Unable to connect to APEX after changing the IP address of the server

Similar Questions

• Unable to connect Adobe cloud after update the expiration date of credit card

  Unable to connect Adobe cloud after update the expiration date of credit card.

  The activation server show that CC has expired on 21 September, 2015. Please renew the subscription if possible or re-purchase.

  The best option will be to contact Adobe support for this.

  Concerning

  Stéphane

• Internet connection is slow after changing the MAC address

  * Original title: win7... problems with internet after changing the WIRELESS card MAC address

  I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

  Hello

  1. what made you want to change the MAC address?

  2. what exactly happens while you are trying to connect to the internet?

  3. you receive an error code or error message? If Yes, what is the full error message?

  4 have you checked the issue in internet explore as well?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Please try following the steps provided in the article and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, see the articles and check out them.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!

• Cannot connect to gmail after changing the password

  I changed my gmail password yesterday, but since he could not connect and a message appeared asking me to go to: https://support.google.com/mail/answer/78754

  I have already try to disconnected and connecte connected to my account gmail in Firefox, use the DisplayUnlockCaptcha and permit apps less secure access my mails. But none of this works.

  In case the problem was thank Thunderbird too often connected, I also gave it a night and I tried again this morning, but no luck. I can access my email in the web and app Android gmail, but not Thunderbird.

  Are there other solutions to this problem?

  I finally found the solution after the addition of another account in Thunderbird with the same email.

  My original account has been set to use the "Normal password" as authentication method, and it worked fine, until I changed the password.
  But after adding the new account, I noticed gmail utilisΘ 'OAuth2.

  Changing the "Normal Password" to 'OAuth2' in the server settings-> authentication method, fixed the problem.

• Unable to connect to Oracle UCM, but the server seems to work

  Hey everybody,

  So when I point my browser to my cms url, I get to the standard landing page the defaul 'comments' to the Home Page.

  When I click on the link to try and connect, I can't connect.

  I ran the IdcServer command and the server seems to be generating a log output. I also ran the idcserver_start command and the command idcadmin_start.

  Poth have process IDs. However, I am still unable to connect.

  All the world has never met a problem like that, or know the two fix/debugging better?

  Thank you!

  Hey guys,.

  I solved the problem. The apache server had stopped running, there's nothing listening on the port that is used to access our content server.

  Thank you all for helping me along

• Unable to connect to Weblogic and start the server short

  Hi all
  I just installed WLS, Oracle ADF and short 7.5.1 server. When I run the startWebLogic.sh, I was able to see the login page at localhoast:7001 but when I enter the identification information, keep the download page and in the end, I get a blank page. Can anyone help me to solve this issue. Here is the log of the server administrator.
  
  # < 10 April 2013 3:53:53 PM PDT > < Info > < security > < ascussdb1.localdomain > <>< ExecuteThread [ASSET]: '80' for queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1365634433855 > < BEA-000000 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
  # < 10 April 2013 3:53:54 PM PDT > < Info > < security > < ascussdb1.localdomain > <>< ExecuteThread [ASSET]: '80' for queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1365634434020 > < BEA-000000 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
  # < 10 April 2013 3:53:54 PM PDT > < Info > < WebLogicServer > < ascussdb1.localdomain > <>< ExecuteThread [ASSET]: '80' for queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1365634434574 > < BEA-000000 > < start WebLogic Server with OpenJDK 64 - Bit Version of VM 20, 0 - b11 Sun Microsystems Inc. Server >
  # < 10 April 2013 3:53:55 PM PDT > < Info > < management > < ascussdb1.localdomain > <>< ExecuteThread [ASSET]: '80' for queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1365634435384 > < BEA-000000 > < Version: WebLogic Server 10.3.6.0 Mar 15 Nov 08:52:36 PST 2011 1441050 >
  # < 10 April 2013 3:53:56 PM PDT > < opinion > < WebLogicServer > < ascussdb1.localdomain > <>< ExecuteThread [ASSET]: '80' for queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1365634436642 > < BEA-000000 > < server status changed initially >
  # < 10 April 2013 3:53:56 PM PDT > < Info > < WorkManager > < ascussdb1.localdomain > <>< ExecuteThread [ASSET]: '80' for queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1365634436656 > < BEA-000000 > < self-adjusting Initializing of thread pool >
  # < 10 April 2013 3:53:56 PM PDT > < Info > < WebLogicServer > < ascussdb1.localdomain > <>< ExecuteThread [ASSET]: '80' for queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1365634436782 > < BEA-000000 > < WebLogic Server "AdminServer" version:
  WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 Copyright (c) 1995, 2011, Oracle and/or its affiliates. All rights reserved. >
  # < 10 April 2013 3:53:56 PM PDT > < opinion > < Log Management > < ascussdb1.localdomain > <>< ExecuteThread [ASSET]: '80' for queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1365634436880 > < BEA-170019 > < server log file /home/oracle/EPM/Middleware/wlserver_10.3.6/user_projects/domains/endeca_domain/servers/AdminServer/logs/AdminServer.log is open. All events in the log server-side will be written to this file. >
  # < 10 April 2013 3:53:56 PM PDT > < Info > < Log Management > < ascussdb1.localdomain > <>< ExecuteThread [ASSET]: '80' for queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1365634436889 > < BEA-170023 > < logging of the server is initialized with the Java application logging API. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Diagnostics > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '80' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437002 > < BEA-320001 > < ServerDebug The service initialized successfully. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437115 > < BEA-002622 > < Protocol 't3' is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437116 > < BEA-002622 > < Protocol "t3s" is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437117 > < BEA-002622 > < the 'http' Protocol is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437117 > < BEA-002622 > < the "https" Protocol is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437118 > < BEA-002622 > < Protocol "iiop" is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437119 > < BEA-002622 > < Protocol 'iiops' is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437120 > < BEA-002622 > < "ldap" Protocol is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437121 > < BEA-002622 > < Protocol "ldaps" is now set up. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437127 > < BEA-002622 > < Protocol "cluster" is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437128 > < BEA-002622 > < Protocol 'clusters' is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437134 > < BEA-002622 > < the "SNMP" is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437134 > < BEA-002622 > < Protocol "admin" is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < Server > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '73' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437135 > < BEA-002624 > < administration Protocol is "t3s" and is now configured. >
  # < 10 April 2013 3:53:57 PM PDT > < Info > < RJVM > < ascussdb1.localdomain > < AdminServer > < ExecuteThread [ASSET]: '84' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1365634437165 > < BEA-000570 > < Configuration of the network for the channel "AdminServer.

  It seems that you have configured your domain WebLogic with a JDK unsupported (openjdk). Install a supported JDK and redeploy or reconfigure your domain name - JRockit JDK 1.6.0 latest is recommended for Production facilities, and you can also use Oracle (Sun) JDK 1.6.0 later.

  Brett

• Unable to connect to vcenter after change of firewall

  Try to solve my backups VM Explorer, by default, on a single host I enabled ports NFC ()) - 23, 1024-65000. It was not checked, so I checked and limited to a subnet that guests and almost all of the virtual machines are in. As soon as I put it, my vsphere client began to turn and gave me connection errors. So, I used a vpn to connect to a windows server in this subnet and IE to connect to the web client. I always get connection errors.

  Since all hosts and most of virtual machines, including vcenter, are in this subnet, why should I be cut off? I can ssh in this host, so is there a process I can kill?

  Thank you.

  Update:

  Not the port of the NFC. It was ports connector vm series, which included the ports incoming and outgoing used by our iscsi san and that's why everything went to hell. I should have allowed the rule but left everyone rather than define a subnet restriction. I managed to enter the host itself and reset the Firewall setting, then restarted vcenter. Everything nice fixed now. Waiting to hear if any data has been watered.

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.

• After changing the administrator password in windows server 2003, I can not connect the next day why?

  After changing the password in windows server 2003, when the new password take effect?

  Hello

  In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• Service does not start after change of IP address on the server of SRM

  Here is the log.  The IP address has been changed, but I don't know how to take the side of MRS.?

  Journal of VMware Site Recovery Manager, pid = 4064, version = version 1.0.1 build-128004 =, = release, section = 2 option

  Cannot create the writer console

  Value flush dir "C:\Documents and Settings\All Users\Application Data\VMware\VMware Site Recovery Manager\DumpFiles"

  The initialization of the DBManager

  Current working directory: C:\Program VMware Site Recovery Manager\bin

  TaskMax = 10, IoMin = 1, IoMax = 21

  Try DrExternalRecoveryApi

  Plugin path 0: dr-external-recovery - api dll

  Absolute path of the plugin 0: C:\Program VMware Site Recovery Manager\bin\dr-external-recovery-api.dll

  Try RecoverySecondary

  Plugin path 1: dr-secondary - recovery.dll

  Absolute path of the plugin 1: C:\Program VMware Site Recovery Manager\bin\dr-secondary-recovery.dll

  Try SanProvider

  Plugin path 2: dr - san - provider.dll

  Absolute path of the plugin 2: C:\Program VMware Site Recovery Manager\bin\dr-san-provider.dll

  Try TestProvider

  Plugin 3 path: dr-test - provider.dll

  Absolute path of the plugin 3: C:\Program VMware Site Recovery Manager\bin\dr-test-provider.dll

  DrExtApi Instance of Service is initialized.

  Plugin has started.

  'SanProvider' provider has MoRef 'dr.primary.SanReplicationProvider:PrimarySanProvider '.

  Registered provider 'SanProvider '.

  'SanProvider' provider has MoRef 'dr.secondary.SanReplicationProvider:SecondarySanProvider '.

  Registered provider 'SanProvider '.

  Plugin has started.

  ' Provider 'TestProvider' has MoRef ' Dr. PrimaryTestProvider:primary - test provider.

  Registered provider 'TestProvider '.

  ' Provider 'TestProvider' has MoRef ' Dr. SecondaryTestProvider:secondary - test provider.

  Registered provider 'TestProvider '.

  Plugin has started.

  LocalSite already installed - good!

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  VC connection: connection as the user "administrator."

  VC connection: logged in session F5EDC747-1344-4F98-82FB-038BB9D42933

  The specification of proxy for extension com.vmware.vcDr points to 172.20.0.168, not to this host

  Check with the local VC server is not valid

  Initialization of service content: unexpected exception 'class Vmacore::Exception' record with the local VC server is not valid

  Application error: check with local VC server is not valid. Closing...

  Unable to send the request. A new attempt. Error: class Vmacore::CanceledException (operation has been cancelled)

  VMware-Dr. service stopped

  Z OS

  I tried this on my own server and that you couldn't make it work.  I ended up just reinstall SRM, keeping the same database - NBD since most of the settings are there anyway.  Later, I came across a blog (which I can't find now) that said that VMware supports only a reinstall after changing the IP address.

• HP laserjet p1006: does not print after changing the toner

  I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

  Hi @cindycb,

  Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Make sure all the orange, packaging material is to remove the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Open and close the cover five times quickly. It should print a page with black lines on it.

  You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

  You use Genuine HP Toner?

  Please let me know the result and if there is anything else I can help you. Thank you.

• Speakers stopped working after changing the device sound card

  * Original title: switched to hi-speed of dial-up, speakers stopped working / / rev. #2 Can I change the title of: speakers stopped working after changing the device sound card

  I have a Motorola SM56 speakerphone modem, I went from dial-up to the Road Runner.   When I open Device Manager and expand the sound column it lists "High definition Audio Device" (manufacturer of Microsoft), there are 4 that say "NVIDIA High Definition Audio" then there is one that says "Unimodem Half-Duplex Audio Device.  When I open the properties of the Unimodem device it says ' device working properly. "

  Let me start at the top under "General".  It lists the name of the device: Unimodem half-duplex Audio device.    Device type: audio, video and game controllers;    Manufacturer: Microsoft;    Location: Motorola SM56 Speakerphone modem.

  My speakers worked very well before I went.   I tried updating the driver but he came back with "best driver already installed.  It is a desktop PC, it is about 6 years old, but has been revised, graphics card new, updated to power, new 4 GB ram I think.  The hard drive is 1 TB.   I'm running Windows 7 Pro.  I forgot to mention, if I open a WMV file and volume in the taskbar commands, I see the green light moving.  The green light on the actual speakers turned on, just no sound.  It seems to me that the old speakers do not like the new modem from Time Warner. (I'm an old lady, what the devil I know)

  It is a question of another driver, or is it something else?

  Any help would be greatly appreciated.

  Are plug you the speakers into the modem?

  They must be connected in making your computer speaker, usually a light green color (read the manual of the machine). Go to control panel / sounds / playback and make sure that the type of speakers you selected as the default device.
  Audio device drivers updated its better to not use MS Update (it is not). Re-post giving your machine make name and exact model number (for example HP, Inspiron, ABC1234 etc.).
  See you soon,.
  Jerry

• Windows 8 mail, Gmail error unable to connect. Make sure that the information you entered is correct

  I tried to set up a Gmail on windows mail 8 for some time. It worked before but then I had to re - install the app and I can't seem to log in now. The only difference between now and when it worked is that I had turned on google + once I had it working the first time, but now I have that turned off.

  I always get this error: unable to connect. Make sure that the information you entered is correct.
  If I have the chance and he fails to add account, then synchronization takes a long time and emails take 5-10 minutes to arrive on the application it does to get to my account in a web browser and on my phone.
  Many users complain about this, we really need a strong response here.

  Hi Martyr844_Coffe,

  Make sure that your google account manager has granted approval of this log - in...

  From there... https://myaccount.google.com/.

  And change the account setting Gmail on Mail app account like the following picture setting...

  (To find out the specific parameters of the account )
  

• After changing the port (1521 to 1525 in listener.ora and tnsnames.ora) OEM: the database is down

  Hello

  I'm installing Oracle Database 11 g 2 (11.2.0.4) on Oracle Linux 7.1.

  In short, what I'm trying to do now is changing the default port of 1521 to 1525.

  So I stopped the listener (lsnrctl stop) and then changed my listener.ora and tnsnames.ora:

  Listener.ora

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  BI =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = bi)

  )

  )

  And then changed the local_listener:

  SQL > ALTER SYSTEM SET LOCAL_LISTENER = "(ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1525))";

  SQL > ALTER the REGISTRY SYSTEM;

  Finally, I started the listener (lsnrctl start) again.

  Then I tried to connect using Oracle SQL Developer to the customer. The port of 1525 works perfectly well.

  The problem is, when I open the OEM (Oracle Enterprise Manager), it says: "the database is down. Please specify the credentials of the host to access the restart and database diagnostic tools," which is like this: http://imgur.com/oKLPW65

  So I logged on the account of the host, and it shows that the database instance, listener and the agent is all down like this: http://imgur.com/Bzr84bz

  It seems that the port used by the OEM is always 1521.

  What should I do? Can someone help me solve the problem?

  Thanks in advance.

  UPDATE:

  After changing the emoms.properties & the targets.xml (thanks to Elisabeth), you will need to reconfigure dbconsole using emca.

  So what I'm doing is decreasing the config:

  $ emca - deconfig dbcontrol db-rest drop

  and then create again:

  $ emca - create config dbcontrol db-rest

  Voila.

  Best regards

  Jerry Antonius

  Hello

  Try to change the port numbers in the following files

  Don't port no 1521 to 1525

  $ORACLE_HOME /_SID/sysman/config/emoms.properties

  oracle.sysman.eml.mntr.emdRepPort = 1525 (before 1521)

  $ORACLE_HOME /_SID/sysman/emd/targets.xml

  (Before 1521)

  (Before 1521)

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.