Impossible to activate wireless lan on NB200 using the Fn + F8 combination

Similar Questions

• Re: Satellite L650 - impossible to activate wireless LAN

  I just bought a new Toshiba Satellite L650. I installed all the readers (video, sound, lan, WLAN...) but I can't turn on the wireless network. Practically, Fn + F8 does nothing.

  What can I do to activate it? Is there another way?

  Hi longip,.

  Wireless network adapter is listed correctly in the Device Manager? It may not be installed or with yellow exclamation marks so the driver must be reinstalled.

  For the FN key combinations, Toshiba Value added Package must be installed and Flash cards Support utility.
  You have installed these tools?

• Automatically use the wired on wireless LAN connection when using the docking station

  Hey guys!

  I use the my T500 with the Advanced Mini Dock @TheDude recommended in this thread: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-Recommended-Compatible-Docking-Station...

  I had almost a month now, and whenever I anchor my laptop I have to pass the connection wireless switch off hard or using FN + F5 and extinguish this particular radio.

  Is it possible to have the computer automatically choose the wired connection when it is available, otherwise use the wireless radio?

  I use Windows 7 Prof 64 bit.

  Thank you

  c1p0

  ThinkVantage Access Connections (AC) can be configured to do this. Change your location profile and change the order of the adapter associated with this place, for example, order first as Wired and Wireless second.

  When I am connected Wired and I pull the Ethernet cable, AC will switch to using wireless automatically. When I put the Ethernet back in, it starts automatically by using the wired and wireless don't report limited or no connectivity (which means that the switch has occurred). You will have to perhaps set up wireless in AC power options, i.e. disable radio when not in use (I did not sentence again).

  This could be similar to a docking station solution. Mine is without docking station; When I'm at the office and go to a meeting, I pull the wire and have continuity.

  Ideally, the CA should provide a solution. But it may take some fiddling.

• Re: Satellite L450D-128 - cannot activate wireless LAN

  Hello

  This laptop specific doesn't have a wireless to turn on/off switch. I can't seem to be able to locate the "wireless" on the Control Panel, in order to enable it.

  Help, please!

  Hi lil_red_rose,

  The laptop doesn't have a WIFI hardware switch, but you can use the combination of keys FN + F8 to disable/enable the feature WLAN.

  Also if the wireless network adapter is not recognized, press the key combination mentioned above to activate the wireless network card.

  Check this box!

• Impossible to activate wireless on Satellite L450D - 11H

  Got a new Satellite L450D - 11H. Windows 7 preinstalled. Can not turn on wifi, Fn + F8 does not allow it. Any suggestions?

  Hello

  You can not activate because the FN buttons do not work with Win 7 until the pilot and the tool is not installed.

  I didn t find Win 7 driver currently on the European driver Toshiba page, but you can choose the drivers released for other Toshiba Satellite series.
  Try to install the VAP released for i.e A350, P300 series or other package.

  A friend of mine installed Win 7 on A500. Win 7 drivers are not available for this series, but he used the drivers for the A350 and most of the features and ok!

• Satellite L300-19Y - wireless LAN is not in the list of devices

  Hi I need to throw this one out there incase I throw my pc a bridge...

  I have a Toshiba Satellite L300-19Y which recently gubbed the HD, so I replaced and am trying to install XP SP3.

  However, even with what i belive to be the correct drivers I can't seem to access my wireless LAN.
  I installed most of the pilots involved, and have access to the Internet via the NIC with a connecting cable.
  It was a struggle to get even, even if I really need a wireless...

  At the moment the wireless device does not appear in the list of devices, although I can see my network card.
  I have some thoughts on how to activate the wireless, I tried to install the driver manually wireless but didn't get any wherever I get a code 10 XP Shutdown response.

  I've updated the BIOS, I have the latest drivers 8187b, I installed the kernel, the chipset, the display and audio drivers... etc.
  I installed a new copy of XP but you have not installed all the drivers until I know that the correct procedure...

  Any ideas would be appreciated...

  Arghh!

  Andy

  Hello

  You should try to activate the WLAN using the hardware on the laptop switch (must be defined on and with the combination of keys FN + F8.
  Did you do that?

  In addition, you can get all the drivers for your laptop on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I assume that you have installed your laptop with a disc of Microsoft, so you should try it with the Toshiba recovery disc. It contains an image of the settings from the factory with all the drivers and tools. After that, everything should work fine on your laptop.

  Check it!

• Unable to connect to the wireless network; Request to use the function keys and the keys on the keyboard

  * Original title: wireless connection problem

  I have an Inspiron computer (laptop).  I can't connect to my wireless Internet.  When troubleshooting it says use the buttons or the function keys on the front or side of the computer to turn on my wi - fi.  How to do that? How can I activate my wireless Internet connection?  Help, please!

  Hello

  Check with Dell support, their books online, the drivers/firmware, diagnostics and ask in their forums known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• LAN address MAC using the windows API?

  I would like to read the MAC address of the LAN to my WIFI on my PC card.

  Apparently, this can be done using the Windows API

  Anyone tried something like this again?

  Thank you

  Hi morngoose,

  You can use the function "exec system" with "cmd/c" ipconfig/all "" "connected." Parse the string and you'll get your MAC address.

  Mike

• Impossible to scan: "another program or computer using the HP imaging device.

  Original title: hp scanning problem

  I can't seem to find anything on the hp site regarding my being not scan with the center of Solution because that 'another program or computer use the HP imaging device ".  I have my Officejet 6500 connected via an ethernet cable in my Linksys routeras is my internet modem.  Someone has an idea?  I can print fine; I can't scanner to work other than the program with the paint.  Thank you for coming so someone can help out me.  -Steve M

  Hello

  I suggest you to visit the following links: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Networked-C6280-and-Windows-7-64-bit/td-p/217282

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Windows-7-Professional-and-HP-printer-software/TD-p/224258

  I hope this information is useful.

• Impossible to activate wireless

  This morning the without wire came out on my router and I cannot turn it back on. When I go on the base page is this wireless off and a yellow warning on the parameter sign, see attachment. I have reset the router, you press the physical buttons several times and it enabled in the settings, I'll get the peds for wireless, 2.5 and 5 ghz radio - but it always shows off. Customer service have sent simple here to check help from front window of support for 90 days.

  

  The second right LED on top is actually a button that turns off the wireless. If you pressed for 5 seconds, it allows to disable wireless on the device and will show it off in the GUI, but there is no way to reactivate. To reactivate it, hold down the button again for 5 seconds, the lights for the wireless on the left will be light when he's back on.
  I was cleaning yesterday and moved the router behind my TV, and the TV was resting just above this one. I used it every day, but at some point apparently moved enough TV to push the button... Kind of weird that there is no entry in the log when it is pushed, too.

• Wireless LAN does not receive the signal from the router

  Yesterday, I bought a toshiba satellite pro L10 and it's got wireless, but for some reason some can't find any network even when I'm in the same room as the router. What can I do?

  Hello

  Well. First of all, check if the wireless antenna is turned on. Check the switch on the side. In addition, with the FN + F8 key combination, you can switch between the Bluetooth card and wireless.
  In the next step you should check the wireless network connection properties
  The option use Windows to configure my wireless network must be marked.

  Good luck

  Good bye

• Impossible to duplicate to external hard drive using the CCC

  Hi all

  I wanted to make a clone of my HD, because it started acting weird lately and decided not to make a clone of it when I get a new HD, but when I use ccc I select my boot drive (the one doubtful), then my drive external usb (2 TB) as my destination and copy everything BUT after 4 hours no progress but 4 points work but nothing is transferred. I formatted the external hard drive as it should be set to format less 10.8 in disk utility. So what I'm doing wrong here? Is there an easy way to do it? I think that I have V. 3.5 ccc, y at - it a bug with this version? BTW, my external hard drive is a USB 3 but compatible for 2 and my mac has no problem reading and writing to it. Any help with this or other means or programs to clone my drive is welcome.

  Thank you!!!

  Have you checked for an update of the CCC?

  Have you considered Time machine? You can restore from that.

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

  Try using disk/restore to copy the data to a new location. Please note that this will reformat the destination partition.

• HP 7520: HP 7520 - impossible to activate Web Services - tried all of the solutions only in the last forums

  There are so many messages on this error dating yeas.  I tried all.  He used to work without any problems.  I tried the changes DNS 8.8.8.8 and 8.8.4.4, I reset my routers hundred times.  I entered my IP address in my browser and tried in this way.  No matter what I tried my Services Web will not work.  I have reset the factory settings and reinstalled the software on my computer to make sure that what was allowed.  Any other tips or thoughts?  Y at - it a proxy address that I can try?

  Hello

  From your PC, download and install the latest firmware below:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462/swItemId/OJ-113641-5

  Once done, restart your printer and try to access Web Services, tht sould restore its functionality.

  Kind regards

  Shlomi

• the value 600 d/T3i for firing the shot with a wireless remote control without using the timer involved?

  A 600 d/T3i is adjustable to shoot with a remote wireless without the timer is involved? I was not able to find a way yet.

  Yes. Your remote control has a switch on the bottom it is shoot immediately, or with a 2 second delay sets. I guess that yours will be set to position 2. It must be set to 0. Problem solved. Best regards, col.

• Impossible to back up my system and use the system restore feature

  I installed 10 Windows and a few days later did a system restore and it was deleted.   I'm able to use Windows 7 now, but I'm unable to save or run the restore of the system at all.

  I get error code 0 x 80041321.

  How can I get this done?  I tried and tried.

  Please restart your computer, wait 30 minutes for the system to operate before downloading more information so that the impact of the changes can become apparent.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm