Unable to connect to Microsoft Server to get SP1. What should I do?

Similar Questions

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• How can I subscribe to nesgroups - get an error unable to connect to the server

  Attempted to subscribe to newsgroups, but get an error message - unable to connect to the server.  What I am doing wrong?

  msnews and msn newsservers and groups are gone.  There are a few free newsservers, such that news://nntp.aioe.org , but a pottery forum is empty.  There are also some newsservers that you can pay for.  You could try emailing somone who already contacted you in the other forums to see if they have suggestions and what they are doing in this regard.

  Steve

• I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

  I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

  Moved to this discussion in the creative forum cloud download & install.

  R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.

• After an attack of virus on the server, I am unable to connect to the server from any client computer.

  After an attack of virus on the server, I am unable to connect to the server from any client computer.

  Applies to: Windows | Windows XP | Networking, Mail, and getting online

  I have a small net work in my house, and until yesterday, the network works well. MSSE clean virus win32 on my server attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. I used MS Fixit widjows firewall and then problem determination after the Client computer request user name & against which I entered the login data, password but it displays the same error message.

  PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  Hello

  Because the problem is with the server, I recommend you post this question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• 'Unable to connect to the server' after updating to iOS 9.3

  After updating my iPhone 6 more for iOS 9.3 I get the message "unable to connect to the server. I can't connect to iCloud more!

  It's your phone antivirus. If you have an application like 'disconnect' you must remove it and then you can connect and reinstall.

• Unable to connect to the server

  I have an officejet pro 8600plus. When I bought it, I have activated ePrint and registered my printer, but never used the feature. Since then, I updated from XP to windows 8.1, changed a router and connected the printer through a series of switches on a wired ethernet connection. A few days ago, I tried to use e print but received a message that I couldn't connect to the server.

  my printer prints fine, connects to each computer on my home network, I just upgraded the firmware with success to [personal information deleted]
  and yet, for more than three days, unable to connect to the server. I even deleted my account eprint printer, after changing his email successfully, but now I can not add new, I can't get the code because I can't activate the web plus services. I can scan from the printer to files network and all, but can't seem to activate eprint.

  can anyone help?

  Thank you

  Gill

  Hi the gills.

  Welcome to the HP Support forums.  I think since upgrade to 8.1 Windows and change your printer router cannot connect to web services to get the job of ePrint feature.

  Please define Manual of the printer an IP address manually and DNS servers. I've included a link to another post, I did it with the stages (including screenshots) how to do it.

• Unable to connect to the server appleid in el capitan?

  Whenever I try to connect to the App Store, iTunes Store or iCloud, I get an error message unable to connect to the server appleid. This all started as soon as the upgrade to El Capitan on my Macbook Pro, that is in late 2011 with 16 GB of ram and 1 TB of hard drive. It was working fine before the upgrade.

  If the firewall is enabled, please disable it in the component of security & confidentiality of system preferences. First of all, you need to unlock the settings by clicking on the padlock icon and entering your administrator password.

• After a virus attack, I am unable to connect to the server from any client computer.

  I have a small net work in my house, and until yesterday, the network works well. MSSE has cleaned up win32 virus attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. Infographic customer request user LRN & passwiord against which I entered the data from the server connection, but it displays the sdame error message. PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  original title: connection from the Client to the network problem

  Hello

  Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public Server on TechNet. Please post your question in the Windows Server Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Unable to connect to Microsoft Office Online

  I get an error "unable to connect to Microsoft Office Online" when you try to create a new template in Word 2007.  I'm running Vista 64 and Office 2007 SP1 - all program fixes are underway.  I am able to reference the help via Internet Explorer site.

  Take a look at your language settings.

  "The problem occurs because of problem specific to the integration of Office Online and Office 2007. "Suites Office 2007, products and applications that run with combinations of languages all over the world we English not localized are currently not supported by Office Online, aimed at American and British English.

  Impossible to connect to Microsoft Office Online for Office 2007 templates
  http://www.mydigitallife.info/2007/12/26/unable-to-connect-to-Microsoft-Office-Online-for-Office-2007-templates/

  http://www.Google.com/search?q=%22Unable+to+connect+to+Microsoft+Office+Online%22&RLS=com.Microsoft: * & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

• Unable to connect to Microsoft Help

  I can't connect to Microsoft Help.   Get the error message.   Same for other devices to aid programs.  I have an internet connection that works very well... just unable to connect to the operating system or other program sites.   All of the suggestions.   Thanks, FZ

  You said that you get an error message. What did he say?

  While I wait, you can try to disable all the automatic detection of proxy:

  (1) options open Internet

  (2) on the connection tab, click LAN settings

  (3) uncheck (all off), and then click OK and restart the computer.

• 2013 Outlook, unable to connect to gmail via IMAP, get the error "Ox800CCC0E."

  I get the following error message:

  Task ' Synchronizing subscribed folders for * address email is removed from the privacy *. ' reported an error (Ox800CCC0E): Outlook cannot synchronize folders subscribed to * address email is removed from the privacy *. Error: Unable to connect to the server. If you continue to receive this message, contact your server administrator or the ISP (ISP).

  Could someone please help. There is no problem with internet connectivity.

  I use a network proxy that comes with the I am studying at University. For Skype and other applications of no browser, there is a possibility to enter passwords for proxy University separately connection options. However I do not understand where to enter this detail to get prospects. Or the problem may come from somewhere else. Any idea?

  If you do not understand where to enter retail, you must ask the people of the University.

• Error network [10061]: unable to connect to the server

  Hello

  I use version 11.1.1.3 to Hyperion. I'm not able to start the Essbase Server services after you restart the server and get the error message below when trying to connect to the Regional service. Other Foundation services are running.

  
  Error:

  "Network error [10061]: unable to connect to the server." The customer has expired waiting to connect to Essbase Agent using the TCP/IP protocol. Check your network connections. Also, make sure that the values for server and port are correct. »

  Is this issue related to the corruption of Essbase security files? Please could you help me solve this problem.

  Thank you

  Michel K

  Yes... Essbase security file is corrupted. I have restored back file and be able to start the Essbase Server services.

  This is the second time I'm getting this question in the last week. Please could you let me know the reason of corruption of Essbase security files.

  Thank you

  Michel K

• Error when you try to access my library in CC saying "unable to connect to the server.

  I get an error when you try to access my library in CC saying "unable to connect to the server" - is there a solution? I can view them on the web app, but can't access it when I open Adobe Illustrator or other Adobe programs. Help, please! The error appears when I hover over the icon to the left of the trash.

  

  Hello

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena

• Unable to connect to the server vCenter because the user name or password not valid

  Hello

  I have a VMware View version 5.1.0 installation (704644) and when I try to add additional virtual machines to an existing pool I get the message (cannot connect to the server vCenter because the username or password are invalid).

  I have checked all the instructions below and still failed to add virtual machines

  If you are unable to connect to vCenter Server:

  1. Confirm that a network port exists and is available. For more information, see increase the number of ports assigned to a virtual switch for VMware View (1026014).
     
     
  2. Confirm services VMware View manager are running. For more information, see check which required VMware View Manager services are running (1026136).
     
     
  3. Confirm that the network is correctly configured for use in a VMware View environment. For more information, see in the VMware View virtual desktop network configuration (1026498).
     
     
  4. Confirm that name resolution is functioning properly in your environment. For more information, see audit for VMware View DNS settings (1026017).
     
     
  5. Check that the permissions/credentials are correct for the user of the vCenter server. For more information, see confirm/credentials permissions are correct for user vCenter/vCenter server (1028705).
     
     
  6. Confirm that outcomes of the interaction of third parties do not exist with the operating system. For more information, see the confirmation that there are no questions of third-party interaction with the OS in a VMware View environment (1027466).
     
     The virtual machine, I have already assigned to this pool, I can access. I can access by using the client view and also from the console.
     

  Has anyone else seen elsewhere?

  See you soon

  You have the same problem with other pools?   Have you returned through configuration under the Configuration/servers view vCenter configuration?