Unable to connect server connection to the composer

Similar Questions

• [RESOLVED by itself] Firefox Sync: unable to connect to the server for 12 hours now

  New installation of Windows 7 64 bit
  New installation of Firefox 28

  Is my sync configuration, enter the user, pass & recovery key.
  It hangs on the audit for more than five minutes.

  Then displays error: unable to connect to the server
  See the screenshots: http://i.gyazo.com/0d19d680eae937fa27ace5df59caaa5d.png

  This happened during the last 12 hours.

  The State of the system (https://services.mozilla.com/status) Says:
  "The Firefox Sync service is running normally.
  There is no known issues at this time. '

  I tried to disable the firewall and I use MS Security Essentials.

  Please advise?
  Thank you.

  This issue is resolved itself today.

• Unable to connect to the servers of SnapChat. IOS 4.2.1. iPhone 3G. Error message: unable to connect to the server. Please try again later.

  Hello

  I can not connect to servers SnapChat

  IOS 4.2.1

  iPhone 3G

  Error message:

  Unable to connect to the server. Please try again later

  Thank you for your time and understanding.

  Hello!

  It seems that you can not use your SnapChat the way app which you should be. I would use the troubleshooting steps in the following article for third-party applications. You may well reach out to the developer if the problem is not solved by the article though:

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Thank you for using communities of Apple Support.

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• HP Envy Notebook dv6: unable to connect to the proxy server

  I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

  HR63 wrote:
  

  Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

  I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

  http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

  How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

  This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
  Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
  STEP 1: restore the default proxy to your machine settings
  STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
  STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
  STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
  STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
  (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

  http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

  It is with IE

  Step 1 - launch Internet Explorer

  Step 2 - Click the icon "but" it looks like a gear wheel...

  Step 3 - select 'Internet Options '.

  Step 4 - Select the 'connection '.

  Step 5 - Click Lan settings

  Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

  Step 7 - click 'Ok' to save the changes

  If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

  Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.

• 'Unable to connect to the server' after updating to iOS 9.3

  After updating my iPhone 6 more for iOS 9.3 I get the message "unable to connect to the server. I can't connect to iCloud more!

  It's your phone antivirus. If you have an application like 'disconnect' you must remove it and then you can connect and reinstall.

• "Unable to connect to the Skype server" error on samsung wave 723

  I got Skype Lite (or the Java thing, whatever we call it - does not allow calls - only CAT) on my Samsung Wave 723 for more than six months. Earlier this week he suddenly disconnected me and when I tried to log in again it showed this error "Unable to connect to the server of Skype." almost immediately after, I started signing in. I tried to reset the settings in Skype, my phone settings, I took out the battery and reset even WiFi. Then I tried to connect with a few other WiFis - still the same error. My friend has the same version of Skype Lite on his cell phone, and it works very well and without errors.

  Anyone know how to fix this error? It is urgent, please.

  Solved the problem on my phone. I just had to add the area code to my phone number in the connection menu.

  @yousef8824: I downloaded my Skype Java one of those ages of links it is a. not useful at this time.

• Unable to connect to the Skype server!

  Always write can not connect to the Skype server. just like others. I use version 4.2 without problems, but about 1 week ago can't connect on Skype. Always write this message and try after 2 minutes later. Doesn't work, I try to download the latest version and at the end of installation even message, unable to connect to the Skype server. No problem with our PC

  Interestingly, I can't go to my Skype account with login Skype from my Windows Phone (Nokia Lumia 630).

  Conclusion is any problem with your server and connection PC, dosnt matter version of Skype. Please fix. I hope in a short time. Thank you

  Best regards y):

  

  having exactly the same problem on my Mac when I try to connect it just gives me that a message could not connect to the server. Can go to my ipad, same account etc, but not on the desktop. Anyideas? I tried to download latest version, but that does not help

• Unable to connect to the server

  I have an officejet pro 8600plus. When I bought it, I have activated ePrint and registered my printer, but never used the feature. Since then, I updated from XP to windows 8.1, changed a router and connected the printer through a series of switches on a wired ethernet connection. A few days ago, I tried to use e print but received a message that I couldn't connect to the server.

  my printer prints fine, connects to each computer on my home network, I just upgraded the firmware with success to [personal information deleted]
  and yet, for more than three days, unable to connect to the server. I even deleted my account eprint printer, after changing his email successfully, but now I can not add new, I can't get the code because I can't activate the web plus services. I can scan from the printer to files network and all, but can't seem to activate eprint.

  can anyone help?

  Thank you

  Gill

  Hi the gills.

  Welcome to the HP Support forums.  I think since upgrade to 8.1 Windows and change your printer router cannot connect to web services to get the job of ePrint feature.

  Please define Manual of the printer an IP address manually and DNS servers. I've included a link to another post, I did it with the stages (including screenshots) how to do it.

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Unable to connect to the server appleid in el capitan?

  Whenever I try to connect to the App Store, iTunes Store or iCloud, I get an error message unable to connect to the server appleid. This all started as soon as the upgrade to El Capitan on my Macbook Pro, that is in late 2011 with 16 GB of ram and 1 TB of hard drive. It was working fine before the upgrade.

  If the firewall is enabled, please disable it in the component of security & confidentiality of system preferences. First of all, you need to unlock the settings by clicking on the padlock icon and entering your administrator password.

• How can I subscribe to nesgroups - get an error unable to connect to the server

  Attempted to subscribe to newsgroups, but get an error message - unable to connect to the server.  What I am doing wrong?

  msnews and msn newsservers and groups are gone.  There are a few free newsservers, such that news://nntp.aioe.org , but a pottery forum is empty.  There are also some newsservers that you can pay for.  You could try emailing somone who already contacted you in the other forums to see if they have suggestions and what they are doing in this regard.

  Steve

• Outlook Express: Unable to connect to the mail server! (error 0x800CCC90)

  original title: Outlook Express: unable to connect to the mail server!

  Im trying to get my outlook express to receive and send messages from my live.com account but it comes back with: the server responded with an error. Account: "Live.com', Protocol: POP3, server response:'-ERR AVG POP3 Proxy Server: cannot connect to the mail server!', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC90."

  Someone knows how to fix this? I tried to remove and add the account again using IMAP instead of POP3, but still get an error message, the e-mail address and the password are all correct and I think that ive got the right to Server (live.com?) Im not exactly computer so any help would be greatly appreciated.

  You will find the right settings for an account on this page live.com: send and receive Hotmail from an e-mail application. To change your settings, select Tools > accounts > {account} > properties and make right onto the tabs of servers and Advanced entries.

  [I moved your question on the forum just for Outlook Express issues.] You should not notice a difference].

  Noel

• After a virus attack, I am unable to connect to the server from any client computer.

  I have a small net work in my house, and until yesterday, the network works well. MSSE has cleaned up win32 virus attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. Infographic customer request user LRN & passwiord against which I entered the data from the server connection, but it displays the sdame error message. PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  original title: connection from the Client to the network problem

  Hello

  Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public Server on TechNet. Please post your question in the Windows Server Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/