Unable to allow the engine to mercury using openCL, when he did before.
Hello my fellow artists digital,.
So I have a laptop with a card of gfx mobilty Radeon 5800. I know that its low with 1 GB and I need a better.
But here's the thing. The other day I went to edit videos of baby quickie & when I did the new project the normal Mercury engine drop-down is not grey! I had the opportunity to use it on my hardware, IE... No only software mode. It has a great without any problem and made me think that I might not upgrade my lappy so fast.
SO I went to work on files that makes my computer before studder and today I don't have the option, only software mode.
I ran a vid card check to make sure it was working & always good; He has done & a. The only change I did anything was moving where I want my zero files which I can't change anything.
Any reason, that I would have the opportunity to use the reading Mercury on the map engine but now I don't have? Is there a way to change that is not in the new project settings?
I felt like I saw Elvis in the café-restaurant & when I went with a camera he disappered. Thanks for your help!
@IdeaJason
AHa! I'm so smart that I thought about it! I was clicking the CS6 version and not CC. See, smart.
I guess CS6 won't let you use it and CC is.
I'm happy to have just a single Sherlocked. (feel sorta silly to have two full versions and not to change the shortcut on the desktop)
Tags: Premiere
Similar Questions
-
Unable to see the photo on gmail using firefox
I'm unable to see the image of some mails in gmail using firefox, it works fine in Explorer
IV checked exceptions in tools > Options > content: Load Images > Exceptions and it seems fine
in gmail > mail in the Inbox and click the link "always display images of.
-
ORA-39070: unable to open the log file, while using expdp
Hello
Please notice why I get ORA-39070: unable to open the log file.
When you run the expdp against the default directory: the expdp DATA_PUMP_DIR is completed successfully.
-current direcory on the Linux file system:
-Create directory and grant of read/write on it$ pwd /log_files/oracle/cdl1
-Verify the existence of the directory:$ sqlplus sys/xxxx@cdl as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Wed Feb 22 16:36:01 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> create or replace directory EXPTEMPDIR as '/log_files/oracle/cdl1'; Directory created. SQL> grant read,write on directory EXPTEMPDIR to system; Grant succeeded.
Check for permission to write to the directory:QL> select * from dba_directories; OWNER DIRECTORY_ DIRECTORY_PATH ---------- ---------- -------------------------------------------------- ... SYS EXPTEMPDIR /log_files/oracle/cdl1 ...
-try to expdp:[/log_files/oracle/cdl1]$ touch 1 [/log_files/oracle/cdl1]$ ls -l total 0 -rw-r--r-- 1 oracle oinstall 0 Feb 22 16:38 1
expdp system/xxxx@cdl FULL=y DIRECTORY=EXPTEMPDIR dumpfile=expfull220212.dmp Export: Release 11.2.0.3.0 - Production on Wed Feb 22 16:38:33 2012 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options ORA-39002: invalid operation ORA-39070: Unable to open the log file. <<<<<<<<======= ORA-29283: invalid file operation ORA-06512: at "SYS.UTL_FILE", line 536 ORA-29283: invalid file operation
Post pl OS details - it's an RAC instance?
Error ORA-39002 ORA-39070 ORA-29283 ORA-6512 when you use Export DataPump (EXPDP) [ID 1305166.1]
Export DataPump (EXPDP) triggers errors ORA-39002 ORA-39070 ORA-29283 ORA-6512 on RAC Instance [1317798.1 ID]HTH
Srini -
Message "Unable to locate the hard drive" after using XP Pro recovery disk
I used my reinstall windows Home drive to recover a file system corrupted on a windows operating system pro. I hit the 'R' to repair key when he asked but now when I rebooted... I get a message "unable to locate the hard drive. Does anyone have an idea what went wrong? And I order a Windows OEM Pro installation disc and just do a clean install?
-
How to allow the user return to give lectures when they take a quiz?
Hello world
I'm new to Captivate and now I'm kinda in a dilemma. Thank you for your
time to look at my post!
I created a CBL in Captivate 3, the first 10 slides is a conference and he
is followed by a quiz of 10 slides, defined as standard SCORM.
I want that the learner must be able to refer to the Conference when they
Take the quiz, I tried 2 approaches and they both
issues in different ways.
Approach 1: "allow moving backwards" and "infinite attempts. The
problem with this approach is when the learner clicks on "review the.
quiz"and when they click"back"on the first slide of questionnaire, all
Quiz will start everywhere, the score is reset to zero.
Because the quiz is seeing this as a new attempt and that the learner is
permit to make "infinite attempts" such that it has been configured.
Approach 2: "Allow moving backwards" and leave only "1 attempt.
The problem with this approach is, when the learner is in the Middle
Quiz and refers to the Conference, the quiz will be
automatically shown as completed. And the learner will not get a
chance to answer these questions unanswered.
It seems that every time that I leave the learner refer to the Conference
in the middle of a quiz, the quiz will be seen as completed. Who am
I did wrong? Is there a better approach I can "allow backward
movement' and always allow resumes user their quiz where they have left
in the distance?
Sorry for the long post, I was not able to express it in a more
concisely.
Any help is really appreciated!
-DavidWhat you see is the behavior designed as in Captivate for the quiz.
Each Captivate movie has a range of "quiz", which starts with the first measurable purpose and ends at the Quiz results slide. If you enter the scope of quiz by starting a slide of questionnaire, then jump back away from quiz, to return to the basics, default behavior of Captivate is to freeze the quiz at this time here. Then when Captivate refers to allow movement to the rear, it is talking only a move backward in the quiz.
For example, if you get to question 1, but no answer and proceed to question 2 answer that we can go back to question 1, you will still be able to answer question 1. The test will not be frozen. However, if you had jumped to any slide before question 1, your quiz would have been frozen with everything that you mark had accumulated at this time here.
There may be a workaround that you can use to get closer to what you want. As any object that is classified as part of the quiz, you can add a button on one of the first slides that the user must click to move forward. Set the properties of this button (or click on the box) to report a score for the quiz. What makes a part of the scope of quiz. Now, any content slides falling after this slide button are also within easy reach of quiz and return to them will not have the same effect of freezing the quiz.
Please keep in mind another aspect of the quiz questions: If you answer a quiz question, and then move off the slide (forward or back) quiz question answer is frozen and cannot be modified unless resume you the Quiz or raise all of the module.
Hope this helps to clear up how things work.
-
Firefox v.41 asking to allow the modules whenever I use Firefox
Using Windows 7 - since installation v.41 whenever I use Firefox it asks me to activate each add-on and not automatically by loading automatically - how can I stop this from happening? I want that they automatically load as if they were with v40.
It is possible that there is a problem with the files that store the registry extensions.
Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.
New files will be created if necessary.
See "extension corrupted files:
- http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
- https://support.Mozilla.org/KB/unable+to+install+add-ons
If you see disabled extensions or is not compatible in ' Firefox/tools > Modules > Extensions ' and then click the Tools button at the left end of the search bar to check if there is an update available compatibility.
If this did not help, then also delete the files addons.json and addons.sqlite possible.
Alternatively, you can check for problems with preferences.
-
I'm unable to type the quotation marks or use a rear brace.
First of all, I don't have this problem if I use Internet Explorer, I don't like. I'm unable to type some kinds of special mark - Apostrophe, slash - or back space, space before or hit end. A strange thing arises at the bottom of page whoing what I am typing there.
This has happened
Each time Firefox opened
Is about 3-4 weeks ago
See http://kb.mozillazine.org/Find_bar_opens_when_typing_in_textbox
-
Hi well the problem seems to be that whenever I try to use any type of device and try to connect using a wireless connection to my router, I can't find an access point or no signal at all of it, but when you use a wired connection, it works perfectly. For example, I'm trying to connect my Wii to the internet via a wireless connection, but I can't find any access point so that it can connect to. So I went to my router configuration and I didn't know what to do to allow a shown access point or wireless to all activity. Theres no wireless tab or whatever it is to install, so I didn't allow remote administration, but still I could not find an access point. I don't know if im just made bad or I need an update of the firmware (mine is currently 1.04.02) or what else. If the help would be nice
BEFSR41 isn't a wireless router... It is wired.
-
Can not ping so allow the engine to Base on Windows Server R2 filtering 2012
Hello
My windows platform is Windows Server R2 2012.
My problem is that I can't ping the server during execution of the server BFE.
I had already opened the ICMPv4 and v6 in the inbound rules. I also had to open inbound TCP 3389 port.
I have once again allow all traffic entering the firewall rules.
I tried to ping; error - request time-out
I tried Telnet; No output.
Can I know how to activate the ping while the BFE is running?
Thank you
Kind regards
Aghiles
Ask in the forum Windows Server:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
My company uses sap and I have java but this morning I tried to do the ussual and now he says that I am not on web dynpro do I do?
Hello
As you refer to the program Web Dynpro, I suggest you to contact the manufacturer for assistance.
-
Why a method to create a constraint would allow the index to be used, but not another.
Hi all
With the help of:
Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production
SQL Developer Version 4.0.2.15
I had to do the following query on a table.
Select distinct chdrnum, tranno
of ractpf_pgr;
I ran the setup of SQL in SQL Developer, who told me that he was doing a full table scan,
(It's what you get using SEPARATE!)
After some research, I discovered that if I put in question on columns not null check constraints
and then recreated the index based on these columns, I'd get a full index scan instead of a table scan.
Good news - off, I went and tried using the following method (I think it's call a constraint of out-of-line)
and created one for each colmn using snytax below.
ALTER table RACTPF_PGR add constraint CS_CHDRNUM_NN check (CHDRNUM is not null) validate;
Ran my SQL Tuning Advisor again - no joy - a full table scan that was happening.
Did some more research and recreated the constraints with the help of an online method
ALTER TABLE RACTPF_PGR CHANGE (CHDRNUM CONSTRAINT CS_CHDRNUM_NN NOT NULL);
My SQL Tuning Advisor is represented - and yes the index was used.
But what I want to know why a method would cause the index to use another does not
Thanks in advance.
The second is a NOT NULL constraint.
The a ('is not null') is technically not a NOT NULL constraint.
Give me a moment to start my database, and I will demonstrate.
Edit: Here's the demo:
SQL> create table x (a number null, b number null); Table created. SQL> alter table x add constraint a_nn check(a is not null) validate; Table altered. SQL> alter table x modify (b constraint b_nn not null); Table altered. SQL> select column_name, nullable 2 from user_tab_cols 3 where table_name = 'X'; COLUMN_NAME ---------------------------------------------------------------------- N - B N A Y
The index does not store registrations for the lines where all components of the index are null, then the optimizer needs to see that the columns are not nullable to be able to use an index scan.
-
Unable to limit the amount of characters using {tag_name} under webapps
Nice day
We have a WEB APP for and must limit the amount of characters that are displayed on the Web page under the view of LIST of WEB applications. and we tried the following:
{tag_name, 10}
{tag_name, 50}
{tag_name, 400}
{tag_name, 400}
It does not matter what I try, it shows all the characters on the name of this WEB APP.
for example web app name:
Test event 1 Test event 2 Test event 3 Test Event 4 Test event 1Test event 1Test event 1 Test event 2 Test event 3 Test Event 4 Test event 1Test event 1Test event 1 Test event 2 Test 3 Test 4 Test 1Test 1 event event event event
Is there a way to limit these, im I something wrong? @
Hello
{tag_name} at the point in the webapp doesn't have this feature, so you have mixed two things here, the tag name and
{tag_description, number of characters}: Description of the element (content editor). On the 'Layout (Backup) list', you can use {tag_description, 10} to display the first 10 characters of description of the element of the webapp.
Hope this helps
-
Unable to access the remote PC APEX using url
Hi all
I'm under 11g R2 on a desktop computer and that you have configured APEX 4.1. I am able to access all of the pages that I should be able from a browser on localhost.
But I am trying to remotely access from PC, I Internet Explorer can not display the webpage.
I have read the documentation and tried everything I could think or find all to nothing does not. It's my first attempt @ APEX, so I'm learning.
Any suggestions on what to check?
I use the
by default the port of * 8080 *.
Installation shows as valid
Public_User is unlockedHello.
Check your settings in firewall Windows/Linux/mac
Eduardo
-
Unable to determine the correct Content Type or length when connecting via HTTP
Right now I'm developing a streaming audio application.
And I have the resources and the sample apps u.
Then when I open a connection and I print the content type of the page that contains the audio file
It shows a text/plain type.
The length is also displayed but bad as: 24.
So basically it is not consider as an audio file.
Next when I try a random url like http://www.google.com
The length is always-1. (impossible to determine the length)
The content type is correct.
And when I pass some invalid/non-existent url, it gives a number at random. like 29 or 39.
Suggestions/ideas?
Thank you
http 413 error. Take a look at this thread:
-
By a process of elimination, I' ve worked that the vertical scroll bar is affecting the positioning of my pages and causing a small lag in the menu bars and header when I move between pages that have a vertical scroll bar and which don't. Is it possible to configure pages so that those who do not need a scroll bar have a space where is the scroll bar?
Simple - force all pages to have one with this CSS:
HTML {overflow - y: scroll ;}
Maybe you are looking for
-
He wants an administrator password to download. What is it?
I tried to download Firefox in multiple ways. I myself decently close crosses the main download screen (select your language), but in the end he still wanted this dang password. Then the devil what the dang password?
-
Skype stops working when signing
So I had to "hard" reboot my computer with the power button. Reboot and now Skype connect. It goes for a few seconds then I get a notification saying that it has stopped working and do not know if it is plugged into is chrome said that he could not v
-
Upgrade windows 7 to 8.1
Hi all I have windows 7 and I decided to update my computer Windows 8.1 (I have it as a ISO file), the question is: if I choose the option to upgrade, it means that all my data and installed programs will migrated me to 8.1 (I am not incompatible pro
-
Question on get windows serial
Hello I just bought a new computer dell laptop that comes with windows 10 already on it. in the past, you would get some kind of a stock ticker with the windows product key in case that you want to format the computer or reinstall. apprantely now you
-
VMWare Player freezes my ubuntu all 14.04
I use VMWare player to run a Windows 7 comment system, and after a while, my whole system crashes, so I have to turn off my computer at hand.It happens all the time, sometimes sooner or later.