Similar Questions

• "The session is not authenticated" when you try to convert it to VMWare Infrastructure Server computer machine

  The image was a Linux P2V conversion... I didn't have my ESXi server on the same network, so I just used the Converter 3.0.3 Startup disk to create my virtual image (RHEL 4), and now I'm trying to use the 4 converter to convert the image from the server to the ESXi server.  When I do a "convert", I select 'VMware Workstation or another VMware virtual machine', browse my virtual machine's .vmx file.  In the next screen, I select "Virtual Machine of VMware Infrastructure" in the menu drop down and put my server, including the password information in the boxes below.  I click Next and that works fine, it connects.  From there on, I leave all the default settings and click Next... immedietely at the top of the window, I get "the session is not authenticated.   I did not find anything about it either with the search function, apologize me if I missed something.  Someone else encountered this?

  This happened to me when the time updated Inbox ESXi causing a shift in the session information on the host computer, which I was trying to convert.

  The fix was to bounce the agent converter on the server you are trying to convert.  For me all right.

• Unable to connect to the server of VMware Workstation

  I'm running ubuntu 13.04 (I know only is not officially supported at this time), however, when I navigate my browser to the virtual server (that I configured it using the port 10250), I get the following message is displayed:

  Access to the denied Web page

  Less

  You are not allowed access to the Web page at https://server:10250 /. You may need to connect.

  Error code: 403

  Status of it running:

  Andrew@server:~$ vmware - version

  VMware Workstation 9.0.2 build-1031769

  Andrew@server:~$ sudo service start vmware-workstation-server

  From Workstation Server: fact

  Andrew@server:~$ sudo netstat - apn | grep vmware

  TCP 0 0 0.0.0.0:10250 0.0.0.0: * LISTEN 7878/vmware-pass

  TCP 0 0 127.0.0.1:8307 0.0.0.0: * LISTEN 7878/vmware-pass

  TCP 0 0 0.0.0.0:902 0.0.0.0: * LISTEN 1703/vmware-authdla

  tcp6 0 0: 10250: * LISTEN 7878/vmware-pass

  UNIX 2 [ACC] STREAM LISTENING 37086 6047/vmware-unite-h/tmp/vmware-root/unity-helper-ipc-: 1

  UNIX 2 [ACC] STREAM LISTENING 11814 1991/vmware-usbarbi/var/run/vmware/usbarbitrator-socket

  UNIX 2 [ACC] STREAM LISTENING 42569 7878/vmware-pass/var/run/vmware/proxy-Web server

  UNIX 2 [ACC] STREAM LISTENING 42580 7878/vmware-pass/var/run/vmware/root_0/1371168951002706_7878/ha-nfc-fd

  UNIX 2 [ACC] STREAM LISTENING 42587 7878/vmware-pass/var/run/vmware/root_0/1371168951002706_7878/ha-nfcssl-fd

  [of] UNIX 2 CONNECTED FLOW 37087 6047/vmware-unite-h/tmp/vmware-root/unity-helper-ipc-: 1

  [of] UNIX 3 CONNECTED STREAM 35127 5534/vmware-tray

  [of] UNIX 3 CONNECTED STREAM 6047/vmware-unite-h 35819

  [of] UNIX 3 CONNECTED STREAM 43388 7878/vmware-pass

  [of] UNIX 3 CONNECTED STREAM 42564 1991/vmware-usbarbi/var/run/vmware/usbarbitrator-socket

  I get this message, if I run it on the local host, or if I run it on another machine.

  It's the only thing I see in syslog:

  Cat/var/log/syslog | grep vmware

  June 13 to 17:04:04 server/usr/lib/vmware/bin/vmware-hostd [8970]: password accepted for user andrew 127.0.0.1

  June 13 to 17:37:04 server/usr/lib/vmware/bin/vmware-hostd [8970]: password accepted for user andrew 127.0.0.1

  June 13 to 17:54:56 Server/usr/lib/vmware/bin/vmware-hostd [8970]: password accepted for user andrew 127.0.0.1

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / usr/lib/vmware/settings ': no such file or directory.

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: Preferences file of the option PREFS not found in/usr/lib/vmware/settings. Using the default values.

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: Acquired the lock to/var/run/vmware/authd_14937f64dcf6846b509ee5705e0270eb

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: unlocked lock for/var/run/vmware/authd_14937f64dcf6846b509ee5705e0270eb

  June 13-20:13:42 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  13 June at 20:13:48 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  13 June at 20:13:55 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  June 13-20:14:02 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  June 13-20:14:06 server named [1418]: fix error (network unreachable) 'my.vmware.com.edgekey.net/A/IN': 2600:1401:2:42 #53

  13 June at 20:14:09 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  13 June at 20:14:29 / usr/lib/vmware/bin/vmware-hostd [2275]: last message repeated 2 times

  13 June at 20:14:29 / usr/lib/vmware/bin/vmware-hostd Server [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:02 / usr/lib/vmware/bin/vmware-hostd [7008]: last message repeated 3 times

  13 June at 20:15:04 the server kernel: [3056.496451] vmware-gksu [7037]: Segfault at 7f353f7591aa ip 00007f3547c38156 sp 00007fff95cf93d8 error 4 to libc - 2.17.so [7f3547bb0000 + 1be000]

  13 June at 20:15:05 Server/usr/lib/vmware/bin/vmware-hostd [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:07 the server kernel: [3059.388927] vmware-gksu [7085 or]: segfault at 7fc4c9f331aa ip 00007fc4d253b156 sp 00007fff04d21118 error 4 to libc - 2.17.so [7fc4d24b3000 + 1be000]

  13 June at 20:15:09 the server kernel: [3060.572580] vmware-gksu [7130]: Segfault at 7f68319561aa ip 00007f6835e04156 sp 00007fff7ce94c98 error 4 to libc - 2.17.so [7f6835d7c000 + 1be000]

  13 June at 20:15:09 Server/usr/lib/vmware/bin/vmware-hostd [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:14 Server/usr/lib/vmware/bin/vmware-hostd [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:17 the server kernel: [3069.298603] vmware-gksu [7548]: Segfault at 7f4d5bdeb507 ip 00007f4d64350156 sp 00007fff78106918 error 4 to libc - 2.17.so [7f4d642c8000 + 1be000]

  So I was wondering if anyone else has similar problems, I thought maybe it was the port that he was running on, and chrome doesn't, unfortunately, I can't find a way to change the port (as running with root, does not this either).

  I was confused Workstation Server with WSX.

• using the converter no option for "Type of Destination." I am allowed only 'VMware Infrastructure virtual machine'

  Hi, I am looking to convert my localhost Ubuntu 9.10 for a machine virtual (vmdk) using vCenter Converter Standalone Client 4.0.1.

  I am at the step #2 (specify the Destination) and I expect to converter to allow me to choose a path to store the hard files.  However, 'Destination Type' does not have any selection - only 'VMWare Infrastructure virtual machine' is available.  (also there is input to the server, username, and password fields)

  What I am doing wrong?

  Thank you

  Hello

  using vmware converter 4.01 when virtual do physical power machines Linux the only available destination is ESX (i) server.

  One possible way to solve this handicap can be what makes an image of the Linux system using one of support for the products of the image and then use the vmware converter to set up the image of Linux box as a source and destination that it doesn't have to be a server ESX (i)

  If it comes to an eventual conversion, you can use a trial license with the product of the image (e.g. acronis true image or norton ghost).

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• An error occurred while renewing interface wireless network connection: unable to contact your DHCP server. Request a expires.

  I use an Acer Asspire One with Windows XP. We have wireless through AT & T Uverse. The netbook has an Atheros AR5007EG Ethernet card.

  A number of things have taken place lately: I had not used the Acer for some time and the battery was dead and would not recharge. I could book until when it was plugged, but could not get on the Internet. I found online that the solution to the battery problem was to download a new bios that worked wonderfully and it is now loaded. Recently, our AT & T router died and was replaced. I put the new WEP keys in two other computers, and they connect to the Internet. I can't connect to the Internet with the Acer. I tried ipconfig / renew and get the error message: "an error occurred during renewal of the wireless network connection interface: unable to contact your DHCP server.» Request a expires. No operation can be performed on Local area connection while it has its media disconnected. "On the tab"Choose a wireless network", it shows my network and said"absorbing the network address"but nothing happens. When I do ipconfig I see that there is no IP address.
  I took the computer to Starbucks this morning, ran ipconfig / renew and she acquired the IP address and I was able to connect to the Internet. I brought the computer home and tried and failed to connect. The IP address is back to 0.0.0.0 and the error message appears when I try to renew it.
  I hesitate to make a lot of changes since it was working with a different network.
  Original title: IP address is missing
  These forums are wonderful. I tell myself that I've saved the cost of a new battery using the bios, I found on a forum!

  Hello

  DHCP - Dynamic Host Configuration Protocol is a protocol used by devices computer network (DHCP clients) that dynamically distributes the IP address of the destination host. Now the error indicates that your computer is not able to communicate with the server and assign the IP address.

  Method 1:

  Let us try to disable the firewall and check the issue.

  Note: Re-enable the firewall after checking the issue.

  Check whether the problem is resolved.

  Method 2:

  If the issue is not resolved, you can follow the steps from the link provided and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Hope this helps and let us know if you need more assistance.

• Can not activate sharing / "unable to configure the workstation server.

  Everything was going well until I made the mistake of upgrading to 12.1.1 build-3770994 12.0 (?)

  For some reason any sharing became disabled after upgrade.

  I can't activate the sharing, I get "unable to configure the workstation server.

  Seems every time I've upgraded to VMWare Workstation, something breaks

  I had to moce the VMs shared virtual machines 'normal' so I could run them.

  I fixed it, uninstalled and reinstalled and still the same failure.

  I took a look at the downloaded files and datastores.xml is empty, which is a little weird.

  Hostd.log, he crashed during the analysis of the datastores.xml file:

  2016-05-26 T 10: 11:07.572 - 07:00 verbose spend [08848] [sub Originator@6876 = Hostsvc] StorageNativeProvider: inventory filepath is C:\ProgramData\VMware\hostd\datastores.xml

  2016-05-26 T 10: 11:07.573 - 07:00 panic pass [08848] [Originator@6876 sub = default] error: class Vmacore::Xml:XMLParseException(not_well-formed_(invalid_token))

  2016-05-26 T 10: 11:07.580 - 07:00 panic pass [08848] [sub Originator@6876 = Default] backtrace:

  You may try to remove the config files during uninstall Workstation, and then reinstall the workstation.

• Sizing of VMware Infrastructure

  If you are going to build a VMware infrastructure, consider yourself the hyperthreading the processor function in order to have several virtual machines per server.

  Example:

  carrots 2 x 10 = 20 hearts (Physics)

  40 carrots (with hyperthreaading)

  I guess that 75% will be used for virtual machines and 1 vCPU per VM

  1-15 virtual machines for physics

  2 30 VMs with hyperthreading

  which is the best architecture, based on the physical cores or it is safe to use the feature hyperthreading for VM deployment.

  Finally, if I use the physical cores, is it safe I guess 1 physical core = 4 vCPU?

  Thank you!

  You must not consider hyper-threading, you still share the physical heart.  Here is a good article about the sizing and hyper-threading Gotcha Hyper-Threading with Machine vCPU virtual sizing - Wahl network

  It's safe I guess 1 physical core = 4 vCPU?

  You should never assume anything in a design unless support can be posted in the event of oversubscription, you must confirm that your workload won't suffer degradation performance if the CPU use increases.  You really need to understand the workload and usage patterns.

• VMware vCenter Server Appliance 5.1 is not Autostart cluster

  Problem:

  After a VMware vCenter Server Appliance failure does not start automatecly.

  I have configured to start automatecly to each host, but it does not start automatecly.

  My configuration:

  Shared infrastructure-plate-forme PowerEdge VRTX with 3 servers running

  -3 x VMware ESXi 5.1.0 (799733)

  -1 x VMware vCenter Server Appliance 5.1

  -Servers run as a cluster with HA.

  Unfortunately Autostart VM is not supported in a Cluster, and so the settings are ignored. VM in clusters must be turned on manually (or using a script,...).

  André

• Data growing in vmware esx server disk 3

  Hi, I have been asked by a colleague If I can be useful to expand d: ------disc on an existing virtual windows server 2003.

  They use:

  VMware ESX Server 3i Version 3.5.0 Build 110271

  VMware Infrastructure Client Version 2.5.0 build 119826

  Is it possible to extend the disc in vSphere clienten, start by clicking on the edit \ disk and then expand the *. wmdk file of 25 GB to 40 GB? After this connection in the server and expand the disk using a few better disk expansion program.

  / T.

  Yes, it should work even with the virtual machine. After having developed the virtual disk in the graphical interface, connect to the virtual machine Windows 2003 (or open the console or via the administrative RDP session) and rescan storage in disk management. Assuming that the data disk has only one partition or is the last partition on the disk and does not have the file exchange/swapfile on it, you may even be able to extend disk space by using the diskpart command-line utility.

  André

• Unable to connect to the server vCenter because the user name or password not valid

  Hello

  I have a VMware View version 5.1.0 installation (704644) and when I try to add additional virtual machines to an existing pool I get the message (cannot connect to the server vCenter because the username or password are invalid).

  I have checked all the instructions below and still failed to add virtual machines

  If you are unable to connect to vCenter Server:

  1. Confirm that a network port exists and is available. For more information, see increase the number of ports assigned to a virtual switch for VMware View (1026014).
     
     
  2. Confirm services VMware View manager are running. For more information, see check which required VMware View Manager services are running (1026136).
     
     
  3. Confirm that the network is correctly configured for use in a VMware View environment. For more information, see in the VMware View virtual desktop network configuration (1026498).
     
     
  4. Confirm that name resolution is functioning properly in your environment. For more information, see audit for VMware View DNS settings (1026017).
     
     
  5. Check that the permissions/credentials are correct for the user of the vCenter server. For more information, see confirm/credentials permissions are correct for user vCenter/vCenter server (1028705).
     
     
  6. Confirm that outcomes of the interaction of third parties do not exist with the operating system. For more information, see the confirmation that there are no questions of third-party interaction with the OS in a VMware View environment (1027466).
     
     The virtual machine, I have already assigned to this pool, I can access. I can access by using the client view and also from the console.
     

  Has anyone else seen elsewhere?

  See you soon

  You have the same problem with other pools?   Have you returned through configuration under the Configuration/servers view vCenter configuration?

• For Vmware Infrastructure details DropDown is EMPTY

  I'm a newbie in the converter and I'm doing a P2V using Converter 5.0 running on a Windows 7 computer where I am using VMware Workstation 7.  The source is a physical machine running Ubuntu 11.10.

  I spent an initial problem regarding root privileges using sudo in config xml files the agent and the worker.  When I get to the next screen, I expect to be able to use the drop-down list to select VMware Workstation Vmware infrastructure (see screenshot).  The problem is that there are NO options to choose from.  When I click on the drop down arrow, nothing happens.

  I did research in the community and on Google but could not find something to help.

  Everyone knows this?  Can you please help?  Thank you.

  The user's guide, p. 46:

  NOTE for conversions of machines source power that run on Linux, the only supported destination is a
  Destination of VMware Infrastructure

  Concerning

  Plamen

• VMware infrastructure network for exchanging

  Dear all,

  I'll provide exchange messaging system. Could you pls files Vmware infrastructure network for the exchange e-mail system.

  Thank you

  NHA

  Please find the following links to help you with your design;

  http://communities.VMware.com/docs/doc-13273

  www.VMware.com/PDF/exchange_best_practices.pdf

  http://www.MSExchange.org/articles_tutorials/Exchange-Server-2010/high-availability-recovery/what-actually-is-JBOD-how-might-used-Exchange-2010.html

  http://www.thecabal.org/2010/01/from-whence-redundancy-Exchange-2010-storage-essays-part-1/

• Workstation 8 vmware-workstation-server works not not on Ubuntu 11.10

  Hi people:

  Just, I have upgraded my Ubuntu 10.10 to 11.10 and replaced VMWare Server 2.0 with Workstation 8.02.  It seems that the vmware-workstation-server service is not running.  I'm unable to connect from a web page and the application vmware itself is not able to connect.  When I try to activate the dialog application vmware service I get the following messages in the terminal window where I ran vmware:

  update root@naplesubuntu:~#-rc.d: WARNING: /etc/init.d/vmware-workstation-server LSB missing information
  update - see rc.d: < http://wiki.debian.org/LSBInitScripts >
  Adding system for etc/init.d/vmware-workstation-server start...
  /etc/rc0.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC6.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC2.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/rc3.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC4.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  From Workstation Server: fact

  If I disable the vmware application service, I get the following in the terminal window:

  root@naplesubuntu:~# remove any links of the system for etc/init.d/vmware-workstation-server...
  /etc/rc0.d/K01vmware-workstation-server
  /etc/RC2.d/S03vmware-workstation-server
  /etc/rc3.d/S03vmware-workstation-server
  /etc/RC4.d/S03vmware-workstation-server
  /etc/RC6.d/K01vmware-workstation-server
  Stop server workstation: fact

  If I believe that the service is running, but not doing anything, even though I do not see a specific process for this and there seems to be a vmware-workstation-server executable in/usr/bin.

  Not very well where to go from here.   I tried to uninstall and reinstall the workstation and even using a different port number for the Desktop server, but without any result.

  Suggestions welcome.

  Are you running other services on port 443 on this host?

• VMware vCenter Server, 4.1.0: resources for customizing Windows were not on the server.

  By using the vSphere Client, I created a customization of comments with 'Virtual Machine OS target' = "Windows".

  Then I tried to deploy a virtual machine from a Windows model. In the model "deploy" dialog box, in the "Guest" Customization screen, the 'customize using an existing customization specification' is grayed out and disabled and I see the following warning:
  Resources of Windows customization on the server have not been found.
  Why am I unable to use the comments Windows customization that I created?
  I am running: VMware vCenter Server, 4.1.0 345043 on Windows Server 2008 R2
  According to the VMware Knowledge Base system, preparation tools are integrated into the Windows Server 2008 R2 operating system and do not have to be downloaded
  Can someone help me solve this problem?
  Thank you

  Hello

  You can find the deploy.cab 2003 here: http://www.microsoft.com/download/en/details.aspx?id=23096

  XP here: http://www.microsoft.com/download/en/details.aspx?id=11282

  You must copy sysprep (extracts from the .cab) files on c:/programData/VMware/VMware VirtualCenter sysprep / (os)

  Concerning

  Stéphane Grimbuhler

  Senior consultant virtualization & storage (VCP / VCAP-DCA)

  VMware instructor (VCI)