Internet has stopped working when it is connected to the Cisco VPN

Similar Questions

• Get an error 'internet service has stopped working"when you are connected to the internet

  * Original title: my computer keeps do not stay online, I always get a message saying that the internet service has stopped working and it will constantly, I could make dionostics but in vain

  My computer is not online, I get a message that says service is stopped, reconnection. I have DSL service and you run programs to detect a problem, but nothing is

  Hello

  1. which browser is installed on the computer?

  2. What is the full error message?

  3 is this a wired or wireless?

  4. that all the troubleshooting steps have done?

  5 have have there been recent changes made on the computer before the show?

  I suggest you follow the methods provided below and update us with the results.

  Note: If you are using internet explorer, follow the methods provided.

   

  Method 1: Verify the problem by running Internet Explorer mode without modules.

  Temporarily disable all add-ons to see if the modules are the origin of the problem.

  To temporarily disable all add-ons:

  a. click the Start button.

  b. click on all programs, accessories, and click on system tools.

  c. click on Internet Explorer (No Add-ons).

  If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

   

   

  Method 2: Optimize Internet Explorer and check.

   

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

   

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the article and check.

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• Explorer Windows has stopped working when I right click on the files

  When I need to click with the right button on folders, windows Explorer has stopped working.

  up to now, still can't use the right click menu ~.

  Yes, it's the details of the problem.

  Unfortunately, it does not identify the failing module.

  At this point, it may be useful to try to capture a dump of user of the explorer.exe crash mode.

  You can configure Windows to create dumps of user mode. First, create a System Restore Point.

  If you copy and paste the following text in Notepad and save it as a .reg file, then right click on the .reg file and select "Merge" to add to the registry, when the .dmp file explorer.exe plant should be created in the C:\CrashDumps folder:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe]
  "DumpFolder" = hex (2): 43, 00, 3A, 00, 5 c 00, 43, 00, 72, 00, 61, 00, 73, 00, 68, 00, 44, 00, 75,.
  00, 6 D, 00, 70, 00, 73, 00, 00, 00

  
  After Explorer (explorer.exe) crashes, you can, and then make the .dmp file available (provide the link) via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  More information on the collection of user-mode dumps:

  ("msdn.microsoft.com/en-us/library··· .a 85)

  You can also try to use ShellExView, as suggested by BurrWalnut, to try to eliminate a problematic third-party shell extension.

• installation of Windows services has stopped working when you try to install the software

  Unable to install software.tried cmd method, nothing happens

  Original title: installation of windows services has stopped working

  Hello Mohit,

  Welcome to the Microsoft Community Forums.

  I understand that you have a problem with the Windows Installer service.

  But I would like to know some more information on this issue to help you better.

  (1) what is the full error message?

  (2) what software are you trying to install?

  (3) have you tried to install any other software?

  (4) when you say, "tried cmd method" what exactly mean you?

  In the meantime, please try to follow the following suggestions to solve the problem.

  Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.

  How to fix problems with the Windows service install

  http://support.Microsoft.com/kb/2438651/en-us

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
   

  I hope this helps. Otherwise, feel free write us back and we will be happy to help you.

  Thank you.

• "automatic update service has stopped working" when you try to install the software

  I'm trying to install Canon Imagebrowser provided with my camera.  Close program ends the installation process but cannot complete.  I then get an error box saying Microsoft serivce Auto Update has stopped working and the installation does not complete. Have tried several times and have the same problem.  This has happened with the software Imagebrowser - other software on the CD installed fine.

  OK... I thought about it.  Go to the link below and follow the instructions to manually install Imagebrowser.  It worked for me!

  http://USA.Canon.com/Cusa/consumer/standard_display/utility_browser
  Good luck...

• ' DLLhost.exe / COM Surrogate has stopped working "when I change and save the properties of the network adapter

  That's what I usually get

  Version = 1
  EventType = AppHangB1
  EventTime = 130484980926451522
  ReportType = 3
  Consent = 1
  UploadTime = 130484999275764608
  ReportIdentifier = 563046df-ff59-11e3-8bdd-742f68a03d97
  IntegratorReportIdentifier = 563046e0-ff59-11e3-8bdd-742f68a03d97
  Response.BucketId = 685174449
  Response.BucketTable = 5
  Response.Type = 4
  SIG [0]. Name = name of the Application
  SIG [0]. Value = Dllhost.exe
  GIS [1]. Name = Version of the Application
  GIS [1]. Value = 6.1.7600.16385
  GIS [2]. Name = timestamp of the Application
  GIS [2]. Value = 4a5bca54
  GIS [3]. Name = Signature of Hang
  GIS [3]. Value = 0544
  GIS [4]. Name = Type of Hang
  GIS [4]. Value = 0
  DynamicSig [1]. Name = OS Version
  DynamicSig [1]. Value=6.1.7601.2.1.0.256.1
  DynamicSig [2]. Name = locale ID
  DynamicSig [2]. Value = 1033
  DynamicSig [22]. Name = Signature extra Hang 1
  DynamicSig [22]. Value = 05440983ee821818b723a3a237b2dce6
  DynamicSig [23]. Name = Signature Hang extra 2
  DynamicSig [23]. Value = babf
  DynamicSig [24]. Name = Signature Hang extra 3
  DynamicSig [24]. Value = babf43d786a32c16ae0772c4656c1c3a
  DynamicSig [25]. Name = Signature extra Hang 4
  DynamicSig [25]. Value = 0544
  DynamicSig [26]. Name = Signature of additional 5
  DynamicSig [26]. Value = 05440983ee821818b723a3a237b2dce6
  DynamicSig [27]. Name = additional hang Signature 6
  DynamicSig [27]. Value = babf
  DynamicSig [28]. Name = Signature extra Hang 7
  DynamicSig [28]. Value = babf43d786a32c16ae0772c4656c1c3a
  UI [3] = COM Surrogate does not
  UI [4] = If you close the program, you can lose information.
  UI [5] = close the program
  UI [6] = close the program
  UI [7] = close the program
  LoadedModule[0]=C:\Windows\system32\DllHost.exe
  LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
  LoadedModule[2]=C:\Windows\system32\kernel32.dll
  LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
  LoadedModule[4]=C:\Windows\system32\msvcrt.dll
  LoadedModule[5]=C:\Windows\system32\ole32.dll
  LoadedModule[6]=C:\Windows\system32\GDI32.dll
  LoadedModule[7]=C:\Windows\system32\USER32.dll
  LoadedModule[8]=C:\Windows\system32\LPK.dll
  LoadedModule[9]=C:\Windows\system32\USP10.dll
  LoadedModule[10]=C:\Windows\system32\RPCRT4.dll
  LoadedModule [11] = C:\Windows\system32\IMM32. DLL
  LoadedModule[12]=C:\Windows\system32\MSCTF.dll
  LoadedModule[13]=C:\Windows\system32\CRYPTBASE.dll
  LoadedModule[14]=C:\Windows\system32\CLBCatQ.DLL
  LoadedModule[15]=C:\Windows\system32\ADVAPI32.dll
  LoadedModule[16]=C:\Windows\SYSTEM32\sechost.dll
  LoadedModule[17]=C:\Windows\system32\OLEAUT32.dll
  LoadedModule[18]=C:\Windows\system32\CRYPTSP.dll
  LoadedModule[19]=C:\Windows\system32\rsaenh.dll
  LoadedModule[20]=C:\Windows\system32\RpcRtRemote.dll
  LoadedModule[21]=C:\Windows\System32\netshell.dll
  LoadedModule[22]=C:\Windows\system32\SHELL32.dll
  LoadedModule[23]=C:\Windows\system32\SHLWAPI.dll
  LoadedModule [24] = C:\Windows\System32\IPHLPAPI. DLL
  LoadedModule[25]=C:\Windows\system32\NSI.dll
  LoadedModule [26] = C:\Windows\System32\WINNSI. DLL
  LoadedModule[27]=C:\Windows\System32\nlaapi.dll
  LoadedModule[28]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac\comctl32.dll
  LoadedModule[29]=C:\Windows\system32\apphelp.dll
  LoadedModule[30]=C:\Windows\system32\netcfgx.dll
  LoadedModule[31]=C:\Windows\system32\SETUPAPI.dll
  LoadedModule[32]=C:\Windows\system32\CFGMGR32.dll
  LoadedModule[33]=C:\Windows\system32\DEVOBJ.dll
  LoadedModule [34] = C:\Windows\system32\devrtl. DLL
  LoadedModule[35]=C:\Windows\system32\dot3ui.dll
  LoadedModule[36]=C:\Windows\system32\dot3api.dll
  LoadedModule [37] = to C:\Windows\system32\ATL. DLL
  LoadedModule[38]=C:\Windows\system32\eappcfg.dll
  LoadedModule[39]=C:\Windows\system32\hnetcfg.dll
  LoadedModule[40]=C:\Windows\system32\slc.dll
  LoadedModule[41]=C:\Windows\system32\GPAPI.dll
  LoadedModule[42]=C:\Windows\system32\USERENV.dll
  LoadedModule[43]=C:\Windows\system32\profapi.dll
  LoadedModule[44]=C:\Windows\system32\wbem\wbemprox.dll
  LoadedModule[45]=C:\Windows\system32\wbemcomn.dll
  LoadedModule[46]=C:\Windows\system32\WS2_32.dll
  LoadedModule[47]=C:\Windows\system32\wbem\wbemsvc.dll
  LoadedModule[48]=C:\Windows\system32\wbem\fastprox.dll
  LoadedModule[49]=C:\Windows\system32\NTDSAPI.dll
  LoadedModule [50] = C:\Windows\system32\dhcpcsvc. DLL
  LoadedModule [51] = C:\Windows\system32\dhcpcsvc6. DLL
  LoadedModule[52]=C:\Windows\system32\UxTheme.dll
  LoadedModule[53]=C:\Windows\system32\oleacc.dll
  LoadedModule[54]=C:\Windows\system32\SPINF.dll
  LoadedModule[55]=C:\Windows\system32\WINTRUST.dll
  LoadedModule[56]=C:\Windows\system32\CRYPT32.dll
  LoadedModule[57]=C:\Windows\system32\MSASN1.dll
  LoadedModule[58]=C:\Windows\system32\VBoxNetFltNobj.dll
  LoadedModule[59]=C:\Windows\system32\ndiscapCfg.dll
  LoadedModule[60]=C:\Windows\system32\rascfg.dll
  LoadedModule[61]=C:\Windows\system32\rtutils.dll
  LoadedModule[62]=C:\Windows\system32\MPRAPI.dll
  LoadedModule[63]=C:\Windows\system32\tcpipcfg.dll
  LoadedModule[64]=C:\Windows\system32\DNSAPI.dll
  State [0]. Key = transport. DoneStage1
  State [0]. Value = 1
  FriendlyEventName = Stopped responding and was closed
  ConsentKey = AppHangXProcB1
  AppName = COM Surrogate
  AppPath=C:\Windows\System32\dllhost.exe
  ReportDescription = a problem caused this program blocking interact with Windows.

  chk axelRB response from the link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/COM-surrogate-has-stopped-working/1c5f897f-bb99-496b-BC58-ab33fb0cd547

• Windows 7 Clipboard stops working when it is connected to the remote desktop

  The two machines are Windows 7 SP1 with the latest updates.  Remote configuration is configured with the selected share clipboard.  The Clipboard works on the host machine until the remote desktop is started.  The Clipboard of the remote computer works without any problem.  Clipboard on the host machine starts working again when rdpclip.exe is interrupted on the remote computer.  If rdpclip.exe is restarted on the remote computer, the Clipboard of the host machine then stops working again.

  I had similar problems with Clipboard in the past, but getting the two machines on a fixed day.  It seems more recent updates have created a new problem.

  Hello

  Thanks for posting your query in Microsoft Community.

  The question could arise if the process is damaged and should be revoked on the remote computer to restore operation. I suggest you to try the following steps on the remote computer and check if the problem persists.

  1. Open Task Manager (right click taskbar and select Task Manager)
  2. Go to the process tab
  3. Select rdpclip.exe
  4. Click on end process
  5. Go to the Application tab
  6. Click on the new process
  7. Rdpclip type
  8. Click OK

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Client VPN sail to 10.0.0.0 when you are connected to the Cisco VPN

  I have a cisco ASA that provides access remote vpn for users. The address pool is 10.16.135.x. When a user (windows) connects to the VPN, a route to 10.0.0.0 255.0.0.0 is added to the routing table. If the private IP address of the user is in the 10.x.x.x range, the user can still connect to its local network. However, if the user has a remote site that also uses 10.x.x.x, the user is no longer able to connect to the remote site because of the 10.0.0.0 new road is added after the vpn connection is established.

  10.0.0.0 255.0.0.0 on a 10.16.135.217 route 281

  10.0.0.0 255.0.0.0 10.0.0.1 10.16.135.217 100

  10.16.135.217 255.255.255.255 on a 10.16.135.217 route 281

  Small,

  Can you please set the pool like this:

  mask 10.16.1.10 - 10.16.1.254 255.255.255.0 IP local pool Subnet_10

  Test again and I would like to know the results.

  Daniel Moreno

  Please note all messages that will be useful

• SE error message "Windows Explorer has stopped working" when you click on network and sharing Center

  Original title: Windows Explorer has stopped working when I click on network and sharing and also...

  Hello technical savvy people!

  Windows Explorer stops working when I click on network and sharing, and also when I click on system.

  -Otherwise, I rarely get this little automatic.
  But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
  nor know how my system!

  Can you suggest healings?
  Thank you for your attention,
  marlem388

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Hope this information helps.

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

• My lbp6000 has stopped working when I upgraded to osx 9 mavericks. How can I get it back?

  My lbp6000 has stopped working when I upgraded to osx 9 mavericks.  How can I get it back?

  Hi gkharris!

  I know that this issue is frustrating.  I'll be happy to help you.

  When upgrading to new operating systems, we recommend that you uninstall and reinstall the drivers.  Please uninstall the printer by following the instructions in the article:

  Uninstalling the printer driver (CAPT V3.55)

  After uninstalling the driver, please download the latest driver on the Canon USA site.  Please click the link below:

  http://USA.Canon.com/Cusa/support/consumer

  Once you are on the site, enter your model number.  Your operating system will be detected automatically.  Click on the word 'Pilot', and then select The CAPT Printer Driver Ver.3.65 and save the file. Then, open it from the save location and install the driver package.

  Finally, save the printer in the print queue by following the instructions in the following article:

  Registration of the printer with USB (Mac OS X Lion) ( CAPT LBP Series Driver3.36)

  * Although it shows OS X Lion, the instructions are the same.

  I hope this information is useful for you.  If you need assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• Error 'setup.exe has stopped working' when installing Quicken.

  Original title: setup.exe has stopped working

  I have read through the related forums and don't think I've seen a solid answer to this problem.  I'm trying to reinstall Quicken on my Dell Inspiron 530 Vista with service pack 2.  (Long and ugly tells how he got deleted at first - thank you, Intuit).

  When I try to install Quicken, I get the above error message.  I tried the clean boot solution; I tried to enter the installation and execution of the exe directly from there; I tried to do a right click to open/run as administrator... etc.

  I have NOT run BigFix.com or other third-party software to solve this problem - I'm very comfortable with another piece of software download and throw into the equation.  What is a corrupted registry and I have TO run third to fix?  Is it a bug of Vista - is there a fix of bug for her?

  I really don't like that to 'guilty' at this point, I just want to repair and recover my electronic payments!  Help, please!

  Hey, Keenon,.

  Please, remove all existing components of Quicken from the computer and do a fresh install.

  Step 1: use QcleanUI uninstall Quicken

  Follow the instructions in the article below for more information on how to use this tool.

  The use of QcleanUI to uninstall Quicken

  
  Step 2: Install Quicken

   

  Refer to this article for installation help.

  Installation of Quicken on Microsoft Windows 7 or Vista

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Windows Media Player has stopped working" when trying to open Media Player

  original title: HELP! WINDOWS MEDIA PLAYER HAS STOPPED WORKING

  Help! -Whenever I tried to open my Windows media player... I get a message that my Windows media player has stopped working... I think the problem is because I had deleted some videos that were inside the window media player... so, how can I solve this problem? Help, please! THX ~

  I also had some success with a similar problem by making a backup of the sub folder, then remove it so that media player re-creates its database

  C:\Users\username\AppData\Local\Microsoft\Media Player
  In particular, when you moved or deleted an item in your library and Media player has not picked up the change and displays an entry of spleen, or a duplicate.

• Driver.exe has stopped working when you try to play Driver.San Francisco.

  I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7

  Hello

  1. what game do you play?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular game?

  4. What is the exact error message you received?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to see link and check.

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2665946

  See also:

  If the problem is related to Microsoft, I suggest you to see link and check.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

• CS6 has stopped working when I try to print. I reinstalled CS6 but still has the same problim

  CS6 has stopped working when I try to print. I reinstalled CS6 but still has the same problem. He seams to have started when I downloaded the ICC profile

  reset your preferences-

  Acrobat: https://forums.adobe.com/thread/1595848?start=0&tstart=0

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  hearing: https://forums.adobe.com/thread/1079494

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InCopy: https://forums.adobe.com/thread/526990

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall