Unable to connect to the server esxi vm via http
I have installed esxi 3.5.0 update 3 on a hp dl380 g3 6 GB ram server. The installation was successful, and I set up an ip address and the root password.
When I connect at this http://ipaddress/ , I get a request to enter the user name and password with the following in the window
The server & lt; address ip & gt; level_15_access requires a user name and password.
WARNING: This server is request your username and password sent precariously (basic without a secure connection).
I enter the user name & lt; root & gt; and the password, but the guard window reappear. Finally, I get the following error: 401 Unauthorized
Please can someone help?
Thank you
It would be vCenter Server. The path above is actually on your install ESXi - if you enable SSH you could get to it.
Tags: VMware
Similar Questions
-
New installation of Windows 7 64 bit
New installation of Firefox 28Is my sync configuration, enter the user, pass & recovery key.
It hangs on the audit for more than five minutes.Then displays error: unable to connect to the server
See the screenshots: http://i.gyazo.com/0d19d680eae937fa27ace5df59caaa5d.pngThis happened during the last 12 hours.
The State of the system (https://services.mozilla.com/status) Says:
"The Firefox Sync service is running normally.
There is no known issues at this time. 'I tried to disable the firewall and I use MS Security Essentials.
Please advise?
Thank you.This issue is resolved itself today.
-
Hello
I can not connect to servers SnapChat
IOS 4.2.1
iPhone 3G
Error message:
Unable to connect to the server. Please try again later
Thank you for your time and understanding.
Hello!
It seems that you can not use your SnapChat the way app which you should be. I would use the troubleshooting steps in the following article for third-party applications. You may well reach out to the developer if the problem is not solved by the article though:
If an application you have installed unexpectedly closes, unresponsive, or does not open
Thank you for using communities of Apple Support.
-
The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube. This happens when I use Safari, Firefox and Chrome. Yet if I'm in Safe Boot mode it works fine. I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked. I'm not very computer savvy either so don't know much of what I do with this technical stuff. I emptied the caches, but that did not work. Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test. I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below. Help, please!
The system version: OS X 10.11.1 (B 15, 42)
Kernel version: Darwin 15.0.0
Boot Mode: Normal
Model: MacBookPro11, 1
FileVault: on
The System Diagnostics
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
Diagnosis of the user
2016-04-12 AssetCacheLocatorService crash
Accident of GarageBand 2016-04-12
Kernel messages
Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019
Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level
Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit
Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052
12 apr 17:20:51 0xe00002db questioned the file opening error
-the last message repeated 1 time.
Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066
Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level
Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit
Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476
Apr 12 21:54:58 opening error 0xe00002db questioned the file
-the last message repeated 3 times.
Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988
Hi AussieEgypt,
Thank you for using communities Support from Apple.
If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac. Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:
Test your login items
Choose the Apple menu > System Preferences, and then click users and groups.
Click on your account under the current user name, and then click connection points.
Make a list of the login items, you will need to remember later.
Select all the elements of connection, and then click the button Delete .
Choose the Apple menu > restart.
If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.
If the problem persists, follow the steps above to remove only the last element of connection that you added.
OS X El Capitan: If you think you have incompatible connection points
See you soon.
-
'Unable to connect to the server' after updating to iOS 9.3
After updating my iPhone 6 more for iOS 9.3 I get the message "unable to connect to the server. I can't connect to iCloud more!
It's your phone antivirus. If you have an application like 'disconnect' you must remove it and then you can connect and reinstall.
-
Unable to connect to the server
I have an officejet pro 8600plus. When I bought it, I have activated ePrint and registered my printer, but never used the feature. Since then, I updated from XP to windows 8.1, changed a router and connected the printer through a series of switches on a wired ethernet connection. A few days ago, I tried to use e print but received a message that I couldn't connect to the server.
my printer prints fine, connects to each computer on my home network, I just upgraded the firmware with success to [personal information deleted]
and yet, for more than three days, unable to connect to the server. I even deleted my account eprint printer, after changing his email successfully, but now I can not add new, I can't get the code because I can't activate the web plus services. I can scan from the printer to files network and all, but can't seem to activate eprint.can anyone help?
Thank you
Gill
Hi the gills.
Welcome to the HP Support forums. I think since upgrade to 8.1 Windows and change your printer router cannot connect to web services to get the job of ePrint feature.
Please define Manual of the printer an IP address manually and DNS servers. I've included a link to another post, I did it with the stages (including screenshots) how to do it.
-
Unable to connect to the server appleid in el capitan?
Whenever I try to connect to the App Store, iTunes Store or iCloud, I get an error message unable to connect to the server appleid. This all started as soon as the upgrade to El Capitan on my Macbook Pro, that is in late 2011 with 16 GB of ram and 1 TB of hard drive. It was working fine before the upgrade.
If the firewall is enabled, please disable it in the component of security & confidentiality of system preferences. First of all, you need to unlock the settings by clicking on the padlock icon and entering your administrator password.
-
How can I subscribe to nesgroups - get an error unable to connect to the server
Attempted to subscribe to newsgroups, but get an error message - unable to connect to the server. What I am doing wrong?
msnews and msn newsservers and groups are gone. There are a few free newsservers, such that news://nntp.aioe.org , but a pottery forum is empty. There are also some newsservers that you can pay for. You could try emailing somone who already contacted you in the other forums to see if they have suggestions and what they are doing in this regard.
Steve
-
After a virus attack, I am unable to connect to the server from any client computer.
I have a small net work in my house, and until yesterday, the network works well. MSSE has cleaned up win32 virus attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. Infographic customer request user LRN & passwiord against which I entered the data from the server connection, but it displays the sdame error message. PL help someone who will be widely recognized.
Thank you best regards &.
Gandhi Prasad
original title: connection from the Client to the network problem
Hello
Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public Server on TechNet. Please post your question in the Windows Server Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
After an attack of virus on the server, I am unable to connect to the server from any client computer.
I have a small net work in my house, and until yesterday, the network works well. MSSE clean virus win32 on my server attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. I used MS Fixit widjows firewall and then problem determination after the Client computer request user name & against which I entered the login data, password but it displays the same error message.
PL help someone who will be widely recognized.
Thank you best regards &.
Gandhi Prasad
Hello
Because the problem is with the server, I recommend you post this question in the TechNet forum.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
-
Unable to connect to the server of Q10 blackBerry voice control
as the title suggests, whenever I try to use the voice command it runs for about 20 seconds and then says: "unable to connect to the server of voice control.
its been doing this all day, but worked well before that date.
Ive done the usual battery pull but still the same but it now say that I have no wifi connection. ive never used wifi that shouldn't have anything to do with it.
any ideas please.
Well Yes, same here. everything works again.
-
Error network [10061]: unable to connect to the server
Hello
I use version 11.1.1.3 to Hyperion. I'm not able to start the Essbase Server services after you restart the server and get the error message below when trying to connect to the Regional service. Other Foundation services are running.
Error:"Network error [10061]: unable to connect to the server." The customer has expired waiting to connect to Essbase Agent using the TCP/IP protocol. Check your network connections. Also, make sure that the values for server and port are correct. »
Is this issue related to the corruption of Essbase security files? Please could you help me solve this problem.
Thank you
Michel K
Yes... Essbase security file is corrupted. I have restored back file and be able to start the Essbase Server services.
This is the second time I'm getting this question in the last week. Please could you let me know the reason of corruption of Essbase security files.
Thank you
Michel K
-
CC so that he was trying to install updates is unable to connect to the server. What should I do? This is what it looks like.
Check your hosts file.
help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
How to connect to the server ESXI vSphere Client side WAN?
How to connect to the server ESXI vSphere Client side WAN?
through firewall
I tried to open the ports 902 903, 443... and so on...
and I tried several sites to find the solution but...
nothing works...
connectivity works on local network
Help, please...
Source Destination Port
ESXI 443/TCP client
ESXi 902/TCP client
ESXi 902/TCP Client
ESXi 902/UDP Client
ESXi 903/TCP client
Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:
Example:
See attachment...
-
CC libraries sync - unable to connect to the server
I'm trying to work and the page that opens indicates page not found. So I went into the control panel and the synchronization icon tells me that I am unable to connect to the server. Internet works fine.
See the bottom of this thread (CC - unable to connect to the server libraries) to see if that helps you as well. Entry #19
Maybe you are looking for
-
Removal, reboot and reinstall 3.6.28 solves the problem. The slowness is expressed during the change of pages and/or srolling.The computer is lightweight Vaio VPCX11S1E w / SSD 128 GB, 2 GB of RAM, Awast antivirus and firewall Zone Alarm.No private p
-
Product for 1800 PS181A - 009S 9 recovery CD?
I have a Satellite 1800 model no PS181A - 009S 9.Anyone know how I can get my hands on a recovery of product for this model CD?Toshiba website does not list this model only.See you soon
-
Satellite L650-12 q - external monitor through HDMI problem after waking up
Hello My problem is that after external monitor goes to sleep and then wakes up again the image on the screen is bigger than the screen acctualy. This means that I don't see a part of the image (my office) as part of the taskbar and my settings is ch
-
POUVEZ, NOR-CAN1500, POUVEZ Labview drivers
Hello I am currently using Labview 64 2015 on win 7 64 bit. When loading NICAN1500.exe (CAN labview drivers) it forces me to load it in the Program Files (x 86) folder. LabVIEW is installed in Program Files (without x 86) After loading it in x 86 dri
-
Windows vista retrieved e-mail folders
2 files with the same name I.e. sent items how to remove one.tried to change the name that did not also recovered files has lost most of the emails.