windows (page 9) that contains information about Internet Explorer" but has nothing to do with the issue of viruses.

  Rick721,

  You can follow the procedure proposed by the lifeboats to disable the antivirus application and placing the computer in the boot. If the problem persists, you can run scanning for viruses using the Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Keep us informed.

• VPN clients are unable to access sites that are above a link from site to site

  could someone please give me some direction, I have a set of vpn clients set up on a pix and I'm trying to give them access to a network that is connected via a link from a site that is set up on the same pix. so, basically, that it receives information from VPN client on the same interface, it built the tunnel from site to site, I've heard that's not possible is that the case. Or it can be fixed, I can provide diagrams and if necessary conf files.

  You are right. You need a minimum of 7.0 for the feature you're looking for.

  Kind regards

  Arul

  * Please note all useful messages *.

• Unable to access files that are engraved on DVD as Live file system

  Original title: I burned my files on a DVD as LIVE file system. When I return to access they are not

  Using Vista Home Premium. Burned many DVDs this year. Burn the content of several files on DVD for backup. (use the DIRECT file format). Today, I put one of the DVD in the drive to access the files and get the message "Files Drag here to add them to this DVD"

  In computer science, it shows amount of space available on this DVD is free of 4.38 GB 895 MB, but I can't access all files - explores or Open.

  How can I recover my files and ensure that the next DVD retains the content?

  Hi Pampro,

  1. don't you burn the files on DVD-R or DVD - RW?

  Acts of filesystem as flash drive live where you can burn the files in multiple sessions and this is the reason why you got the message "Drag files here to add them to this DVD" and it also shows that 895 MB is free to 4.38 GB.

  This means that the files on the DVD are either hidden or the files may have been deleted.

  If you try to view the files and then verify or even try to run the DIR command to check the files on the DVD player.

  a. click on start, all programs, and then click Accessories.

  b. right click on command prompt and select run as administrator.

  c. in the drive letter command prompt window type of DVD player and then press ENTER.

  d. then, type DIR and press ENTER to check the files on the disk.

  For more information, see the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I cannot open the files in a folder that are all copied e-mail messages to a flashstik. Msg.

  E-mails have been saved from MS outlook within a company network via the flash stik and now with MS windows Vista in my computer at home, they come to the top upward with gibberish.

  Hi robbie and Bron

  Refer to this link and check if it helps:

  http://support.Microsoft.com/kb/824122

  If this is not so, the question you have posted is related to Microsoft Office and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.