Unable to connect to internet on laptop using the router wireless netgear WGR614 v9 and windows 7

Similar Questions

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

  My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

  I followed the instructions on my laptop on how to connect to broadband and I even called the company from whom get connection but they could n, t help me. I need help! I want to use my wireless laptop and how do I do it?

  Hi Hn_668,

  See the articles below and check if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  To set up automatic wireless network configuration

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  5 steps: how to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• When my XP laptop uses the internet connection Wi - Fi on Linksys, it's very slow

  I have a Linksys Wireless G.  I had windows Vista on my desktop, I went to windows XP. Before the switch, I got my Linksys with a single blue cable of the Linksys modem on my desk, with connecting to a port that resembles a big port connection telephone excellent internet connection.  Now with windows XP I have to use two cables to have internet connection, one for the port I have described and a blue cable to the USB port.  With this configuration, when my laptop is used for the Linksys Wireless, the internet on my desktop becomes very slow, does not arrive before the move to windows xp.  What should I do to return to the blue cable connection on my desktop?

  You shouldn't have a USB connection.  In fact, most of the Linksys wireless-G routers I know have even a USB connection.  Then the other end of the "blue cable to the USB port" connected to?  If it's your Linksys router, what is the make and model of this device (look at the label on the bottom and includes any version number).

  And why connect this USB cable in the first place?

• Unable to connect to my server through my laptop using the selections of my network places.

  I can't connect to my desktop (server) via my laptop using the selection of my network places, even if the shared my cell phone directories are available from the desktop (server). Any ideas on how I can fix this?

  I recently installed McAfee Total Protection on my laptop.

  Unlike the Windows Firewall, many third-party firewalls (such as McAfee) manage outbound as well as inbound traffic.  Make sure that the firewall is configured to recognize your LAN as a "trusted network".

  I can't tell you exactly how to do this because McAfee is not user guides for its most recent products available - you can use the built-in help of the product for the guidance system.

• Unable to connect to a Sony DV from my laptop using the firewire port after the installation of updates

  Original title: connection for Vista FireWire camcorder problem

  I used to be able to connect my Sony DV camcorder to my laptop using the FireWire on the camcorder and laptop.   Once it is connected the Movie Maker detect my camcorder and automatically transfer the video.  However, since I've updated my computer laptop July 13, 2012, my laptop does not recognize not the camcorder.  I checked my computer and your camcorder is not yet listed.  I checked the latest updates for the driver of the firewire port 1394 and is the day the device is functioning properly.  Can anyone throw any light on this.  The only thing I can think is that since the update, he may have done something for the connection.

  Hi Scarlett,

  Thanks for the post. I'm sorry to hear that the Sony DV camcorder is not detected.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the model number of the Sony DV camcorder?
  2. you receive an error code or message?

  3 update do you have installed?

  See the Windows updates are installed:

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Please follow the methods and mark the question below:

  Method 1:

  First of all, let us check the status of the FireWire port in Manager devices to do this, follow the steps below:

  Check the status of the port in FireWire devices Manager

  a. Click Start, in the search box type Device Manager and press to enter.
  b. If you don't see the FireWire controller (probably listed under "IEEE 1394 Bus host controllers") in the list, then it is not correctly installed.
  c. If you see a yellow exclamation point, then you must install the drivers, who are usually on a CD that comes with the FireWire card with the camcorder.

  Method 2:

  Step 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack in Windows Vista:

  http://support.Microsoft.com/kb/948187

  Method 3:

  Connecting i.Link® (IEEE 1394) of the camcorder is not recognized by the computer.

  http://www.KB.Sony.com/selfservice/viewContent.do?externalId=C86798&sliceId=1&MDL

  For more information, see the link below:

  Import analog video to your computer by using a DV camera:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Import video from a videotape:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Unable to connect to internet via WiFi

  Hello

  I am unable to connect WiFi with my laptop. It displays connected to the router but the Red (X) between the router and the network. In the system tray to allow brand yellow exclamatory sign wireless. I am able to connect using my cell phone & macbook pro with WiFi, so there is no problem with the router. When I try to solve the problem using the windows feature, and then he said gateway is not available. I can connect to the internet using the cable & I can connect to the Wi Fi on different router but not able to find out why it does not connect with this router Xfinity?

  Here are the details:

  Laptop computer: laptop Compaq Presario CQ58 155SA
  Serial number: [personal information]
  Product number: B6K01EA

  OS: Win 7 64 bit

  Router: Xfinity Comcast

  Please notify. Thanks in advance.

  Thanks & best regards,

  REDA

  Say hello to new raj_sach.

  You have to call Comcast and ask another router.  This model is known to have many questions.

  If you take a look at the job for the router (click here), you can see that it supports up to Windows 7.  This means that all users on Windows 8 will have an update of the firmware (even if you have Windows 7, I wanted to report it).  ARRIS published an update that solves a number of problems with this router - but it will not work on the version you get from Comcast.  This means that Comcast will have to release their own update to solve problems.  You can see on this site on the site of Comcast that this router is known to have problems.

  You can see similar problems in this article and this thread.

  Contact Comcast immediately and ask for a new router.

  Have a great day!

• On my iMac running training camp. I get a message saying that my PC cannot find the wireless hub and it is unable to connect to internet Explorer. Help!

  Connection Wi - Fi with internet explorer 8

  I'm under Boot Camp on my iMac with OS 10.6.8. I am connected to the hub of my son-in-law over a wireless connection.  I can access the internet using Safari on the side of the Mac of the partition successfully, but I can't access the internet by using a wireless setup on the side of the PC of the partition by using Internet Explorer 8.  I get a message saying my side PC created by Boot Camp can not find the wireless hub and is unable to connect to internet Explorer.  Help!

  Hello

  ·          What is the version of the operating system running on your computer?

  I suggest you to install the drivers for the network card on the manufacturer's Web site and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection.

  connection Wi - Fi

  My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?

  Hello

  1 did you change your computer, after which the issue started?
  2. during how long have you had the problem?
  3. what web browser do you use?

  I recommend to update your network card drivers and check if that helps.
  http://support.Microsoft.com/kb/283658

  Let us know the status of the issue and also please answer these questions.

• Wireless cause: the network connection from the laptop to the router, but internet access comes and goes through procedures to 'fix '.

  The Dell laptop I bought is little used, not refurbished a downsizing Corporation.  I bought a refurbished by Cisco, Cisco Linksys router.  I can't stay on the internet for any period of time.  At the time that I open the browser, after the wireless connection, it goes your 'connected' to 'no internet access.  If I go through the diagnosis and fix it, it says I'm connected, but 'no Internet' returns quickly.  It shows a diagram of the connectivity of the laptop to the router but not to the internet router.  I had a second router refurb sent, and it does the same thing.

  This is all new to me (wireless and mobile), so my words my being turned off, but I wonder if it might be the wireless card, or network card (or is it just a different name for the router).  I mean, it's something in the laptop.  If I plug the DSL directly into the laptop, I have a perfect internet connection, so I did not thing is my provider.

  Any help/suggestions appreciated!

  My issue was with the ATT modem not set to fill mode.  modem was not accept what he said was the router.

• Unable to connect to a network or to the Internet on my Dell XPS1530.

  Unable to connect to a network or to the Internet on my Dell XPS1530. When I try to diagnose problem, I get a message that reads "Network Diagnostics cannot run because the Diagnostics Policy Service is not running." Having exhausted the patience all the phone with my IP and Dell, which tells me that it is a problem of Microsoft software. I have two other computers and a PS3, and I am able to connect to the Internet through one any of them. The XPS works under Vista with SP2. Can someone help, please? Thank you.

  Go to start / Control Panel / Administrative Tools / Services and go to diagnostic policy Service and set it to automatic and start it.  If it does not start, check the dependencies and make sure they're too automatic and rnning.  Then see if you can run Network Diagnostics.

  You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those developed to date for the network card and regardless of the device you use to connect (such as a router wireless or such) and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  When I'm in a lke your situation, I usually start from scratch.  Create a new network connection by ensuring that all settings are correct.  Check all the cables (if there is).  You have already reinstalled the drivers - make sure that no firmware or software is also necessary.  Configure the network sharing settings and make sure that you are ready to discover the network and such.  Check other computers to see their settings to make sure you get yours right and essentially the same thing (the same exatly so is another Vista machine connected in the same way).  Go to start / Control Panel / Internet settings and make sure that it's too fixed properly.  To connect, then try again. If this is not the case, remove some time to cool down and then start again with another new connection.  It's almost certainly a parameter that is not correcct (something no doubt very simple).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to internet home with Blackberry 8900 for windows 7

  Unable to connect to internet home with Blackberry 8900 to windows 7, error = a network cable is not plugged in correctly or may be broken, tried a different cable, same problem?

  Hello

  1. are you able to use the Blackberry 8900 on any other computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Support for attached modem use

  http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=55C4DA5CE489E53E47CDDDB9FA0C6A59?externalId=KB05178&sliceId=2&cmd=displayKC&docType=kc&noCount=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl

  If you are still experiencing a problem, I suggest you to contact Blackberry support team for assistance.

  http://supportforums.BlackBerry.com/T5/community-corner/BD-p/corner

• iPad connects to the network, is unable to connect to Internet

  Received my new iPad. Automatically, it connects to my home network but does not connect to the Internet. I rebooted the router and the iPad, but the same thing. Same problem with the old iPad. That is what it is?

  Hello. When you go into settings > WiFi and tap the current network, that see you the IP address and other network settings, or they are all empty? You use DHCP to configure?

• Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  I want to download Ableton software, but it requires 3 GB of free memory that I have available on my MacPro laptop not because most of it is used for my library of music because I'm a DJ.

  I'm not sure how I can do it or not at all.

  Thank you very much.

  1. a Mac Pro is not a laptop. Its a big desktop computer.  You probably have a MacBook Pro, which is a laptop.

  2. No, you cannot share the memory (live RAM) or storage (disk space, which is not memory) like that between computers.

  However, it is very very bad practice to have so little storage space available for your computer.   If you have less than 3 GB, you should seriously consider an external drive. and unload some files on the outside. Its best not to leave your hard drive to go below 10 GB of free space because it can seriously affect your computer's performance.

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.