Unable to choose which account to connect with mail, calendar, people, and messaging applications.

Similar Questions

• I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  Hello

  Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

• When I start the computer began logging directly to my account rather than offer the choice of which account to connect to

  I have two users put in place. When I start the computer began logging directly to my account rather than offer the choice of which account to connect to

  Hello GEOFFMUGGLETON,

  This thread has been created in the discussion forum. and performance of Windows Vista Microsoft moderation team has moved this thread to the security, privacy and user accounts Forum.

• How can I fix the account recovery message which goes looping every time I have use the mail, calendar & people & store apps?

  Has initiated the change security info on my account as I can no longer access alternate e-mail address.

  On my PC, an account recovery message whenever I have use mail, calendar & people applications asking if it was me who requested the change.  Continue looping the same question.

  Synchronization between devices has stopped, so I tried to fix by uninstalling apps so that I could reinstall but have found I have the same problem with the app Store's Windows.

  Not having is not the same problem on other devices.

  Hello

  Even when you choose to modify or delete information more up-to-date security, we don't entirely remove it for 30 days. This waiting period allows to deter pirates update your security information and access your account without your knowledge. But the waiting period does not mean that you are locked in your Microsoft account. That's why you get the message that appears.

  If you need assistance please submit a new private support request on this link and select the category that applies to your question.

  I hope this helps. Let us know if you need help about the problem with Windows.

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• Vshphere Client 5.1 can't connect with esxi 5.0 and earlier

  Hello

  I am facing a strange behavior I me client Vsphere updated 5.1 but now it is impossible to connect with esxi 5.0 and older versions. When I try to connect to an earlier version of esxi it show me update popup but unfortunately on this machine I can't connect to the Internet ihave manually download a patch?

  Talha Correia

  Hello

  You must download and install the client on your computer.

  You can find in the download section of the website of VMware vSphere.

  It comes to 5.0

  https://my.VMware.com/Web/VMware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere/5_0

  Francesco

• script which gives the hostname with more CPU resources and memory available

  Hello

  Anyone have a script which gives the hostname with more CPU resources and memory available in the cluster?

  Concerning

  Vickie

  Hello, VicMware-

  You can get the host with the free CPU, or with the most free memory resources, using the following:

  ## get the host with the most free CPU cyclesGet-Cluster myCluster0 | Get-VMHost | Select-Object Name,    @{n="CpuMhzFree"; e={$_.CpuTotalMhz - $_.CpuUsageMhz}} | Sort-Object -Property CpuMhzFree -Descending | Select -First 1
  
  ## get the host with the most free memoryGet-Cluster myCluster0 | Get-VMHost | Select-Object Name,    @{n="MemGBFree"; e={$_.MemoryTotalGB - $_.MemoryUsageGB}} | Sort-Object -Property MemGBFree -Descending | Select -First 1
  

  The first would have produced something like:

  Name          CpuMhzFree
  ----          ----------
  myVMHost0          25384
  

  And the latter didn't would be out:

  Name           MemGBFree
  ----           ---------
  myVMHost4        122.323
  

  .. .or each of these host computers are those with the most free memory/CPU cluster, respectively.  What to do the things for which you are looking?

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get o

  Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get it on my computer saved?

  If your two activation is used, you need to call Adobe. Install CS3 point of activation and call Adobe at this time here.  They help in cases like your My drive crashed and I replaced it. Could not disable the activation of the accident.  I've done that twice in the years I use PS for about 20 years

  To see your key, you must click on the product in your products and services Adobe page.

• When I connect Yahoo mail, I get a message "of the Web page" that says "out of memory online: 1".»

  Message from Web page blocks the mailbox.

  When I connect Yahoo mail, I get a message "of the Web page" that says "out of memory online: 1".» How can I get rid of him?

  First I would try the cleaning of your story/temp IE files
  -> Tools-> Internet Options click on the browser history under delete-> check all box, and then select 'delete '.
  Restart the browser and see if you are able to connect to Yahoo mail

  If this is not the case, try this:
  http://support.Microsoft.com/kb/126962

• my computer is the connection with a temporary profile and I can't access some files how to fix this?

  my computer is the signature with a temporary profile and I can't access any of my files how to fix this?

  Hello

  Please post in the forums for your version of Windows.

  Ask a question in a select Technical Forum here appropriate injector:

  Microsoft Community - Forums
  http://answers.Microsoft.com/en-us

  Please provide all the information we need to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  =================================

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.
  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in
  Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 - free methods system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty to a Vista - corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Difficulty to a corrupt user - Windows 7 profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Apple e-mail account iCloud fails with correct correct username and password

  A new e-mail account was created in Thunderbird to connect to an e-mail account on Apple iCloud
  The incoming and outgoing server names were obtained from Apple and Thunderbird could check the servers but comes back with the username incorrect error or password when you complete the e-mail account. . Apple says that it is a problem of Thunderbird. Any suggestions on changing the configuration to work with the iCloud email account. This email account is functional with an iphone 5

  I found an answer to work here:

  https://discussions.Apple.com/thread/3880703

  Greetings
  F

• Printer HP Photosmart more B210 loses the wireless connection. with MAC 10.6 and Linksys router.

  From time to time my printer HP PSt + B210 indicates not 'online' in the window of the printer utility and do not print.

  I have spend hours to review what I did in th past and become confused.

  Should I start with the HP utility and make sure that my printer is listed only once in the queue (as is sometimes show 2 forms - for the same printer) OR should I stop MAC PB > router > Modem and then restart in correct, reverse order?

  Given that I need to choose "IP automatically...". ", I used Safari and put the 192.168.1.1 in the address bar and follow these steps, as already suggested.  What would be the clear measures to reconnect my HP printer status online? Thank you very much!!

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• Internet connection with Windows XP, SP3 and Airport Extreme - the status is always "absorbing network address.

  My Airport Extreme connected my IMac immediately, but I am not able to connect on the side PC. Airport utility does not 'no matter what Airport wireless devices". When you check the status of the internet connection with PC tools, the correct network is indicated and shows an excellent signal strength. The status is: "absorbing the network address. However, nothing happens.

  Under 'Repair the wireless network connection', it shows, "Windows is taking the following steps: your IP address renewal" even once, nothing happens.

  Under hardware I show Atheros Wireless Network Adapter and the mention: "this device works correctly.

  Yet, no network connection. Any help will be greatly appreciated.

  Hello

  Keep the changes and open the wireless. For example, to disable security in the router (turn on when to managed to connect).

  You can also try the wireless in a friends house, or an Internet café to get a frame of reference for this behavior elsewhere.

  -------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled).

  If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• JAVA + connection with a database created on Oracle Application Express

  Hello

  I have a database created on Oracle Application Express (free version), and I have to connect to this database in a java application (made on Eclipse) for a college job. Is this possible? If it is, can you show me how to do this?

  Thank you!

  9227e5f8-f6e0-4822-8e9b-5dbb1f227a26 wrote:

  I have a database created on Oracle Application Express (free version), and I have to connect to this database in a java application (made on Eclipse) for a college job. Is this possible? If it is, can you show me how to do this?

  Databases are not "created on Oracle Application Express". Request Express is a component of a pre-existing database.

  What do you mean by 'Oracle Application Express (free version)'? If it comes to a workspace on the hosted apex.oracle.com, then it is possible to connect using the APEX in a web browser. If you mean a local installation of Oracle Express Edition, then Yes, a Java application can connect to it, but the issue is off-topic for this forum and should ask in the forum Database Oracle Express Edition (XE) .