Unable to connect to the interface user APIC

Similar Questions

• After changing the orainventory place im unable to connect using the oracle user

  Hello

  IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses

  / u01/app/Oracle

  After making these changes im is no longer able to connect using the oracle user...

  also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...

  any help on this would be greatly appreciated

  Sadia. wrote:

  Hello

  IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses

  / u01/app/Oracle

  After making these changes im is no longer able to connect using the oracle user...

  also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...

  any help on this would be greatly appreciated

  Newer versions of oracle have implemented a great new technology to help solve problems, called "error messages."  Unfortunately, I can't find any reference to an error message named 'is no longer able to connect.

  And why you are moving your site from inventory?  When you have installed oracle, he put the inventory where he wanted.  There is no reason to try to change or replace.

• Unable to connect to the database, user and password name invalid

  Hello
  
  I am currently using discoverer of oracle 10g (10.1.2.3) and db 11.2.0.1, operating system RHEL 5
  
  Unable to connect to the DB of IAM Viewer
  
  It gives the name of user and password invalid
  
  the most recent activity that I performed was to import from another instance eul (version 5)
  
  I checked with the dbc file permissions
  
  anything else I might have to watch?

  PL re-post in the forum of discoverer - discoverer

  HTH
  Srini

• RRAS issues! -Unable to connect to the VPN users,

  original title: RRAS issues!

  Hi all, I have some real issues with my RRAS VPN. All of a sudden the users are randomly cannot connect to the VPN. Making mistakes like 619 800 and so on. I activated the GRE (once the problem starts) checked to see if the 1723 port is open. Why is this happening now?

  I use DynDns host name and everything seems fine, fact that there are enough ports available to PPTP on the RRAS.

  I am running Windows 2003 SBS SP2

  Router is a MAKO 6861 with a normal ADSL line

  I see this in the PPP.log:

  [8128] 06-04 10:27:27:794: Recv timeout event received for portid = 288, Id = 5, Protocol c021, fAuth = 0 =
  [8128] 06-04 10:27:27:794:
  [8128] 06-04 10:27:27:794:
  [8128] 10:27:27:794:
  [8128] 10:27:27:794: <06 57="" eb="" 0d="" 3e="" 07="" 02="" 08="" 02="" 0d="" 03="" 06="" 11="" 04="" 06="" 4e="" |.w..="">... N |
  [8128] 10:27:27:794:<13 17="" 01="" b0="" 09="" a5="" e1="" 15="" e6="" 49="" 4f="" 85="" fb="" 7c="" a0="" 15="">
  [8128] 10:27:27:794:

  And some of this:

  [8128] 06-04 10:27:43:325: line before the end event occurred on port 138
  [8128] 10:27:43:325 06-04: FsmDown event is received for Protocol c021 on port 138
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 9, Protocol is c021, EventType = 0, = 0 fAuth
  [8128] 10:27:43:325 06-04: FsmReset called Protocol c021, port = 138 =
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, = 0 protocol, EventType = 3, fAuth = 0
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, = 0 protocol, EventType = 7, fAuth = 0
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, = 0 protocol, EventType = 2, fAuth = 0
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, = 0 protocol, EventType = 1, = 0 fAuth
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, = 0 protocol, EventType = 4, = 0 fAuth
  [8128] 10:27:43:325 06-04: RemoveFromTimerQ called portid = 288, Id = 0, Protocol is c029, EventType = 0, = 0 fAuth
  [8128] 06-04 10:27:43:325: LcpEnd
  [8128] 06-04 10:27:43:325: line Post event took place on the port 138
  [8128] 06-04 10:27:43:325: NotifyCaller (hPort = 138, dwMsgId = 23)
  [8128] 06-04 10:27:48:043: line-up event took place on the port 138
  [8128] 06-04 10:27:48:043: PortName: VPN3-19
  [8128] 06-04 10:27:48:043: from PPP link with IfType = 0x0, 1p1f = 0 x 0, IPXIf = 0 x 0
  [8128] 10:27:48:043 06-04: RasGetBuffer returned 58 c 2148 to SendBuf
  [8128] 10:27:48:043 06-04: FsmInit called Protocol c021, port = 138 =
  [8128] 06-04 10:27:48:043: ConfigInfo = 80260
  [8128] 06-04 10:27:48:043: available APs = 2
  [8128] 10:27:48:043 06-04: FsmReset called Protocol c021, port = 138 =

  Hello

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Error TMS of Cisco "unable to connect to the repository user.

  Hello

  Has anyone seen this error before in Cisco TMS? I have not had anything change on my pc or in the environment, I am aware of... I am sailing to the system > Provisioning > users and this is where I get the error and has no user information. I guess that it is not broken, because I had zero complaints that it does not work correctly

  Thank you!!

  Have you checked that TMSPE service is running?

  Can connect to the SQL database of it is?  Use the tools of TMS on the server to check.

  What version of Java, the TMSPE and the MSDS you are running on the server?

• Unable to connect with the sysadmin user applications

  Hi all
  
  We cannot connect to applications with user sysadmin
  
  check all possible alternatives of there we cannot connect and finally we program the password by FNDCPASS
  
  VERIFIED SOLUTIONS:
  ==============
  (1) locked account - no.
  (2) Guest user password - valid and check with to validate the password function
  (3) checked tablespace APPS_TS_IDX space - enough space available
  (4) checked signon profiles all who are very well
  (5) No person changed the password before there is no activity for 2 days
  (6) active in fnd_users and all are looks good
  sysadmin 7) validation through fnd_web_sec
  
  Select apps.fnd_web_sec.validate_login ('SYSADMIN',' & pwd') of double; -display "N".
  
  Finally reset us the password with fndcpass but the customer claim the CAR for that matter
  
  Please give me your valuable inputs to this so that it will be useful in the future to support
  
  
  
  Thank you
  Pavan

  Hello

  So in my case the hash value has been changed according to the post above to right?

  In your case, the password has been changed and this has changed the hashed password that is stored in the table. When you have provided the initial password, the FND_WEB_SEC hash and compares with the hashed value and it returns N because the hash values do not match.

  Can U please tell me how this change in the hash if no users changed the password earlier?

  It represents the value has changed because the password has been changed or the hashed value has been changed manually.

  Thank you
  Hussein

• Unable to connect to the new user profile failed error user account

  I just created a new user account, but I can't open the new user accout I get an error indicating the failure of user profile, please help

  Hi lol123-179,

  ·         What is the exact error message?

  I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  http://support.Microsoft.com/kb/947215

  Method 2: Follow the steps in the article on how to fix a corrupted user account.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Unable to connect to the hpeprint user account.

  I registered my printer at hpeprint.com but later, I can't signin using the email address of the printer. The web page says "invalid email address" what should I do to access my account... Thanks for any response.

  Hi, to connect with HP ePrint Center, do not use your printer E-mail address.

  You must use your private E-mail address, that you used to create the account and the password you selected during registration.

  Kind regards

  Shlomi

• [ACI] Unable to connect after the initialization of the APIC

  With the sheet/spine uninitialized switch, APIC1-3, "configuration eraseconfig" has been created.

  Connection of the interface user was launched after the initial installation of the APIC-1.

  An error message appeared, as an image.

  "REST datastore user authorization endpoint is not initialized - check fabric composition State of this node of tissue.

  safsafs.PNG

  

  "After the error message above, the sheet/Spine selector" setup - clean - config.sh "was conducted.

  And then APIC-1 "eraseconfig setup" first. "

  However, there still is an error message.

  I want to solve this problem.

  If there is a way to solve this problem, please let me know in detail. (Step by step)

  Restoration of tissue AIT at the factory defects (the image is simply an overview of the attached PDF file.)  All the steps are in the PDF file.)

  Technical note - restoringfabric2factorydefaults_01.png

  

• Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

  I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

  I disconnected the USB hard drive and tried again diskmgmt, but no change.

  I restarted in safe mode, tried diskmgmt, but no change.

  I ran sfc/scannow, but it has reported that it found no errors.

  I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

  I tried again, but still not like before.

  Is there some dll I can't regsrv32?

  Thank you

  Marc

  Hello

  I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

  http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

  Note: it also applies to Windows 7.

  Hope the information is useful.

• Unable to connect to the MKS: (name of user and password) Login incorrect

  I am trying to use the VMware workstation 12, connect to the server feature but I get this error message.

  My desktop pc (host) is running windows 7 and running VMware workstation 12. I shared one of my virtual machines. I have activate port, 443, 902 and 903 on my router. I temporarily disabled my firewall.

  When I try to connect to my laptop running Kubuntu and Vmware workstation 12 host, I am able to connect to the host, I am able to see my shared VM and I am able to turn on and off but that's about all. I can not actually use the virtual machine, because I get the message in the title.

  Can someone help me? Thank you.

  Found a solution.

  In the host (windows)

  Open Notepad as administrator

  Edit the file in:

  C:\ProgramData\VMware\VMware Workstation\config.ini

  Change:

  Authd.client.port = "903".

  TO:

  Authd.client.port = '902 '.

  Save

  Unable to connect to the MKS: Login (user and password name) incorrect - Spiceworks

• Unable to connect to the printer via IP address

  I changed my ISP (internet service provider) and therefore changed routers - now unable to connect to the printer.
  I put a static IP address on my HP Photosmart B110a printer before we changed to ISP because there are connection problems. When we were setup to the ISP again, we are unable to connect to the printer, such as the printers IP 192.168.1.12
  The new network ISP IP range is 192.168.0.xx and printers address IP is out of the network.
  I can print via the USB cable but I can't return to my printers GUI by entering 192.168.1.12 return the printer back from the static IP address.
  A hard reset for this printer would be appreciated.
  Thank you very much.

  Hello
  I solved the problem. The answer was staring face heres so my solution for someone who has had similar problems.
  I didn't dig up the old router that affects the 192.168.1.xx IP network and then connected my PC, connected my printer then connected printers user interface through the static IP address, I assigned earlier. Changed to automatic IP. Connected my new router (which assigns the IP addresses of 192.168.0.xx) to my PC and printer. Everything is now OK.
  Thank you.

• UPGAST-00155] [update. Framework] unable to connect to the account of the ODI supervisor: SUPERVISOR.

  We get this error when running upgrade wizard at level for ODI 11.1.1.1.6.

  UPGAST-00155] [update. Framework] [tid: 11] [ecid: 0000K8ft44ECcpGLIy9Dif1IUS8Z000002, 0] unable to connect to the account of the ODI supervisor: SUPERVISOR.

  A given SUPERVISOR/SUNOPSIS for credentials in the user interface

  Is there a file where the password is cross checked and need a change. Please advice

  You can follow the steps below to update the supervisor password

  use file encode.bat available in the location of oracledi\agent\bin

  Encode

  then run the following update query.

  UPDATE SNP_USER SET PASS ='' WHERE WUSER_NAME = "CONTROLLER";

  Chantal

  http://dwteam.in

• [RESOLVED by itself] Firefox Sync: unable to connect to the server for 12 hours now

  New installation of Windows 7 64 bit
  New installation of Firefox 28

  Is my sync configuration, enter the user, pass & recovery key.
  It hangs on the audit for more than five minutes.

  Then displays error: unable to connect to the server
  See the screenshots: http://i.gyazo.com/0d19d680eae937fa27ace5df59caaa5d.png

  This happened during the last 12 hours.

  The State of the system (https://services.mozilla.com/status) Says:
  "The Firefox Sync service is running normally.
  There is no known issues at this time. '

  I tried to disable the firewall and I use MS Security Essentials.

  Please advise?
  Thank you.

  This issue is resolved itself today.

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.