Workstation 8 vmware-workstation-server works not not on Ubuntu 11.10

Similar Questions

• Test Local PHP Server works not!

  Hi guys,.

  I just set up my server to test local PHP, even if its does not work properly! If you could help that would be so wonderful!

  Here are my current settings:

  The local Site folder: C:\XAMPP\htdocs\valsoo\

  Web URL: http://localhost/valsoo/

  Folder on the server: C:\XAMPP\htdocs\valsoo\

  Local/network

  Server model: PHP MySQL

  I'm testing the "local testing server" with a file called site_check.php, who works at the root of the folder of the Site Local (C:\XAMPP\htdocs\valsoo\site_check.php), but does not work when the file is within records (C:\XAMPP\htdocs\valsoo\lesson01). Not all the files of work either at the root. ANY SUGGESTIONS?

  Thank you very much!

  Brentis wrote:

  I deleted the C:/htdocs, but it changed nothing.

  That does not surprise me. If you have difficulty with the files could not be found, simply remove a folder will not help. You might have deleted the record sought by the browser.

  Assuming that XAMPP is installed, make sure that Apache is running and then type http://localhost in the address bar of browser to load the XAMPP admin page. Click on the link of the phpinfo() function in the left navigation sidebar and find the value of DOCUMENT_ROOT in the section Apache environment.

  Once you know the correct location for DOCUMENT_ROOT, you should be able to put your files in a subfolder of the DOCUMENT_ROOT folder and define your test server correctly in Dreamweaver.

• RV082 with QuickVPN can connect to the Windows Server but not on Ubuntu Server

  We have a RV082 and are capable of using QuickVPN to connect and access our work LAN (192.168.0.0) except that we can not connect to a Linux Ubuntu Server on the local network.  Can ping (and shared access) servers Novell, a Windows 2003 server and several printers but not the linux server.

  192.168.0.1 Novell server can ping

  192.168.0.2 Server Linux ping or you connect

  192.168.0.3 Windows 2003 server can ping and connect

  192.168.0.4 - 11 different printers that I can ping and install

  I can ping and connect to the server using PPTP-Linux

  Troubleshooting tips will be greatly appreciated

  Good afternoon

  Review of your question, it would seem at first glance that the Ubuntu Server may be blocking incoming VPN traffic. I'm not sure of what firewall program you have chosen to use with your server Ubuntu, but make sure the ports 500, 4500, 443 and 60443 are open to traffic entering this subnet. If you can detect all the errors showing blocked traffic trying to hit the server, which can be useful in allowing us to determine why this traffic does not go through.

  Thank you

  -Lindsey

• Solution for microphone that works not under Ubuntu 11.10

  After struggling with an inactive microfone after upgrade to Ubuntu 11.10, I found the solution on https://wiki.archlinux.org/index.php/Skype:

  Turn to PulseAudio autospawn off, normally: $ echo "autospawn = no" > ~/.pulse/client.conf
  
  Kill PulseAudio: $ killall pulseaudio
  
  Stop and restart Skype

  After this procedure, I could choose my microfone in the audio settings and it works fine now.

  I hope this helps!

  I could get my mic works on my laptop HP G7000 by simply making adjustments to the levels in alsamixer. Just open up Terminal and type "alsamixer" (without the quotes) and use the arrow keys on your keyboard to make adjustments to the mic settings.

• Failed to start service "VMware VirtualCenter Server" version 5.5 on windows 2008 r2

  Hello

  If I want to start the VMware VirtualCenter server on my windows 2008 r2 service I get the following error in the windows event logs:

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  
  

  The following information has been saved with the event:

  
  

  Could not initialize the VMware VirtualCenter. Closing...

  
  

  My vcenter Server version is 5.5.0.42389

  
  

  the "VMware vCenter Inventory Service" is running, the other «VMware vCenter...» "service are not running.

  
  

  If I want to fix the vCenter via programs and features, I only get the warning, my system is not in a domain.

  
  

  There are all the other newspapers that I can get the question?
  Maybe any help?

  
  

  I can't say since when vCenter does not work, perhaps because any Windows Update has been installed, but then I have to find anything through google I guess...

  
  

  grateful for any help

  Martin
  

  I just edit the vpxd.conf located in C:\ProgramData\VMware\VMware VirtualCenter\

  Of

  true

  TO

  fake

  the vCenter Server started my windows 2008r2 service after that, but I guess that I am not able to upgrade to vCenter 6.0 when PASS-THROUGH authentication is disabled

• The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  I tried all listed in other postings, but our VSphere 4 server resides on a SQL server server.

  I tested the connection odbc with the SA password and it works, it rebooted several times now, tried to stop all services and bringing up one at a time, but whenever a dependency is not. I get this error in the system log, the VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  And

  VMware VirtualCenter Management Web Services service depends on the VMware VirtualCenter Server service which failed to start because of the following error:

  The service has returned a service-specific error code.

  Application log says this

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  I don't know how to fix it. It was working fine yesterday. Nothing has changed. Or has anyone experience this problem and have a solution?

  see if that helps

  http://KB.VMware.com/kb/1015101

• Core i7 - both vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 basic

  The vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 Basic.

  Windows (pre install UI) error code install (0xc000035a) that the processor does not support X 64 Mode

  Any of that with core i7 system any help would be much appreciated, thanks

  -Software VMware Server 2.0.0 122956 - OR - VMware Workstation 6.5.1 126130 - OR- Microsoft Hyper V

  -Tried - BONE at BASE of MATERIAL AND the VM ENVIRONMENT

  X 64 Windows Server 2008 6001 - OR - X 64 Windows Server 2008 6002 - OR - X 64 Server Windows 7 6801

  System - Core i7 920 + X 58 (GA-EX58-UD5) + 6 GB DDR3 + OCZ SSD

  Intel Core i7 920 Webpage - http://www.intel.com/products/processor_number/chart/corei7.htm

  Gigabyte GA-EX58-UD5 - latest version of the Bios F3

  Web page - http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard & ProductID = 2958 & ProductName = GA-EX58-UD5

  Advanced features of MB Bios CPU - tried Both ON and OFF

  Hyper Threading - Threading 4 AND 8

  Intel Virtualization - ENABLE AND DISABLE

  Looked in the VM Bios as well

  6 GB DDR3 3X2GB 1600

  Please, see troubleshooting problems of Intel VT - x.

  Also note that you can not the role Hyper-V installed in the parent partition, if you want to run the VMware using VT products, as Hyper-V virtualizes the parent partition, but it only virtualizes the VT CPU features.

• VMware Workstation 9: could not open/dev/vmmon: no such file or directory

  I'll have a plethora of problems installing and get VMware Workstation 9 (9.0.2 build-1031769) to work on Ubuntu 13.04 (kernel 3.8.0 - 26-generic).

  I experienced exactly the same process on my laptop and it works perfectly, while on the desktop, it seems that everything breaks. Could someone give me some kind of help / advice on how I can do to get this working. I tried full uninstall / reinstall of the software, headers of the kernel, kernel images, different kernels, patches here on fresh installs of everything I can think of. Here are the issues I encounter in the order of importance (or so I think):

  (1) whenever I try to open my new (and virtual) machine, I get the error sequence of:

  "Could not open/dev/vmmon: no such file or directory. " Please make sure that the "vmmon" kernel module is loaded. '--> 'Failed to initialize the device monitor. "->" cannot change the power state of VM: could not find a valid peer to connect to '

  
  

  (2) every time I try to run the following command to configure the modules on a completely fresh setting (reinstalled kernel, vmware) I get the following output:

  sudo modconfig vmware - console - install-all

  Stopping VMware services:

  Demon of authentication makes VMware

  VM communication interface socket family is

  Virtual machine communication interface is

  Virtual machine monitor makes

  File system is blocking

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmmon-only '.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/driverLog.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/hostif.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/apic.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/comport.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/cpuid.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/hashFunc.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/memtrack.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/phystrack.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/task.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/vmx86.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/vmcore/moduleloop.o

  LD [M] /tmp/modconfig-G9S0TM/vmmon-only/vmmon.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmmon-only/vmmon.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  CP f vmmon.ko. /... vmmon.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  Using 2.6.x kernel build system.

  make: entering directory ' / tmp/modconfig-G9S0TM/vmnet-only»

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/hub.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/userif.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/netif.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/bridge.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/filter.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/procfs.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/smac_compat.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/smac.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/vnetEvent.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/vnetUserListener.o

  LD [M] /tmp/modconfig-G9S0TM/vmnet-only/vmnet.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmnet-only/vmnet.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  CP f vmnet.ko. /... vmnet.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmblock-only.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/block.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/control.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/dentry.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/file.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/filesystem.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/inode.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/stubs.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/module.o

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c: in function 'ExecuteBlockOp ':

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c:285: warning: assignment of incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c:296: warning: passing argument 1 of the "putname" incompatible pointer type

  include/Linux/FS.h:2052: Note: expected ' struct filename *' but argument is of type ' char *'

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/super.o

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/inode.c:49: warning: initialization from incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:38: warning: initialization from incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c: in function 'DentryOpRevalidate ':

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:104: warning: argument passing 2 of 'actualDentry-> d_op-> d_revalidate' makes whole pointer without a cast

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:104: Note: expected 'unsigned int' but argument is of type ' struct nameidata *'

  LD [M] /tmp/modconfig-G9S0TM/vmblock-only/vmblock.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  Warning: "putname" [/ tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmblock-only/vmblock.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  CP f vmblock.ko. /... vmblock.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmci-only.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/linux/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/linux/vmciKernelIf.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciContext.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDatagram.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDoorbell.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDriver.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciHashtable.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciEvent.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciQPair.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciQueuePair.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciResource.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciRoute.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/driverLog.o

  LD [M] /tmp/modconfig-G9S0TM/vmci-only/vmci.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmci-only/vmci.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmci-only/vmci.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmci-only/vmci.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmci-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmci-only.

  CP f vmci.ko. /... VMCI.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmci-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vsock-only '.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/af_vsock.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/notify.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/notifyQState.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/stats.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/util.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/vsockAddr.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/driverLog.o

  LD [M] /tmp/modconfig-G9S0TM/vsock-only/vsock.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vsock-only/vsock.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vsock-only/vsock.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vsock-only/vsock.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  CP f vsock.ko. /... vsock.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  Starting VMware services:

  Virtual machine monitor failed

  Virtual machine communication interface failed

  Family of VM communication interface socket failed

  File system is blocking

  Virtual Ethernet failed

  Demon of authentication makes VMware

  Cannot start the services

  (3) I often get the Ubuntu "this program has planted" messages on "/ usr/lib/vmware-installer/2.1.0/vmis-launcher" "' (this message of crash always occurs when you run the"vmware-modconfig"above command on a new installation.

  (4) at different times during Assembly and have VMware workstation on my system I get Ubuntu hangs on "/ usr/lib/vmware/bin/appLoader" and even "/ bin/su" (especially when you are trying to install - su NEVER blocks anywhere else).

  Thoughts / ideas on what is happening on earth / what could have caused this all go so downhill / how to go about fixing?

  Thank you

  Solved.

  The problem is that for another program I used gcc - 4. 4 instead of later. Restore the (by update-alternatives - config ) for gcc, g ++ and CPC - bin.

  Not a very graceful exit to have a version not valid I would say, maybe some sort of basic check could be added to ensure that the correct versions are present?

• Here is a list of the driver updates that do not install for one reason or another: Intel Desktop/Workstation/Server Express Chipset SATAAHCI controller your driver is out of date.

  Here is a list of the driver updates that do not install for one reason or another:

  Intel Desktop/Workstation/Server Express Chipset SATAAHCI controller

  Your driver is out of date.

  The installed driver date 30/05/2012

  New driver Date 18/09/2012

  After the next driver update > the following message appears:

  This driver downloaded successfully.

  You want to install it now?

  Yes. Then was the following result:

  Please update your Windows update Agent version.

  You can download the latest version by clicking here.

  If the Microsoft FixIt solution above does not solve your problem.

  Check on the Intel site.

  For example: http://www.intel.com/p/en_US/support/detect

• VMWare Update Manager Server does not work after changing name of host/IP

  I have Virtual Center 2.5 update 4 and Manager Update on two separate servers.

  I had to rename and change the IP of the Server Manager to update, and now the Server Update Manager does not work.

  Here are two mistakes that I get, when you try to activate the plugin Update Manager:

  "The server took too long to respond" or "VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  That's what I did to change the host name:

  -J' uninstalled virtual UpdateManager 1.0 Clients Center customer.

  -I stopped the Service VMware Update Manager on the update server

  -J' I renamed the update server changed its IP address and the host name and then rebooted the server (without starting the VMware Update Manager Service)

  -J' changed the value of the fields

  dbo. VPX_EXT_CLIENT. URL

  dbo. VPX_EXT_SERVER.UR

  -in the vCenter (on the vCenter server) database reflecting the new name of the server (the new hostnameis to pings to the vCenter server)

  -J' restarted the vCenter Server

  -J' started the Service VMware Update Manager on the update server

  -J' installed the client plugin update manager Virtual Infrastructure client

  -J' have TRIED to activate the plugin, but I got a warning about an untrusted certificate (I guess it happened also when I installed the client for the first time, and everything worked) and then I got two errors:

  sometimes "the server has taken too much time to react" and a few other times "the VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  I think that there are a few other references to the host name of the Update Manager, which I have not changed, on the vCenter server or Manager Update server...

  Does anyone have an idea what do I do?

  Thank you in advance.

  I would try just reinstalling the update on existing installation manager.  Do not overwrite the database in the process so that you shouldn't really lose anything.  Not the plugin, but since the Update Manager vCenter installation media.

  Give that a try and let us know how it goes.

• Can not activate sharing / "unable to configure the workstation server.

  Everything was going well until I made the mistake of upgrading to 12.1.1 build-3770994 12.0 (?)

  For some reason any sharing became disabled after upgrade.

  I can't activate the sharing, I get "unable to configure the workstation server.

  Seems every time I've upgraded to VMWare Workstation, something breaks

  I had to moce the VMs shared virtual machines 'normal' so I could run them.

  I fixed it, uninstalled and reinstalled and still the same failure.

  I took a look at the downloaded files and datastores.xml is empty, which is a little weird.

  Hostd.log, he crashed during the analysis of the datastores.xml file:

  2016-05-26 T 10: 11:07.572 - 07:00 verbose spend [08848] [sub Originator@6876 = Hostsvc] StorageNativeProvider: inventory filepath is C:\ProgramData\VMware\hostd\datastores.xml

  2016-05-26 T 10: 11:07.573 - 07:00 panic pass [08848] [Originator@6876 sub = default] error: class Vmacore::Xml:XMLParseException(not_well-formed_(invalid_token))

  2016-05-26 T 10: 11:07.580 - 07:00 panic pass [08848] [sub Originator@6876 = Default] backtrace:

  You may try to remove the config files during uninstall Workstation, and then reinstall the workstation.

• The virtual DHCP server does not work why?

  Hello

  I used the workstation to create a virtual machine with NAT connection. The virtual machine works well in my computer with WiFi, and it can get an IP address from the virtual DHCP server successfully. Then I copied it on another computer with no network connection (no wifi, no cable connection). After startup, the virtual machine cannot obtain an IP address from the DHCP server. In my opinion, if she has a physical or network connection, the DHCP server should work anywhere. I wonder why the server may not work.

  Also, is there any document to introduce inside the vmware network. Thank you!

  Yes, NAT is the network setting that allow you to generate ip which is pre defined in the virtual network Editor. and your virtual machine will also communicate to the outside network.

  On the contrary if you change host Only.The vm will get the ip address range but they will communicate within your host not the outside world. If no internet connection then. (No network connectivity don't require in this case)

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• HP workstation xw4100 does not start - flashes 3 times

  Hello

  My HP workstation xw4100 worked well.

  I removed the cover and removed all the dust with a vacuum cleaner.

  I placed the cover and tried to boot my pc.

  It is unbootable.

  The led flashes red 3 times, stops and blinks red 3 times again.

  The pc is no sound signal.

  Can anyone solve this problem?

  Thank you!

  Remove and reinstall the PROCESSOR unit to solve the problem

  If this does not resolve the problem, we need to replace the defective PROCESSOR unit

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• VMWare Virtual Center Server does not start after Windows Update

  Help!  I'm under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

  Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  and error 1000 in the Windows application log:

  Could not initialize the VMware VirtualCenter. Closing...

  PS - I confirmed that the SQL instance is running.

  Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a "space" condition, but there are a lot of available space.

  I have attached the file vpxd.log, he created.

  Clues?

  Thank you.

  OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.