Unable to connect to the CLI as admin (collectorplugin and the root are disabled)

Similar Questions

• Unable to connect to the Administration of Linksys to my WRT54G v.6 page

  Hello

  Recently, I moved into a new House and brought my old router with me.  I set up this router to my former place long ago, but when I hooked it up here, I am unable to connect to the Admin of Linksys page (http://192.168.1.1 for example).  I think that I changed the router what IP to 192.168.1.101... it was a long time ago so I don't remember exactly.  I tried find what it was by typing "ipconfig" in the command prompt and using the address "Default gateway" IP address as the address of router, but that has not worked.

  I tried to reset the router to factory default settings by pressing the button of reset for 30 seconds, then connect to http://192.168.1.1 but it does not help.  When I release the reset button, just power light continues to blink rapidly until I unplug the router.

  I can access the internet without any problem, but I noticed that I connect my router differently than the instructions provided here.  I connect an ethernet cable from my modem to 1 of the 4 ports on the router (just like my laptop) rather than the port of 'internet' on the back.  Don't know if that is related or not, or even what is the cause.

  I use Windows Vista on my laptop if it makes a difference.

  Thanks in advance for your help,

  Ryan

  The modem must be connected to the internet port of the router and the conputer on one of the 4 ports on the router... Now, check if you are able to ping the default gateway of the router. If you get 4 answers then, make broser on the computer settings... Open an IE, click Tools > Internet Options, then click on delete and delete all the files, cookies, history, forms... GoTo 'Connections', make sure that never Dial a connection is selected, click on network settings and make sure that all the options are unchecked... Once you are finished, click OK... Close IE and reopen...

  Now, try to open the linksys configuration page by typing 192.168.1.1 in the address bar. You can also try another computer.

• Unable to connect to the Web sites security and microsoft, but internet is not working properly

  Can anyone help?
  Now, this is getting very frustrating.
  I can connect to the internet and browse most Web sites. My email works fine but I can't connect to websites www.microsoft , Norton is 'unable to connect to the Live Update server, check the internet connection' and my media center can't find my internet connection.
  What is going on?
  I have a subscription to Norton who can't find any problems. I also downloaded onecare and trojan remover, returning with a clean report.
  Please help before I go out what remains of my hair.
  What about Frank

  Hello

  You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.

  Check with this site
  http://www.confickerworkinggroup.org/infection_test/cfeyechart.html

  Alert on the Win32/conficker virus
  http://support.Microsoft.com/kb/962007

  Protect yourself from Conficker
  http://www.Microsoft.com/security/worms/Conficker.aspx

  How to remove the worm Downadup Conficker (Uninstall Instructions)
  http://www.bleepingcomputer.com/virus-removal/remove-Downadup-Conficker

  How to manually remove the Conficker worm
  http://www.411-spyware.com/Conficker-worm-removal#how-to-remove

  BDTool to remove
  http://www.bdtools.NET/

  -----------------------------------------------

  Run the malicious Microsoft removal tool, scan with Malwarebytes, Prevx to be sure you know all the
  malware involved and if necessary use UnHackMe.

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows Update - if necessary, you can download it here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Malicious removal tool from Microsoft
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Malwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
  http://www.Malwarebytes.org/

  Here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------

  Also do to the General corruption of cleaning.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Run Malwarebytes when you can.

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  Close IE

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Don't forget to do:

  Logon as administrator

  Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN

  Enter each of these one at a time and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset
  ------------------------------------------------------

  Here are a few rootkits if it were a question:

  SpyDLL Remover - free
  http://securityxploded.com/spydllremover.php

  Advanced Windows Service Manager
  http://securityxploded.com/winservicemanager.php

  Run the Rootkit Revealer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspx

  UnHackme - trial
  http://www.Greatis.com/UnHackMe/

  This shows how to use UnHackme and includes a link to version 2.5 – use it as a guideline and current
  available as version above is 5.5
  http://safecomputing.umn.edu/guides/scan_unhackme.html

  IceSword - free
  http://www.AntiRootkit.com/software/IceSword.htm
  Instructions and pictorial
  http://securityxploded.com/IceSword.php
  Tutorial for use of IceSword
  http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3D

  Revo Uninstaller - free
  http://www.revouninstaller.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I get an error, "Unable to connect to the Service of system event Notification service" on the computer.

  Original title: unable to connect to a service of windowns

  I had this problem! "Unable to connect to the Service of system event Notification service. This problem prevents standard users to log on to the system. As long as administrator, you can go through the system event log to see why the service did not respond"how to solve?

  Hello

  Thanks for posting this question in the Microsoft Community.

  From your post, it seems that you can not connect to a windows service.

  When you receive this error?

  Check if the Service Notification of system events is running or not. To check the services

  a. click on start.

  b. in the start search box, type "Services".

  c. click right on - RUN AS ADMIN

  Check if the below mentioned, service was mentioned State and type start.

  System Event Notification Service started automatically

  Go back with the details so that we can help you better.

• Unable to connect to the internet after the removal of important processes in the task bar

  I am not very tech-savvy then let me explain.

  I have a laptop Lenovo I recently bought in August 2014.  A friend suggested that I have download the free application "Open Office" in line, so I could open a school power point.  Open Office gave me a handful of viruses, which I managed to delete, then having served the system well, panic I accidentally opened the Task Manager and deleted a bunch of processes that are running.

  Now, I find that, although I am connected to WiFi, I can't open Internet.  I click on Firefox, but it shows that I am unable to connect to the Internet.

  I have Windows 8; an easy way I can solve this problem?

  Thank you.

  Original title: I accidentally turned off the program that allows my computer to connect to the Internet

  Hi Tunasushiroll,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  The problem can occur for various reasons, including incorrect TCP/IP settings configured, firewalls third of anti-virus programs blocking the connection, or due to bad the advanced sharing settings. So, I would suggest trying the following methods and check if you system is able to detect the wireless network.

  Method 1:

  Run the troubleshooter network first, and then test your Internet connection.

  Open the Network Troubleshooter by hitting on any fly in the Dashboard screen, quilting Search(or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), entering the network troubleshooterin the search box, type, or by clicking settingsand then by typing or clicking on identify and fix network problems.

  If the problem persists, try the following method.

  Method 2:

  Second of all, please check if the WLAN service is started and set to automatic. If it is stopped, then I suggest you to start the service and set it to automatic.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Select the Autoconfiguration WLAN service in the list and double-click it.
  3. Change the startup to Automatic type, then click Start to start the service.
  4. Click apply and then click OK.
  5. Restart the computer and verify if the network is detected. If this is not the case, go to method 3.

  Method 3:

  Reset the DNS and TCP/IP settings.

  1. Press the Windows key + X, click prompt (Admin).
  2. Please enter the following commands and press ENTER after each one.

     netsh int ip reset resetlog.txt
     netsh winsock reset
     ipconfig/registerdns
     ipconfig/flushdns
     ipconfig/release

  3. Restart the computer to check the issue.

  Check if the system is able to detect the network. If this is not the case, go to method 4.

  Method 4:
  Temporarily disable the security software (if any), and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  Windows wireless and wired network connection problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• ATG: Unable to connect to the ACC

  Unable to connect to the URL rmi://localhost:8860 / atg/devtools/UpdateAgent

  Couldn't make clear for module < app > URL http://LP-047DFGRDMDNS:10180 / dyn/admin/dynamoModuleResource /? moduleNMae = app & resourceURI = META-INF/MENIFEST. MF

  This is usually caused by a wrong setting of the property the/atg/devtools/UpdateAgent component of core adminPort.

  This property must be set to the HTTP port number for the Administration of the Dynamo server.

  I opened http://localhost:10180 / dyn/admin/kernel/atg/devtools/UpdateAgent /? propertyName = hostName and changed it to ComputerName localhost and it workes for now...

• Unable to connect to the server administration Serengeti

  I am building a test for BDE configuration, and now I'm stuck with a problem.

  Problem: Unable to connect to the administration server Serengeti using BDE plugin in the Web Client. After you select the management server in Serengeti, when I click on OK, I get an error message "Connection Failed!". Screenshot of the error is attached.

  Things I've tried so far:

  1. I tried using IE, Firefox, but I get the same error.

  2 uninstall the plugin BDE, re-installed, but still the same problem

  3. DNS resolution works quite well.

  4. I am able to ping to/from all possible directions

  5. the VAPP has been deployed with the resources box initialize verified. In addition, SSO registration was made

  6. have you deployed nine VAPP a few times, but still the same problem.

  7. when VAPP is deployed without SSO registration, I can connect using Serengeti CLI, but of the Web Client, I always get the same question. Strangely, SSO 19.ne recording enabled, I can't to Serengeti CLI as well.

  8. as in the other posts, ran < EnableSSOAuth > command and restart the Tomcat service. Always the same question.

  9. have you restarted SSO, VC, paralytic, but not luck.

  Excerpt from the server logs Serengeti is below:

  [root@bigdata ~] # tail-f /opt/serengeti/logs/serengeti.log

  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.java:588)
  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:489)
  at java.lang.Thread.run(Thread.java:636)
  2013 05 August at 21:01:11, 245 + 0000 INFO http-8080-3 | com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl$ RequestResponseProcessor: ask the message has expired. Server message: ns0:MessageExpired: request timed out
  2013 05 August at 21:01:11, 245 + 0000 INFO http-8080-3 | com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl$ RequestResponseProcessor: server returned "expired query" less than 0 seconds after application has been published, but it should not be expired at least 600 seconds.
  2013 05 August at 21:01:11, 245 + 0000 ERROR http-8080-3 | com.vmware.bdd.security.sso.utils.SecurityUtils: could not validate the token by sso: server returned "expired query" less than 0 seconds after application has been published, but it should not be expired at least 600 seconds.

  [root@bigdata ~] # tail-f /opt/serengeti/logs/vhm.log

  [root@bigdata ~] # tail-f /opt/serengeti/logs/vhm.log

  21:22:19.878 05 August 2013 [ClusterSCL_Poll_Thread-VcVlsi] No. found clusters for hadoop UUID SERENGETI-VAPP-BDEvApp

  21:22:19.878 August 05, 2013 [ClusterSCL_Poll_Thread-ChangeListener] temporarily lost the connection to the CR...

  21:22:24.988 05 August 2013 [ClusterSCL_Poll_Thread-VcVlsi] No. found clusters for hadoop UUID SERENGETI-VAPP-BDEvApp

  21:22:24.988 August 05, 2013 [ClusterSCL_Poll_Thread-ChangeListener] temporarily lost the connection to the CR...

  21:22:30.98 05 August 2013 [ClusterSCL_Poll_Thread-VcVlsi] No. found clusters for hadoop UUID SERENGETI-VAPP-BDEvApp

  21:22:30.99 August 05, 2013 [ClusterSCL_Poll_Thread-ChangeListener] temporarily lost the connection to the CR...

  Has anyone seen this problem?

  Kind regards

  Nitin Gupta

  
  

  I saw the log says "com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl$ RequestResponseProcessor: server returned 'query' expired less than 0 seconds after application has been published, but it should not be expired for 600 seconds at least." for these connection request. " According to Ko to http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2038086

  You may need to update the vc server local time. Please have a try on this KB and see if it works.

  Thank you

  Jun

• Unable to connect to the server Essbase (error #1051293)

  Hello

  Using Essbase Integration Services Consol, I created a template OLAP, and then click OLAP Metaoutline and even checked. But when I tried to load the members and the data I just had an error that is "unable to connect to the Essbase server: Localhost (error #1051293).

  If any of you have solution for this issue, so kindly help me.

  Saami

  Do you know who your security Admin? Or at least you have access to Shared service URL?

  In LDAP, type your user ID and you see your start-up. Add the new app to your user ID, and you define.

  Essbase Administration Services to help online

• RC-40201: unable to connect to the database

  Hi Experts,

  While running 'perl adcfgclone.pl appsTier' I get below error.

  [applmgr@tfnvlskp01 bin] $ perl adcfgclone.pl appsTier

  Enter the password [APPS] APPS:

  ....

  ....

  Enter the number of the port pool [0-99]:

  70

  Audit of the pool of port 70

  fact: Port pool 70 is free

  Information available at /app/oracle/testappl/admin/out/TEST_tfnvlskp01/portpool.lst complete port

  Checking the connection to the base...

  RC-40201: unable to connect to the TEST database.

  Enter the listener of the port database [1531]: 1526

  RC-40201: unable to connect to the TEST database.

  Could not establish connection to database on Port 1526.

  Please verify that the database is running.

  Make sure that the Port DB corresponds to that used on the dbTier.

  ERROR: creation of context not completed successfully.

  Please check for errors in the /tmp/adcfgclone_28867.err file

  But when I check the listener and the DB to db node status, everything is running.

  STATUS of the LISTENER

  ------------------------

  Alias TEST

  Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production

  Start date October 14, 2013 06:33:49

  Uptime 0 days 0 h 0 min 0 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /app/orabin/testdb/11.2.0/network/admin/TEST_tfnslskp01/listener.ora file

  The listener log file /app/orabin/testdb/11.2.0/log/diag/tnslsnr/tfnslskp01/test/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROCTEST)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=tfnslskp01.d1.peapod.com) (PORT = 1526)))

  Summary of services...

  Service 'PLSExtProc' has 1 instance (s).

  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...

  Service 'TEST' has 1 instance (s).

  Instance of 'TEST', status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  SQL > select instance_name, status from v$ instance;

  STATUS INSTANCE_NAME

  ---------------- ------------

  OPEN TEST

  Outputs information complete port available at /app/oracle/testappl/admin/out/TEST_tfnvlskp01/portpool.lst

  List of allocated ports based on port 70 pool *.

  Web listening port: 8070

  Database port: 1591

  RPC port: 1696

  Reports port: 7070

  OPROC Manager of Port: 8170

  Web PLSQL Port: 8270

  Port of servlet: 8870

  Listening port of forms: 9070

  Data port for the server Metrics: 9170

  Req server settings. Port: 9270

  JTF Fulfillment Server Port: 9370

  Map Viewer Servlet Port: 9870

  Utility Web OEM port: 10070

  VisiBroker OrbServer Agent Port: 10170

  ACEM Server Port: 10620-10625

  ACEM Telnet Port: 10620,10622,10624

  ACEM Port Dispatcher: 10580-10583

  Range of ports OACORE Servlet: 16700-16709

  Port range of discoverer Servlet: 17700-17709

  Port range of forms Servlet: 18700-18709

  Port TCF: 15070

  Range of ports XMLSVCS Servlet: 19700-19709

  Port of Java object Cache: 12415

  iMeeting Collaboration Server Port: 9570

  iMeeting the registration Server Port: 9670

  iMeeting iMon port Monitor Port: 9770

  Please let me know if the value portpool.lst to the Port of database should be 1526

  Or

  Miss me a few concepts here and I have to choose another port instead of the 70 pool value.

  OS - RHEL 5.4 version (64-bit)

  Version of DB - 11.2.0.3

  Version of the EBS - 11.5.10.2

  -Thank you

  Hello

  This is what has been done on my previous post on the basin of the port and the listening port you are trying to connect, as above, that you use 70 portpool was offset... This is what did not create a connection on port 1526 (which means chicken port 5)

  anyway nice to hear that the problem is now resolved

  Please mark the thread as answered and close it.

  Thank you &

  Best regards

• RC-40201: unable to connect to the TEST database running adcfgclone.pl appsTier

  Hi Experts,

  While performing a cloning my instance of R12, I got RC-40201 error when I ran "adcfgclone.pl appsTier.

  [appltst@oracleupk bin] $ perl adcfgclone.pl appsTier

  Copyright (c) 2002 Oracle Corporation

  Redwood Shores, California, USA

  Applications Oracle rapid Clone

  Version 12.0.0

  adcfgclone Version 120.31.12010000.1

  Enter the password for APPS:

  Running:

  / data/appl_top/apps/apps_st/comn/clone/bin /... / JRE/bin/Java-Xmx600M - cp /data/appl_top/apps/apps_st/comn/clone/jlib/java:/data/appl_top/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.context.CloneContext EI/data/appl_top/apps/apps_st/comn/clone/bin /... /Context/Apps/CTXORIG.xml-valider - pairsfile /tmp/adpairsfile_24425.lst-stade/data/appl_top/apps/apps_st/comn/clone 2 > /tmp/adcfgclone_24425.err; ECHO $? > /tmp/adcfgclone_24425.res

  Logfile located at /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log

  Provide the values required for the creation of the new file APPL_TOP context.

  Target System Hostname (virtual or normal) [oracleupk]:

  SID data system target: TEST

  Target database system [oracleupk] server node:

  Target system Base Directory: / data / appl_top

  Target system tools ORACLE_HOME directory [/ data/appl_top/apps/tech_st/10.1.2]:

  Target Web ORACLE_HOME directory system [/ data/appl_top/apps/tech_st/10.1.3]:

  Target system APPL_TOP directory [/ data/appl_top/apps/apps_st/appl]:

  Target system COMMON_TOP directory [/ data/appl_top/apps/apps_st/comn]:

  Target system Instance home directory [/ data/appl_top/inst]:

  Target system service root [activated]:

  Target Web Entry Point [active] System Services:

  Target [active] System Web Application Services:

  Target [active] Batch Processing Services system:

  Other Services target system [off]:

  You want to preserve the display [oracleupk:0.0] (y/n)? : n

  Target display system [oracleupk:0.0]: oracleupk:1.0

  System Target Pool [0-99] port: 80

  Audit of the pool of port 80

  fact: Port 80 pool is free

  Report file is located at /data/appl_top/inst/apps/TEST_oracleupk/admin/out/portpool.lst

  Information available at /data/appl_top/inst/apps/TEST_oracleupk/admin/out/portpool.lst complete port

  RC-40201: unable to connect to the TEST database.

  Create the new file APPL_TOP context of:

  /Data/APPL_TOP/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp

  The new context APPL_TOP file was created:

  / Data/APPL_TOP/inst/Apps/TEST_oracleupk/Appl/admin/TEST_oracleupk. XML

  Logfile located at /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log

  Check the context Clone logfile /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log for more details.

  Clone of fast running with the command:

  Perl java /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl = / data/appl_top/apps/apps_st/comn/clone/bin /... /JRE mode = apply dialing = / data/appl_top/apps/apps_st/comn/clone point = appsTier = CUSTOM appctxtg=/data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml contextValidated = true showProgress method

  Running:

  Perl java /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl = / data/appl_top/apps/apps_st/comn/clone/bin /... /JRE mode = apply dialing = / data/appl_top/apps/apps_st/comn/clone point = appsTier = CUSTOM appctxtg=/data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml contextValidated = true showProgress method

  Apps for password:

  Start application layer apply - Fri Oct 12 15:01:20 2013

  / données/appl_top/apps/apps_st/comn/clone/bin /... /jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /data/appl_top/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/ojdbc14.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/java:/data/appl_top/apps/apps_st/comn/clone/jlib/oui/OraInstaller.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/oui/ewt3.jar:/data/appl_top/apps/apps_st/comn/clone/ jlib/Oui/share.jar:/data/appl_top/apps/apps_st/ Comn/clone/jlib/Oui/srvm.jar:/Data/APPL_TOP/Apps/apps_st/COMN/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyAppsTier EI /data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml-/data/appl_top/apps/apps_st/comn/clone - scene showProgress

  Password APPS: log file located at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_09121501.log

  -79% completed

  ERROR when executing apply...

  Fri Oct 12 15:07:47 2013

  ERROR: Cannot run /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl

  Contents of the log file: -.

  [AutoConfig error report]

  The following report lists the errors autoconfig met in each

  execution phase.  Errors are grouped by directory and by phase.

  The format of the report is:

  < file name > < phase > < eventually return code >

  [INSTALLATION STAGE]

  AutoConfig could not successfully run the following scripts:

  Directory: / data/appl_top/inst/apps/TEST_oracleupk/admin/install

  adgendbc.sh INSTE8_SETUP 1

  afcpnode.sh INSTE8_SETUP 1

  afgcsreg.sh INSTE8_SETUP 1

  txkWfClone.sh INSTALL_SETUP 1

  [PROFILE PHASE]

  AutoConfig could not successfully run the following scripts:

  Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/appl_top/apps/apps_st/appl/au/12.0.0/perl-je /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/scripts/adexecsql.pl sqlfile = / data/appl_top/inst/apps/TEST_ oracleupk/admin /. install

  afwebprf. SQL INSTE8_PRF 1

  amscmprf. SQL INSTE8_PRF 1

  amswebprf. SQL INSTE8_PRF 1

  bisadmprf. SQL INSTE8_PRF 1

  bisdblrp. SQL INSTE8_PRF 1

  clnadmprf. SQL INSTE8_PRF 1

  cncmprf. SQL INSTE8_PRF 1

  cseadmprf. SQL INSTE8_PRF 1

  csfadmprf. SQL INSTE8_PRF 1

  csiadmprf. SQL INSTE8_PRF 1

  eamadmprf. SQL INSTE8_PRF 1

  fteadmprf. SQL INSTE8_PRF 1

  ibywebprf. SQL INSTE8_PRF 1

  icxwebprf. SQL INSTE8_PRF 1

  oksfrmprf. SQL INSTE8_PRF 1

  wshadmprf. SQL INSTE8_PRF 1

  Directory: / data/appl_top/inst/apps/TEST_oracleupk/admin/install

  adadmprf.sh INSTE8_PRF 1

  admk80ln.sh INSTALL_PRF 1

  afadmprf.sh INSTE8_PRF 1

  afcpctx.sh INSTE8_PRF 1

  	afcpgsm.sh	INSTE8_PRF	1
  	igccmprf.sh	INSTE8_PRF	1
  	jtfictx.sh	INSTE8_PRF	1
  	okladmprf.sh	INSTE8_PRF	1
  	txkJavaMailerCfg.sh	INSTE8_PRF	1
  	txkWebServicescfg.sh	INSTE8_PRF	1

  [APPLY PHASE]

  AutoConfig could not successfully run the following scripts:

  	Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/appl_top/apps/apps_st/appl/au/12.0.0/perl-je /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi/data/appl_top/inst/apps/TEST_oracleupk/admin/install
  	adadmat.pl	INSTE8_APPLY	1

  Fate of 31 stateful auto-configuration

  RC-50014: Fatal: failed to run the auto configuration service

  Asked by oracle.apps.ad.clone.ApplyApplTop

  ERROR: AutoConfig completed with errors. Check the logfile at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_09121501.log for more details.

  ApplyApplTop completed successfully.

  # Check the race situation AutoConfig of ApplyApplTop

  WARNING: The autoconfiguration service has completed with errors.

  Please help me solve this problem, your prompt response will be highly appreciated.

  -Thank you

  Ankur

  Audit of the pool of port 70

  fact: Port pool 70 is free

  You used port 70 for the node of the database layer, so you will need to use the same port pool (70 instead of 80) when running "perl adcfgclone.pl appsTier.

  Thank you

  Hussein

• Unable to connect to the management console essbase server,

  Hi all..

  After having managed completely the installation and configuration of essbase 11.1.2.3 iam unable to connect to the management console essbase server,

  and also, when connecting to the oracle database, he says 'not found oracle. "

  Essbase 11.1.2.3 is installed in windows server 2008 R1.

  kindly help us.

  OK so Essbase is now running, so you should be able to test a connection through Maxl, run c:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\startMaxl.bat

  e.g. login password admin on ServerName.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• Unable to connect to the App Store and auto delete app

  Hi, I never update my ipad because I never, and I do not have the space for it anyway. Now and then I get the message saying ipad needs space for the update, press ok to allow deletion, or something in that sense. Theres two options cancel or ok. Today I accidentally pressed ok. He deleted my largest app and now I am having problems with the App Store. I can open it and see the recommended page. I think I can upload them as well, but when I use the search bar, it says unable to connect to the App Store. I don't know what to do and how to cancel.

  First of all, make sure that you don't have enough free space before trying to re-download the application. Once you know that you have enough space, try these two ways to get to the app.

  Click on the tab purchased on the App Store and see if the application appears in a search here or just trying to slide through until you see the app and then download it from there.

  If this does not work, do a Google search for the app. It should appear in the search. Tap on the app in the Google search and who should open the description window app on the App Store with the download next to the app icon.

• Unable to connect using the current password

  Using the current password which only had 6 characters - have now changed to 8 hope if this helps solve the problem.
  Have you noticed too there was an update of Mozilla on my laptop the day before that this problem then this could be the reason?

  Unable to connect using the current password

  It is far from a complete problem description.
  Please explain in detail

  • what you were doing
  • That's happened

  Using the current password which only had 6 characters

  6 characters is a very weak password. Consider using a password manager to generate longer and more complex passwords and to remember these passwords.

• Unable to connect to the internet update version

  I've updated to the latest version 35, but since then, the browser seems unable to connect to the internet. I thought it was my firewall that was blocking the program. I did what was suggested to work around this problem, that is, to remove my firewall and then add it again. But it does not solve the problem. There is nothing wrong with my internet, how am I be able to connect to internet by using IE or Chrome. And I was able to connect to the internet in the previous version of Firefox. Unfortunately, the new updated version is not allow me to. Have no solution?

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls