Unable to connect to the FTP site outside
So I put everything up to having a dynamic dns and I can access the ftp internally, but cannot access the ftp from outside any suggestion. Heres a little I have verizon wireless modem and my router is connected to the modem I have ip port ending par.14 which is my nighthawk forwards towards the front port of the router port 21
You do not specify what router you have, but since you are posting in the Nighthawk forum, I'll assume that's what you have.
If you look on page 89 of the R7000 manual, you will see that there are two FTP settings. One to allow local access and the other to allow access to the Internet. You must activate the latter.
http://www.downloads.NETGEAR.com/files/GDC/r7000/R7000_UM_21Dec2015.PDF
Tags: Netgear
Similar Questions
-
After installing an update on Friday morning, I am unable to connect to the HTTP site
I ran an update Thursday night and Friday morning that I was unable to connect to the internet. After a repair, it seems that I can connect to https and ftp sites, but I can't connect to non-secure http sites. I don't know if a setting has been changed or if there is another question. Thanks in advance for any help.
original title: unable to connect to http sitesI finished to restore on the eve of the update and everything works. I did it after trying the method 1 & 2 above. WinHTTP was not anywhere on the list of services and connections have been implemented according to the instructions. I hesitate to run updates until I know what caused the problem.
The browser is IE.
Here's the ID numbers updates which took place:
KB2618451, KB2618444, KB2544893, KB2564958, KB2592799, KB2619339, KB2620712, KB2624667, KB2633171, KB2639417, KB2633952, KB2641690 AND KB890830. -
Unable to connect to the ftp server, tried everything!
I just got 3 new laptops (Vostro 1520) Dell with Vista Home basic. I have internet exlorer 8 installed and firefox with fireftp. IM aware of the inability of windows to connect to ftp servers, or internet explorer 8 or windows Solution Explorer, but I was always able to connect to my FTP with fireftp. It is not the case with these machines... I open fireftp, plug my characteristics of the object and its says its trying to connect, but then returns with an error reading "unable to connect to the server. Please try again ". I also tried filezilla and smartftp and still nothing. I checked my server logs and my logs show even that my laptop has even tried to connect to the server, the laptop is not allowing the ftp request to even leave the computer. I even went into windows advanced configuration firewall and created new rules for port 21 ftp and still im even not get to the server.
I know that this isn't...
-My router settings
address of the server - ftp
-user name or password
-windows on Norton Firewall (attempted to extinguish both)IM completely drawing a blank as to what could be causing this, the server is configured to the standard port 21 so there is nothing extra needs to be done, as far as I know with whom.
Any advice would be appreciated thanks in advance.
Hi Laurenuser1,
Welcome to Microsoft Answers Forums.
There could be some third-party programs running in the background that can be interrupted.
You can try to start the computer in safe mode with networking to see if it works.
Steps to start in safe mode:
1 restart your computer if it is running.
2. tap on the F8 key after your initially on powers computer.
3. Once you see the menu Advanced Boot Options, you can stop tapping.
4. use the up/down arrow keys to highlight your selection.
5. Select Mode safe mode with networking and press ENTER.
6. you should see loading drivers and wait please.
7. you should then be at the Welcome screen.
8. connect to your computer using an account with administrator privileges.
If you still face the question thank you for posting your question on the MSDN site for more assistance:
The question you have posted is related to networking to the server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.
http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro
Hope this information is useful.
Let me know if it worked.
All the best!
Thank you, and in what concerns:
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Unable to connect to an FTP site using Verizon hotspot on a Droid phone.
to connect to an ftp site
try to connect to an ftp site using access point on a droid verizon mobile and can not. check the advanced settings of the internet all the ftp boxes are checked in the security
Check with the support of Droid.
-
Can anyone help?
Now, this is getting very frustrating.
I can connect to the internet and browse most Web sites. My email works fine but I can't connect to websites www.microsoft , Norton is 'unable to connect to the Live Update server, check the internet connection' and my media center can't find my internet connection.
What is going on?
I have a subscription to Norton who can't find any problems. I also downloaded onecare and trojan remover, returning with a clean report.
Please help before I go out what remains of my hair.
What about FrankHello
You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.
Check with this site
http://www.confickerworkinggroup.org/infection_test/cfeyechart.htmlAlert on the Win32/conficker virus
http://support.Microsoft.com/kb/962007Protect yourself from Conficker
http://www.Microsoft.com/security/worms/Conficker.aspxHow to remove the worm Downadup Conficker (Uninstall Instructions)
http://www.bleepingcomputer.com/virus-removal/remove-Downadup-ConfickerHow to manually remove the Conficker worm
http://www.411-spyware.com/Conficker-worm-removal#how-to-removeBDTool to remove
http://www.bdtools.NET/-----------------------------------------------
Run the malicious Microsoft removal tool, scan with Malwarebytes, Prevx to be sure you know all the
malware involved and if necessary use UnHackMe.Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows Update - if necessary, you can download it here.
Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
(Then run MRT as shown above.)Malicious removal tool from Microsoft
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMalwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
http://www.Malwarebytes.org/Here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------
Also do to the General corruption of cleaning.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------
Run Malwarebytes when you can.
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK
Close IE
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question. (Toolbars are BHO)
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlDon't forget to do:
Logon as administrator
Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN
Enter each of these one at a time and press ENTER after each
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
Reset
------------------------------------------------------Here are a few rootkits if it were a question:
SpyDLL Remover - free
http://securityxploded.com/spydllremover.phpAdvanced Windows Service Manager
http://securityxploded.com/winservicemanager.phpRun the Rootkit Revealer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspxUnHackme - trial
http://www.Greatis.com/UnHackMe/This shows how to use UnHackme and includes a link to version 2.5 – use it as a guideline and current
available as version above is 5.5
http://safecomputing.umn.edu/guides/scan_unhackme.htmlIceSword - free
http://www.AntiRootkit.com/software/IceSword.htm
Instructions and pictorial
http://securityxploded.com/IceSword.php
Tutorial for use of IceSword
http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3DRevo Uninstaller - free
http://www.revouninstaller.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Laptop has virus and still unable to connect to the Web site after his withdrawal.
Original title: laptop cannot connect to router
my daughter portable computer had bankerfoxa virus I think that I got rid of but she still can't connect on the website I want to download microsoft security essential on his cell phone how if I can not connect? pls help
Also try the following steps, you have a problem connecting to the Web sites.
Try to do a System Restore to an earlier date when your computer was working well and try to run a scan for malware removal.
Try to reset the Proxy settings to connect to the internet, as some malware enable proxy settings that block your ability to browse Internet sites.
To reset the Proxy settings:
Click Start-> in "search programs and files" type CMD-> in the programs in the list right click CMD and click 'run as administrator '.
In the command prompt, type the following and press ENTER:
NETSH WINHTTP RESET PROXY
Restart the computer
Touhami
-
Unable to connect to the ftp to EA4500 usb storage device
I am unable to connect to my hard drive on the EA4500 from a remote device (pc or mobile) using the ftp protocol.
The drive is a WD 1 TB and is supported. I use cisco smartwifi to set it up. The player is accsessable on my local network, capable of map and data flow of the connected player on all LAN devices. I have ftp on and implement a file secured with username and password. I tried to connect with the "filter anonymous internet customers' on and outside. I have reset the router 3 - 4 times. Maybe im does not connect make properly. WiFi Smart Displays the FTP server: ftp: / / 172.30.1.19:21. Whenever I try to connect to 172.30.1.19 port 21 in a web browser or ftp program, I get "cannot find server message. I've read through the forums and have not been able to find a solution. Help, please. Thank you.
So the fix for MY problem was just re-aranging my network would invest and the linksys as being the first unit WAN/LAN on the network of front loading.
-
Unable to connect to the Web site
I can get www.calphalon.com to load but am unable to connect. When I created the account, calphalon did exactly the same thing ebay-t - it does not recognize the security code even if it is correct. I did exactly what I do on Ebay when I ask a question to a seller - I use Internet Explorer. You have created calphalon account no problem and am able to sign in and out of my account without any problem with IE, but when I switch back to FF (updated 22), this is a go. With FF, the sign of the popup box is much too small and is completely empty. When I go to the tab of the client service to register a product (this is why I am on the site), I filled up on the sign in info on the page and the kickoff, nothing happens. It's as if I never hit the Send button. It does not seem to convey anything at all. I have signed up for newsletters, but cannot access my account on ff so it seems I'm going w/IE when I get on this site.
Hello
Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be you temporarily disconnect all sites, you're connected to.
To clear the cache and cookies to do the following:- Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
- Under "Time range to clear", select "all".
- Now, click the arrow next to details to toggle the active details list.
- In the list of details, see the Cache and Cookies and uncheck everything.
- Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .
This solve your problems? Please report to us!
Thank you.
-
Unable to connect to the BC site via dreamweaver CC 2014
All of a sudden I can't connect to one of my BC sites in Dreamweaver CC 2014
I get the error: "an FTP error occurred - cannot connect to the host." The remote host cannot be found. »
On the web, I can properly connect to the back end of the BC site with my credentials to mysite.businesscatalyst.com
I tried the following:
1 disabled the firewall and tried to connect through DW. Did not help.
2 boot safe mode with networking. Did not help.
3. in the Manager Site Dreamweaver, Site for mysite configuration, password box is empty. I can manually enter and click on 'test' and it connects fine.
4. when I leave the site manager and try to connect from the files tab and icon of the little plug, it does not work.
5. we forget the password and sometimes white in a re-opening of the Site Manager.
Hi guys,.
I just tested this question (of the BC point of view) and I think I understood what may be your problem - you have multiple sites defined in DW and some of them (those having the connection problem) do not belong to the Adobe Id of current user who is logged in DW.
The new CC authentication system is synchronized between your installed applications of CC. For any operation that requires authentication, current CC authenticated account credentials are used - it is also why doe of information of the site DW SFTP connection not stores the password more.
Workaround for this problem is to be registered for the DW with an Id Adobe user that is also stored in the settings of credentials SFTP site DW (BC) that you want to use.
There are two approaches to this:
1. change the current CC account that is signed in DW:
-disconnection of DW (using the menu)
-Connect with the Adobe Id which is the (partner) creator of the site
-restart DW (this is important!)
2. Add the Adobe Id account as an Admin user to the BC location:
-Add the Adobe Id account that you use in DW and other CC apps as the administrator user on the site of BC (go to settings of the Site from the site Admin-> Admin users)
-in DW, change the SFTP site connection settings (of the files Panel, double-click the drop-down menu display the site name and select servers, change the server list and simply replace the value of @adobe.com [myadobeId]of the user name field with the email in the current account of CC, which is signed in DW; you'll have something like) (: [myBCsite].worldsecuresystems.com/[myNewadobeId]@adobe.com/dw)
-Save settings (skip the password)
I hope this helps.
Ionut
-
Unable to connect to the Web site of 'report a problem '.
I'm having a strange problem signing on the Web page 'Report a problem' in order to report a problem with an application that I downloaded via the iTunes store. I went to purchase in the iTunes store on my computer, click report a problem for the application in the order and he took me to a Web page called 'Report a problem' and asked me to connect. However, I enter my information and click on connect, but the page just refreshes and doesn't connect. I know that my sign in information is correct (in addition to using it in iTunes, I just used to login here to post this question) and I came many times to just in case there was a typo in with my password. I tried a longer password and it gave me the error "your AppleID or your password was entered incorrectly" so he is grateful to my info... I tried to clear cookies and cache from my browser (Chrome). I also tried to use Internet Explorer and Edge to connect, but both had the same problem. I couldn't even find a way to contact Apple on this specific problem... their support menus not occurred for problems of website that I could find at least (if someone could point me to that, I can try that as well).
I had no problem connecting to https://reportaproblem.apple.com/ earlier. A temporary glitch perhaps?
TT2
-
Unable to connect to the facebook site.
I was using a wifi connection last weekend who had a few websites blocked so that you cannot access. Now that I'm home and using my wireless connection, that I didn't was not able to connect to facebook. He said that the site is not available. Any suggestions on how to correct the problem? Thank you!
Please contact the Facebook Support for help with this issue:
http://www.Facebook.com/help/?page=220217228006012
http://www.Facebook.com/help/
http://www.thefacebookforum.com/
-
Unable to connect on the web site or web mail
- Hi all, my main site named: www.amolmap.com/ and several days I can log my site and my webmail.amolmap.com and need help and support.
Hi Mr. Reza,.
It is most likely not a problem of malware on your end.
Please contact the technical support for the company that hosts your Web site. It probably is a problem, if everything else works.
Good luck!
Kosh
-
Unable to connect to the microsoft career site to apply for jobs
Unable to connect to the microsoft career site to apply for jobs, even with google, facebook, or linkedin
It redirects and come back with nothing invites me to reconnect
Help, please
Hello
We do not work for Microsoft.
We are mainly volunteers here.
I'm sorry, but this section of Microsoft, the Microsoft community, is dedicated to answering questions of posters on the hardware and software problems with their computers, computer hardware, etc.
This is all the information that we have.
http://careers.Microsoft.com/careers/en/us/get-help.aspx
Kind regards.
-
Unable to connect to a Web site? used several times before. says the dns server is incorrect or does not exsist? help someone?
If it is hosted by GoDaddy, it's maybe out of service. There is a DDoS (denial of Service) attack to GoDaddy for the moment.
You could try again later and see if it returns. -
Unable to connect to creative cloud but can connect to the adobe site... Please help
already done. without success. now chat with adobe helpdesk. Thank you
Maybe you are looking for
-
Product of activation key...
How can I activate my game of Mythology when I lost my product key for activation? I have all the disks has no product key number.
-
Size of minimum partition for recovery
Hi, I tried to install windows using HP recovery DVD (4 of them) on my 128 GB ssd, I got the error message saying that the minimum partition size is 140 GB and I can not continue, is it possible to get around this?
-
I use windows live for my emails, it was working well. but now I can receive but can't send emails. Thank you. I use windows 7
-
When I lock the screen with the top lock button the phone unlocks automatically when I receive a text or email. So his open in my Pocket there is so no point of the locking function if it does not work properly. I've recently updated to 5.0.0.979.
-
Mine is Compaq Presario CQ5320F desktop PC, Windows 7 64-bit, monitor showed no, 40 seconds after the computer starts, it starts making beep for 3 seconds, then pause 5 seconds, 3 seconds, then pause 5 seconds...